Home
|
Learning Center
|
中文版
Publications
站内成果搜索:
搜索
Preparation and characterization of regenerated fiber from the aqueous solution of Bombyx mori cocoon silk fibroin
Preparation and characterization of regenerated Bombyx mori silk fibroin fiber with high strength
Preparation and characterization of regenerated Bombyx mori silk fibroin fiber containing recombinant cell-adhesive proteins; nonwoven fiber and monofilament
Preparation of WO3 films with nanoporous structure
Preparation and evaluation of nonphosphate terpolymer as scale inhibitor and dispersant for Ca3(PO4)2, BaSO4, and Iron (III) hydroxide scales
Preparing Uniform-Thickness Corneal Endothelial Grafts from Donor Tissues Using a Non-Amplified Femtosecond Laser
Preparation and properties of aqueous epoxy dispersion based on sulphonate
Preparation of PCL/graphene composite nanofibers by electrospinning
Preparation and luminescence properties of Eu2+-doped BaSi2O5 glass-ceramics
Preparation of Tetrasubstituted 3-Phosphonopyrroles through Hydroamination: Scope and Limitations
Preparation and study of tramadol imprinted micro-and nanoparticles by precipitation polymerization: Microwave irradiation and conventional heating method
Preparation and properties of B-site Zn2+ substituted CaCu3Ti4O12 ceramics
Preparation of ethylene/alpha-olefins copolymers using (2-RInd)(2)ZrCl2/MCM-41 (R:Ph,H) catalyst, microstructural study
Preparation and characterization of Ag-doped TiO2 nanomaterials and their photocatalytic reduction of Cr(VI) under visible light
Preparation and electrochemical characteristic of porous NiO supported by sulfonated graphene for supercapacitors
Preparation and ac electrical characterizations of Cd doped SnO2 nanoparticles
Preparation and desulfurization properties of activated carbon from sewage sludge modified by γ-alumina membrane
Preparation and Characterization of Microparticles Containing Simvastatin Solid Dispersions in Eudragit E 100 and Poly(3-Hydroxybutyrate)
Preparation and performance evaluation of glucomannan-chitosan-nisin ternary antimicrobial blend film
Preparation and temperature effect on the swelling behavior of konjac glucomannan - methylcellulose blend film
Preparation and characterization of polyurethane microcapsules containing n-octadecane with styrene-maleic anhydride as a surfactant by interfacial polycondensation
Preparation of amorphous rare-earth films of Ni-Re-P (Re=Ce, Nd) by electrodeposition from an aqueous bath
Preparation of amorphous rare-earth alloys of Ni-RE-P(RE=Ce, Nd) from aqueous solutions by electrodeposition
Preparation and Characterization of Poly(ethyl hydrazide)-Grafted Oil Palm Empty Fruit Bunch Fibre for the Removal of Cu(II) Ions from an Aqueous Environment
Preparation and characterization of anionic pullulan thermoassociative nanoparticles for drug delivery
Preparation, thermal and mechanical properties of POSS epoxy hybrid composites
Preparation of nanocapsules loading thyme essential oils and its antimicrobial effect against leather
Preparation of a kind of reactive pour point depressant and its action mechanism
Preparation and Characterization of Light-Switchable Polymer Networks Attached to Solid Substrates
Preparation of an ecofriendly chitosan-ZnO composite for chromium complex dye adsorption
Preparation and Electrochemical Performances of Samarium Substituted LiSm1-xNixO2 (0.00 > x > 0.20) Cathode Materials for Rechargeable Lithium-Ion Batteries
Preparation and optical characterization of PbSe quantum dot-doped silicate glass with high concentration
Preparation and spectra of CdSe-quantum-dot-doped PMMA fiber materials
Preparation and characterization of benzylated fir powder/PP composites
Preparation and performance of chemical vapor deposition diamond coatings synthesized onto the cemented carbide micro-end mills with a SiC interlayer
Preparation and Characterization of Polyaniline N-Grafted with Poly(ethyl acrylate) Synthesized via Atom Transfer Radical Polymerization
Preparation of homogeneous CNT coatings in insulating capillary tubes by an innovative electrochemically-assisted method
Preparation of ZnO:(Al, La)/polyacrylonitrile (PAN) nonwovens with low infrared emissivity via electrospinning
Preparation and characterization of alpha alumina nanoparticles by in-flight oxidation of flame synthesis
Preparation and characterization of novel Ln (Gd3+, Ho3+ and Yb3+)-doped Bi2MoO6 with Aurivillius layered structures and photocatalytic activities under visible light irradiation
Preparation of polybutylcyanoacrylate encapsulated rose fragrance nanocapsule
Preparation and structural characterization of nanocrystalline poly(vinyl chloride)
Preparation and properties of compatibilized PVC/SMA-g-PA6 blends
Preparation of pH sensitive insulin-loaded nano hydrogels and evaluation of insulin releasing in different pH conditions
Preparation of caesium-substituted phosphomolybdic acid via solid-state ion exchange method
Preparation and thermoelectric properties of reduced graphene oxide/PEDOT:PSS composite films
Preparing the next generation of concrete construction professionals: The Concrete Industry Management degree
Preparation and characterization of novel derivatives of chitosan and trimethyl chitosan conjugated with dipeptides and vitamin B12 as candidates for oral delivery of insulin
Preparation of synthesized sulfide polymer through phase-transfer catalyzed polycondensation of ethylene dibromide and sodium tetrasulfide: characterization, thermal and rheological properties
Preparation and characterization of self-assembled chitosan nanoparticles for the sustained delivery of streptokinase: an in vivo study
Preparation of Hybrid AHO-POSS/Polypropylene Nanocomposite Monofilaments by Radiation Induced Grafting
Preparation and Characterization of Dendrimer-Derived Bimetallic Ir-Au/Al2O3 Catalysts for CO Oxidation
Preparing for Patient-Centered Care: Assessing Nursing Student Knowledge, Comfort, and Cultural Competence Toward the Latino Population
Preparation of Co-Mo supported multi-wall carbon nanotube for hydrocracking of extra heavy oil
Preparation and evaluation of unpleasant taste-masked pioglitazone orally disintegrating tablets
Preparation of SnPb solder bump by electroplating process
Preparation of salt-resistant konjac glucomannan absorbent resin
Preparation of Starch-Fatty Acid Modified Clay and Its Application in Packaging Papers
Preparation of SiO2 xerogel and investigation of its calcining characteristic
Preparation of pure SnO2 powders from tin slag of printed circuit boards waste
Preparation and characterization of a novel composite microporous polymer electrolyte for Li-ion batteries
Preparation of glibenclamide nanocrystals by a simple laboratory scale ultra cryo-milling
Preparation, characterisation and testing of CuO/Ce0.8Zr0.2O2 catalysts for NO oxidation to NO2 and mild temperature diesel soot combustion
Preparation and Antibacterial Activity of Three-component NiFe2O4@PANI@Ag Nanocomposite
Preparation of a novel thermoplastic starch (TPS) material using ethylenebisformamide as the plasticizer
Preparation of the thermoplastic starch/montmorillonite nanocomposites by melt-intercalation
Preparation of porous alumina-titania abrasive and its chemical mechanical polishing behaviour on hard disk substrate