Home
|
Learning Center
|
中文版
Publications
站内成果搜索:
搜索
Studies on the electro-catalytic performance of Pt-carbon aerogel by microwave synthesis
Study on ant-colony based routing algorithm for WSN
Study on the nonlinear dynamic of ultrashort pulse propagation in noble gases
Study and application of Zero Wash Tracer fracture monitoring
Study on monitoring of glucose concentration with optical coherence tomography
Study on Zeeman-split spoof surface plasmon polaritons by use of spin-sensitive enhanced electromagnetic transmission
Study on washability of microcrystal graphite using float-sink tests
Study of density measurement of porous pyrocarbon layer coated on sphericity kernel by particle size analyzer metho
Study on the flow within the impeller of vortex forward-extended double blade sewage pump and prediction of its performance
Study on image denoise based on empirical mode decomposition and total variation model
Study on isolation and identification of a Klebsiella sp. B-36 and properties of lipase
Studies on mechanical property of high fluidity steel fiber reinforced ultra-high strength concrete
Study of translational motion compensation and instantaneous imaging of ISAR maneuvering target
Study on the defect detection technology based on wavelet analysis and image edge detection
Study on an innovative integrated two-phase anaerobic digestion technology for agricultural wastes
Study on health risk assessment of reuse of reclaimed water in Tianjin urban water system
Study on buttresses distance of gas pipelines in the deviated well based on stress analysis method
Study on Wind Characteristics of Typhoon Muifa on the Sutong Bridge
Study of impact of vacuum loading mode on dredger fill flow mud consolidation effect and soil particles moving
Study on seismic response control of frame structure using innovative re-centring SMA damper
Study of three new agitators
Studies on the fluidization properties of agitated fluidized bed
Study on Single-Walled Carbon Nanotube Thin Film Photoelectric Device
Study on the key parameters of the Johnson-Holmquist constitutive model for concrete
Study of particle swarm optimization algorithm based on convergence control
Study on the Traffic Air Pollution inside and outside a Road Tunnel in Shanghai, China
Study on formability of solid nanosuspensions during solidification: II novel roles of freezing stress and cryoprotectant property
Study on constant-step stress accelerated life tests in white organic light-emitting diodes
Study on vibration of the offshore large-scale wind turbine blade under fluid structure interaction at different wind speeds
Study on numerical well test method of gas reservoirs with large-scale fractures
Study on hydrolysis of distillers grains by mixed acid as catalyst
Study on the Change of Muscle Proteins During the Half-Dried Salt-Cured Silver Carp (Hypophthalmichthys molitrix) Processing
Study on underwater dual-laser structured-light system for ROV guiding
Study of grid locality and its optimization
Study on financing supply chain coordination based on strategic customer
Study on static CCT curve of 20MnCrNi2Mo wear-resistant cast steel with rare earth
Study on fatigue crack propagation in different zones of TA15 electron beam welded joint
Study of aluminium doped zinc oxide nanofilms deposited by rf magnetron sputtering
Study About the Effects of Different Fitness Sports on Cognitive Function and Emotion of the Aged
Study on bearing capacity characteristics of an axial permanent magnetic bearing
Study of face recognition technology based on STASM and its application in video retrieval
Study on the technology of U-Pu Co-stripping process for reprocessing spent fuel of fast reactor
Study on eliminating spurious eddies at the interfaces of two-phase flows using lattice boltzmann simulations
Study on the corona-resistance mechanism of the polyimide films
Studying on the node's influence and propagation path modes in microblogging
Study of PVDF porous membranes blending with organic-inorganic hybrid nanoparticles via surface zwitterionicalization
Study on fabrication parameter of graphene on copper by CVD
Studies of a Novel Cysteine Sulfoxide Lyase from Petiveria alliacea: The First Heteromeric Alliinase
Study on structures and properties of microcrystalline silicon films prepared by hot wire chemical vapor deposition
Study on the technical innovation capability evaluation of agricultural enterprises in Wuling Mountains
Study improves subsea pipeline preheating
Study of robot architecture in multiple mobile robots system
Study on the nucleation and growth of Laves phase in a 10% Cr martensite ferritic steel after long-term aging
Study of liquefaction characteristics of unsaturated silt
Study on fluid flow in swirling chamber of swirling flow tundish
Study on the acoustic backscattering characteristics of underwater corner reector
Study on the activation characteristics and hydriding/dehydriding kinetics properties of La0.67Mg0.33Ni3 alloy
Study on non-contact power transmission of underwater unmanned vehicle
Study on the properties of CdMnTe crystals grown by traveling heater method
Study on the resolution-frequency characteristic of microfluidic oil detection chip
Study of structural parametric influences on wave forces of deepwater bridge combined foundation of twin pile caps
Study on the steering characteristics of curve negotiation under locomotive traction
Study on laser Doppler technology in measurement of blast shock
Study on the magnetic properties and coercivity mechanism in the (Nd0.7Pr0.3)60-x Fe30Al10Dyx(x=0, 1, 2) bulk amorphous alloys
Study on the Preparation of H3PW12O40-TiO2/Bentonite Composite Material
Studies on fabricating alpha-Fe2O3 ultrafine particles by LB film technology
Studies on the property of ethylene-vinyl alcohol-vinyl acetate terpolymers
Study on aging characteristics of silicone rubber sheds ofcomposite insulators based on TSC test
Study on multifunctional experiment platform of scale model of subway tunnel and station
Study on economic disparities of inbound tourism in China based on the gravity center model
Study of properties of functional multi-walled carbon nanotubes/epoxy nanocomposites
Study on liquid structure of iron-rich Fe-Si alloy
Study on microstructure and crystallization of amorphous Cu56Zr44 alloy by means of isothermal annealing
Study of dynamic mechanical properties and morphological behaviours of fly ash reinforced polypropylene composites
Study on AADDS plunger pump driving bearing properties
Studies of TPR in situ Fe-57 MBS on the reduction behavior of the gamma-Al2O3 supported iron and platinum-iron catalysts
Study of DNA adsorption on mica surfaces using a surface force apparatus
Study on the QoE for VoIP networks
Study on micro-topographical removals of diamond grain and metal bond in dry electro-contact discharge dressing of coarse diamond grinding wheel
Study on optimization design of the cooling system of lithium-ion battery on electric vehicles
Study on agent-based intelligent feedback system in online teaching and interactive learning
Study of coherent optical wavelength division multiplexing terabit transmission experiment system based on multi-carrier
Study of 16 Tbit/s WDM transmission system derived from the CO-OFDM with PDM 16-QAM
Study on 8DPSK of multi-phase modulation technology based on CSRZ
Study on the control of the wing-body juncture horseshoe vortex utilizing Venturi tube
Study of the regenerator for solar hot air heating system
Study on kinetic model of tar catalytic reforming reaction over biomass char
Study on fiber coupling for 974 nm semiconductor laser diode
Study on preparation and properties of a-Si:H thin films for HIT solar cells
Study on MSCs transplantation in respiratory diseases