Home
|
Learning Center
|
中文版
Publications
站内成果搜索:
搜索
Study on optimization method of GDI engine combustion noise based on noise-performance map
Study on cold deformation and dynamic recrystallization behavior of Cu-Ni-Si alloy
Study on the electrotribological property of Cu-Ag-Cr alloy
Study on aluminizing and internal oxidation of Cu-Al-Y alloy
Study on aluminizing and internal oxidation treatment of Cu-Al-Y alloy with RE
Study on aging kinetics of Cu-2.0Ni-0.5Si alloy
Study on microstructure and thermodynamics of mussel shell
Study on aluminizing and internal oxidation treatment of Cu-Al-Y alloy
Study on kinetics of phase transformation of Cu-Cr-Zr-Y alloy though measurement of electric conductivity
Study of predicting properties for aged Cu-Ni-Si-Cr alloy based on artificial neural network
Study on dynamic mechanical properties of magnetorheological elastomers based on natural rubber/thermoplastic elastomer hybrid matrix
Studies and simulations on the flight trajectories of spinning table tennis ball via high-speed camera vision tracking system
Study of thermal stress for mass concrete considering concrete age and elastic-plasticity creep
Study of the converter based on photonic crystals filters and quantum dots for solar blind ultraviolet imaging system
Study on the effect of RDX content on the properties of nitramine propellant
Studies on pitting corrosion in austenitic stainless steel interfered by square-wave alternating voltage with different parameters using multi-potential steps method
Students-center模式下的英语教师专业成长
Study on the electronic structures and transport properties of the polyporphyrin nanoribbons with different edge configurations
Study of single-particle residence time in impulse, symmetric and asymmetric coaxial impinging streams
Study on small fatigue crack initiation and growth for friction stir welded joints
Study on Cardiotoxicity and Mechanism of "Fuzi" Extracts Based on Metabonomics.
Study on Installation Error Analysis and Calibration of Acoustic Transceiver Array Based on SINS/USBL Integrated System
Study on Sulfated Glycosylated Fe3O4 @ SiO2 Nanoparticles Inducing Tumor Cells Apoptosis
Study on Forced Torsional Vibration of CFRP Drive-Line System with Internal Damping
Study on co-liquefaction of Spirulina and Spartina alterniflora in ethanol-water co-solvent for bio-oil
Student Teachers' Emotions, Dilemmas, and Professional Identity Formation Amid the Teaching Practicums
Study on the balancing authority ACE limit standard of North American power grid
Study on cellulose microfilaments based composite spheres: Microwave-assisted synthesis, characterization, and application in pollutant removal
Study on Electrochemical Processes of NiO Model Electrode during the First Lithiation/delithiation Cycle via Electrochemical Impedance Spectroscopy
Study on Oxidation Activity of CuCeZrOxDoped with K for Diesel Engine Particles in NO/O2
Study on Nondestructive Measurement of Blood Perfusion Rate Based on Heat Conduction Model
Study on Residual Vibration Suppress of a 3-DOF Flexible Parallel Robot Mechanism
Study on Influencing Factors of Insulators Flashover Characteristics on the 110 kV True Tower Under the Lightning Impulse
Study on Mechanics-Based Cracking Resistance of Semiflexible Pavement Materials
Study on the electronic structure and optical properties of TiN films based on the first-principle
Study on the Fragmentation Behaviors of Deposited Particles on the Molten Slag Surface and Their Effects on Gasification for Different Coal Ranks and Petroleum Coke
Study on the Stability of CoxMn3-xO4 (M = Ni, Mn and Ce) Nanowire Array Electrodes for Electrochemical Oxygen Evolution at Large Current Densities
Study on Attenuating Angiogenesis and Epithelial-Mesenchymal Transition (EMT) of Non-Small Cell Lung Carcinoma (NSCLC) by Regulating MAGEC2
Study on hydrophobicity and wettability transition of Ni-Cu-SiC coating on Mg-Li alloy
Study of Influential Factors of the Vibration Modal of the Rocket Equipment Bay and Structural Improvement Based on Finite Element Analysis
Study of the self-imaging and its properties in the crystal of EU3+:Y2SiO5
Study of the microstructure modulation and phase formation of Ti-Al3Ti laminated composites
Study on the interfacial properties of the dual-activity silicone resin/carbon fibers composites
Study on Formation Process of Cell-Containing Guided Bone Regeneration Membrane
Study on the coupling relationship between water environment and social economy in Ganjiang River basin
Study of ratchet limit and cyclic response of welded pipe
Study on Carrier transportation in InGaN based green LEDs with V-pits structure in the active region
Studies on the Influence Factors of the Blood Glucose Photoacoustic Measurement Based on OPO Pulsed Laser Induction
Study of tectonic transformation along the eastern Altyn Tagh fault zone based on small earthquake relocation and focal mechanism solutions
Study on influence factors of the alpha-track measuring method for uranium prospecting
Study on Cogasification of Food Waste Char with Biomass/Coal Char and Their Interaction Mechanisms
Study on the molecular mechanism of antinociception induced by ghrelin in acute pain in mice
Studies of Terahertz Wave Propagation in Realistic Reentry Plasma Sheath
Study on the influential factors of SCS-CN model parameter S in the Loess Plateau area
Study on differentially expressed genes related to defoliation traits in two alfalfa varieties based on RNA-Seq
Study of performance of GPS space-time adaptive anti-jam system
Study of expression analysis of SIRT4 and the coordinate regulation of bovine adipocyte differentiation by SIRT4 and its transcription factors
Study on high-efficiency cutting of high-thickness workpiece with stranded wire electrode in high-speed wire electrical discharge machining
Study for Signal-to-Noise Ratio of Spatial Heterodyne Spectrometer
Study on Realization Method of Automatic Repair Wear Rail by Laser Cladding
Study on the development and usage of a cardiopulmonary resuscitation time point recorder
Study on Dielectric, Ferroelectric, and Magnetic Properties of 0.5 LaFe0.5Co0.5O3-Bi4Ti3O12 Multiferroic Thin Films
Study on the surface micro-topography in pre-stressed dry grinding process
Study on Cross-shaped Concrete Filled Steel Tubular Stub Columns Subjected to Axial Compression: Experiments and Design Method
Study on Drag Reduction Performance of Antifouling Ribbed Surfaces
Study of Fatigue Defect Critical Threshold of Remanufacturing Cores and Judgment of Re-manufacturability Based on Fatigue Defect
Study of Water Resources Carrying Capacity in Yuxi City
Study on the Credit Risk Contagion Mechanism of Enterprise Group’s Guarantee Behavior of Cellular Automation Simulation
Study on Carbonyl Emissions of Diesel Engine Fueled with Biodiesel
Study on the analysis of the mechanism of EDM based on Su-Field
Study on Nanoparticle Zeta Potential Based on Hilbert-Huang Transform
Study on public opinion propagation in self media age based on time delay differential model
Study of Starting Problem of Axisymmetric Divergent Dual Throat Nozzle
Study on Synthesis and Electrochemical Performance of Micro-Mesoporous Nano-Carbon Derived from Seaweed as Electrode Material for Supercapacitors
Study on the Characteristics of LFM Signals, BC Signals and Their Mixed Modulation Signals
Study on Influence of Ambient Temperature on Biaxial Stress and Strength of Flexible Inflatable Wing Film
Study on lift enhancement of a flapping rotary wing by a bore-hole design
Study on the stability mechanism of the sending-side three-machine-group system after multiple HVDC commutation failure
Study on Fourier-Transform Ghost Imaging with Partially Coherent X-Ray
Study on Preparation and Properties of PDA/CPP Bilayer on Skull Repairing Titanium Mesh
Studies of the Adsorption Properties of Methylene Blue onto Nickel Alginate Fibers
Studies on body condition scoring and influencing factors in captive forest musk deer
Study on the performance improvement of urban rail transit system
Study of probability integration method parameter inversion by the genetic algorithm
Study on drag reduction mechanism of rotating disk with micro-grooves
Study on risk assessment of overseas merger and acquisition knowledge integration based on character-weighted set pair
Study on the clamping force measurement and partial load regulation technology of injection molding machine
Study on the performance of ceramic composite projectile penetrating into ceramic composite target
Study a class of nonlinear fractional non-autonomous evolution equations with delay
Study on the construction and application of Cloudization Space Fault Tree