Home
|
Learning Center
|
中文版
Publications
站内成果搜索:
搜索
Analysis of electromagnetic scattering characteristics of the reentry vehicle based on equilibrium flowfields
Analysis of ultra-broadband metamaterial absorber based on simplified multi-reflection interference theory
Analytical and numerical Gubser solutions of the second-order hydrodynamics
Analytic solutions of the relativistic Boltzmann equation
Analysis of transverse vibration response and instability of flexible spinning flight vehicles under follower thrust
Analysis and compensation for the effect of code Doppler frequency in PMF-FFT algorithm
Analysis on stability of shallow buried and bias tunnel with different slope in loess
Analyzing the travel time of car-following model on an open road
Analysis of the contact and friction force behaviour between different indenter shape and substrate on atomic scale
Analysis of periodic structures using improved spectral FDTD and GPU computing
Analysis of dielectrophoresis force used for matching detection
Analytical gradient-based optimization method for low-thrust transfer trajectories
Analysis of flowout gas field simulations and ignition methods for sulphuric gas wells
Analysis of Linux kernel as a complex network
Analysis of the Long-Term Corrosion Behavior of X80 Pipeline Steel in Acidic Red Soil Using Electrical Resistance Test Technique
Analytic estimation and numerical modeling of actively cooled thermal protection systems with nickel alloys
Analysis of dynamic characteristics of fixed-wing dual-spin projectiles
Analysis and compensation of mass imperfection effects on 3-D sensitive structure of bell-shaped vibratory gyro
Analysis of vehicle handling and stability of four wheel steering
Analysis on leakage characteristics of ball piston pair considering variable viscosity
Analysis of uncertainty in visibilty samples via average correlation in a synthetic aperture interferometric radiometer
Analysis of Bisphenol A, Nonylphenol, and Natural Estrogens in Vegetables and Fruits Using Gas Chromatography-Tandem Mass Spectrometry
Analyzing exerted forces on a roll system of 20-high Sendzimir mill in rolling process
Analysis of reactive hot spot for thermite under shock waves
Analysis and experiment of small size magnetorheological fluid damper for time delay
Analysis of temporal and spatial trends of hydro-climatic variables in the Wei River Basin
Analysis of temporal power spectra for optical waves propagating through weak anisotropic non-Kolmogorov turbulence
Analysis and calibration of stage axial vibration for synchrotron radiation nanoscale computed tomography
Analysis of catastrophic bifurcation of three-phase PWM rectifier
Analysis of ultraviolet radiation characteristics of solid propellant rocket motor exhaust plume
Analysis Techniques of Lattice Fringe Images for Quantified Evaluation of Pyrocarbon by Chemical Vapor Infiltration
Analysis of Surface Wettability of Synthetic Magnetite
Analysis of the effects of evaporative cooling on the evaporation of liquid droplets using a combined field approach
Analyzing the consistency of business process based on behavioral petri net
Analysis of Circulating Current Loss for High-Speed Permanent Magnet Motor
Analysis of frequency domain frame detection and synchronization in OQAM-OFDM systems Advances in Flexible Multicarrier Waveforms for Future Wireless Communications
Analytical and experimental study on complex compressed air pipe network
Analysis of angular-error uncertainty in planar multiple-loop structures with joint clearances
Analysis of Magnetic Take-Up Roll Employed in Amorphous Alloy Ribbon Production Line
Analysis and Experimental Kinematics of a Skid-Steering Wheeled Robot Based on a Laser Scanner Sensor
Analysis of hydro-mechanical deep drawing and the effects of cavity pressure on quality of simultaneously formed three-layer Al alloy parts
Analysis of the Flow Field of Carrier-Based Aircraft Exhaust Jets Impact on the Flight Deck
Analysis on variable nozzle turbine performance influenced by multiple factors under pulsating flow conditions
Analysis of driving efficiency for LRV wheels using forced-slip method
Analysis of Synchronization Impairments for Cooperative Base Stations Using OFDM
Analysis on charge and discharge mechanism of the modified lithium iron phosphate positive material
Analytical Models for Predicting Penetration Depth During Slot Die Coating onto Porous Media
Analysis of the effect of trim angle on the resistance characteristics for wheeled amphibious vehicle
Analysis of energy transfer process based emission spectra of erbium doped germanate glasses for mid-infrared laser materials
Analysis of catechol quinoline substance in corpus striatum and hippocampus from brains of diabetic rat models by HPLC-MS
Analysis on reliability for explosive initiator based on sensitivity
Analysis of bus driving cycle and investigation of bus emission characteristic
Analysis and solutions for the abrasion of the cupreous block on AMT
Analysis on the effects of material models on wall thickness variation of tube bending based on numerical simulation
Analysis of ejection after-effect for underwaterlaunched emulating missile
Analysis of traffic data based on ARMA-TS-GARCH finite mixture model
Analysis of the Development of China's Marine Renewable Energy Industry
Analysis of transient radiative transfer in two-dimensional scattering graded index medium with diffuse energy pulse irradiation
Analytical solution of cross polarization dynamics
Analysis of lubricating performance for involute gear considering tribo-dynamic behavior
Analysis and improvement of actual sampling system in fractional Fourier transform domain
Analysis of the Anomalous Phenomenon in the Retarding Potential Analyzer Measurements
Analysis and simulation for tensile behavior of anisotropic open-cell elastic foams
Analysis of the Effect of Interference on InSAR
Analysis of the Hybrid Power System for High-Altitude Unmanned Aircraft
Analysis and application of a compact multistep ADI solver for a class of nonlinear viscous wave equations
Analysis of edge crack behavior of steel sheet in multi-pass cold rolling based on a shear modified GTN damage model
Analysis of Aesthetic Communication Barriers in English Translation of Classic Chinese Poetry
Analytical-performance improvement of laser-induced breakdown spectroscopy for steel using multi-spectral-line calibration with an artificial neural network
Analysis on explosion dispersal mechanism of the thermobaric explosive
Analyzing trip cost allowing late arrival under car-following model
Analysis of High Alert Medication Knowledge of Medical Staff in Tianjin: A Convenient Sampling Survey in China
Analysis of fluid pressure, interface stresses and stress intensity factors for layered materials with cracks and inhomogeneities under elastohydrodynamic lubrication contact
Analytical model of optical path difference in an end-pumped Yb:YAG thin-disk laser with nonuniform pumping light
Analysis of WNT4 polymorphism in Chinese Han women with endometriosis
Analysis of Dispersion Characteristics of an Infinite Cylindrical Shell Submerged in Viscous Fluids Considering Hydrostatic Pressure
Analysis of the Breakdown Characterization Method in GaN-Based HEMTs
Analysis and Design of Loop Gains to Optimize the Dynamic Performance of Optical Voltage Sensor Based on Pockels Effect
Analysis and numerical modeling of a 20W microwave electrothermal thruster
Analytic descriptions of cylindrical electromagnetic waves in a nonlinear medium
Analysis of Social and Genetic Factors Influencing Heterosexual Transmission of HIV within Serodiscordant Couples in the Henan Cohort
Analysis and compensation of stiffness in cnc machine tool feed system
Analysis of the genetic diversity and population structure of Perinereis aibuhitensis in China using TRAP and AFLP markers