Home
|
Learning Center
|
中文版
Publications
站内成果搜索:
搜索
Analysis of diffusion-adsorption equivalency of landfill liner systems for organic contaminants
Analysis of Influential Factors of Konjac Glucomannan (KGM) Molecular Structure on Its Activity
Analysis on concentration and source rate of precursor vapors participating in particle formation and growth at Xinken in the Pearl River Delta of China
Analytic Model for Undoped Symmetric Double-Gate MOSFETs With Small Gate-Oxide-Thickness Asymmetry
Analytical solution of fundamental surface potential equations for symmetric double-gate metal-oxide-semiconductor field-effect transistors
Analysis and Control of Equivalent Physical Simulator for Nanosatellite Space Radiator
Analgesic effects of preoperative gabapentin after tongue reconstruction with the anterolateral thigh flap
Analysis of average capacity for free-space optical links with pointing errors over gamma-gamma turbulence channels
Analysis of spectra of neat and lanthanide ion-doped KPb2Cl5 excited by synchrotron radiation
Analysis and on application of dynamic characteristics of rough sets based on IDO connection degree
Analysis method on shoot precision of weapon in small-sample case
Analytical and experimental investigation of fatigue crack propagation for polyethylene methacrylate
Analysis of interfacial action of rectorite/thermoplastic polyurethane nanocomposites by inverse gas chromatography and molecular simulation
Analysis of period-doubling bifurcation in double-well stochastic Duffing system via Laguerre polynomial approximation
Analysis of damage during bending creep tests
Analysis on steady-state characteristics of widely tunable SG-DBR laser with residual facet reflectivity model
Analytic Model for Aircraft Survivability Assessment of a One-on-One Engagement
Analysis of structural simulation of fault formation in stratified rock mass
Analysis on thermal elastoplastic asperity contacts of layered media
Analysis of an Air-breathing Pulsed Detonation Engine with Bypass and Ejector
Analysis of linear defect modes in two-dimensional photonic lattices by employing Brillouin zone spectroscopy
Analysis of bifurcations for non-linear stochastic non-smooth vibro-impact system via top Lyapunov exponent
Analysis of stochastic bifurcation and chaos in stochastic Duffing-van der Pol system via Chebyshev polynomial approximation
Analysis of bifurcation and chaos in double-well Duffing system via Laguerre polynomial approximation
Analysis of unstable temperature field for thermal gradient CVI densification process of C/C composite
Analysis of thermal stress in the TiC/Ti3AlC/Ti3Al three-phase composites
Analysis of the relationship between iron resource efficiencies in steel production process and unit process
Analytical solution for spatially axisymmetric problem of thick-walled cylinder subjected to different linearly varying pressures along the axis and uniform pressures at two ends
Analysis of the interaction using FTIR within the components of OREC composite GPE based on the synthesized copolymer matrix of P(MMA-MAh)
Analysis of meso-scale damage and crack for CuW alloys induced by thermal shock
Analysis of IEEE 802.16 mesh mode scheduler performance
Analysis on fractional Oldroyd-B viscoelastic Poiseuille flow by numerical inversion of Laplace transforms
Analysis of an epidemic model with density-dependent birth rate, birth pulses
Analysis of surface generation in the ultraprecision polishing of freeform surfaces
Analysis of surface generation in ultra-precision machining with a fast tool servo
Analytic Approximation of the Solutions of Stochastic Differential Delay Equations with Poisson Jump and Markovian Switching
Analysis of interfacial behavior in titanium matrix composites by using the finite element method (SCS-6/Ti55)
Analysis on the nonlinear response of cracked rotor in hover flight
Analysis of wrinkling limit of rotary-draw bending process for thin-walled rectangular tube
Analytical modeling of asymmetric HALO-doped surrounding-gate MOSFET with gate overlapped lightly-doped drain
Analysis and discussion of mechanical properties and microstructure developments for Ti40 alloy thermal exposed at 550 degrees C
Analysis of a nonautonomous epidemic model with density dependent birth rate
Analysis of prognosis-associated factors in fulminant viral hepatitis during pregnancy in China
Analysis on the nonlinear response of cracked rotor in hover flight (vol 61, pg 183, 2010)
Analysis of model coupling in photonic crystal fiber with triangular structure triple-core
Analysis and optimal design of fixture clamping sequence
Analogue models of the effect of long-term basement fault movement on volcanic edifices
Analysis of dynamic properties of a spatial flexible beam with large overall motion and nonlinear deformation in non-inertial reference frame
Analysis and Implementation of MSC-Pool in Mobile Communication Core Networks with Path Diversity
Analysis and Statistics of Crystallisation Success Increase by Composition Modification of Protein and Precipitant Mixing Ratio
Analysis of Chinese women with primary ovarian insufficiency by high resolution array-comparative genomic hybridization
Analysis of water absorbency into knitted spacer structures
Analysis and imitation of dynamic properties for rigid-flexible coupling systems of a planar flexible beam
Analyzing the calcination of sulfur-rich calcareous oil shales using FT-IR spectroscopy and applying curve-fitting technique
Analysing anaphoric ambiguity in natural language requirements
Analysis of the interactions of multicomponents in Cornus officinalis Sieb. et Zucc. with human serum albumin using on-line dialysis coupled with HPLC
Analysis to driving forces of land use change in Lu'an mining area
Analytical threshold voltage model for cylindrical surrounding-gate MOSFET with electrically induced source/drain extensions
Analysis of chaotic behavior in the extended Duffing-Van der Pol system subject to additive non-symmetry biharmonical excitation
Analysis of Functional Genes in Carbohydrate Metabolic Pathway of Anaerobic Rumen Fungus Neocallimastix frontalis PMA02
Analysis of measuring existing stresses in concrete structure by hole drilling core surface strain gauge method
Analysis of residual stresses in thick aluminum friction stir welded butt joints
Analysis on linear friction welded joint of Ti-17 alloy
Analysis of Gaseous Species in Chemical Vapor Deposition of SiC from MTS/H-2
Analysis for the stabilization of impulsive control Liu's system
Analysis of the evolvement of hot-image in case of thick nonlinear medium
Analysis Method of Trace Compounds by Hollow-fiber Liquid-phase Microextraction with Electric Field Enhancement of Mass Transfer
Analytical Threshold Model for Nanoscale Cylindrical Surrounding-Gate Metal-Oxide-Semiconductor Field Effect Transistor with High-kappa Gate Dielectric and Tri-Material Gate Stack
Analytical and experimental investigation of fatigue and fracture behaviors for anti-double dog-bone riveted joints
Analyzing inner and outer synchronization between two coupled discrete-time networks with time delays
Analysis of a viral infection model with delayed immune response
Analysis and Research on the Cause of Tanker Contaminating Jet Fuel
Analysis on the Valence Electron Structure of {001}(GP)//{001}(alpha), Interface in Al-Cu Alloy
Analysis of the effect of alloy elements on martensitic transformation in titanium alloy with the use of valence electron structure parameters
Analysis of the Bacterial Heat Shock Response to Photodynamic Therapy-mediated Oxidative Stress
Analytical solution to salt-water movement in soil and the determination of the hydrodynamicdispersion coefficient
Analysis of the Relationship Between Submerged Aquatic Vegetation (SAV) and Water Trophic Status of Lakes Clustered in Northwestern Hillsborough County, Florida
Analysis of conveyor belts in winter Mediterranean cyclones
Analytical Approximation to the l-Wave Solutions of the Hulthen Potential in Tridiagonal Representation
Analysis of random transformation errors for linear electronic systems
Analysis of dynamic characteristics for a rotor system with pedestal looseness
Analog Layout Retargeting Using Geometric Programming
Analysis of the RNAi targeting FAD2 gene on oleic acid composition in transgenic plants of Brassica napus