Home
|
Learning Center
|
中文版
Publications
站内成果搜索:
搜索
Study on the mineral elements of wheat straw by means of SEM-EDAX
Study of fast growth of polycrystalline silicon film from SiCl4/H2by PCVD at low-temperature
Study on the general compensation technique of power system
Study on the bifurcation phenomena of power system load flow solution
Study on the improvement of one-step alkyl glucoside synthesis and the impact of colloid and surface chemistry factors
Study on enhancement of flow boiling heat transfer inside internal thread tube
Study on the catalytic esterification properties of SO42--MoO3-ZrO2catalysts
Study on chemical constituents of acetone extractives from masson pine acid sulfite pulp
Study on the packing in high gradient magnetic separator
Studies on the process of uniform substitute of CMC
Study of decoupling-variable structure system with fuzzy control
Study on the electric charges of the aggregated road surface
Study on the room temperature curing of soap-free water-solubilized polyacrylic coating (3). Room-temperature curing process of the system of water-solubilized colloidal dispersion/HDI oligomer
Study on scanning and recognition technique of special purpose report form
Studies on preparation of PVA/PAN pervaporation composite membrane and its separation properties (I)
Study on soft systems methodology
Study on synthesis and properties of ACR resin with multi-layer core-shell construction III. the constructions and properties of ACR resin
Study on modified mordenite as amination reaction catalyst - the spreading of cerium modified mordenite
Study of the exhaust steam condenser heat transfer enhancement of a condensing steam turbine
Study of transverse cracking of composite laminates
Study on the adsorption of γ-immunoglobulin with affinity membranes
Study on antilock braking system of automobile
Study on bleachability of RDH pulp
Study on ability of fertilizer conservation of red-soil modified by polymers
Study on an iterative multi-user detector for a DS-CDMA system
Study on the preparation of SEPDM with high sulfonation level and the properties of SEPDM ionomers
Study on PS-SBR-g-S powder blends II. phase structure of the SBR-g-S powder and compatibility of PS/PR
Study on long term performance of the solar-powered solid adsorption refrigeration system. Part I: experimental study on thermal decomposition of methanol
Study on the ultrasound inactivation of soybean trypsin inhibitors
Study on exergoeconomic optimization of spray drying system
Study on simultaneous considering control performance and synthesis of heat exchanger networks with splitting
Study on the neural network control for seam tracking of arc-welding robot
Study on the cutting parameters in manufacturing of metal fibers
Study on charge/discharge basic performance of lithium ion rechargeable battery for electric vehicle applications
Study on mechanism of Li-ion intercalating into carbon of graphite anode
Studies on morphologies and structure of polybutadiene based polyurethane elastomer containing different hard-segment structure
Study on tissue culture and agavain-SH inducement of Agave sisalana
Study on the surface structure of polypyrrole/thiokol rubber in-situ composite films
Study on gas density sensing method based on fiber optic disturbed mode
Study on tung oil based alkyd resin modified by styrene
Study on strengthening combustion and NOx formation properties of rough-surfaced bluff-bodies
Study on the existing state of Al3+in the vermiculite interlayer
Study on an intelligent weld seam tracking system
Study on the interaction between sparfloxacin and serum albumins by fluorescence
Studies on synthesis of styrene modified alkyd resins
Study on three-phase Newtonian fluid in an internal loop airlift reactor with a convergence-divergence draft tube
Study of the affecting factors of supercritical fluid extraction of soybean phospholipid
Study of the dispersion, scale inhibition and corrosion inhibition of sodium lignosulfonate from masson pine
Study on bi-directional conductibility and power loss of power MOSFET in synchronous rectifiers
Study on the oxygen bleaching of Soda-AQ reed pulp
Studies on melt flow properties of low density and linear low density polyethylene blends in capillary extrusion
Study on liquid phase partial hydrogenation of benzene to cyclohexene over supported Ru catalysts
Studies on bleachability of RDH pulp
Study on the LMS biobleaching of eucalyptus kraft pulps
Study of the method for measuring liquid density by optical waveguide
Study on nitrogen distribution and nitrided mechanism for ultrathin nitride SiO2by rapid thermal nitridation
Study on common grinding characteristics of limestone and clinker
Study on the hydrolysis mechanism of ganoderma under ultrasonic field
Study on hydrodynamics and mass-transfer performance of conjugate ring of aluminizing carbon steels
Study on improving the tint of masson pine kraft pulp
Study on the extended delignification of plantation eucalyptus wood
Study on the current transport mechanisms in thin SiOxNyfilms
Studies on pulping and bleaching of aspen and eucalyptus
Study of the flow behaviour of rubber compound melt through extrusion dies with different entry angles
Study on singlet oxygen-reinforced oxygen bleaching of soda-AQ wheat straw pulp
Study on Si3N4film microlens by laser chemical vapor deposition
Study of the fabrication of microlenses by laser chemical vapor deposition
Study of the flow properties and crystallization behaviour of HDPE melt during extrusion
Study on modified kraft cooking of pinus taeda and low pollution bleaching of the pulp
Study on catalytic properties of methanol dehydrogenation to methyl formate
Study on PS-SBR-g-s powder blends I. relationship between phase structure, impact fracture mechanism and impact toughness
Study of ultrafiltration process for treatment of SCMP wastewater
Study on permanent-mold casting of brass faucet body
Study on the performance and reaction mechanism of modified calcium lignosulfonate
Study on the fundamental theory of exergy transfer
Study on the circuit simulation of chaotic attractors
Study on composition, microstructure and hardness of DLC films by vcad
Study of the fluoropolymer adhesive and its electrochemical character
Study of the cooperating detergency mechanism of the enzymes with surfactants
Studies on rheological properties of chitosan solution
Study on a novel high power soft-switched welding converter
Study on optimum conditions for two-stage oxygen delignification of masson pine kraft pulp
Study on extended delignification of plantation eucalyptus wood. Part I: The principles of extended delignification
Study on the seismic response control of single pile platform with seismic isolation structure by using the semi-active MR damper
Study on the improvement of systolic time intervals (STI) precision by wavelet analysis
Studies on the fibre-containing photo-crosslinking polyurethane as the carrier of immobilized cells
Study on the bio-treatment of effluent from E. eucalyptus SCMP
Study of trap characteristics of rapid thermal nitrided SiO2film
Study on morphology of St-BA-MAA composite polymer latex
Study on some fundamental theories of singular measure differential systems with impulse effect