Home
|
Learning Center
|
中文版
Publications
站内成果搜索:
搜索
Study on lithium separation from salt lake brines by nanofiltration (NF) and low pressure reverse osmosis (LPRO)
Study of Peptide Mimetics of Hepatitis A Virus Conjugated to Keyhole Limpet Hemocyanin and as Multiple Antigen Peptide System
Study on interactions of saccharides and their derivatives with potassium phosphate monobasic (1:1 electrolyte) in aqueous solutions at different temperatures
Study on CuCrAl and CuCrZr oxides as catalysts for low-temperature slurry phase methanol synthesis
Study on hydrophobic aggregation settlement of high muddied coal slurry water
Study on the reaction kinetics of forsterite synthesis
Study on temperature/stress distribution in porous plug for bottom-blowing ladle furnace
Study on real-time estimationand error compensation of contour error for space curve
Study on mineral oil identification based on a dimension reduction method of three dimensional fluorescence spectra
Study on endpoint detection technology based on fiber perimeter security system
Study on the manufacturing service trading platform based on processing behavior
Studies on the properties of natural fibers-reinforced thermoplastic starch composites
Study of the active distribution network planning considering multiple electric vehicle charging stations participating in V2G applications
Studies on Changes of Brain Energy Metabolism in Diabetic Rats by P-31 Magnetic Resonance Spectroscopy
Study on calibration method for the performance index of SPR sensors
Study on rapid detection method of sunlight specific waveband intensity
Study on fast terminal sliding mode control for a helicopter via quantum information technique and nonlinear fault observer
Study on control performance and energy recovery efficiency of hydraulic hybrid excavator
Study of magnetic properties of Ni-Fe-P and Ni-Fe-P-B chemical films
Study of cemented carbides toughness evaluation by low cycle impact loading
Study on the performance improvement of titanium alloy through deep cryogenic and thermal-cold cycling treatment
Studies on coupling dynamic response of TLP in stochastic waves
Study of Deformation Mechanisms in Titanium by Interrupted Rolling and Channel Die Compression Tests
Study on the precision co-extrusion technology for PET recycling
Study on double position molding technology of labyrinth type drip irrigation tape
Study on identification model of cylinder liner-piston ring using vibration analysis based on fuzzy C-means clustering
Study on spray characteristics of dimethyl ether
Study on recognition of marrow cell image based on morphology and neural networks
Study on sub-arc X-ray welding image defect segmentation algorithm and defect model
Study of underwater acoustic communication technology based-on the acoustic vector sensor
Study of the halo nucleus He-6 through the direct nuclear reactions
Study of Lime Dissolution Under Forced Convection
Study on the delay time identification and dynamic characteristics of soft sensor based on artificial neural network
Study on the hydrogen storage and electrochemical properties of Mm(0.75)Mg(0.25)Ni(3.5)Co(0.2)Al(x) (x=0.0-0.4) alloys
Studies on principle of room temperature resistivity of polyethylene/polyacenic semiconductor composites
Study of a kind of hyper chaotic cryptosystem security
Study on production line technology of high-efficient black multicrystalline silicon solar cells
Study on the Mechanism of Adhesion Improvement Using Dry-Ice Blasting for Plasma-Sprayed Al2O3 Coatings
Study on the Surface Temperature of Fabric in the Process of Dynamic Moisture Liberation
Study of Dynamical Chiral Symmetry Breaking in (2+1) Dimensional Abelian Higgs Model
Study of the effect of source signal bandwidth on ratiometric wavelength measurement
Study on the thermal decomposition kinetics of nano-sized calcium carbonate
Study of creep behavior of a calcarenite: San Julian's stone (Alicante)
Study of treatment results and early complications of tube drainage versus capitonnage after the unroofing and aspiration of hydatid cysts
Study on Nonlinear Response of Steel Fixed Offshore Platform Under Environmental Loads
Study of the Electrodeposition of Cu2O Thin Films from DMSO Solution
Study of initial stages of thin film growth by means of computer simulation and image analysis: Advanced atomistic modelling
Study of fiber length and fiber-matrix adhesion in carbon-fiber-reinforced polypropylenes
Study of electronic and magnetic properties of MnAg layers
Study of the chelating properties of Ge(OH)(2) functionality as metal binding group for Zn2+ cation in simplified protease-like environments: a DFT analysis
Study on analytical modelling approaches to the performance of thin film PV modules in sunny inland climates
Studies on the sorption capacity for Pb(II) and Hg(II) of citralidene chitosan
Studies on diversity of lichen, Pyxine cocoes to air pollution in Bhadravathi town, Karnataka, India
Study of the hydrothermal treatments of residues from fluidized bed combustors for the manufacture of ettringite-based building elements
Study on microstructure and crystal growing of the potassium hexatitanate whiskers reaction synthesized
Study on Mn-induced Jahn-Teller distortion in BiFeO3 thin films
Study of Cerebello-Thalamocortical Pathway by Transcranial Magnetic Stimulation in Parkinson%26apos;s Disease
Study of Bio-nano Interaction Outlook of Amino Acids on Single-walled Carbon Nanotubes
Study of Pressure and Curing Temperature in Reactive Powder Concretes (RPC) with different amounts of Metallic Microfibers
Study of dural sac cross-sectional area in early and late phases after lumbar decompression surgery
Study on multiple receiver systems in non-line-of-sight ultraviolet communication systems
Studying the physico-chemical properties of commercially available oil-well cement additives using calorimetry
Study of the atom-phonon coupling model for (SC) partition function: first order phase transition for an infinite linear chain
Study on dynamic and mechanical characteristics of carbon fiber- and polyamide fiber-reinforced seismic isolators
Study of optically pumped all-metal terahertz laser
Study of striation variations in shadow mask plasma display panel
Study on unascertained clustering for video affective recognition
Study on the microstructure and mechanical properties of vacuum brazing titanium alloy using Ti-Zr-Cu-Ni amorphous filler metal
Study of single-stage and non-spherical optical system of laser fuze
Study on image compression and fusion based on the wavelet transform technology
Study on the effects of mooring parameters on the stability of floating wind turbine
Study on the influence of piloti on mean radiant temperature in residential blocks by 3-D unsteady state heat balance radiation calculation
Study on mathematical modeling and experiment of ultrashort laser polishing micro-processing
Studies on the morphological, thermal and crystalline properties of starches separated from medicinal plants
Study on the surface dynamic wettability of rice hull powder polyethylene composite
Study on the Dynamics of Tribocharged Coal and Mineral Particles in Free-Fall Triboelectric Separator
Study on pricing optimization model of for-hire truck in the highway freight market
Study on wind-resistant dynamic reliability of TMD with limited spacing
Study on pre-yield shear stiffness of differential restoring force model for lead rubber bearing
Study on fast numerical compensation of hysteresis measurement of ferroelectric film
Study on the characteristics and mechanism of seismic damage for tunnel structures on fault rupture zone in Wenchuan seismic disastrous area
Study on Removing Methanthiol with Chlorine Dioxide
Study of a decision-making information system for determining an owner's optimal purchasing schemes in build-transfer projects
Study on the concentrated SF6 quantitative intelligent ultrasonic detection system
Study of 1,3-Dipolar Cycloaddition and Ring Contraction of New 1,4-Phenylene-bis[1,5]benzothiazepine Derivatives
Study of the application and mechanism of benzohydroxamic acid in the flotation of cassiterite
Study of failure mode of sandstone under reservoir water pressures
Study of the influence of alloying elements on Cu precipitation in steel by non-classical nucleation theory
Study on rotational behavior of bolted glulam beam-to-column connections with slotted-in steel plates
Studying users' computer security behavior: A health belief perspective