Home
|
Learning Center
|
中文版
Publications
站内成果搜索:
搜索
Study on the role of Ca in the grain refinement of Mg-Ca binary alloys
Study on the Structure and Performance of Steam-Ejector
Study on broadband cascaded third harmonic generation in short-range ordered dual-periodic nonlinear photonic crystal
study on the fabrication of superhydrophobic iron surfaces by chemical etching and galvanic replacement methods and their anti-icing properties
Study of structure parameters effect on performance of optical en/decoder based on parallel-cascaded microring resonators
Study on stress distribution of a subsea Ram BOP body based on simulation and experiment
Study on the effect of laser-induced plasma plume on penetration in fiber laser welding under subatmospheric pressure
Study of Solidification and Heat Transfer Behavior of Mold Flux Through Mold Flux Heat Transfer Simulator Technique: Part II. Effect of Mold Oscillation on Heat Transfer Behaviors
Study of Solidification and Heat Transfer Behavior of Mold Flux Through Mold Flux Heat Transfer Simulator Technique: Part I. Development of the Technique
Study on aerodynamic characteristics of quad-bundled crescent-shape iced-conductors
Study on Removing SO2 and NOx Simultaneously in Ships Emissions by Wet Scrubbing Based on Natrium-Alkali Method
Study on Band Gaps of the Photonic Crystal in THz Frequency Range Based on the Periodic WCS-PSTD Method
Study of positive and negative gradient refractive index alternant surface
Studies on the mechanism of refractive index gradient surface
Studies on liquid-liquid interfacial tension with standard dissipative particle dynamics method
Study on the trapdoor model experiment of tunnel excavation in weak surrounding rock mass
Studies on NBR-ZDMA-OMMT nanocomposites prepared by reactive mixing intercalation method
Study on a new polymer/graphene oxide/clay double network hydrogel with improved response rate and mechanical properties
Study on the sensorless control strategy of doubly fed induction generator
Study on deposition rate and laser energy efficiency of Laser-Induction Hybrid Cladding
Studies on the asymmetric synthesis of pandamarilactonines: an unexpected syn-selective vinylogous Mannich reaction of N-tert-butanesulfinimines
Study of molecule variations in human xanthelasma skin based on confocal micro-raman spectroscopy
Study on hydration of montmorillonite in aqueous solutions
Study on microwave pyrolysis of low rank coal under CO2atmosphere
Study of earth pressure against rigid retaining wall with arbitrary displacement modes
Study on combined optimal operation of cascade hydropower stations based on accelerating genetic algorithm
Study on anisotropic damage of concrete material based on implicit gradient model
Study on upgrading bio-oil by ethanol catalytic esterification with solid super base
Study on mechanical properties of cost-effective polyvinyl alcohol engineered cementitious composites (PVA-ECC)
Study on self-heating metallic powder for the selective laser sintering process
Studies on Capture of Modified Ca-Based Sorbents for Zn, Pb, As in Coal During the Process of Combustion Based on the Analysis of Fundamental Characteristics of Trace Elements and Coal Samples
Study on smoke temperature distribution based on model test in highway tunnel by shaft blow and exhaust ventilation
Study of bearing capacity of joined rock mass foundation based on generalized Hoek-Brown nonlinear failure criterion
Study of Determination of Oil Mixture Components Content Based on Quasi-Monte Carlo Method
Study of physical simulation experiment of penetration fuze layer-count burst point control
Study on temperature dependence of resistivity in liquid In-Sn alloy
Study on decoloration of acidic scarlet GR by pyrolusite oxidation under an acid condition
Study of biomechanical, anatomical, and physiological properties of scorpion stingers for developing biomimetic materials
Study on the novel neutron-to-proton convertor for improving the detection efficiency of a triple GEM based fast neutron detector
Study on the Interface and Performance of Ti-Al Laminated Composite Electrode Materials
Studies of the microbial metabolism of flavonoids extracted from the leaves of Diospyros kaki by intestinal bacteria
Study on composition effects of syngas and medium on ethanol production with Clostridium autoethanogenum
Study of ultrafine Ni80Cr20 alloy wire corrosion-head and through-die technology in cold drawing
Study on distributed motion of self-reconfigurable robot based on local rules
Study on failure mechanism of cushion in rigid pile composite foundation
Study on gust factor in typhoon winds considering influence of non-gaussian features
Study of Cu and Nd co-doped TiO2 photocatalytic property of degradating unsymmetrical dimethylhydrazine
Study on description of dynamic model system for self-reconfigurable M-cubes
Study on a Nonlinear Antiferroelectric Capacitor
Study of conserved quantities and characteristics of nonlinear Helmholtz solitons
Studying color connection effects of e(+)e(-) -> c(c)over-barc(c)over-bar -> Xi(cc) + X process within quark combination model
Study on heat transfer and flow instability of supercritical water in vertical tube
Study on interactions between suspended matter and biofouling formed by treated sewage
Study of the online operation of the optimal PWM modulation
Study on the Formation of Au Nanoparticles on Fresh and Oxided Porous Silicon Microcavity Substrate
Study on hybrid heat-gas-power flow algorithm for integrated community energy system
Study on volume data boundary uncertainty visualization based on scale space
Study of a novel tunable optical attenuator
Study on the combustion process and work capacity of a micro free-piston engine
Study of effect of chemical treatment on strength of bio-cemented sand
Study on flame responses and ignition characteristics of CH4/O-2/CO2 mixture in a micro flow reactor with a controlled temperature profile
Study on ice numerical simulation and its power loss characteristics for the blades of wind turbine
Study on reactivation cycle of biological activated carbon (BAC) in water treatment
Studies on the effect of shape-stabilized PCM filled aluminum honeycomb composite material on thermal control
Study of fiber laser micro-nano sensor based on colloidal crystal
Study on radical electromagnetic excitation forces of induction motor under mixed eccentricity
Study on Load Characteristics of Underwater Explosion Using RKDG-LS-DGF and BEM
Study on the thermal performance of transpi red solar air collector with baffles
Study of seismic performance of cable-stayed-suspension hybrid bridges
Study of SiC layer with fine grains in HTGR coated fuel particles
Studies on the evolution of annealing twins during recrystallization and grain growth in highly rolled pure nickel
Study of the mechanical performance of Grade 1860 steel wires at elevated temperatures
Study of hidden attractors, multiple limit cycles from Hopf bifurcation and boundedness of motion in the generalized hyperchaotic Rabinovich system
Study of the instability of the Poiseuille flow using a thermodynamic formalism
Study of bearing capacity of weightless foundation under local shear failure mode
Study on polarization dependent gain of fiber raman amplifiers with backward multiple pumps
Study on mechanical properties of bridge piles foundation in the pit slope of a ship lock
Study on Crosstalk Between Space Transient Interference Microstrip Lines Using Finite Difference Time Domain Method
Study of high and low temperature performance of fiber-asphalt mortar
Study on the Influence Mechanism of Trace H2O on SF6 Thermal Decomposition Characteristic Components
Study on mouse model of triple-negative breast cancer: association between higher parity and triple-negative breast cancer
Study on Molecular Recognition between Euphorbia Factor L713283 and beta-Tubulin via Molecular Simulation Methods
Study on localizability judgment in underwater sensor networks based on skeleton extraction and rigidity theory
Study and implementation of processing method for time-varying signal of Coriolis mass flowmeter
Study of slope stability under blasting vibration based on distribution of normal stress over slip surface
Study on sliding mode control of variable speed constant frequency wind-power system with doubly-fed induction generator
Study on the scheme of underground waste-filling technology in Kongzhuang Coal Mine
Study on the validity of 3 x 3 Mueller matrix decomposition
Study on cyclic loading tests of CFST frames with light-weight wall panels
Study of starting method for single-phase induction motor with three parallel-connected windings