Home
|
Learning Center
|
中文版
Publications
站内成果搜索:
搜索
Analyzing the transmitted and stored energy through multilayer protective fabric systems with various heat exposure time
Analysis and optimization for automated vehicle routing on a single loop
Analysis of In Situ Mechanical Properties of Phases in High-Alloyed White Iron Measured by Grid Nanoindentation
Analytical and simulation-based comparison between traditional and Kalman filter-based phase-locked loops
Analysis, Design, and Estimation of Linear Equality-Constrained Dynamic Systems
Analysis on the transient heat transfer process inside and outside the borehole for a vertical U-tube ground heat exchanger under short-term heat storage
Analysis of effect of nicotine on microbial community structure in sediment using PCR-DGGE fingerprinting
Analysis of sources of heavy metal contamination in road-deposited sediment from Zhenjiang
Analysis on changes in coastline and reclamation area and its causes based on 30-year satellite data in China
Analysis of the Appearance Diameter of Yarns in Worsted Fabrics
Analysis method for corrugated steel web beam bridges using spatial grid modelling
Analytical model and experimental validation of the local damage mechanism of solid lubricant films for metal matrix self-lubricating composites
Analysis of ablation properties of piston of Al2O3fiber reinforced Al-Si alloy composite material
Analysis of motion accuracy reliabilityfor arc welding robot based on ADAMS/View
Analysis of accelerated degradation of a HT-PEM fuel cell caused by cell reversal in fuel starvation condition
Analysis and optimization of TSV–TSV coupling in three-dimensional integrated circuits
Analysis of common-mode electromagnetic interference noise in a flyback converter using a self-supply power control integrated circuit
Analysis of axial magnetic field of an iron style bipolar axial magnetic field vacuum interrupter
Analysis of a disc brake high frequency squeal and reduction
Analysis of heat exchanger network for temperature fluctuation
Analysis of the factors affecting the magnetic characteristics of nano-Fe3O4 particles
Analysis of Filtering Methods for Satellite Autonomous Orbit Determination Using Celestial and Geomagnetic Measurement
Analysis of the influencing factors of users'switching intention in the context of one-way mobile number portability
Analysis and discrimination of ten different sponges by multi-step infrared spectroscopy
Analysis of excess pore water of grouted mciro-piles with PVDs ground treatment method
Analysis of resistance-related proteins in rice against brown planthopper by two-dimensional electrophoresis
Analysis and calculation of the hydrodynamic force of lifting pipes in a 1 km pilot-scale mining system of polymetallic nodules
Analysis of characteristics of a pneumatic miniature robotic system
Analysis of Run-to-Run Variation of Bar-Coded Pyrosequencing for Evaluating Bacterial Community Shifts and Individual Taxa Dynamics
Analysis of resonant-cavity-enhanced-photodetectors considering the inter-layer refractive index differences
Analyzing multiple crack propagation using extended finite element method (X-FEM)
Analysis of influencing factors on the performance of single chamber direct microbial fuel cell
Analysis of pollutant exposure of pedestrian in urban street
Analysis on observing optimization for the wind-driven circulation by an adjoint approach
Analysis of principle structure and pressure field of desalination engine based on rotating electromagnetic effect
Analysis of small interfering RNA by capillary electrophoresis in hydroxyethylcellulose solutions
Analysis coaxial ridged disk-loaded slow-wave, structures for relativistic traveling wave tubes
Analysis of measurement error for electric energy metering system under harmonic conditions
Analyses on the electromagnetic shielding properties of enclosure with aperture array using finite-element time-domain method
Analysis of Dynamic Cantilever Behavior in Tapping Mode Atomic Force Microscopy
Analysis of two dimensions sparse multicylinder scattering problem using DD-FDTD method
Analysis for rutting deformation of asphalt pavement based on accelerated pavement testing with MLS66
Analysis of the simulated different-class Meiyu precipitation and associated circulation by the BCC_AGCM2.0.1
Analysis of beat noise in coherent and incoherent time-spreading OCDMA
Analysis of a crankshaft fatigue failure
Analysis of the adsorption characteristics of hydrogen molecules on activated carbon
Analysis on influential factors of loose coal thermal conductivity test accuracy
Analysis of the frequency spectrum of a simultaneous range-gate-pull-off and velocity-gate-pull-off jamming signal
Analysis of location precision when using a dual subsurface-buoy system with a vector hydrophone
Analysis on precipitation and potential evapotranspiration seasonality in China 1956-2010
Analysis of volatile compounds in Chinese Laobaigan liquor using headspace solid-phase microextraction coupled with GC-MS
Analysis on postural stabilization from visual feedback through Brownian motion modeling
Analysis of stress wave effect during rock breakage process by ultra-high pressure water jet
Analytical solutions of strain of axisymmetric curved part in sheet metal forming process using direct integral method
Analysis on technical line loss of distribution network
Analysis of In Vitro Aptamer Selection Parameters
Analysis of 13Cr bloom solidification structure using CA-FE model
Analysis of vibration caused by prefabricated pile's dynamic driving
Analysis of visual search patterns with EMD metric in normalized anatomical space
Analytical models of on-resistance and breakdown voltage for 4H-SiC floating junction Schottky barrier diodes
Analysis of Real-Time Estimation Method Based on Hidden Markov Models for Battery System States of Health
Analytical solutions to piezoelectric bimorphs based on improved FSDT beam model
Analysis of amplitude-phase errors in bistatic MIMO radar based on ESPRIT
Analysis of the location for peak heating in CHP based combined district heating systems
Analysis on residual coarse sediment transport in estuaries
Analytical analysis of a novel double layer halbach permanent magnet array
Analysis of asymmetrical coplanar strip lines with finite boundary substrate
Analysis of surface air temperature warming rate of China in the last 50 years (1962-2011) using k-means clustering
Analysis on Global Asymptotical Stability of Genetic Regulatory Networks with Time-Varying Delays via Convex Combination Method
Analytical system modeling method for SPECT based on the Boltzmann transport equation
Analysis of lncRNAs expression in UVB-induced stress responses of melanocytes
Analysis on parameter sensitivity of fuel injection consistency in common rail injector based on Monte Carlo method &RSM
Analysis of Bacterial Populations in the Environment Using Two-dimensional Gel Electrophoresis of Genomic DNA and Complementary DNA
Analysis on high temperature performance of SA508-3 steel for nuclear power
Analysis of strand-specific RNA-seq data using machine learning reveals the structures of transcription units in Clostridium thermocellum
Analysis of bedding landslide of cutting slope in an expressway and its treatment
Analysis of saturated and unsaturated seepage of cracked expansive soil
Analysis of initial cracking behavior of expansive soil due to evaporation
Analysis of EEG basic rhythms based on discrete harmonic wavelet packet transform
Analysis on impact of node failure in software execution network
Analysis of the integrated performance and redundant energy of CCHP systems under different operation strategies
Analysis of Light Gathering Abilities of Dynamically Solidified Micro-lenses, and Their Implementation to Improve Sensitivity of Fluorescent PCR Micro-detectors
Analysis of the relationship between international cooperation and scientific publications in energy R&D in China