A predictive model of the critical undeformed chip thickness for ductile-brittle transition in nano-machining of brittle materials

作者：Arif Muhammad^*; Zhang Xinquan; Rahman Mustafizur; Kumar Senthil

来源：International Journal of Machine Tools and Manufacture, 2013, 64: 114-122.

DOI：10.1016/j.ijmachtools.2012.08.005

• Ductile-mode machining
• Specific cutting energy
• Ultraprecision machining
• Silicon machining

There is a distinct transition in the mode of material removal in machining of brittle materials if the undeformed chip thickness is below a critical threshold of submicron scale. It is believed that at such small scale of material removal, the energy required to extend pre-existing flaws in the microstructure of brittle material exceeds the energy required to mobilize the micro-structural dislocations and hence plastic deformation serves as the dominant mode of material removal. It is postulated that a transition in the mode of material removal in machining of brittle materials is accompanied by a corresponding shift in the representative mode of energy expenditure. Hence, machining energy is a viable parameter to characterize the modes of material removal in machining of a brittle material. This paper presents a specific cutting-energy based model to predict the ductile-brittle transition point in ultra-precision machining of brittle materials. The energy expended in brittle and ductile modes of machining is modeled as a function of work-material intrinsic properties. tool geometry and process parameters. The transition point is identified in terms of undeformed chip thickness at which the mode of energy undergoes a transition from the plastic deformation based one to the fracture based one. The validity of the proposed model is verified by single-edge cutting tests on single-crystal silicon and BK7 glass. The experimental results are found in good agreement with model results.

• 出版日期2013-1