Home
|
Learning Center
|
中文版
Publications
站内成果搜索:
搜索
Study on the reversible variation range of the resistance with tensile strain in amorphous Ni72Si15B13 alloy
Studies on the potassium-nickel hexacyanoferrate/ethanolamine/silica ion exchanger for Co-60 removal from spent fuel storage basins and the primary water circuit of nuclear reactors
Studies on Bioflocculant Production by Bacillus sp AEMREG7
Study of the S427G polymorphism and of MYBL2 variants in patients with acute myeloid leukemia
Study on wave energy resource assessing method based on altimeter data-A case study in Northwest Pacific
Studies on separation and properties of lumbrokinase in Pheretima praepinguis
Study of low-noise face gear drives associated with micro-punch webs
Study on the removal of heavy metal ions from industry waste by carbon nanotubes: Effect of the surface modification: a review
Study on Thermodynamics and Kinetics of Association Interactions between Malachite Green and OP-10 in Aqueous Solutions
Study on the generalized (p, q)-Laplacian elliptic systems, parabolic systems and integro-differential systems
Studies on the interaction of gliclazide with bovine serum albumin by fluorescence and synchronous fluorescence spectroscopy
Study on Square Super-Lattice Pattern with Surface Discharge in Dielectric Barrier Discharge by Optical Emission Spectra
Study on inorganic modified ammonium polyphosphate with precipitation method and its effect in flame retardant polypropylene
Study on Oil Pressure Characteristics and Trajectory Tracking Control in Shift Process of Wet-Clutch for Electric Vehicles
Study on crown profile models for Chinese fir (Cunninghamia lanceolata) in Fujian Province and its visualization simulation
Study on simplified evaluation method for annual operation performance of multi-connected air conditioning system
Studying Weyl prescription by virtue of D- and B-ordering technique of operators
Studies of the Local Distortions and the EPR Parameters for Cu2+ in xLi(2)O-(30-x)Na2O-69.5B(2)O Glasses
Studies of the local distortions for nd(1) (Mo5+ and W5+) impurities in KTP crystals
Studying the phase transition, thermal expansion, and heat capacity of technetium mononitride by first-principles calculations
Study on the determination method of the normal value of relative internal efficiency of the last stage group of steam turbine
Study on the sorption process of triclosan on cationic microfibrillated cellulose and its antibacterial activity
Studies on the Application of R-SFCL in the VSC-Based DC Distribution System
Study on pump optimizing for Bi/Er co-doped optical fiber
Study on the earth gravity modeling by GOCE in individual accelerometer mode
Study of the effect of mineral matters on the thermal decomposition of Jimsar oil shale using TG-MS
Study of nitrogen doping of graphene via in-situ transport measurements
Study of the fields scattered by a periodic strip structure of thin magnetic films
Study on Wind Characteristics of Runyang Suspension Bridge Based on Long-Term Monitored Data
Study on the pharmacokinetic profiles of corynoline and its potential interaction in traditional Chinese medicine formula Shuanghua Baihe tablets in rats by LC-MS/MS
Study on electrochemical property of La0.75Mg0.25Ni2.85Co0.45-x(AlSn)(x) (x=0.0, 0.1, 0.2, 0.3) alloys
Studies on photo- and thermal stability of PVA-encapsulated Mn-doped ZnS nanoparticles
Studies on Dye Decolorization by Ultrasound Assisted Electrocoagulation
Study on the toxicokinetics of Ni(II) on Artemia franciscana
Studies on novel tri-phthalonitrile phenyl polyhedral oligomeric silsesquioxane and the phthalonitrile-epoxy blends
Studies on Nonlinear Behavior of Shear Walls of Medium Aspect Ratio under Monotonic and Cyclic Loading
Study on 4-axial precision milling of spatial freeform surface for individualized hip prosthesis stem
Studies on the Air Curing and Oxygen Control of Polyaluminocarbosilane Fibers with Different Al Contents
Study of paracetamol-containing pastilles produced by melt technology
Study of the effects of translation and roughness on tornado-like vortices by large-eddy simulationsl
Students%26apos; goal orientations, perceptions of early clinical experiences and learning outcomes
Study on the Identification of Geographical Indication Wuchang Rice Based on the Content of Inorganic Elements
Study on the Plugging Ability of Polymer Gel Particle for the Profile Control in Reservoir
Study of a Double Cross-Linked HPAM Gel for in-Depth Profile Control
Study on relative permeability characteristics affected by displacement pressure gradient: Experimental study and numerical simulation
Study on reducing edge effects by using assistant force in laser forming
Study of reactivity control method by the application of gadolinium hydride to accelerator-driven system
Study on topological properties in two-dimensional grain networks via large-scale Monte Carlo simulation
Study of Graphene as a Negative Additive for Valve-Regulated Lead-Acid Batteries Working under High-Rate Partial-State-Of-Charge Conditions
Study on the flow and heat transfer of liquid metal based nanofluid with different nanoparticle radiuses using two-phase lattice Boltzmann method
Study on the relation between Doppler reactivity coefficient and resonance integrals of Thorium and Uranium in PWR fuels
Study on design of progressive dies for manufacture of automobile structural member using DP980 advanced high strength steel
Study of bovine hydroxyapatite obtained by calcination at low heating rates and cooled in furnace air
Study on the rare decays of Y(4630) induced by final state interactions
Study of the type material of two Platessa Lange-Bertalot species (formerly Cocconeis brevicostata Hust. and Cocconeis cataractarum Hust. (Bacillariophyta)
Study of Mechanics of Physically Transient Electronics: A Step Toward Controlled Transiency
Studies comparing ambulatory blood pressure and home blood pressure on cardiovascular disease and mortality outcomes: a systematic review
Study of decision framework of offshore wind power station site selection based on ELECTRE-III under intuitionistic fuzzy environment: A case of China
Study on Time Expectancy of Care for Daily Living of Chinese Elderly
Study of the Physicochemical and Excess Properties of Binary Systems Composed of Ionic Liquids ([C(n)mim]Cl, n=6, 8) and Three Dipolar Aprotic Solvents at T=288.15-333.15K
Study for the Effect of Continuously Applied Load on a Compressed Ag Nanoparticle at Room Temperature by Atomic Scale Simulations
Study of IRF6 and 8q24 region in non-syndromic oral clefts in the Brazilian population
Studying the evolutionary ecology of cognition in the wild: a review of practical and conceptual challenges
Study on the Emission Spectrum of Hydrogen Production with Microwave Discharge Plasma in Ethanol Solution
Study of crystallization behavior of neat poly(vinylidene fluoride) and transcrystallization in carbon fiber/poly(vinylidene fluoride) composite under a temperature gradient
Study on MnOx-FeOy composite oxide catalysts prepared by supercritical antisolvent process for low-temperature selective catalytic reduction of NOx
Study of the mechanical behavior of the hydride blister/rim structure in Zircaloy-4 using in-situ synchrotron X-ray diffraction
Studies on Acinetobacter baumannii involving multiple mechanisms of carbapenem resistance
Study of surface recombination on cleaved and passivated edges of Si detectors
Studying propofol-induced cardioprotection: from mechanism to clinical phenomenon and back again
Study of Milling Time and Process Control Agent on W-Mo-Cr Pre-Alloying Powders
Study on heat transfer process during leaks of high pressure argon through a realistic crack
Studies on the Characteristics and Behaviors of the Ion Association Structures of SO42- in Na+, Mg2+//SO42-, Cl-, H2O System by Raman Spectroscopy
Study on neutral chemical deinking of laser printed papers
Study of Impingement Types and Printing Quality during Laser Printing of Viscoelastic Alginate Solutions
Study of Supplementary Analgesics Capable of Reducing the Dosage of Morphine
Studying polyglutamine aggregation in Caenorhabditis elegans using an analytical ultracentrifuge equipped with fluorescence detection
Study of wind load on four astronomical enclosures based on numerical wind tunnel experiments
Study of chemically inequivalent N(CH3)(4) ions in [N(CH3)(4)](2)ZnBr4 near the phase transition temperature using H-1 MAS NMR, C-13 CP/MAS NMR, and N-14 NMR
Study of the initial stages of defect generation in ion-irradiated MgO at elevated temperatures using high-resolution X-ray diffraction
Study of downstream light intensity modulation induced by mitigated damage pits of fused silica using numerical simulation and experimental measurements
Study on the preparation and properties of high-porosity foamed concretes based on ordinary Portland cement
Study of Al2O3-Er2O3 composite coatings as hydrogen isotopes permeation barriers
Study on the morphological, dynamic mechanical and thermal properties of PLA carbon nanofibre composites
Studies on anticorrosion properties of polyaniline-TiO2 blended with acrylic-silicone coating using electrochemical impedance spectroscopy
Study of pi-conjugation effect of organic semiconductors on their optical parameters
Study of sparger location on solid suspension in a triple-impeller stirred vessel
Studying human respiratory disease in animals - role of induced and naturally occurring models
Study on Pt-structured anodic alumina catalysts for catalytic combustion of toluene: Effects of competitive adsorbents and competitive impregnation methods
Study on Absorption and Regeneration Performance of Novel Hybrid Solutions for CO2 Capture