Home
|
Learning Center
|
中文版
Publications
站内成果搜索:
搜索
Study on oxidation kinetics of carbon nanotubes by temperature programmed oxidation
Study on paraffin/expanded graphite composite phase change thermal energy storage material
Study on stability of Guangdong AC/DC hybrid power grid
Study of transverse cracking in cross-ply laminates
Study on measurement of thickness and refractive index of rough surface films by using ellipsometry
Study on the method to adjust the manipulating position of a fiber optic proximity sensor
Study on cooling of building roof by passive water evaporation
Study of quiver elimination and restraint for the decoupling-variable structure control system in induction motor
Studies of melt flow properties during capillary extrusion of polycarbonate
Study on dual wavelength density detection with liquid core wave-guide
Study on flow properties of PP/LDPE blends
Study on the problem of property rights distinction
Study on the loss of cohesion of membranous circuits
Studies on the reaction and properties of esterified and cross-linked starches - The gelatinization temperature of starch granules
Study on capacity model for reliability evaluation of HVDC system
Study on diameter controlled growth of carbon nanotubes by LaAl%26lt;sub%26gt;1-x%26lt;/sub%26gt;Fe%26lt;sub%26gt;x%26lt;/sub%26gt;O%26lt;sub%26gt;3%26lt;/sub%26gt;catalysts
Study of water-soluble polymers used in the grouting material for shield tunnel
Study on bolted connection of built-up I-shaped section columns consisting of double thin-walled cold-formed lipped channels
Study on the environmentally friendly DQP bleaching of non wood pulps
Study on gasification characteristics of electronic waste plastic in molten salts
Study on granule morphology of ground granulated blast furnace slag
Study on synthesis and properties of hydroxylethyl methacrylate grafted chlorinated polypropylene
Study on local cracking of segments in shield tunnel during construction
Study on hydrolytic-acidification (HA) during the treatment of wastewater in recycled fibers base mills
Study on paraffin/expanded graphite composite phase change thermal energy storage material
Study on peritectic solidification of Zn-2 wt%Ni alloy
Study of core-shell structure acrylate emulsion prepared by gradual emulsion polymerization: Synthesis technology
Study on topological properties of boundary of power flow feasibility region and algorithm for boundary computation
Study on instantaneous optimal supervisory control strategy for a series-parallel HEV
Study of a traffic splitting scheduling algorithm in multi-solution space for non-synergic nodes
Study on characteristics of bio-membrane in bio-contact oxidation treatment of wastewater from regenerated papermaking
Study on flame retardant PP containing loose nano-magnesium hydroxide
Study on impaction of underground space development on groundwater environment in Guangzhou City
Study on energy ratio model for phase morphology of immiscible polymer blends
Study on flame-retardant mechanism of polycarbonate containing sulfonate-silsesquioxane-fluoro retardants by TGA and FTIR
Study on the ductility design of high-rise reinforced-block-masonry shear walls
Study on treatment of high-cut carbonaceous shale slope in expressway
Study on concentration process of fresh tea juice based on freeze concentration
Study on formation of boundary lubricating film in a ball-on-disk system
Study of structure of spoke shape perforated plate for catalyst extruding machine
Studies of graded core-shell emulsion
Study on quantificational evaluation and correlation of gradational segregation in asphalt mixture
Study on polypropylene/modified bentonite nano-composite material
Study on separation and identification of flavonoids in plum by microemulsion thin-layer chromatography
Study on high-speed network intrusion detection based on network processor
Study of pores produced in underwater wet welding
Study on the texture of a friction stir welded Mg-Al-Ca alloy
Study on effect of segments erection tolerance and wedge-shaped segment on segment ring in shield tunnel
Study on control method for semi-active suspension vehicle via magnetorheological damper based on preview
Study of the transmission model of materials in rotary kilns based on a multi-layer BP neural network
Study on structure and magnetic entropy changes of Ce2-xPrxFe16.5Co0.5 alloys
Study on the performance of diglycidyl ether of bisphenol-A/hyperbranched aromatic polyester epoxy resin (HTME) system and their toughness mechanism
Study on micro-detonation chord cutting of aviation polymethyl methacrylate
Study on the state of water in soy protein gel by DSC
Study on the breeding of alkaline amylase producing strain by ultraviolet and He-Ne laser compound mutation
Study on effect of metro tunneling on carrying capacity of pile foundation
Study on flow properties of HDPE/mica composites
Study on determination of impurities in tungsten concentrates with ICP-MS
Study on novel counter electrodes for dye-sensitized crystalline solar cells
Study on determination of unloading time using method of settlement after construction
Study on the global property of the smooth Chua's system
Study of ampacity of single-core cable based on iterative method
Study on the degradation of polymer light-emitting diodes by in-situ micro-Raman spectroscopy
Study on synthesis and application of La0.7Sr0.3MnO3 catalyst
Study on similarity and similarity reasoning
Study on optimization of agent initial positions in land combat simulation
Study on LiMn2-xCoxO4 electrocatalyst prepared by low temperature combustion synthesis
Study of chlorination reaction mechanism of latex
Study on kinetics of asymmetric reduction of organosilyl ketone catalyzed by horse liver alcohol dehydrogenase
Study on tensile failure mechanism and hybrid effect of intraply hybrid composites
Study on stereo acoustic echo canceler with nonlinear pre-precessing units
Study on synthesis of nanometer TiO2 crystal from titanyl organic compound in liquid phase at normal pressure and low temperature
Study on the surface free energy of ground CaO by IGC
Study on hydrodynamic lubrication with second-order fluid (I) - Basic equations
Study on hydrodynamic lubrication with second-order fluid (II) - Numerical Analysis
Study on the asymmetric synthesis of (R) -cyanohydrins catalysed by (R) -oxynitrilase from almond in micro-aqueous phase
Studies on the dynamic viscoelasticity of curvielan, a novel gel-forming exopolysaccharide produced by Alcaligenes sp.
Study on transesterification of HDPE/PET/EVA blends by H-1-NMR
Studies on salting effects of DMC-AM-AA terpolymers in aqueous solution
Studies on the mechanism of reactions of substituted acetophenones with dibromocarbene
Study on control limits of secondary stress strength in pressure vessels
Study on morphologies and structures of diamond films synthesized on cemented carbide substrates
Studies on biodegradability and functionality of poly[(sodium acrylate)-co-(4-vinylpyridine)]
Study on extracting low concentration cadmium from zinc hydrometallurgy system by liquid membrane crystallizing technique
Study of pyridinium-type functional polymers. II. Antibacterial activity of soluble pyridinium-type polymers
Studies of separation of Sm3+ and Gd3+ by liquid membranes system containing TBP and N263 co-extraction mobile carrier
Study on the inclusion properties of charged beta-cyclodextrin as a host molecule by fluorimetry
Studies on the chemistry structure of soybean pentosan and its effect on the dough rheological properties
Study on annealing embrittlement of Fe-B-Si amorphous alloy
Study on silica supported Cu-Cr-Mo nitrobenzene hydrogenation catalysts