Home
|
Learning Center
|
中文版
Publications
站内成果搜索:
搜索
Study of graph decompositions and placement of parity and data to tolerate two failures in disk arrays: Conditions and existence
Study on the lubrication state of frictional pairs with different surface roughness based on Stribeck curves
Study on the composition and structure of cyclic sulfoxide derivative palladium(II) complex
Study on the cuticle of sugarcane by means of SEM-EDAX
Study on the kinetics for enzymatic degradation of a natural polysaccharide, Konjac glucomannan
Study on the slot number inside the minimum symmetry group with only p1being triple in AC machine winding theory
Study on GIF biomimetic bleaching of softwood kraft pulp
Study on virtual instrument for analyzing electrical signal of welding process
Study of analyzing state of software under system testing in fuzzy logic
Study on the pressure in plasma arc
Study on crystallizing behavior of PBT/Hytrel blends
Study on the experiment and the precise discrete model of bifurcation and chaos for BUCK DC/DC converter
Study on the model of the fatigue-loaded vehicles in Guangzhou trestle bridges
Study on the phase transformation behavior of nanosized amorphous TiO%26lt;inf%26gt;2%26lt;/inf%26gt;
Study on the superacid catalyst SO42-/ZrO2-SiO2(II)*: Characterization of structure
Study on the kinetics of nisin fermentation
Study on high performance NBR/Zn(MAA)2alloy
Study on the slot number of the minimum symmetry group in AC machine winding pole-changing theory
Studies of the coordination reaction between aza-bridged bis-phenanthroline macrocycle and metal ion
Study on chaos and stability in permanent-magnet synchronous motors
Study of AIX TCP/IP
Study on emulsion polymerization of vinyl compounds
Study on the treatment of chlorine bleaching effluent with inner loop three phase fluidized bed bioreactor
Study on the influence of wet-end chemistry factors on rosin emulsion sizing
Study on the thermodynamic model for waste incineration
Study on liquid axial dispersion in packed tower
Study of the oxidative modification of calcium lignosulfonate
Study on morphologies and structures of diamond films synthesized on cemented carbide substrates
Study on the freeze drying of materials in vials: process simulation and experimental verification
Studies on structures and properties of in-situ compatibilization of HDPE/PET blends
Study in synthesis of high quality polypyrrole conductive films with stainless steel electrodes
Study of subgrain Al layer of SiC/Al interface in SiCp/Al-Si composites
Study on isozymes of silver carp
Study on longitudinal vortex generators'heat transfer enhancement in horizontal rectangular channel
Study of infrared spectrograms of dodecyl polyglycosides
Study on 6.1 channel general planar surround sound system
Study on chaotic behavior of smoke's plume in fire
Study on heat transfer and low resistance performance of petal-shaped finned tube oil-cooler with helical baffles
Study on the morphology and action of the interface between Ni base self-fluxing alloy coating and steel substrate
Study of the electrocatalyst for air diffusion in zinc air battery
Study on the reaction mechanism and kinetics of two-step synthesis of alkylpolyglycosides
Study of water/diglycol and water/glycol high temperature absorption heat pumps
Study on mechanical properties of warm compacted iron-base materials
Study on miscibility of PVC/MBS blend
Study on measurement of air velocity field of horizontal rectangular fins in channels
Study on raising prediction precision of viscosity of mixing rubber
Study on the rate of sucrose decomposition in impure sugar solutions
Study on the mechanism of the automobile emissions hot-reaction purification
Study of plano-convex silicon nitride microlenses with spherical surface
Study of new separation method of cyclohexanone from water
Study on the optimization of parameters in rubber mixing technology by statistical optimization
Study on the dynamic behavior of the Hong Kong Ting Kau bridge
Study of FRP rebar used for reinforcement of concrete structure of highway
Study on surface modifiers of polypropylene
Study in reduction of vibration and noise on window air conditioner
Study on characteristics of exhaust temperature and purification of thermal reactor for gasoline vehicle
Study of the method to separate butanone-water
Study on toughening of UP with liquid rubbers
Study and design on current control loop of vector control of PWM inverter-fed synchronous motor
Study on the wear resistance of cryogenic treatment 45 steel
Study on conductivity of poly(acrylic acid)-polyethylene golycol-salt complex membrane
Study on preirradiation grafting of 4-vinyl pyridine onto PP nonwoven cloth
Study on the mechanism of mixed hard wood alkaline peroxide mechanical pulping
Study on the In incorporation efficiency in LP-MOCVD growth of InGaAlP
Study on the method for improving application characteristics of piezoelectric transducer
Study of open-type robot control system based on network
Study on the influence of coating thickness, mould structure type and rotational speed on outside surface quality of centrifugal casting ductile iron pipes by heated mould method
Study on the characteristics of series macromolecule surfactants LMS-3 and LMA-1 used for emulsion liquid membrane
Study on a new teaching system for spherical SCARA robot
Study on the mechanism of alcohol carbonylation on Ni-Sn/C catalyst
Study on the immobilization of α-amylase on polystyrene anion-exchange resin by the absorbing and crosslinking method
Study on the interfacial morphology and structure of diamond thin film-cemented carbide substrate
Study on the hydrodynamics and mass transfer characteristics of 16 mm improved plastical saddle packings
Study on the holding-value of security assets
Study on the synthesis of alkyl polyglycosides
Study on the SOD-producing properties of strain ND - 60
Studies on phase transition of ferroelectric ceramics of PZT (Mn,W) and PZT (Mg,M) systems by thermophysical method
Study on adsorption of organic substances in tap water through an Ag-loaded activated carbon bed
Study on the factors affecting the water resistance when TPF resin is used for the reinforced processing of WHFB
Study on mechanism of MPBM in EPDM peroxide curing system
Study on the ratio between the investment rate and the economic growth rate and its control
Study on the room temperature curing of soap-free water-solubilized polyacrylic coating (2). The rheological property of crosslinking system of water-solubilized acrylics/HDI oligomer
Study on the main circuits of arc welding inverter
Study on stress concentrations in an intraply hybrid composite sheet
Study on the adsorption characteristics of SrC12-NH3chemisorption refrigeration working pair
Study on hydrodynamic lubrication failure of thrust bearings
Study on optical fiber gas-sensing mechanism
Study on the adaptability of thick film diamond tool to cutting composites
Studies on synthesis and adsorption properties of chitosan cross-linked by glutaraldehyde and Cu(II) as template under microwave irradiation
Study on corrosion-inhibition performances of calcium lignosulphonate of different relative molecular weights