Home
|
Learning Center
|
中文版
Publications
站内成果搜索:
搜索
Designing tunable band-gap and magnetization at room-temperature in Pb(Ti1-xMx)O3-delta(M= Ni and Pd) thin films
Design and construction of a four-point bending based set-up for measurement of piezoresistance in semiconductors
Designing H-infinity filters with circular pole and error variance constraints
Design Principle of Telluride-Based Nanowire Heterostructures for Potential Thermoelectric Applications
Design, simulation and performance of a waste heat driven adsorption ice maker for fishing boat
Design and implementation of novel thin film position-sensitive detectors (TFPSDs) based on photoconductive effect
Design and experiment of a testing device for Fe-Ga magnetic properties
Design and application of solid, dense backfill advanced mining technology with two pre-driving entries
Design of testable system for airborne optoelectronic imaging equipment
Designing and Experimental Verification of the Axial Hybrid Magnetic Bearing to Stabilization of a Magnetically Suspended Inertially Stabilized Platform
Designing gene regulatory networks with specified functions
Design of Wide-Stopband Bandpass Filter and Diplexer Using Uniform Impedance Resonators
Designing Epoxy Insulators in SF6-Filled DC-GIL with Simulations of Ionic Conduction and Surface Charging
Design of black phosphorus 2D nanomechanical resonators by exploiting the intrinsic mechanical anisotropy
Design of Graft Block Polymer Thermoplastics
Design and performance analysis of twisted rudder based on the maximum reduction of rudder resistance
Design of nano/micro-structured diamond coating on cemented carbide
Design, synthesis and activity of novel sorafenib analogues bearing chalcone unit
Design, synthesis and docking studies of novel thienopyrimidine derivatives bearing chromone moiety as mTOR/PI3K alpha, inhibitors
Design, synthesis, anticancer activity and docking studies of novel 4-morpholino-7,8-dihydro-5H-thiopyrano[4,3-d] pyrimidine derivatives as mTOR inhibitors
Design and simulation of a thermal driven miniature electric field sensor
Design and fabrication of a miniature electric field sensor based on microfabrication technology
Design and implementation of a mould level control system
Design and construction of entry retaining wall along a gob side under hard roof stratum
Design and experimental verification of a dust removal device for a magnetically stabilized fluidized bed
Design and Analysis of New Vernier Permanent-Magnet Machine With Improved Torque Capability
Design, synthesis and antifungal activity of novel paeonol derivatives linked with 1,2,3-triazole moiety by the click reaction
Design and construction of a multi-layer CsI(Tl) telescope for high-energy reaction studies
Design and analysis of a novel pumping-voltage multilevel inverter based on partial charging of DC capacitor
Design and fabrication of a MEMS-based gas sensor containing WO3 sensitive layer for detection of NO2
Design consideration of a high temperature superconductor Maglev vehicle system
Design of a Touch Controller for Multitouch Screen System With Touch Prediction and Window Sensing (TPWS) Strategy
Design of a new two-dimensional diluted magnetic semiconductor: Mn-doped GaN monolayer
Design of high-performance water-in-glass evacuated tube solar water heaters by a high-throughput screening based on machine learning: A combined modeling and experimental study
Design of two-axis attitude control system based on MEMS sensors
Designed Post-Self-Assembly Structural and Functional Modifications of a Truncated Tetrahedron
Design and high-speed characteristics of automotive hybrid chain system
Design and research of helicopter patrol inspection system for power transmission line based on intelligent diagnosis technology
Design of organosulfonic acid functionalized organosilica hollow nanospheres for efficient conversion of furfural alcohol to ethyl levulinate
Design of the downhole oil-water separation system for submersible electric pump wells and its ground monitoring model
Design of a slab laser beam shaping system with astigmatism
Design of on-chip clock generation with 50/50 duty cycle correction
Design and implementation of real-time remote sensing data lossless compressor
Design and FPGA implementation of full-digital feed-forward AGC
Design and Analysis of the Gemini Chain System in Dual Clutch Transmission of Automobile
Design and characterisation of an advanced duplex system based on carbon S-phase case and GiC coatings for 316LVM austenitic stainless steel
Design and experimental validation of a linear piezoelectric micromotor for dual-slider positioning
Design of LLC Resonant Converters Based on Operation-Mode Analysis for Level Two PHEV Battery Chargers
Design and optimization of beam-splitting polarizing filter based on two-dimensional photonics crystal
Design and Seismic Analysis of the Large Biological Shielding Door in Nuclear/Fusion Reactor
Design and application of an intelligent robotic gripper for accurate and tolerant electronic connector mating
Design criteria and geometric parameters formulae for the skew line gear mechanism
Design, Synthesis and Structure-Activity Relationships of Novel Diaryl Urea Derivatives as Potential EGFR Inhibitors
Design and implementation of leak acoustic signal correlator for water pipelines
Design and analysis of aerostatic spindle with high load characteristics for large ultra-precision drum lathe
Design and Performance Evaluation of a Tubular Linear Switched Reluctance Generator with Low Cost and High Thrust Density
Design and control of a 6-degree-of-freedom precision positioning system
Design of photoactive hybrid based intelligent photodetectors for identifying the detected wavelength
Design of a novel dual-arm inspection robot with flexible cable
Design of a novel A/B bi-rotary head based on differential drive
Design and optimization of 3-D MEMS inductors
Design of two-impulse Earth-Moon transfers using differential correction approach
Design, Synthesis and Biological Activity of Novel Aphid Alarm Pheromone Analogues Containing Isonicotinic Acid
Design and electromagnetic properties of conformal single-patch microstrip antennas integrated into three-dimensional orthogonal woven fabrics
Design, synthesis, docking studies and biological evaluation of novel dihydro-1,3,5-triazines as human DHFR inhibitors
Design and Synthesis of Antiblinking and Antibleaching Quantum Dots in Multiple Colors via Wave Function Confinement
Design of low energy bunch compressors with space charge effects
Design and FPGA implementation of time-frequency transforming for stretch processing
Design and Implementation of a Coal-Bed Methane Fracture Monitoring System based on Virtual Instrument Technology
Design of an Integrated Sensor Platform for Vital Sign Monitoring of Newborn Infants at Neonatal Intensive Care Units
Design and tensile properties of aluminum borate whiskers reinforced aluminum composite with low whisker volume fraction
Design of carbon nanotube-based broadband radar absorber for ka-band frequency range
Design of compact wideband QMSIW band-pass filter with improved stopband
Design of real-time filter for the wheel force transducer
Design and optimization of tellurite hybrid microstructured optical fiber with high nonlinearity and low flattened chromatic dispersion for optical parametric amplification
Design and application of 45 kHz, 2 kV electro-optic modulator
Design of Compact, Low-Profile, Wideband, Dual-Frequency Patch Antennas Based on Complementary Co-Directional SRRs
Design of double-layer ceramic absorbers for microwave heating
Design, synthesis and cytotoxic activities of scopoletin-isoxazole and scopoletin-pyrazole hybrids
Design, synthesis, and evaluation of asymmetric EF24 analogues as potential anti-cancer agents for lung cancer
Design and simulation study of the translational-knee lower extremity exoskeleton
Design for MIMO networked control systems based on multi-threshold dead band scheduling
Design of a barcode-like waveguide nanostructure for efficient chip-fiber coupling
Design and implementation of application programming interface for Internet of things cloud
Design and analysis of a novel multi-speed automatic transmission with four degrees-of-freedom
Designing a multiple dependent state sampling plan based on the coefficient of variation
Design and implementation of a Byzantine fault tolerance framework for non-deterministic applications
Design and implementation of a Byzantine fault tolerance framework for Web services
Design and implementation of a consistent time service for fault-tolerant distributed systems
Design and experiment on the intelligent control system for external vehicle lamps
Designing Fault Tolerance Strategy by Iterative Redundancy for Component-Based Distributed Computing Systems
Design and preparation of open circuit potential biosensor for in vitro and in vivo glucose monitoring
Design of business analysis and prediction-oriented decision support system
Design of Photoanodes with TiO2 Bulb Scattering Center and Their Application in Dye Sensitized Solar Cells
Design of non-polarizing thin film edge filters
Design optimization for vibration reduction of viscoelastic damped structures using genetic algorithms
Design of a Quad-Band Wide-Angle Microwave Metamaterial Absorber
Designing public storage warehouses with high demand for revenue maximisation
Design and application of adaptive prediction controller in typical large time delay process in power plant
Design, fabrication and characterization of high temperature piezoelectric vibration sensor using YCOB crystals
Design of active and stable oxygen reduction reaction catalysts by embedding Co (x) O (y) nanoparticles into nitrogen-doped carbon
Design, Implementation, and Measurement of a Crowdsourcing-Based Content Distribution Platform
Design and biogas production characteristics of vertical continuous dry fermentation equipment
Design of PLGA-functionalized quercetin nanoparticles for potential use in Alzheimer's disease
Design of the fibers coupling grooves for MEMS optical switch on (110) silicon
Design and fabrication of slant-counter electrodes for optical switches
Design and optimization of line-start rare-earth permanent magnetic synchronous motor basing on FEM
Design of an electrostatic accelerometer for space test of new equivalence principle
Design of rebalance loop for an electrostatically suspended micromachined gyroscope
Design and fabrication of an electrostatically suspended micromachined gyroscope
Design of electrostatic levitation loop for six-axis micromachined accelerometer
Design and experiments on soil spreading devices of plastic cell-tray type planter for raising super hybrid rice seedlings
Design of a miniaturized zeroth- and first-order resonant antenna with mushroom cells and interdigital capacitors
Design and synthesis of N-methylene-C linked tetrazole and nitramino-1,2,4-triazole: an approach to promising energetic materials
Design, synthesis and structure of uranyl coordination polymers from 2-D layer to 3-D network structure
Design of a modularized automatic measurement and control system for laser-induced breakdown spectrometer
Design and rapid fabrication of a microfluidic fraction collector
Design of high performance financial modelling environment
Design of absorption cells for detecting variety of geological disaster gases
Design and synthesis of MWNTs-TiO2 nanotube hybrid electrode and its supercapacitance performance
Design of a Wideband Dual-Polarization Full-Corporate Waveguide Feed Antenna Array
Design and performance experiment of solar concentrator with fixed strip mirror surface
Design and optimization of HPLWR high pressure Turbine gamma ray shield
Design and performance study of radial inflow turbine used on organic Rankine cycle waste heat power generation system
Design, Construction and Ocean Testing of Wave Energy Conversion System with Permanent Magnet Tubular Linear Generator
Design and analysis of collaborate object detection algorithm in sensor networks
Design of online auctions: Proxy versus non-proxy settings
Design and synthesis of hierarchical NiCo2S4@NiMoO4 core/shell nanospheres for high-performance supercapacitors
Design of a long-term monitoring system for a PSC continuous Boxgirder bridge
Design of mechanically-tunable photonic crystal split-beam nanocavity
Design knowledge representation technique for self-propelled artillery based on ontology and knowledge components
Design and validation of wireless strain test system for bridge based on the resistance strain sensor
Design of a Four-Band and Polarization-Insensitive Terahertz Metamaterial Absorber
Design and Synthesis of Highly Active Al-Ni-P Foam Electrode for Hydrogen Evolution Reaction
Design and performance of a complex-coupled DFB laser with sampled grating
Design, synthesis and docking study of novel tetracyclic oxindole derivatives as alpha-glucosidase inhibitors
Design and synthesis of conjugated polymers of tunable pore size distribution
Design and analysis of magnetic resonance compatibility of ultrasonic motor in surgical robot
Design method of a power management strategy for variable battery capacities range-extended electric vehicles to improve energy efficiency and cost-effectiveness
Design, fabrication, and characterization of a valveless magnetic travelling-wave micropump
Design of fractional order PID controller for automatic regulator voltage system based on multi-objective extremal optimization
Design of multivariable PID controllers using real-coded population-based extremal optimization
Design, Synthesis and Evaluation of Novel Tacrine-Ferulic Acid Hybrids as Multifunctional Drug Candidates against Alzheimer%26apos;s Disease
Design of hundred-bit decoder for ternary optical computer
Design of driving time order for colorized linear TCD2252D based on CPLD technology
Desilication kinetics of calcined boron mud in molten sodium hydroxide media
Design of wide-band bandpass filter using composite right/left-handed transmission line structure
Design optimization of hydrostatic worktable based on multi-layer method of feasible direction
Design of air-cooled bainitic microalloyed steel for a heavy truck front axle beam
Design and synthesis of phosphoryl-substituted diphenylpyrimidines (Pho-DPPYs) as potent Bruton's tyrosine kinase (BTK) inhibitors: Targeted treatment of B lymphoblastic leukemia cell lines
Design, Synthesis and Biological Evaluation of Stilbene Derivatives as Novel Inhibitors of Protein Tyrosine Phosphatase 1B
Design of readout chip for silicon pixel detector
Designed Growth and Characterization of Radially Aligned Ti5Si3 Nanowire Architectures
Design of wide-spectrum inhibitors targeting coronavirus main proteases (vol 3, pg e324, 2005)
Design and optimization of temperature control system for special environment in site museums
Design of efficient microwave absorbers based on multi-layered polyaniline nanofibers and polyaniline nanofibers/Li0.35Zn0.3Fe2.35O4 nanocomposite
Design and application of hardware-in-the-loop simulation system for smart underwater vehicles
Design optimization of secure message communication for energy-constrained distributed real-time systems
Design and parametric optimization of thermal management of lithium-ion battery module with reciprocating air-flow
Design and characterization of 3D hybrid collagen matrixes as a dermal substitute in skin tissue engineering
Design and operation of renewable energy sources based hydrogen supply system: Technology integration and optimization
Design, Synthesis and Biological Evaluation of alpha-Aminophosphonate Derivatives Containing a Pyrazole Moiety
Design Evaluation of DBR Fiber Laser Sensor for Directional Lateral Force Monitoring
Design and test of current driver for MR dampers
Design and experiment of a PDMS-based PCR chip with reusable heater of optimized electrode
Design and Synthesis of Novel C-2-symmetric bis-cinchona Alkaloid Derivatives
Design of PID controller of feed servo-system based on intelligent fuzzy control
Design and implementation of dsp based cross-platform material scratch test control system
Design of a high efficiency and low EMI boost converter using bi-frequency PFM control scheme
Design and implementation of production logistic prediction software system
Designing and implementing a heuristic cross-architecture combination for graph traversal
Design of automatic parting in calibrator CAD for plastic profile extrusion dies via feature recognitions
Design and implementation of an integral design CAD system for plastic profile extrusion die
Design, implementation and evaluation of ASIC-based openflow switch
Design and analysis of a feed-in robot for endoscope type life search and rescue instrument
Design for portable 2-DOF wrist joints rehabilitation robot
Design and Integration for High Performance Robotic Systems Based on Decomposition and Hybridization Approaches
Design and Optimization of a Hybrid-Driven Waist Rehabilitation Robot
Design of multiple-input-multiple-output radar waveforms for Rician target detection
Design of online mine safety detection system based on internet of things
Design of antibacterial biointerfaces by surface modification of poly (epsilon-caprolactone) with fusion protein containing hydrophobin and PA-1
Design and implementation of single input fuzzy controller for Buck DC-DC converter
Design and fabrication of memory devices based on nanoscale polyoxometalate clusters
Design and Microwave Measurement of a Novel Compact TE0n/TE1n '-Mode Converter
Design and microwave measurement of a Ka-band HE11 mode corrugated horn for the Faraday rotator
Design of Ka-band broadband TE01d-TE10W multi-aperture directional coupler
Design of broad-band input coupler of Ka-band TE01 mode gyro-TWT
Design of high power circular multi-aperture array directional coupler
Design and Synthesis of "All-in-One" Multifunctional FeS2 Nanoparticles for Magnetic Resonance and Near-Infrared Imaging Guided Photothermal Therapy of Tumors
Design of a Mg-Li-Al-Zn alloy by means of CALPHAD approach
Design and Realization of Precise Indoor Localization Mechanism for Wi-Fi Devices
Designing a new bloom filter-based index for distributed data management
Design, analysis and modelling of a hybrid controller for serial robotic manipulators
Designing of a type-2 fuzzy logic filter for improving edge-preserving restoration of interlaced-to-progressive conversion
Designing Takagi-Sugeno fuzzy model-based motion adaptive deinterlacing system
Designing and Testing Composite Energy Storage Systems for Regulating the Outputs of Linear Wave Energy Converters
Design and optimization of nano-column array based surface plasmon resonance sensor
Design on mainframe of high power TEA CO2 laser and optimization
Design and stability analysis of driving system in spinning prism Q-switch
Design of a Gamma Densitometer for Hydrocarbon Fuel at High Temperature and Supercritical Pressure
Designs of Langmuir probes for W7-X
Design and experimental verification of seismic mitigation and energy-dissipated equipment for immersion tunnel joint
Design and Evaluation of a Prosthetic Knee Joint Using the Geared Five-Bar Mechanism
Designing a large scale synthesis strategy for high quality magnetite nanocrystals on the basis of a solution behavior regulated formation mechanism
Design and performance analysis of small denture machining equipment
Design and Implementation of a Novel Controllable Reactor Based on Nanocomposite Magnetic Material
Design and comparison of LQR and a novel robust backstepping controller for supercavitating vehicles
Design of a provably secure biometrics-based multi-cloud-server authentication scheme
Design of a nonlinear controller for dynamic ship positioning
Design of continuous circulating sub for gas drilling and the mechanical analysis on the sub body
Design and calibration of a new compound sensor for water content and electrical conductivity in soilless substrates
Design and implementation of monitoring system of agricultural prices based on ice middleware
Design and experimental verification of a novel Mie Doppler wind lidar based on all-fiber Mach-Zehnder frequency discriminator
Design and optimization of wide-band filter based on guided mode resonant grating
Design of guided mode resonant filters tuned by azimuthal angle
Design of a Reconfigurable RFID Sensing Tag as a Generic Sensing Platform Toward the Future Internet of Things
Design of preparation parameters for commendable photocatalytic properties in CuO nanostructures
Design optimization of compressor reed valve based on axiomatic design
Design and Performance Analysis of MISO-ORM-DCSK System over Rayleigh Fading Channels
Design of a quartz crystal with transparent electrode used for both QCM-D and LSPR technology
Design of a 5-axis CNC machine tool applied to dental restoration
Desipramine Ameliorates Cr(VI)-Induced Hepatocellular Apoptosis via the Inhibition of Ceramide Channel Formation and Mitochondrial PTP Opening
Design and fabrication of chemically robust three-dimensional microfluidic valves
Design of Wideband Dual-Polarized Planar Antenna Using Multimode Concept
Design of Cu-Ce co-doped TiO2 for improved photocatalysis
Design and performance evaluation of a highly loaded aerated treatment wetland managing effluents from a food processing industry in Denmark
Design of a transversal equalizer for electronic dispersion compensation in optical communication links
Design and implementation of a pipeline processor for various-size FFTs
Design of a new dynamical core for global atmospheric models based on some efficient numerical methods
Design of a WSN system for condition monitoring of the mechanical equipment with energy harvesting
Design and fabrication of microcantilever probes used for microplasma maskless etching
Design the diffractive optical element with large diffraction angle based on Rayleigh-Sommerfeld Integral
Design of motion parallax stereoscopic display system based on Bilayer microlens array
Design and implementation of Gbps VLSI architecture of the cipher engine orienting to IEEE 802.11ac
Design and implementation of distributed systolic array processor for WLAN MIMO-OFDM systems
Design of special plastic bearings and their application in renewable energy conversion system
Design of the second medium energy beam transport line for China Accelerator Driven System
Designing of ordered two-dimensional gold nanoparticles film for cocaine detection in human urine using surface-enhanced Raman spectroscopy
Design of portable near infrared soil nutrient measuring instrument
Design and realization of ceramic micro-plate thermal isolation semiconductor gas sensor arrays
Designing nanostructured block copolymer surfaces to control protein adhesion
Design of silicon optical modulator based on complete TM photonic band-gap
Design of a phase III multicenter trial to evaluate the efficacy of the RTS,S/AS01 malaria vaccine in children across diverse transmission settings in Africa
Design and coverage of high throughput genotyping arrays optimized for individuals of East Asian, African American, and Latino race/ethnicity using imputation and a novel hybrid SNP selection algorithm
Design, synthesis and vasorelaxant evaluation of novel coumarin-pyrimidine hybrids
Design and synthesis of novel 1,4-benzodiazepine derivatives and their biological evaluation as cholinesterase inhibitors
Designing porosity and topography of poly(1,3-trimethylene carbonate) scaffolds
Designer fabrication: nanotemplates get in shape
Design of field limiting ring employing trench structure for high power devices
Design of a 30 GHz rotary traveling wave oscillator with improved frequency tuning range in 0.18 mu m CMOS technology
Design and Optimization of Uniplanar EBG Structures for Low Profile Antenna Applications and Mutual Coupling Reduction
Designing Frustrated Quantum Magnets with Laser-Dressed Rydberg Atoms
Design of A, B, and C Pulse Forming Networks Using the VINPFN Application
Design and Optimization of Superconducting MRI Magnet Systems With Magnetic Materials
Designing super selectivity in multivalent nano-particle binding
Design of Adaptive Preview Control
Design and test of preference for a new prescription medication label
Design of Haul Road Illumination System for an Opencast Coal Mining Project-A Case Study
Design of a microbial sensor using conducting polymer of 4-(2,5-di(thiophen-2-yl)-1H-pyrrole-1-l) benzenamine
Designing highly efficient enzyme-based carbonaceous foams electrodes for biofuel cells
Design and application of a longitudinal field Aubert permanent magnet composed of identically-shaped blocks for large-scale Magnetic Separation
Design, optimization and calibration of an automated density gauge for firn and ice cores
Design and Manufacturing of a Conduction-Cooled Sample Holder for a Superconducting Property Measurement System
Design and electrochemical study of SnO2-based mixed oxide electrodes
Design of New Electron Acceptor Materials for Organic Photovoltaics: Synthesis, Electron Transport, Photophysics, and Photovoltaic Properties of Oligothiophene-Functionalized Naphthalene Diimides
Design of Microwave Broadband Absorbers Using a Self-Adaptive Differential Evolution Algorithm
Design of Optimum Gain Pyramidal Horn Using Self-Adaptive Differential Evolution Algorithms
Design and NMR-Based Screening of LEF, a Library of Chemical Fragments with Different Local Environment of Fluorine
Design of novel leads: ligand based computational modeling studies on non-nucleoside reverse transcriptase inhibitors (NNRTIs) of HIV-1
Design, Synthesis, Calorimetry, and Crystallographic Analysis of 2-Alkylaminoethyl-1,1-bisphosphonates as Inhibitors of Trypanosoma cruzi Farnesyl Diphosphate Synthase
Design Aspects of Luminescent Organic Crystals
Design of new quantum dot materials for deep tissue infrared imaging
Design and Performance of the First Dual-Coil Magnet at the Wuhan National High Magnetic Field Center
Design of reversibly core cross-linked micelles sensitive to reductive environment
Design, Synthesis, and Biological Evaluation of Nonsteroidal Cycloalkane[d]isoxazole-Containing Androgen Receptor Modulators
Design of Highly Sensitive C2H5OH Sensors Using Self-Assembled ZnO Nanostructures
Desialylation of airway epithelial cells during influenza virus infection enhances pneumococcal adhesion via galectin binding
Design, tests and commissioning of the EMMA injection septum
Design of a trial to evaluate the impact of clinical pharmacists and community health promoters working with African-Americans and Latinos with Diabetes
Design of Enzyme-Mediated Controlled Release Systems Based on Silica Mesoporous Supports Capped with Ester-Glycol Groups
Design of Smart Nanomaterials for Drug and Gene Delivery
Designing and surface modification of zinc oxide nanoparticles for biomedical applications
Designing quantitative structure activity relationships to predict specific toxic endpoints for polybrominated diphenyl ethers in mammalian cells
Design approach for fast-settling two-stage amplifiers employing current-buffer Miller compensation
Design of Robust Digital PID Controller for H-Bridge Soft-Switching Boost Converter
Design and performance of the collective Thomson scattering receiver at ASDEX Upgrade
Design of carboxylated Fe3O4/poly(styrene-co-acrylic acid) ferrofluids with highly efficient magnetic heating effect
Design and synthesis of highly solvatochromic fluorescent 2 '-deoxyguanosine and 2 '-deoxyadenosine analogs
Designing utility-based recommender systems for e-commerce: Evaluation of preference-elicitation methods
Design and Testing a Novel Armature on Railgun
Design and powering of cystic fibrosis clinical trials using pulmonary exacerbation as an efficacy endpoint
Design of Vanadium Complex Catalysts for Precise Olefin Polymerization
Design and Simulation of a New Model for Treatment by NCT
Design and heterologous expression of dengue virus envelope protein (E) peptides and their use for serological diagnosis
Designing coupled microcavity lasers for high-Q modes with unidirectional light emission
Designing label-free electrochemical immunosensors for cytochrome c using nanocomposites functionalized screen printed electrodes
Design of optically stable reflector systems and prisms
Design of mesoporous alumina-ceria films on glass: Compositional tuning leads to mesoscopic transformations
Design of a tobacco exon array with application to investigate the differential cadmium accumulation property in two tobacco varieties
Design and evaluation of consensus PCR assays for henipaviruses
Design of a passification controller for uncertain fuzzy Hopfield neural networks with time-varying delays
Design and Analysis of Method Equivalence Studies
Designing Molecular Switches Based on DNA-Base Mispairing
Design Requirements for Interfering Particles To Maintain Coadaptive Stability with HIV-1
Design of a randomized trial of diabetes genetic risk testing to motivate behavior change: The Genetic Counseling/Lifestyle Change (GC/LC) Study for Diabetes Prevention
Designing the next generation of medicines for malaria control and eradication
Design and Modeling of a New Drive System and Exaggerated Rectilinear-Gait for a Snake-Inspired Robot
Design and optimization of waveguide sensitivity in slot microring sensors
Designing future dark energy space missions II. Photometric redshift of space weak lensing optimized surveys
Design of hierarchical zeolite catalysts by desilication
Design and development of nasal mucoadhesive microspheres containing tramadol HCl for CNS targeting
Design of Ionic Liquid 3-Methyl-1-sulfonic Acid Imidazolium Nitrate as Reagent for the Nitration of Aromatic Compounds by in Situ Generation of NO2 in Acidic Media
Design, synthesis, fabrication and in vitro evalution of mucoadhesive 5-amino-2-mercaptobenzimidazole chitosan as low water soluble drug carriers
Designing TiO2 Based Nanostructures by Control of Surface Morphology of Pure and Silver Loaded Titanate Nanotubes
Designing a sustainable monitoring framework for assessing impacts of climate change at Joshua Tree National Park, USA
Design, building and testing of a stand alone fuel cell hybrid system
Design, history and results of the Thiazolidinedione Intervention with vitamin D Evaluation (TIDE) randomised controlled trial
Design, synthesis and biological evaluation of sugar-derived esters, alpha-ketoesters and alpha-ketoamides as inhibitors for Mycobacterium tuberculosis antigen 85C
Design and synthesis of well-defined glycopolymers for the control of biological functionalities
Design and synthesis of a novel class of inhibitors for mild steel corrosion in acidic and carbon dioxide-saturated saline media
Designing Nonsaccharide, Allosteric Activators of Antithrombin for Accelerated Inhibition of Factor Xa
Designs for electromagnetic cloaking a three-dimensional arbitrary shaped star-domain
Designing Guest Flow and Operations Logistics for the Dolphin Tales
Designing a large-scale emergency logistics network - a case study for Kentucky
Design of a Robust and Indirect Adaptive Fuzzy Sliding Mode Power System Stabilizer Using Particle Swarm Optimization
Design of a Parallel Robotic Manipulator using Evolutionary Computing Regular Paper
Design, Optimization, and Biological Evaluation of Novel Keto-Benzimidazoles as Potent and Selective Inhibitors of Phosphodiesterase 10A (PDE10A)
Designing criteria suites to identify discrete and networked sites of high value across manifestations of biodiversity
Design of an Efficient Gas Distribution System for a Fluidized Bed Dryer
Design and operations of a load-tolerant external conjugate-T matching system for the A2 ICRH antennas at JET
Design and Analysis of a Stage-Scaled Distributed Power Amplifier
Design Considerations in Developing a Text Messaging Program Aimed at Smoking Cessation
Design, Baseline Results of Irbid Longitudinal, School-based Smoking Study
Design and synthesis of several small-size HTLV-I protease inhibitors with different hydrophilicity profiles
Design and Characterization of a Peptide Mimotope of the HIV-1 gp120 Bridging Sheet
Designing and Testing Broadly-Protective Filoviral Vaccines Optimized for Cytotoxic T-Lymphocyte Epitope Coverage
Designed Biointerface Using Near-Infrared Quantum Dots for Ultrasensitive Surface Plasmon Resonance Imaging Biosensors
Desiccation of phyllosilicate-bearing samples as analog for desiccation cracks on Mars: Experimental setup and initial results
Design of a Lightweight, Cost Effective Thimble-Like Sensor for Haptic Applications Based on Contact Force Sensors
Design of a Compact Actuated Compliant Elbow Joint
Design, synthesis and structure of new dendritic melamines. First use of a tandem C-2-substituted serinol-O,O-masked 4-piperidone as a peripheral unit in iterative synthesis
Design and Motion Planning of a Two-Module Collaborative Indoor Pipeline Inspection Robot
Design of Copolymers Based on Sequence Distribution for a Targeted Molecular Weight and Conversion
Design of Translation Rotary Ultrasonic Motor with Slanted Piezoelectric Ceramics
Design and modeling of InAs/GaSb type II superlattice based dual-band infrared detectors
Design and synthesis of potent hydroxyethylamine (HEA) BACE-1 inhibitors carrying prime side 4,5,6,7-tetrahydrobenzazole and 4,5,6,7-tetrahydropyridinoazole templates
Design and Preparation of a Potent Series of Hydroxyethylamine Containing beta-Secretase Inhibitors That Demonstrate Robust Reduction of Central beta-Amyloid
Design of a microfluidic respirometer for semi-continuous amperometric short time biochemical oxygen demand (BODst) analysis
Design of particle-reinforced polyurethane mould materials for soft tooling process using evolutionary multi-objective optimization algorithms
Design considerations for compact microstrip resonant cells dedicated to efficient branch-line miniaturization
Designing the Next Generation of Vaccines for Global Public Health
Design, synthesis, and antitumor evaluation of 2,4,6-triaryl pyridines containing chlorophenyl and phenolic moiety
Design of process parameters for the production of xylose from wood sawdust
Design and Implementation of Two-Dimensional Polymer Adsorption Models: Evaluating the Stability of Candida antarctica Lipase B/Solid-Support Interfaces by QCM-D
Design and Implementation of a Takagi-Sugeno Fuzzy Speed Regulator for a Permanent Magnet Synchronous Motor
Design and implementation of micro-power temperature to duty cycle converter using differential temperature sensing
Design of composite laminates for optimum frequency response
Design and rationale of the comprehensive evaluation of risk factors in older patients with AMI (SILVER-AMI) study
Design of Plasma Surface-Activated, Electrospun Polylactide Non-Wovens with Improved Cell Acceptance
Design of vanadium mixed-ligand complexes as potential anti-protozoa agents
Design of bisquinolinyl malonamides as Zn2+ ion-selective fluoroionophores based on the substituent effect
Design of a Digital Offset Compensator Eliminating Transformer Magnetizing Current Offset of a Phase-Shift Full-Bridge Converter
Design and Synthesis of beta-Site Amyloid Precursor Protein Cleaving Enzyme (BACE1) Inhibitors with in Vivo Brain Reduction of beta-Amyloid Peptides
Design and Manufacture of a Heat Exchanger for Industrial Fast Axial Flow CO2 Lasers
Design and experimental evaluation of a mixed-mode continuous solar dryer for plaster molds
Design and synthesis of C35-fluorinated solamins and their growth inhibitory activities against human cancer cell lines
Design and synthesis of palladium/graphitic carbon nitride/carbon black hybrids as high-performance catalysts for formic acid and methanol electrooxidation
Design of optimal ecosystem monitoring networks: hotspot detection and biodiversity patterns
Design and evaluation of antiretroviral peptides corresponding to the C-terminal heptad repeat region (C-HR) of human immunodeficiency virus type 1 envelope glycoprotein gp41
Design and Evaluation of Learning Motivation, and Achievement on Mobile Knowledge Sharing System for Game Design Course Acceptance
Design and demonstration of a metamaterial with electronically tunable negative refraction across the C microwave band
Design, Synthesis, and Characterization of Nucleic-Acid-Functionalized Gold Surfaces for Biomarker Detection
Designing drugs with multi-target activity: the next step in the treatment of neurodegenerative disorders
Design of HTS 3 dB Hybrid Coupler Using Lumped Elements for Radio Astronomy
Design of highly sensitive volatile organic compound sensors by controlling NiO loading on ZnO nanowire networks
Design, Synthesis, and Cercaricidal Activity of Novel High-efficient, Low-toxic Self-spreading PEG-N-salicylanilide Derivatives Against Cercariae Larvae of Schistosome Japonicum Floating on the Water Surface
Design, analysis and optimization of silicon-on-insulator photonic crystal dual band wavelength demultiplexer
Design of a Microwave Microplasma Source at Atmospheric Pressure
Design of a Microplasma Device for Spatially Localised Plasma Polymerisation
Design of a multiplex PCR assay for the simultaneous detection and confirmation of Neisseria gonorrhoeae
Design and characterization of new lanthanide fluorides and their optical properties
Design and characterization of a microbial fuel cell for the conversion of a lignocellulosic crop residue to electricity
Design and characterization of LSM/ScCeSZ nanocomposite as mixed ionic-electronic conducting material for functionally graded cathodes of solid oxide fuel cells
Design Considerations in Tapped-Inductor Fourth-Order Dual-Band VCO
Designing a decision support system to evaluate and select suppliers using fuzzy analytic network process
Design a new mixed expert decision aiding system using fuzzy ELECTRE III method for vendor selection
Design and Applications of Bioprecursors: A Retrometabolic Approach
Design and computer simulation on multi-effect evaporation seawater desalination system using hybrid renewable energy sources in Turkey
Design study of configurations on system COP for a combined ORC (organic Rankine cycle) and VCC (vapor compression cycle)
Design and activity of a 'dual-targeted' antimicrobial peptide
Design of a stable solid-contact ion-selective electrode based on polyaniline nanoparticles as ion-to-electron transducer for application in process analytical technology as a real-time analyzer
Design of improved password authentication and update scheme based on elliptic curve cryptography
Design and synthesis of a novel anchoring ligand for highly efficient thin film dye-sensitized solar cells
Design of computationally efficient density-based clustering algorithms
Designing biomimetic pores based on carbon nanotubes
Design and analysis of 80-W wideband asymmetrical Doherty amplifier
Desired Educational Outcomes of Disability-Related Training for the Generalist Physician: Knowledge, Attitudes, and Skills
Design of a Bisamidinium Claisen Rearrangement Catalyst for Monodentate Substrates
Design, synthesis, 3D pharmacophore, QSAR, and docking studies of carboxylic acid derivatives as Histone Deacetylase inhibitors and cytotoxic agents
Design, synthesis and preliminary evaluation of a series of histone deacetylase inhibitors carrying a benzodiazepine ring
Design and Experimental Evaluation of a LINC Transmitter for OFDM Systems
Design and synthesis of polyimide - Gold nanofibers with tunable optical properties
Design of Antibacterial Surfaces and Interfaces: Polyelectrolyte Multilayers as a Multifunctional Platform
Designing palmprint based recognition system using local structure tensor and force field transformation for human identification
Designing of type-I polymeric superlattices using genetic and ant algorithms: A comparative study
Designing model protein chains using bioinspired ant algorithm
Design and Conformational Analysis of Peptoids Containing N-Hydroxy Amides Reveals a Unique Sheet-Like Secondary Structure
Design and implementation of reduced-order sliding mode controller for higher-order power factor correction converters
Designed Phosphoprotein Recognition in Escherichia coli
Design, optimization and in vitro evaluation of reverse micelle-loaded lipid nanocarriers containing erlotinib hydrochloride
Design and synthesis of metal-organic frameworks using metal-organic polyhedra as supermolecular building blocks
Design of Efficient Photoinduced Charge Separation in Donor-Copper(I)-Acceptor Triad
Design and synthesis of a new dimeric xanthone derivative: enhancement of G-quadruplex selectivity and telomere damage
Design-Informatics Approach for Intimate Configuration of Silent Supersonic Technology Demonstrator
Design of Carbon Nanotube-Based Gas-Diffusion Cathode for O2 Reduction by Multicopper Oxidases
Design of scalable and efficient multi-radio wireless networks
Design and Parameterization of a Stochastic Cellular Automaton Describing a Chemical Reaction
Design and strength analysis of glass fiber-reinforced epoxy composite shelter
Design and scale-up of an oxidative scrubbing process for the selective removal of hydrogen sulfide from biogas
Design, synthesis and characterization of vanadia-doped iron-oxide pillared montmorillonite clay for the selective catalytic oxidation of H2S
Design and synthesis of novel CCR2 antagonists: Investigation of non-aryl/heteroaryl binding motifs
Design of a Planar UWB Antenna with New Band Enhancement Technique
Design of compact low-pass filter with large reject band using open circuit stubs and two-cascaded DGS quasitriangular resonators
Design and Synthesis of Functional Silsesquioxane-Based Hybrids by Hydrolytic Condensation of Bulky Triethoxysilanes
Designing a safer process for the reaction of TFA with sodium borohydride in THF by calorimetric technique
Design, analysis and implementation of a buck-boost DC/DC converter
Design, spectral characterization, anti-tumor and anti-inflammatory activity of triorganotin(IV) hydroxycarboxylates, apoptosis inducers: In vitro assessment of induction of apoptosis by enzyme, DNA-fragmentation, acridine orange and comet assays
Design and testing of a packaged microfluidic cell for the multiplexed electrochemical detection of cancer markers
Designing a New Strategy for the Formation of IL-in-Oil Microemulsions
Design, Conduct, Analysis, and Interpretation of Clinical Studies in Patients With Impaired Kidney Function
Design and implementation of wind energy system in Saudi Arabia
Designs for size-exclusion separation of macromolecules by densely-engineered mesofilters
Designing metal hydride complexes for water splitting reactions: a molecular electrostatic potential approach
Design and optimization of self-nanoemulsifying drug delivery systems (SNEDDS) for enhanced dissolution of gemfibrozil
Design of Nanostructured Waterborne Adhesives with Improved Shear Resistance
Design of tunable acoustic metamaterials through periodic arrays of resonant shunted piezos
Design of Nanocatalysts for Green Hydrogen Production from Bioethanol
Design of hard surfaces with metal (Hf/V) nitride multinanolayers
Design, synthesis and evaluation of 2-phenylisothiazolidin-3-one-1,1-dioxides as a new class of human protein kinase CK2 inhibitors
Design optimization of a pre-combustion CO2 capture plant embedding experimental knowledge
Design and Implementation of Degenerate Microsatellite Primers for the Mammalian Clade
Design of a model-based feedback controller for active sorting and synchronization of droplets in a microfluidic loop
Design of pressure-driven microfluidic networks using electric circuit analogy
Design of dually foveated imaging optical system
Design and operational parameters of a rooftop rainwater harvesting system: Definition, sensitivity and verification
Design of a sliding mode controller for synchronizing chaotic systems with parameter and model uncertainties and external disturbances
Designing novel nano-immunoassays: antibody orientation versus sensitivity
Design and analysis of an ultra-low-power LC quadrature VCO
Designing nanostructured strontium aluminate particles with high luminescence properties
Designer Microorganisms for Optimized Redox Cascade Reactions - Challenges and Future Perspectives
Design of ultrathin nanostructured polyelectrolyte-based membranes with high perchlorate rejection and high permeability
Design and Optical Properties of Active Polymer-Coated Plasmonic Nanostructures
Design and synthesis of novel chiral dihydroimidazolium cyclophanes as N-heterocyclic carbene precatalysts
Design of an adaptive finite-time controller for synchronization of two identical/different non-autonomous chaotic flywheel governor systems
Designing specific protein-protein interactions using computation, experimental library screening, or integrated methods
Design, Performance and Reinforcement of Bearing-Free Soft Silicone Combustion-Driven Pumps
Design of Optical Fiber Hydrogen Sensor Based on Platinum-Doped Tungsten Trioxide Films
Design and synthesis of a novel fluorescent protein probe for easy and rapid electrophoretic gel staining by using a commonly available UV-based fluorescent imaging system
Design of Selective Gas Sensors Using Additive-Loaded In2O3 Hollow Spheres Prepared by Combinatorial Hydrothermal Reactions
Design of High Channel-Count Comb Filter Based on Digital Concatenated Grating With Multiple Phase Shifts (MPS-DCG)
Design of gas separation membranes derived of rigid aromatic polyimides. 1. Polymers from diamines containing di-tert-butyl side groups
Design of the static var compensator adaptive sliding mode controller considering model uncertainty and time-delay
Design Strategy for a Near-Infrared Fluorescence Probe for Matrix Metalloproteinase Utilizing Highly Cell Permeable Boron Dipyrromethene
Design and Analysis of Sliding Mode Controller Under Approximate Hysteresis Compensation
Design and Development of Anti-Hepatitis B Virus Agents
Design and Synthesis of Monofunctionalized, Water-Soluble Conjugated Polymers for Biosensing and Imaging Applications
Design and validation of a novel immunological test for enterolactone
Designing of Optimized All-Optical Half Adder Circuit Using Single Quantum-Dot Semiconductor Optical Amplifier Assisted Mach-Zehnder Interferometer
Design and synthesis of rhodamine based chemosensors for the detection of Fe3+ ions
Design and synthesis of novel PEG-conjugated 20(S)-camptothecin sulfonylamidine derivatives with potent in vitro antitumor activity via Cu-catalyzed three-component reaction
Design and construct optimum dosimeter to detect airborne radon and thoron gas: Experimental study
Design and validation of an improved graphical user interface with the %26apos;Tool ball%26apos;
Design and utilization of epitope-based databases and predictive tools
Design and validation of consensus-degenerate hybrid oligonucleotide primers for broad and sensitive detection of corona- and toroviruses
Design of experiment approach applied to reducing and oxidizing tolerance of anode supported solid oxide fuel cell. Part II: Electrical, electrochemical and microstructural characterization of tape-cast cells
Design optimisation of switch rails in railway turnouts
Design of Ultrawideband Coplanar Waveguide-Fed Koch-Fractal Triangular Antenna
Design study of an in situ PET scanner for use in proton beam therapy
Design and Synthesis of a Quintessential Self-Transmissible IncX1 Plasmid, pX1.0
Design of variable comb filter using FIR variable fractional delay element
Design of clone-specific probes from genome sequences for rapid PCR-typing of outbreak pathogens
Design and Numerical Analysis of a Button Heat Pulse Probe for Soil Water Content Measurement
Design and synthesis of new hydroxyethylamines as inhibitors of D-alanyl-D-lactate ligase (VanA) and D-alanyl-D-alanine ligase (DdlB)
Designing the reverse supply chain: the impact of the product residual value
Design, Synthesis and Functional Analysis of Dansylated Polytheonamide Mimic: An Artificial Peptide Ion Channel
Design characteristics of virtual learning environments: state of research
Design-based research principles for student orientation to online study: Capturing the lessons learnt
Design and Characterization of Heteroleptic Ruthenium Complexes Containing Benzimidazole Ligands for Dye-Sensitized Solar Cells: The Effect of Fluorine Substituents on Photovoltaic Performance
Design, Optimization and Evaluation of a Polymerase Chain Reaction for Detection of Borrelia spp.
Design of Magnetic Nanoparticles-Assisted Drug Delivery System
Design Improvement of Immobilized Photocatalytic Reactors Using a CFD-Taguchi Combined Method
Design of PSO-Based Fuzzy Logic Controller for Single Axis Magnetic Levitation System
Design and modification of three-component randomly incorporated copolymers for high performance organic photovoltaic applications
Design of tetraphenyl silsesquioxane based covalent-organic frameworks as hydrogen storage materials
Design and control of an advanced PV inverter
Designing a genome-based HIV incidence assay with high sensitivity and specificity
Design, synthesis and pharmacological screening of some [3-benzoyl-5-(4-substituted)-2, 3-dihydro-1,3,4-oxadiazol-2-yl] and [5-(4-substituted)-4H-1, 2, 4-triazol-3-yl] derivatives
Design Requirements for Sensing and Detoxification Devices to be Used in Large Public Spaces. Literature Review on Typical Pollutants and Their Concentrations
Design and Characterization of Two Bifunctional Cryptophane A-Based Host Molecules for Xenon Magnetic Resonance Imaging Applications
Designing heterostructures with higher-temperature superconductivity
Design Strategy of Ion Conductive Polymers
Design and construction of a 110 W green laser for medical application
Design of Novel Dielectric Surface Modifications for Perylene Thin-Film Transistors
Design of solid catalysts for the conversion of biomass
Design, optical and antimicrobial properties of extremely thin alumina films colored with silver nanospecies
Design patent map visualization display
Design of robust fault detection filters for MIMO uncertain plants with quantised information
Design and Performance Analysis of Supercapacitor Charging Circuits for Wireless Sensor Nodes
Design of complex polymeric architectures and nanostructured materials/hybrids by living radical polymerization of hydroxylated monomers
Design of therapeutic vaccines: hepatitis B as an example
Design and Performance of Pilot-Scale Constructed Wetland Treatment Systems for Treating Oilfield Produced Water from Sub-Saharan Africa
Designing and building the next generation of improved vaccine adjuvants
Design of a Concurrent Dual-Band 1.8-2.4-GHz GaN-HEMT Doherty Power Amplifier
Design Optimization and DPD Linearization of GaN-Based Unsymmetrical Doherty Power Amplifiers for 3G Multicarrier Applications
Designing an Effective Microbial Forensics Program for Law Enforcement and National Security Purposes
Design of nanoscale molecular wire based on 3, 6-Diphenyl-1, 2, 4, 5-Tetrazine and effect of external electric field on electron transfer in conjugated molecular wire
Design of nanoscale molecular wire based on diphenylacetylene: Role of linkage
Desilication Mechanism Revisited: Highly Mesoporous All-Silica Zeolites Enabled Through Pore-Directing Agents
Design and Synthesis of Coumarin-Based Zn2+ Probes for Ratiometric Fluorescence Imaging
Design of High Efficiency Monolithic Power Amplifier With Envelope-Tracking and Transistor Resizing for Broadband Wireless Applications
Design of an RGB LED Backlight Circuit for Liquid Crystal Display Panels
Designing molecular devices by altering bond lengths
Designable DNA Functions toward New Nanobiotechnology
Design of Gold Nanoparticle-Based Colorimetric Biosensing Assays
Design and Application of Microfluidic Systems for In Vitro Pharmacokinetic Evaluation of Drug Candidates
Design of U-Shaped In-Phase Power Divider Employing Ground-Slotted Technique for Wideband Applications
Design and evaluation of pH-sensitive liposomes constructed by poly(2-ethyl-2-oxazoline)-cholesterol hemisuccinate for doxorubicin delivery
Design and optimization of non-clogging counter-flow microconcentrator for enriching epidermoid cervical carcinoma cells
Design Optimization of Controller Parameters Used in Variable Speed Wind Energy Conversion System by Genetic Algorithms
Design and analysis of piezoactuated micropump for fuel delivery in automobiles
Design and development of a modular valveless micropump on a printed circuit board for integrated electronic cooling
Design of experiments and detailed uncertainty analysis to develop and validate a solid-phase microextraction/gas chromatography-mass spectrometry method for the simultaneous analysis of 16 pesticides in water
Design and fabrication of Ni nanowires having periodically hollow nanostructures
Design of Catalytically Active Cylindrical and Macroporous Gold Microelectrodes
Design and control of a closed-loop hydraulic energy-regenerative system
Design, Modeling, and Fabrication of MEMS-Based Multicapillary Gas Chromatographic Columns
Design optimization of rotary regenerator using artificial bee colony algorithm
Design and synthesis of nitrogen-containing calcined polymer/carbon nanotube hybrids that act as a platinum-free oxygen reduction fuel cell catalyst
Design Optimization of Vena Cava Filters: An Application to Dual Filtration Devices
Design Guidelines for Efficient Thermal Management of Mid-Infrared Quantum Cascade Lasers
Designer friction laws for bimodal slow slip propagation speeds
Design, Synthesis and Optoelectronic Properties of Aminoacid Derivatives of Poly(arylene ethynylene) Platforms: Hybrid Bio-Synthetic Systems for Sensoring Applications
Design, synthesis and noncentrosymmetric solid state organization of three novel pyridylphosphonic acids
Design stars: how small DNA viruses remodel the host nucleus
Design and implementation of readout circuit on glass substrate with digital correction for touch-panel applications
Design of MFI Zeolite-Based Composites with Hierarchical Pore Structure: A New Generation of Structured Catalysts
Design of an international multicentre RCT on group schema therapy for borderline personality disorder
Design and Implementation of Clinical Trials in Rehabilitation Research
Designed Ankyrin Repeat Proteins as Scaffolds for Multivalent Recognition
Designing Harmonic-Controlled Drivers for Switching Power Amplifiers
Design and Development of a Sun Tracking Mechanism Using the Direct SMA Actuation
Design Considerations and Measured Performance of Nontracked Mirror-Augmented Photovoltaics
Design strategy for new biodegradable Mg-Y-Zn alloys for medical applications
Design and synthesis of immunoconjugates and development of competition inhibition enzyme-linked immunosorbent assay (CIEIA) for the detection of O-isopropyl methylphosphonofluoridate (sarin): An organophosphorous toxicant
Design of experiments to observe radiation stabilized Rayleigh-Taylor instability growth at an embedded decelerating interface
Design of small molecule-responsive microRNAs based on structural requirements for Drosha processing
Design, Synthesis, and Pharmacological Characterization of Indol-3-ylacetamides, Indol-3-yloxoacetamides, and Indol-3-ylcarboxamides: Potent and Selective CB2 Cannabinoid Receptor Inverse Agonists
Design principles of biochemical oscillators
Design, Synthesis, and Characterization of Graphene-Nanoparticle Hybrid Materials for Bioapplications
Design and Evaluation of a Distributed Clustering Algorithm for Mobile ad hoc Networks
Design and aerodynamic investigation of a parallel vehicle on a wide-speed range
Design of Efficiently Encodable Rate-Compatible LDPC Codes Using Vandermonde Extension Matrices
Design and methods of "diaBEAT-it!": A hybrid preference/randomized control trial design using the RE-AIM framework
Design, structural and spectroscopic elucidation, and the in vitro biological activities of new diorganotin dithiocarbamates
Design of Disaster-Resilient Optical Datacenter Networks
Design of a microstrip-fed monopole antenna with a rectangular slit ground and a rectangular projection strip for dual-band WLAN operations
Designing Electrochemical Interfaces with Functionalized Magnetic Nanoparticles and Wrapped Carbon Nanotubes as Platforms for the Construction of High-Performance Bienzyme Biosensors
Design and applications of interpenetrating polymer network hydrogels. A review
Design and economics analysis of an off-grid PV system for household electrification
Design and evaluation of synthetic silica-based monolithic materials in shrinkable tube for efficient protein extraction
Designing Zr-Cu-Co-Al Bulk Metallic Glasses with Phase Separation Mediated Plasticity
Design and validation of a real-time RT-PCR for the simultaneous detection of enteroviruses and parechoviruses in clinical samples
Design characteristics, primary stability and risk of fracture of orthodontic mini-implants: Pilot scan electron microscope and mechanical studies
Design of a New 45 kW(e) High-Flux Solar Simulator for High-Temperature Solar Thermal and Thermochemical Research
Designing nanostructured one-dimensional TiO2 nanotube and TiO2 nanoparticle multilayer composite film as photoanode in dye-sensitized solar cells to increase the charge collection efficiency
Design of double layer frequency selective surfaces with novel multiresonant elements for four-frequency bands
Design, synthesis and characterization of a Pt-Gd metal-organic framework containing potentially catalytically active sites
Design of experiments for determination of influence of different parameters on mechanical properties of semi-solid extruded parts
Design and synthesis of plasticizing fillers based on zirconium phosphonates for glycerol-free composite starch films
Designing nacre-like materials for simultaneous stiffness, strength and toughness: Optimum materials, composition, microstructure and size
Design of a Pt/TiO2-xNx/SrTiO3 triplejunction for effective photocatalytic H-2 production under solar light irradiation
Design, analysis and verification of a knee joint oncological prosthesis finite element model
Design Optimization of Electrical Power Contact Using Finite Element Method
Design and simulation of molecular nonvolatile single-electron resistive switches
Designer hydride routes to 'Si-Ge'/(Gd, Er)(2)O-3/Si(111) semiconductor-on-insulator heterostructures
Design, fabrication and performance evaluation of a vaporizing liquid microthruster
Designing Efficient Localized Surface Plasmon Resonance-Based Sensing Platforms: Optimization of Sensor Response by Controlling the Edge Length of Gold Nanoprisms
Design, fabrication and characterization of plasmonic gratings for SERS
Design and fabrication of optical thin films for remote sensing instruments
Design and fabrication of thin film optical filters to replace fiber Bragg grating in Yb-doped fiber laser
Design properties of hydrogel tissue-engineering scaffolds
Designing a new chitinase with more chitin binding and antifungal activity
Design of a Novel Integration-deficient Lentivector Technology That Incorporates Genetic and Posttranslational Elements to Target Human Dendritic Cells
Design of Transparent Anodes for Resonant Cavity Enhanced Light Harvesting in Organic Solar Cells
Design and fabrication of a light trapping method for photovoltaic devices based on plasmonic gratings
Design of a Single AAV Vector for Coexpression of TH and GCH1 to Establish Continuous DOPA Synthesis in a Rat Model of Parkinson%26apos;s Disease
Design and Synthesis of Dual Thermoresponsive and Antifouling Hybrid Polymer/Gold Nanoparticles
Design and simulation of a micro-channel for separating the particles with nearly constant dielectrophoretic force in channel space
Design of printed dipole antenna for ultra wideband applications
Designing and Experimenting an Auto-Adaptive Controller for a Stand-Alone Photovoltaic System with Hybrid Storage
Designing All-Graphene Nanojunctions by Covalent Functionalization
Design Aspects of Bioreactors for Solid-state Fermentation: A Review
Designing Novel Hybrid Materials by One-Pot Co-condensation: From Hydrophobic Mesoporous Silica Nanoparticles to Superamphiphobic Cotton Textiles
Design and development of antisense drugs
Designing of hollow AgI spheres by ultrasonic spray pyrolysis
Design optimization with chaos embedded great deluge algorithm
Design Principle Study of High Efficiency Compact Fluorescent Lamps
Design of the ITER upper port electron cyclotron heating and current drive system based on remote steering
Designer quantum spin Hall phase transition in molecular graphene
Designer platinum nanoparticles: Control of shape, composition in alloy, nanostructure and electrocatalytic property
Design and Control of Dividing-Wall Column for the Synthesis of n-Propyl Propionate by Reactive Distillation
Design and Control of Dividing-Wall Column for tert-Butanol Dehydration System via Heterogeneous Azeotropic Distillation
Designing a sequential Ugi/Ullmann type reaction for the synthesis of indolo[1,2-a]quinoxalinones catalyzed by CuI/L-proline
Design of custom-made stacked patch antennas: a machine learning approach
Designing patchy particles for optimum interfacial activity
Design of Compatible Optics for Solid-Immersion-Lens-Based Near-Field Recording System and Blu-ray Disc Using Relay Lens
Designing Programs for Populations With Chronic Care Needs: A Blanket or a Quilt?
Design and Synthesis of New 1D and 2D R-isophthalic Acid-based Coordination Polymers (R = Hydrogen or Bromine)
Design and Validation of a High-Temperature Comparative Thermal-Conductivity Measurement System
Design of fuzzy expert system for microarray data classification using a novel Genetic Swarm Algorithm
Design proposal of a photonic multicast Bloom filter node
Desipramine induced changes in the norepinephrine transporter, alpha- and gamma-synuclein in the hippocampus, amygdala and striatum
Design of broadband erbium-doped fiber amplifier using very high-speed integrated circuit hardware description language for next-generation optical network
Design and Synthesis of a Library of Lead-Like 2,4-Bisheterocyclic Substituted Thiophenes as Selective Dyrk/Clk Inhibitors
Design of Novel Potent Antihyperlipidemic Agents with Antioxidant/Anti-inflammatory Properties: Exploiting Phenothiazine's Strong Antioxidant Activity
Design and economic analysis of the technological scheme for 1,3-propanediol production from raw glycerol
Design strategy for optimizing power consumption of sensor node with Min(N,T) policy M/G/1 queuing models
Design and fabrication of single-crystal GaN nano-bridge on homogeneous substrate for nanoindentation
Design and synthesis of porphyrin-containing catenanes and rotaxanes
Design of a dual-axis optoelectronic level for precision angle measurements
Design and fabrication of a microstrip patch antenna with a low radar cross section in the X-band
Design of a Salisbury screen absorber using frequency selective surfaces to improve bandwidth and angular stability performance
Design, baseline characteristics, and retention of African American light smokers into a randomized trial involving biological data
Design of a Three-Dimensional Multitarget Activity Landscape
Design and sizing of stand-alone photovoltaic hydrogen system for HCNG production
Design of wavelength-selective waveplates using genetic algorithm
Designing Crop Plants for Biotic Stresses using Transgenic Approach
Design of functional nanostructured materials using supercritical fluids
Designing the substrate specificity of D-hydantoinase using a rational approach
Design of a static pressure stimulation system for neurophysiological investigation of human middle ear function
Design of biomass processing network for biofuel production using an MILP model
Design Strategies for Ratiometric Chemosensors: Modulation of Excitation Energy Transfer at the Energy Donor Site
Design, synthesis and anticancer evaluation of tetrahydro-beta-carboline-hydantoin hybrids
Design and Synthesis of Urea-Linked Aromatic ligomers-A Route Towards Convoluted Foldamers
Designing Structural Motifs for Clickamers: Exploiting the 1,2,3-Triazole Moiety to Generate Conformationally Restricted Molecular Architectures
Design and Analysis of Wideband Nonuniform Branch Line Coupler and Its Application in a Wideband Butler Matrix
Design of adaptive digital filters for phase extraction in complex fringe patterns obtained using the Ronchi test
Design and Application of Suboptimal Mixed H-2/H-infinity Controllers for Networked Control Systems
Design of New Tetrazine-Triphenylamine Bichromophores - Fluorescent Switching by Chemical Oxidation
Design and synthesis of novel pyrimidine hydroxamic acid inhibitors of histone deacetylases
Design of retrodiffraction gratings for polarization-insensitive and polarization-sensitive characteristics by using the Taguchi method
Designing and Engineering Stem Cell Niches
Design and implementation of a virtual reconfigurable architecture for different applications of intrinsic evolvable hardware
Design and Synthesis of a Luminescent Cyclometalated Iridium(III) Complex Having N,N-Diethylamino Group that Stains Acidic Intracellular Organelles and Induces Cell Death by Photoirradiation
Design curves for temperature rise in sliding elliptical contacts
Design of a smartphone application to monitor stress, asthma symptoms, and asthma inhaler use
Design of adaptive fuzzy-based tracking control of input time delay nonlinear systems
Design and characterization of polytope construct with multiple B and T-H epitopes of Japanese encephalitis virus
Design recommendations for camera-based head-controlled interfaces that replace the mouse for motion-impaired users
Design of a CMAC-based smooth adaptive neural controller with a saturation compensator
Design of mesoporous silica thin films containing single-site photocatalysts and their applications to superhydrophilic materials
Design of MEMS based three-axis motion stage by incorporating a nested structure
Design, fabrication and actuation of four-axis thermal actuating image stabiliser
Design, fabrication and testing of a serial kinematic MEMS XY stage for multifinger manipulation
Design, Synthesis and Properties of Highly Functional Nanostructured Photocatalysts
Designing Caspase-3 Sensors for Imaging of Apoptosis in Living Cells
Designing culturally sensitive dietary interventions for African Americans: review and recommendations
Design methodology of hybrid electric vehicle energy sources: Application to fuel cell vehicles
Design of a robust load frequency control using sequential quadratic programming technique
Design of nano-sized FeOx and Au/FeOx catalysts supported on CeO2 for total oxidation of VOC
Design and Fabrication of Synthetic Air-Jet Micropump
Design, synthesis, and evaluation of inhibitors of Norwalk virus 3C protease
Design, Synthesis, Antibacterial Activity, and Molecular Docking Studies of Novel Hybrid 1,3-Thiazine-1,3,5-Triazine Derivatives as Potential Bacterial Translation Inhibitor
Design, Synthesis, and Photoluminescence Properties of One-, Two-, and Three-Dimensional Coordination Polymers: Anion-Assisted Argentophillic Interactions as Building Blocks
Design of a Bifunctional Ir-Zr Based Metal-Organic Framework Heterogeneous Catalyst for the N-Alkylation of Amines with Alcohols
Designing an audio computer-assisted self-interview (ACASI) system in a multisite trial: A brief report
Design, synthesis and gelation studies of 4,6-O-butylidene-alpha,beta-unsaturated-beta-C-glycosidic ketones: application to plant tissue culture
Desirability function approach: A review and performance evaluation in adverse conditions
Design aspects of sonochemical reactors: Techniques for understanding cavitational activity distribution and effect of operating parameters
Design, synthesis and inhibition activity of novel cyclic peptides against protein tyrosine phosphatase A from Mycobacterium tuberculosis
Design and synthesis of alpha-aminonitrile-functionalized novel retinoids
Designing and encoding models for synthetic biology
Design, synthesis and characterisation of novel photoresponsive poly(methyl methacrylate)
Design, fabrication and characterization of stacked layers planar broadband metamaterial absorber at microwave frequency
Design of a Perfect Black Absorber at Visible Frequencies Using Plasmonic Metamaterials
Designing an Appropriate Computational Model for DNA Nucleoside Hydrolysis: A Case Study of 2 '-Deoxyuridine
Design and in silico screening of inhibitors of the cholera toxin
Design, synthesis, and properties of inorganic and hybrid thin films having periodically organized nanoporosity
Designing a cross-correlation search for continuous-wave gravitational radiation from a neutron star in the supernova remnant SNR 1987A
Design and synthesis of spiro bis(1,2,3-triazolium) salts as chiral ionic liquids
Desilication of ferrierite zeolite for porosity generation and improved effectiveness in polyethylene pyrolysis
Desilication of SSZ-33 zeolite - Post-synthesis modification of textural and acidic properties
Design of hierarchically structured catalysts by mordenites recrystallization: Application in naphthalene alkylation
Design of an 11 kW power factor correction and 10 kW ZVS DC/DC converter for a high-efficiency battery charger in electric vehicles
Design of hierarchical porous aluminas by using one-pot synthesis and different calcination temperatures
Design and studies of novel polyoxysterol-based porphyrin conjugates
Design of Optical XOR, XNOR, NAND, and OR Logic Gates Based on Multi-Mode Interference Waveguides for Binary-Phase-Shift-Keyed Signal
Design Optimization of Compact Wideband Optical Switch Exploiting Staircase Index MMI
Design of a compact polarization demultiplexer for silicon-based slot waveguides
Design of a broadband polarization rotator for silicon-based cross-slot waveguides
Design, synthesis, and spectral parameters of transition metal coordination compounds based on organic autocomplexes
Design and functionality of colloidal-crystal-templated materials-chemical applications of inverse opals
Design, synthesis and pharmacological characterization of coumarin-based fluorescent analogs of excitatory amino acid transporter subtype 1 selective inhibitors, UCPH-101 and UCPH-102
Design and Screening of M13 Phage Display cDNA Libraries
Design, Construction and Evaluation of a Simple Pressurized Solvent Extraction System
Designing bimetallic catalysts for a green and sustainable future
Design of a robust controller on stabilization of stochastic neural networks with time varying delays
Design and synthesis of conformationally constrained N,N-disubstituted 1,4-diazepanes as potent orexin receptor antagonists
Design, synthesis, and structure-activity relationships of a series of novel N-aryl-2-phenylcyclopropanecarboxamide that are potent and orally active orexin receptor antagonists
Designing oral vaccines targeting intestinal dendritic cells
Designing Messages to Motivate Parents To Get Their Preteenage Sons Vaccinated Against Human Papillomavirus
Designed-seamless irradiation technique for extended whole mediastinal proton-beam irradiation for esophageal cancer
Designing Nanogadgetry for Nanoelectronic Devices with Nitrogen-Doped Capped Carbon Nanotubes
Design of nanoswitch based on C-20-bowl molecules: A first principles study
Design and use of biomarkers for the current and future clinical management of brain tumors
Design activities on helical DEMO reactor FFHR-d1
Design of optimized impedance transformer for ICRF antenna in LHD
Design and installation of the closed helical divertor in LHD
Design and selection of curved vane demisters using Taguchi based CFD analysis
Designing modulators of 5-hydroxytryptamine signaling to treat abuse disorders
Design, Synthesis and Antiviral Potential of 14-Aryl/Heteroaryl-14H-dibenzo[a,j]xanthenes Using an Efficient Polymer-Supported Catalyst
Design and Implementation of a High-Efficiency Multiple-Output Resonant Converter for Induction Heating Applications Featuring Wide Bandgap Devices
Design of an Unobtrusive Reaction Force Measurement and Its Application on Treadmills
Desiccation tolerance: From genomics to the field
Desiccation tolerant plants as model systems to study redox regulation of protein thiols
Design and delivery of an e-learning curriculum for physicians involved in the management of pulmonary hypertension
Design of a bi-objective reliable healthcare network with finite capacity queue under service covering uncertainty
Design and characteristics of a stable protein scaffold for specific binding based on variable lymphocyte receptor sequences
Design of an Area-Efficient and Low-Power Hierarchical NoC Architecture Based on Circuit Switching
Designing Patient-Centered Personal Health Records (PHRs): Health Care Professionals' Perspective on Patient-Generated Data
Design, synthesis and stimuli responsive gelation of novel stigmasterol-amino acid conjugates
Design of Sparse Filters for Channel Shortening
Design of delay-dependent state estimator for discrete-time recurrent neural networks with interval discrete and infinite-distributed time-varying delays
Design of state estimator for neural networks with leakage, discrete and distributed delays
Design of Delay-Dependent Exponential Estimator for T-S Fuzzy Neural Networks with Mixed Time-Varying Interval Delays Using Hybrid Taguchi-Genetic Algorithm
Design and implementation of a rectangular frequency invariant beamformer with a full azimuth angle coverage
Design and magnetic properties of L1(0)-FePt/Fe and L1(0)-FePt exchange coupled graded nanodots
Design of short CFRP-reinforced steel tubular columns
Design of CFRP-strengthened steel CHS tubular beams
Designing a Hydrophobic Barrier within Biomimetic Nanopores
Design concept of K-DEMO for near-term implementation
Design, Synthesis and Anticancer Activity Against the MCF-7 Cell Line of Benzo-Fused 1,4-Dihetero Seven- and Six-Membered Tethered Pyrimidines and Purines
Design Considerations and Performance Evaluation of a Compact Aerosol Particle Mass Analyzer
Design and synthesis of new chiral phosphorus-olefin bidentate ligands and their use in the rhodium-catalyzed asymmetric addition of organoboroxines to N-sulfonyl imines
Design of guanidinium porphyrins as potential G-quadruplex ligands
Designer Dirac fermions and topological phases in molecular graphene
Design and quality control of short interfering RNA
Design of optically active nanoclusters of gold particles with mesostructured silica coating
Design of Multifunctional Gold Nanoparticles for In Vitro and In Vivo Gene Silencing
Design and self-assembly of siRNA-functionalized RNA nanoparticles for use in automated nanomedicine
Design for an ultrafast water distributed sensor employing polyvinylamine cross-linked with Cu(II)
Design and performance investigation of a highly accurate apodized fiber Bragg grating-based strain sensor in single and quasi-distributed systems
Design of CNF-based nonlinear integral sliding surface for matched uncertain linear systems with multiple state-delays
Design for inspection of concrete bridges
Designing bioresorbable polyester matrices for controlled doxorubicin release in glioma therapy
Design and analysis of a new structure of InAs/GaAs QDIP for 8-12 mu m infrared windows with low dark current
Design of Sinh-Domain filters using complementary operators
Design and synthesis of D-1 agonist/D-2 antagonist for treatment of schizophrenia
Design of Bandpass Filter Based on Hybrid Planar Waveguide Resonator
Design of Ultra-Wideband Substrate Integrated Waveguide (SIW) Filters in Zigzag Topology
Design of a substrate integrated waveguide (SIW) filter using a novel topology of coupling
Design of jet-driven, radiative-blast-wave experiments for 10 kJ class lasers
Design of UDE-based controllers from their two-degree-of-freedom nature
Design and Development of a Multi-Purpose Low-Cost Hyperspectral Imaging System
Design, Synthesis, and Pharmacological Effects of a Cyclization-Activated Steroid Prodrug for Colon Targeting in Inflammatory Bowel Disease
Design of the RELAXin in Acute Heart Failure Study
Design of magnetic nanoparticles for hepatocellular carcinoma treatment using the control mechanisms of the cell internal nucleus and external membrane
Design of a Multifunctional PLGA Nanoparticulate Drug Delivery System: Evaluation of its Physicochemical Properties and Anticancer Activity to Malignant Cancer Cells
Design and performance evaluation of the functional coating for air purification under indoor conditions
Design, Synthesis and Evaluation of Novel 2-(Aminoalkyl)-isoindoline-1,3-dione Derivatives as Dual-Binding Site Acetylcholinesterase Inhibitors
Design and Analysis of Compact Printed Triple Band-Notched UWB Antenna
Design method for a lumped-element bandpass filter with two resonators and its application to multiplexers
Design, synthesis and evaluation of new alpha-nucleophiles for the hydrolysis of organophosphorus nerve agents: application to the reactivation of phosphorylated acetylcholinesterase
Design and operation assessment of an oxyfuel fluidized bed combustor
Design, synthesis and pharmacophoric model building of novel substituted nicotinic acid hydrazones with potential antiproliferative activity
Design and synthesis of novel 4-(4-oxo-2-arylthiazolidin-3-yl) benzenesulfonamides as selective inhibitors of carbonic anhydrase IX over I and II with potential anticancer activity
Designing of corrosion resistant epoxy coatings embedded with polypyrrole/SiO2 composite
Design and Modeling of a Large-Range Modular XYZ Compliant Parallel Manipulator Using Identical Spatial Modules
Design and characterisation of doxorubicin-releasing chitosan microspheres for anti-cancer chemoembolisation
Desiccation shrinkage of cementitious materials as an aging, poroviscoelastic response
Design of photonic crystals with multiple and combined band gaps
Designing a metallic nanoconcentrator for a lateral multijunction photovoltaic cell
Design of Twin Structures in SiC Nanowires
Design and Immunogenicity of a Novel Synthetic Antigen Based on the Ligand Domain of the Plasmodium vivax Duffy Binding Protein
Design of a Takagi-Sugeno Fuzzy Regulator for a Set of Operation Points
Designing, fabrication and characterization of nanostructured functionally graded HAp/BCP ceramics
Design, synthesis, and spectral luminescent properties of a novel polycarbocyanine series based on the 2,2-difluoro-1,3,2-dioxaborine nucleus
Design of experiments for the development of poly(D,L-lactide-co-glycolide) nanoparticles loaded with Uncaria tomentosa
Design, Synthesis and in vitro Biochemical Activity of Novel Amino Acid Sulfonohydrazide Inhibitors of MurC
Design, Synthesis, Biological Properties, and Molecular Modeling Investigations of Novel Tacrine Derivatives with a Combination of Acetylcholinesterase Inhibition and Cannabinoid CB1 Receptor Antagonism
Design of an adaptive sliding mode controller for synchronization of fractional-order chaotic systems
Design for Health: The Relationship Between Design and Noncommunicable Diseases
Design of composite polymer electrolytes for Li ion batteries based on mechanical stability criteria
Designing probiotics for medical applications
Design of photoactivatable metallodrugs: Selective and rapid light-induced ligand dissociation from half-sandwich [Ru([9]aneS(3))(N-N %26apos;)(py)](2+) complexes
Design of a Fuel-Cell-Powered Catamaran-Type Unmanned Surface Vehicle
Design of analog variable fractional order differentiator and integrator
Design of a prognostic score model for nasopharyngeal carcinoma
Design, development and bioavailability assessment of oxytetracycline hydrochloride double o/w/o microemulsion formulation
Design and synthesis of tryptophan containing peptides as potential analgesic and anti-inflammatory agents
Design, synthesis, and biological evaluation of a novel class of fluorescein-based N-glycosylamines
Design of silicon brains in the nano-CMOS era: Spiking neurons, learning synapses and neural architecture optimization
Design and synthesis of coordination networks containing amide, pyridine and carboxylate functionalities
Design and Characterization of Epitope-Scaffold Immunogens That Present the Motavizumab Epitope from Respiratory Syncytial Virus
Designing a sustainable supply chain using an integrated analytic network process and goal programming approach in quality function deployment
Design, synthesis, and evaluation of novel 3-amino-4-hydrazine-cyclobut-3-ene-1,2-diones as potent and selective CXCR2 chemokine receptor antagonists
Design and Validation of Real-Time Reverse Transcription-PCR Assays for Detection of Pandemic (H1N1) 2009 Virus
Design and implementation of a web-based platform to support interactive environmental planning
Design and Applications of Noncanonical DNA Base Pairs
Design versus discovery in synthetic applications of organoalanes
Design of Randomized Experiments in Networks
Design and Characterization of a New Bioreactor for Continuous Ultra-Slow Uniaxial Distraction of a Three-Dimensional Scaffold-Free Stem Cell Culture
Design, expression, and characterization of a multivalent, combination HIV microbicide
Design of Low-Loss Transmission Lines in Scaled CMOS by Accurate Electromagnetic Simulations
Design and Characterization of Endosomal-pH-Responsive Coiled Coils for Constructing an Artificial Membrane Fusion System
Design and development of microbioreactors for long-term cell culture in controlled oxygen microenvironments
Design and performance assessment of a rice husk fueled stove for household cooking in a typical sub-Saharan setting
Design Feature Sensitivity Analysis in a Numerical Model of an Extrusion Spider Die
Design, Synthesis and In-Vitro Cytotoxicity of Novel Platinum (II) Complexes with Phthalate as the Leaving Group
Design oriented simulation for plasma arc cutting consumables and experimental validation of results
Design, Synthesis, and Biological Evaluation of (E)-N-Aryl-2-arylethenesulfonamide Analogues as Potent and Orally Bioavailable Microtubule-Targeted Anticancer Agents
Design and synthesis of de novo cytotoxic alkaloids by mimicking the bioactive conformation of palitaxel
Design of High-Gain Lens Antenna by Gradient-Index Metamaterials Using Transformation Optics
Design and elaboration of colloidal molecules: an overview
Designer Polymer-Based Microcapsules Made Using Microfluidics
Design, production and optimization of solid lipid microparticles (SLM) by a coaxial microfluidic device
Design of ultrafast all-optical PolSK DMUX based on semiconductor optical amplifiers
Designing New beta-Lactams: Implications from Their Targets, Resistance Factors and Synthesizing Enzymes
Design, synthesis and evaluation of analogs of initiation factor 4E (eIF4E) cap-binding antagonist Bn-7-GMP
Design and Verification of Hardware Building Blocks for High-Speed and Fault-Tolerant In-Vehicle Networks
Designing Si-based nanowall arrays by dynamic shadowing growth to tailor the performance of Li-ion battery anodes
Design, theory, and measurement of a polarization-insensitive absorber for terahertz imaging
Designing polarization insensitive negative index metamaterial for operation in near infrared
Design and Validation of a Conformation-Sensitive Capillary Electrophoresis System for Mutation Identification of the COL7A1 Gene with Automated Peak Comparison
Designing a Multi-Objective, Multi-Support Accuracy Assessment of the 2001 National Land Cover Data (NLCD 2001) of the Conterminous United States
Design and Synthesis of Benzimidazole Analogs Endowed with Oxadiazole as Selective COX-2 Inhibitor
Design, synthesis and structure-activity relationship studies of novel and diverse cyclooxygenase-2 inhibitors as anti-inflammatory drugs
Design and Application of A Novel Photo Ionization Detector
Design of a solar-driven TiO2 nanofilm on Ti foil by self-structure modifications
Design of siliceous lignins - Novel organic/inorganic hybrid sorbent materials
Design, Fabrication and Properties of the Multimode Polymer Planar 1 x 2 Y Optical Splitter
Design and Experimental Characterization of a Multifrequency Flexural Ultrasonic Actuator
Design, Synthesis, and Miniemulsion Polymerization of New Phosphonate Surfmers and Application Studies of the Resulting Nanoparticles as Model Systems for Biomimetic Mineralization and Cellular Uptake
Design of n-type silicon-based quantum cascade lasers for terahertz light emission
Design and simulation of a THz QCL based on Gamma-X depopulation mechanism
Design of small molecule reagents that enable signal amplification via an autocatalytic, base-mediated cascade elimination reaction
Designing passive MRI-safe implantable conducting leads with electrodes
Design, synthesis and insight into the structure-activity relationship of 1,3-disubstituted indazoles as novel HIF-1 inhibitors
Design of Mn porphyrins for treating oxidative stress injuries and their redox-based regulation of cellular transcriptional activities
Design of VLSI Architecture of Autocorrelation-Based Lossless Recompression Engine for Memory-Efficient Video Coding Systems
Design of compact Vivaldi antenna arrays for UWB see through wall applications
Design procedure of a filter-antenna module implemented in substrate integrated waveguide technology
Design of SIW Cavity-Backed Circular-Polarized Antennas Using Two Different Feeding Transitions
Design of a Modular Tetrameric Scaffold for the Synthesis of Membrane-Localized D-Peptide Inhibitors of HIV-1 Entry
Design, Manufacture and Analysis of Composite Epoxy Material with Embedded MWCNT Fibers
Design, manufacture and analysis of composite epoxy material with embedded silicon carbide (SiC) and alumina (Al2O3) nanoparticles/fibers
Designing Micro- and Nano-particles for Treating Rheumatoid Arthritis
Design, synthesis, photophysical and electrochemical properties of 2-(4,5-diphenyl-1-p-aryl-1H-imidazol-2-yl)phenol-based boron complexes
Design Optimization of a Wearable Artificial Pump-Lung Device With Computational Modeling
Design of potent inhibitors of acetylcholinesterase using morin as the starting compound
Designing Compact and Maximally Permissive Deadlock Avoidance Policies for Complex Resource Allocation Systems Through Classification Theory: The Linear Case
Designing Compact and Maximally Permissive Deadlock Avoidance Policies for Complex Resource Allocation Systems Through Classification Theory: The Nonlinear Case
Design and synthesis of naphthalenic derivatives as new ligands at the melatonin binding site MT3
Design of a bioprocess to produce silver nanoparticles
Design of injectable organic-inorganic hybrid for bone tissue repair
Design of a Stirred Multiwell Bioreactor for Expansion of CD34(+) Umbilical Cord Blood Cells in Hypoxic Conditions
Design of a Nanostructured Electromagnetic Polyaniline-Keggin Iron-Clay Composite Modified Electrochemical Sensor for the Nanomolar Detection of Ascorbic Acid
Designing the next lymphadenectomy trial: What should we learn for our prior experiences
Design and Synthesis of Binding Growth Factors
Design and Optimization of a Total Vaporization Technique Coupled to Solid-Phase Microextraction
Design of Semiconducting Indacenodithiophene Polymers for High Performance Transistors and Solar Cells
Design, synthesis and biological evaluation of some novel 3-cinnamoyl-4-hydroxy-2H-chromen-2-ones as antimalarial agents
Design, Synthesis, and Biological Evaluation of 3,4-Dihydroquinolin-2(1H)-one and 1,2,3,4-Tetrahydroquinoline-Based Selective Human Neuronal Nitric Oxide Synthase (nNOS) Inhibitors
Design of potent aspartic protease inhibitors to treat various diseases
Design Concepts, Fabrication and Advanced Characterization Methods of Innovative Piezoelectric Sensors Based on ZnO Nanowires
Design of parameter-scheduled state-feedback controllers using shifting specifications
Design and realization of an experimental cold crucible levitation melting system for light alloys
Design and characterization of highly efficient porphyrin sensitizers for green see-through dye-sensitized solar cells
Design, Self-Assembly, and Molecular Structures of 3D Copper(II) Capsules Templated by BF4- Guest Anions
Design and Synthesis of a Stable Supramolecular Trigonal Prism Formed by the Self-Assembly of a Linear Tetrakis(Zn2+-cyclen) Complex and Trianionic Trithiocyanuric Acid in Aqueous Solution and Its Complexation with DNA (Cyclen=1,4,7,10-Tetraazacyclododecane)
Design and Synthesis of Polytopic Metalloligands Based on Fluoroaryl Gold(I) Organometallic Compounds
Design, Synthesis, and Traveling Wave Ion Mobility Mass Spectrometry Characterization of Iron(II)- and Ruthenium(II)-Terpyridine Metallomacrocycles
Design of Single User Limited Feedback Systems
Design of TiO2/Au nanoparticle films with controlled crack formation and different architectures using a centrifugal strategy
Design and evaluation of micellar nanocarriers for 17-allyamino-17-demethoxygeldanamycin (17-AAG)
Design and fabrication of a superhydrophobic glass surface with micro-network of nanopillars
Design of regional production networks for second generation synthetic bio-fuel - A case study in Northern Germany
Design of TiO2 nanorods and nanotubes doped with lanthanum and comparative kinetic study in the photodegradation of formic acid
Design and synthesis of inhibitors of noroviruses by scaffold hopping
Design of Serum Compatible Tetrary Complexes for Gene Delivery
Designing shape-memory Heusler alloys from first-principles
Design of a SAW-based chemical sensor with its microelectronics front-end interface
Design of an HA2-based Escherichia coli expressed influenza immunogen that protects mice from pathogenic challenge
Design and Synthesis of Benzenesulfonamide Derivatives as Potent Anti-Influenza Hemagglutinin Inhibitors
Design of Escherichia coli-Expressed Stalk Domain Immunogens of H1N1 Hemagglutinin That Protect Mice from Lethal Challenge
Designing Anti-Influenza Aptamers: Novel Quantitative Structure Activity Relationship Approach Gives Insights into Aptamer - Virus Interaction
Designing nanostructured microspheres with well-defined outlines by mixing carboxyl-functionalized amylose and magnetite via ultrasound
Design of Meningococcal Factor H Binding Protein Mutant Vaccines That Do Not Bind Human Complement Factor H
Design and Evaluation of Meningococcal Vaccines through Structure-Based Modification of Host and Pathogen Molecules
Design of artificial miRNA for redundant silencing of Brassica SHP1 and SHP2: transient assay-based validation of transcript cleavage from polyploid Brassicas
Design of a fluorinated magneto-responsive material with tuneable ultrasound scattering properties
Design and manufacturing of protective barriers on Fe 430 B substrates by phenyl methyl polysiloxane coatings: micromechanical response, chemical inertness, and corrosion resistance
Design, Synthesis and Evaluation of Novel 2-piperidinyl Quinoline Chalcones/Amines as Potential Antidepressant Agents
Desilication of a TON zeolite with NaOH: Influence on porosity, acidity and catalytic properties
Design of highly directive cavity type terahertz antenna for wireless communication
Design of state estimator for discrete-time neural networks: Delay-independent approach
Desirable plant root traits for protecting natural and engineered slopes against landslides
Design of photonic crystal Sagnac interferometer using self-collimation effect
Design of non-molecular coordination solids from aqueous solution: [(CuLnX)-L-II(H2O)], where X=SO4, Cl or H2O and L=pyrazole, imidazole or glutamic acid and n=1 or 4
Design, Calibration, and Field Performance of a Miniature Diffusion Size Classifier
Design and rationale of a randomized, double-blind, placebo-controlled phase III study for autologous bone marrow cell transplantation in critical limb ischemia: the BONe Marrow Outcomes Trial in Critical Limb Ischemia (BONMOT-CLI)
Design Strategies for Bivalent Ligands Targeting GPCRs
Design of Microwave Multibandpass Filters with Quasilumped Resonators
Design and Control of a Demand Flow System Assuring Spontaneous Breathing of a Patient Connected to an HFO Ventilator
Design of Renewable Hydrogel Release Systems from Fiberboard Mill Wastewater
Design of Robust Digital Stabilizing Controller for Fourth-Order Boost DC-DC Converter: A Quantitative Feedback Theory Approach
Design of reconfigurable metallic slits for terahertz beam modulation
Design and synthesis of calixarene
Design of forest energy supply networks using multi-objective optimization
Design, characterization, teratogenicity testing, antibacterial, antifungal and DNA interaction of few high spin Fe(II) Schiff base amino acid complexes
Design and Development of a Robotized System Coupled to mu CT Imaging for Intratumoral Drug Evaluation in a HCC Mouse Model
Designing erosion management plans in Lebanon using remote sensing, GIS and decision-tree modeling
Design of wide-angle solar-selective absorbers using aperiodic metal-dielectric stacks
Design and Demonstration of a 5-Bit Flash-Type SFQ A/D Converter Integrated With Error Correction and Interleaving Circuits
Design and testing of high-speed interconnects for superconducting multi-chip modules
Design guidelines for Suzuki stacks as reliable high-speed Josephson voltage drivers
Designing of a fluoride selective receptor through molecular orbital engineering
Design of mixed H-2-dissipative observers with stochastic resilience for discrete-time nonlinear systems
Design and characterization of silver(I) azide coordination polymers based on 1,2-bis(4-pyridyl)ethane and phenazine
Design of an embedded-feed type microstrip patch antenna for UHF radio frequency identification tag on metallic objects
Design Approach for Robust UHF RFID Tag Antennas Mounted on a Plurality of Dielectric Surfaces
Design of a Survivable Hybrid Wireless-Optical Broadband-Access Network
Design, characterization and in vitro evaluation of stavudine-loaded microspheres
Design and Development of Superconducting DC Cable for Railway Applications
Design and construction of a high temperature superconducting power cable cryostat for use in railway system applications
Design, Synthesis, Insecticidal Activity and Structure-Activity Relationship of Aryl Pyrazole 5-Fluorouracil Derivatives
Design of a New Tribometer for Tribological and Viscoelasticity Studies of PTFE Valve Seats
Design of PM Motor Drive Course and DSP Based Robot Traction System Laboratory
Design of TIR optics generating the prescribed irradiance distribution in the circle region
Design and fabrication of a freeform microlens array for uniform beam shaping
Designing coved graphene nanoribbons with charge carrier mobility approaching that of graphene
Design and analysis of large-core high-GVD planar optical waveguide for dispersion compensation
Design of ultra large negative dispersion PCF with selectively tunable liquid infiltration for dispersion compensation
Design and validation of a passive deposition sampler
Design of a two-dimensional metamaterial cloak with minimum scattering using a quadratic transformation function
Designing smart systems to selectively entrap and burst microcapsules
Design and rationale of a Prospective, Observational European Multicenter study on the efficacy of acute surgical decompression after traumatic Spinal Cord Injury: the SCI-POEM study
Design of Surfactant-Substrate Interactions for Roll-to-Roll Assembly of Carbon Nanotubes for Thin-Film Transistors
Design of experiments for statistical modeling and multi-response optimization of nickel electroplating process
Design and Development of RFID Label for Steel Coil
Design and test of a 5 kW(e) high-temperature polymer electrolyte fuel cell system operated with diesel and kerosene
Design of magnetoelectric multiferroic heterostructures by topology optimization
Design of Concrete Tunnel Linings for Fire Safety
Design of Multifunctional Nanomedical Systems
Design and synthesis by ATRP of novel, water-insoluble, lineal copolymers and their application in the development of fluorescent and pH-sensing nanofibres made by electrospinning
Designing high performance biomaterials with architectural manipulation
Design of superconducting multi-pole miniaturized filters with quasi-spiral resonators for decreasing unwanted cross couplings
Designing liquid crystalline nonlinear optical meta-materials with large birefringence and sub-unity refractive index
Design and analysis of processing parameters of hololenses for wavelength selective light filters
Design and Modeling of a Snake Robot Based on Worm-Like Locomotion
Design of Allpass Variable Fractional Delay Filter
Design of allpass variable fractional delay filter with signed powers-of-two coefficients
Design error reduction: toward the effective utilization of building information modeling
Design and synthesis of a near-infrared fluorescent nanofiber precursor for detecting cell-secreted urokinase activity
Design of resonant-cavity-enhanced multi-band photodetectors
Design of Plasmonic Perfect Absorbers for Quantum-well Infrared Photodetection
Design of "smart" segmented polymers by incorporating random copolymers as building blocks
Design of a Fixed-Order RST Controller for Interval Systems: Application to the Control of Piezoelectric Actuators
Design of novel tetra-hetero[8]circulenes: a theoretical study of electronic structure and charge transport characteristics
Design and implementation of intelligent library system
Design and characterization of a spatially distributed multibeam field emission x-ray source for stationary digital breast tomosynthesis
Design considerations for financing a national trust to advance the deployment of geologic CO2 storage and motivate best practices
Design of Power Converters by Optimization Under Multiphysic Constraints: Application to a Two-Time-Scale AC/DC-DC Converter
Design and manufacture of Nd-Fe-B thick coatings by the thermal spray process
Design Method for Ultra-Wideband Bandpass Filter With Wide Stopband Using Parallel-Coupled Microstrip Lines
Design development and performance studies of a novel Single Family Solar Cooker
Design and experimental testing of an innovative building-integrated box type solar cooker
Design and performance of a robust 180 nm CMOS standalone VCO and the integrated PLL
Design of a momentum-based disturbance observer for rigid and flexible joint robots
Design and implementation of a harmony-search-based variable-strength t-way testing strategy with constraints support
Design, expression, and characterization of a novel dendritic cell-targeted proteins
Design of clinical trials of radiation combined with antiangiogenic therapy
Design of a fuzzy sliding-mode synchronization controller for two different chaos systems
Designer reflectors using spoof surface plasmons in the terahertz range
Design and analysis of a silicon-based terahertz plasmonic switch
Design of magnetic coordination complexes for quantum computing
Design of Experiments (DOE) for the Optimization of Hydrothermal Synthesis of Hydroxyapatite Nanoparticles
Designing a Dynamic Data-Driven Application System for Estimating Real-Time Load of Dissolved Organic Carbon in a River
Design of Hierarchical Porous Carbonaceous Foams from a Dual-Template Approach and Their Use as Electrochemical Capacitor and Li Ion Battery Negative Electrodes
Design of concentric ring arrays for low side lobe level using SQP algorithm
Designing a 'green' building: expanding ambitions through social learning
Designing Near-Infrared and Visible Light Emitters by Postsynthetic Modification of Ln(+3)-IRMOF-3
Designing exopolysaccharide-graft-poly(3-hydroxyalkanoate) copolymers for electrospun scaffolds
Design of 2D Binary Colloidal Crystals in a Nematic Liquid Crystal
Design and development of ethosomal transdermal drug delivery system of valsartan with preclinical assessment in Wistar albino rats
Design and experimental verification of multiple delay feedback control for time-delay nonlinear oscillators
Design of Resorbable Porous Tubular Copolyester Scaffolds for Use in Nerve Regeneration
Design of sustainable chemical products - The example of ionic liquids
Design of ionic liquids: an ecotoxicity (Vibrio fischeri) discrimination approach
Design and manufacture of an oven for high temperature experiments of erosion-corrosion of SiCf/SiC into LiPb
Design and Synthesis of Biomimetic Hydrogel Scaffolds with Controlled Organization of Cyclic RGD Peptides
Design, fabrication and characterization of microreactors for high temperature syntheses
Design, synthesis, and biological evaluation of a novel series of bisintercalating DNA-binding piperazine-linked bisanthrapyrazole compounds as anticancer agents
Design of a vector magnet for the measurements of anisotropic magnetoresistance and rotational magneto-optic Kerr effect
Design and Growth Optimization by Dual Ion Beam Sputtered ZnO-Based High-Efficiency Multiple Quantum Well Green Light Emitting Diode
Design and properties of supramolecular polymer gels
Design of fast state observers using a backstepping-like approach with application to synchronization of chaotic systems
Design and Diagnosis of Wideband Coupled-Resonator Bandpass Filters
Design, Synthesis, and Biological Activity of Novel 5-((Arylfuran/1H-pyrrol-2-yl)methylene)-2-thioxo-3-(3-(trifluoromethyl)p henyl)thiazolidin-4-ones as HIV-1 Fusion Inhibitors Targeting gp41
Design of Reset Control Systems: The PI plus CI Compensator
Design of horizontally polarized stepped slot antenna for ultra-wideband applications
Design concept of high-performance flexible tactile sensors with a robust structure
Design, Fabrication and Failure Analysis of Stretchable Electrical Routings
Design of a compact, aluminum, tungsten-coil electrothermal vaporization device for inductively coupled plasma-optical emission spectrometry
Design of a Relatively Inexpensive Ring Laser Seismic Detector
Designation of lenses with a single freeform surface for multiple point sources
Design of a Kinetic Model for Degradation of Substances During Spray Drying Using Yeast Biosuspension, Oil-in-Water Emulsion, and Alumosilicate Suspension
Design of stimuli-responsive dendrimers
Design and Synthesis of New Imidazolinone Derivatives as Potential Antifungal Agents
Design and Implementation of a 40-kV, 20-kJ/s Capacitor Charger for Pulsed-Power Application
Design, operation and validation of a new fluid-sealed direct shear apparatus capable of monitoring fault-related fluid flow to large displacements
Design and synthesis of pironetin analogues with simplified structure and study of their interactions with microtubules
Design and Synthesis of Pironetin Analogue/Colchicine Hybrids and Study of Their Cytotoxic Activity and Mechanisms of Interaction with Tubulin ConcepciOn
Design and performance of multifunctional structural composite capacitors
Design of the magnetic diagnostics unit onboard LISA Pathfinder
Design and synthesis of a novel fluorescence probe for Zn2+ based on the spirolactam ring-opening process of rhodamine derivatives
Design and Control of a Complete Azeotropic Distillation System Incorporating Stripping Columns for Isopropyl Alcohol Dehydration
Design of UV-Vis-NIR panchromatic crown-phthalocyanines with controllable aggregation
Design of a latent thermal energy storage system with embedded heat pipes
Designed Workfunction Engineering of Double-Stacked Metal Nanocrystals for Nonvolatile Memory Application
Design of a combined process for the inactivation of Salmonella Enteritidis in liquid whole egg at 55 degrees C
Design, Synthesis, and Evaluation of Thiazolidinone Derivatives as Antimicrobial and Anti-viral Agents
Design of highly birefringent chalcogenide glass PCF: A simplest design
Design and Characterization of Novel Recombinant Listeriolysin O-Protamine Fusion Proteins for Enhanced Gene Delivery
Design of crystal packings of styrylheterocycles and [2+2] photocycloaddition reactions in their single crystals 6. Synthesis and crystal packings of neutral crown-containing and model styrylheterocycles
Design and Construction of Solid State Ag/AgCl Reference Electrodes Through Electrochemical Deposition of Ag and AgCl Onto a Graphite/Epoxy Resin-Based Composite. Parte 1: Electrochemical Deposition of Ag Onto a Graphite/Epoxy Resin-Based Composite
Design and fabrication of PMMA-micromachined fluid lens based on electromagnetic actuation on PMMA-PDMS bonded membrane
Design of an index for monitoring the environmental quality of tourist beaches from a holistic approach
Design and Operation of a Magnetic Continuously Variable Transmission
Design and Analysis of an Interior Continuous Magnetic Gear Box Using Finite Element Method
Designing and operating a pilot plant for purification of industrial wastewater from toxic organic compounds by utilizing solar energy
Design and one-pot synthesis of alpha-aminophosphonates and bis (alpha-aminophosphonates) by iron(III) chloride and cytotoxic activity
Design, analysis and validation of a simple dynamic model of a submerged membrane bioreactor
Design of aperiodic planar arrays for isoflux radiation in GEO satellites by applying evolutionary optimization
Design of Novel Melatonin Analogs for the Reduction of Intraocular Pressure in Normotensive Rabbits
Design of a fuzzy adaptive controller for MIMO nonlinear time-delay systems with unknown actuator nonlinearities and unknown control direction
Design of Absorptive Coatings for Arbitrarily Shaped Targets for Reduction of Radar Cross Section (RCS) Using an Alternative to the Transformation Optics (TO) Algorithm
Design of a closed-loop supply chain (CLSC) model using an interactive fuzzy goal programming
Design of HIV Protease Inhibitors Based on Inorganic Polyhedral Metallacarboranes
Design of Robust Output Feedback Damping Controller for STATCOM Using PSO Technique
Design and optimization of different P-channel LUDMOS architectures on a 0.18 mu m SOI-CMOS technology
Design and Synthesis of Two Indol-Steroid Derivatives
Design and Synthesis of an Indole-Estrogen Derivative
Design and fabrication of gas sensor based on nanostructure conductive polypyrrole for determination of volatile organic solvents
Design and Validation of a Novel Multiplex Real-Time PCR Assay for Vibrio Pathogen Detection
Design, synthesis, and SAR of N-((1-(4-(propylsulfonyl)piperazin-1-yl)cycloalkyl)methyl)benzamide inhibitors of glycine transporter-1
Design and synthesis of novel anthracene derivatives as n-type emitters for electroluminescent devices: a combined experimental and DFT study
Design of 1-D and 2-D recursive filters using crossover bacterial foraging and Cuckoo search techniques
Design, synthesis, characterization, and in vitro antimicrobial action of novel trisubstituted s-triazines
Design, synthesis and SAR exploration of hybrid 4-chlorophenylthiazolyl-s-triazine as potential antimicrobial agents
Design of neo-glycoconjugates that target the mannose receptor and enhance TLR-independent cross-presentation and Th1 polarization
Designing of New Thermo Stabile Phthalocyanines: Synthesis, Characterization, and Thermal Studies
Design of optimal solvent for extraction of bio-active ingredients from six varieties of Medicago sativa
Design and Implementation of Space Vector PWM Inverter Based on a Low Cost Microcontroller
Design of a compact antenna for bluetooth application
Design of Colloidal and Supported Metal Nanoparticles: Their Synthesis, Characterization, and Catalytic Application
Designerly ways of muddling through
Design and implementation of a t-way test data generation strategy with automated execution tool support
Design and Fabrication of Single-Walled Carbon Nanonet Flexible Strain Sensors
Design of a gas phase simulated moving bed for propane/propylene separation
Design of TiO2 nanomaterials for the photodegradation of formic acid - Adsorption isotherms and kinetics study
Design, and initial experiment results of a novel LH launcher on Alcator C-Mod
Design and adaptation of miniaturized electrochemical devices integrating carbon nanotube-based sensors to commercial CE equipment
Design and tests of 500 kW RF windows for the ITER LHCD system
Designing efficient earthquake early warning systems: case study of Almaty, Kazakhstan
Design, synthesis and biological evaluation of pyrazole derivatives as potential multi-kinase inhibitors in hepatocellular carcinoma
Design and synthesis of benzylpyrazolyl coumarin derivatives via a four-component reaction in water: investigation of the weak interactions accumulating in the crystal structure of a signified compound
Designed transcriptional regulators for trait development
Designing stuffed hetero-fullerene nano-clusters: C26B46N12 and C14B58N12Li12
Design of membrane proteins: toward functional systems
Designed Glucose-Responsive Microgels with Selective Shrinking Behavior
Design and analysis of an innovative light tracking device based on opto-thermo-electro-mechanical actuators
Designing biomimetic reactive polymer gels
Design of self-organized nanostructures to achieve high blocking temperatures in MgO-based d (0) ferromagnets
Design and fabrication of sunlight-redirecting and infrared-insulating microstructure
Design Concept for High-LUMO-level Fullerene Electron-acceptors for Organic Solar Cells
Design, performance and modeling of piezoceramic hollow-sphere microprobe hydrophones
Design and synthesis of biologically active analogues of vitamin K-2: Evaluation of their biological activities with cultured human cell lines
Design of Tri-Band Filters With Improved Band Allocation
Design and analysis of novel compression fracture specimen with constant form factor: Edge cracked semicircular disk (ECSD)
Design of soft lipid nanocarriers based on bioactive vegetable oils with multiple health benefits
Design and Implementation of Solar PV for Power Quality Enhancement in Three-Phase Four-Wire Distribution System
Design of current source hybrid power filter for harmonic current compensation
Design and evaluation of novel pH-sensitive chitosan nanoparticles for oral insulin delivery
Design of fractional order proportional-integral-derivative controller based on moment matching and characteristic ratio assignment method
Design and Control of a Compact High-Dynamic Camera-Orientation System
Design of thermostable luciferases through arginine saturation in solvent-exposed loops
Design Expressions for the Magnetically Insulated Line Oscillator
Design and Engineering of Disulfide Crosslinked Nanocomplexes of Polyamide Polyelectrolytes: Stability under Biorelevant Conditions and Potent Cellular Internalization of Entrapped Model Peptide
Design of ridge filters for spread-out Bragg peaks with Monte Carlo simulation in carbon ion therapy
Design, Synthesis, and Biological Evaluation of Substituted Naphthalene Imides and Diimides as Anticancer Agent
Design methodology for an air-lubricated seal
Design Space Exploration and Data Memory Architecture Design for a Hybrid Nano/CMOS Dynamically Reconfigurable Architecture
Design of self-cleaning TiO2 coating on clay roofing tiles
Design and characterization of a novel amphiphilic chitosan nanocapsule-based thermo-gelling biogel with sustained in vivo release of the hydrophilic anti-epilepsy drug ethosuximide
Design of nanostructures based on aromatic peptide amphiphiles
Design of an Injectable beta-Hairpin Peptide Hydrogel That Kills Methicillin-Resistant Staphylococcus aureus
Design of Protein-Protein Interaction Inhibitors Based on Protein Epitope Mimetics
Design of nickel chelates of tetradentate N-heterocyclic carbenes with subdued cytotoxicity
Design, synthesis, and radiosensitizing activities of sugar-hybrid hypoxic cell radiosensitizers
Design Rules for Charge-Transport Efficient Host Materials for Phosphorescent Organic Light-Emitting Diodes
Design and Control of Chemomuscle: A Liquid-Propellant-Powered Muscle Actuation System
Designing Ultra-High-Birefringent Photonic Crystal Fibers with Circular Air Holes in the Cladding
Design and Implementation of a Home Embedded Surveillance System with Ultra-Low Alert Power
Design of oral insulin delivery systems
Design of embedded capacitor with enhanced high-frequency performance
Designing Dendrimers for Drug Delivery and Imaging: Pharmacokinetic Considerations
Design of sharp transmission filters using band-edge resonances in one-dimensional photonic crystal hetero-structures
Design of epidemiological studies measuring genital and plasma HIV-1 outcomes: lessons from a randomised controlled trial
Design of a highly ordered and uniform porous structure with multisized pores in film and particle forms using a template-driven self-assembly technique
Design and synthesis of enediyne-based peptide with selective peptide-cleaving activity
Design, Synthesis and Characterization of Some Novel 3-Coumarinyl-5-aryliden-1,3-thiazolidine-2,4-diones and Their Antioxidant Activity
Designing meso- and macropore architectures in hybrid organic-inorganic membranes by combining surfactant and breath figure templating (BFT)
Design and Synthesis of Some New 1,3,4-Thiadiazines with Coumarin Moieties and Their Antioxidative and Antifungal Activity
Design of multiplexed fiber optic chemical sensing system using clad-removable optical fibers
Design model for FRP-confined normal- and high-strength concrete square and rectangular columns
Design and fabrication of printed electrowetting-on-dielectric device
Design and Analysis of a Foldable/Unfoldable Corrugated Architectural Curved Envelop
Design, development and technological advancement in the biomass cookstoves: A review
Designing optimal bioethanol networks with purification for integrated biorefineries
Design of high-toughness polyacrylamide hydrogels by hydrophobic modification
Design Principles of Protein Biosynthesis-Coupled Quality Control
Designing functionally graded materials with superior load-bearing properties
Design of LED fish lighting attractors using horizontal/vertical LIDC mapping method
Design of high-efficient freeform LED lens for illumination of elongated rectangular regions
Design and fabrication of a fingerprint imager with compact LED illumination and compact imaging optics
Design and development of dendrimer photosensitizer-incorporated polymeric micelles for enhanced photodynamic therapy
Design of plane sand-bed channels affected by seepage
Designing low thermal conductivity of RuO2 for thermoelectric applications
Designing, Constructing and Immunogenic Evaluation of Polytope DNA Constructs by the Application of Hepatitis C Virus Immunodominant Epitopes in BALB/c Mice
Design considerations in high-sensitivity off-axis integrated cavity output spectroscopy
Design and synthesis of quinolin-2(1H)-one derivatives as potent CDK5 inhibitors
Design and synthesis of 6-oxo-1,6-dihydropyridines as CDK5 inhibitors
Design of a novel G-quenched molecular beacon: A simple and efficient strategy for DNA sequence analysis
Design of a novel molecular beacon: modification of the stem with artificially genetic alphabet
Design, synthesis, and properties of 2 ',4 '-BNA(NC): A bridged nucleic acid analogue
Design and Self-Assembly of a Leucine-Enkephalin Analogue in Different Nanostructures: Application of Nanovesicles
Design of the Compact Tunable Filter With Modified Coupled Lines
Designing hydrophobic sheet protected Eu(III)-tetracycline complex using long chain unsaturated fatty acid: Efficient 'antenna effect' in aqueous medium
Design, construction, and evaluation of a mixed mode solar kiln with black-painted pebble bed for timber seasoning in a tropical setting
Design of Anisotropic Co3O4 Nanostructures: Control of Particle Size, Assembly, and Aspect Ratio
Design and synthesis of chiral hybrid spiro (isoxazole-isoxazoline) ligands
Design and Fabrication of a Nitrogen Monoxide Measurement Device Based on Low Temperature Co-Fired Ceramics
Designed Multiple Ligands for Cancer Therapy
Designing Mice liar Nanocarriers with Improved Drug Loading and Stability Based on Solubility Parameter
Design and Synthesis of Perpendicularly Connected Metal Porphyrin-Imide Dyads for Two-Terminal Wired Single Molecular Diodes
Design and development of papain-urea loaded PVA nanofibers for wound debridement
Design of a wireless electrochemical valve
Design of donor-acceptor star-shaped oligomers for efficient solution-processible organic photovoltaics
Design and Development of a 26-Pole and 24-Slot Bearingless Motor
Design, Synthesis and Evaluation of Cationic Poly(N-substituent acrylamide)s for In Vitro Gene Delivery
Design and development of a hand-held optical probe toward fluorescence diagnostic imaging
Design of a Shape Memory Alloy Actuated Compliant Smart Structure: Elastica Approach
Design and Synthesis of N-Acylated Aza-Goniothalamin Derivatives and Evaluation of Their in vitro and in vivo Antitumor Activity
Design, synthesis, in vitro cytotoxicity evaluation and structure-activity relationship of Goniothalamin analogs
Design and calibration of a single-camera-based stereo vision sensor
Designing the perfect plant feedstock for biofuel production: Using the whole buffalo to diversify fuels and products
Design and synthesis of three-dimensional hierarchical ordered porous carbons for supercapacitors
Design and fabrication of a dielectrophoresis-based cell-positioning and cell-culture device for construction of cell networks
Design and experimental performance of a PV Ice-maker without battery
Design and biological activities of novel inhibitory peptides for SARS-CoV spike protein and angiotensin-converting enzyme 2 interaction
Designs for optical cloaking with high-order transformations
Design of an artificial three-dimensional composite metamaterial with magnetic resonances in the visible range of the electromagnetic spectrum
Design and synthesis of a bis(hydroxyphenyl)diamide bearing a pendant thiazolium unit; application to the catalytic asymmetric intramolecular Stetter reaction
Design and Development of Nanovehicle-Based Delivery Systems for Preventive or Therapeutic Supplementation with Flavonoids
Designing redox potential-controlled protein switches based on mutually exclusive proteins
Design of hierarchical core-corona architectures of layered manganese oxides by aqueous precipitation
Design and fabrication of an aptasensor for chloramphenicol based on energy transfer of CdTe quantum dots to graphene oxide sheet
Design and performance evaluation of a dispersion compensation unit using several chirping functions in a tanh apodized FBG and comparison with dispersion compensation fiber
Design of a robust controller for shift control of an automatic transmission
Designer polymer-quantum dot architectures
Design and synthesis of novel miconazole-based ciprofloxacin hybrids as potential antimicrobial agents
Designing Acceptor Polymers for Organic Photovoltaic Devices
Design, Synthesis, Antibacterial and Antifungal Activity of Novel 2-[(E)-2-aryl-1-ethenyl]-3-(2-sulfanyl-1H-benzo[d]imidazole-5-yl)-3,4-di hydro-4-quinolinones
Design of Porous Silica Supported Tantalum Oxide Hollow Spheres Showing Enhanced Photocatalytic Activity
Design and simulation of an electrically pumped Schottky-junction-based plasmonic amplifier
Design Parameters for Carbon Nanobottles to Absorb and Store Methane
Design and fabrication of ZnO light-emitting devices using filtered cathodic vacuum arc technique
Design and fabrication of zinc oxide thin-film ridge waveguides on silicon substrate with ultraviolet amplified spontaneous emission
Design of Mesoporous Silica/Cytosine-Phosphodiester-Guanine Oligodeoxynucleotide Complexes To Enhance Delivery Efficiency
Designing a collector overlay architecture for fault diagnosis in video networks
Designer labels for plant metabolism: statistical design of isotope labeling experiments for improved quantification of flux in complex plant metabolic networks
Design of graphene and silica co-doped titania composites with ordered mesostructure and their simulated sunlight photocatalytic performance towards atrazine degradation
Designing Novel Nanomaterials through Functionalization of Carbon Nanotubes with Supramolecules for Application in Nuclear Waste Management
Design and Synthesis of New Biprivileged Molecular Scaffolds: Indolo-Fused Benzodiazepinyl/quinoxalinyl benzimidazoles
Design Considerations for Nanowire Heterojunctions in Solar Energy Conversion/Storage Applications
Designing Novel Materials through Functionalization of Carbon Nanotubes for Application in Nuclear Waste Management: Speciation of Uranyl
Design, synthesis, biological evaluation of thiazolyl schiff base derivatives as novel anti-inflammatory agents
Design and Synthesis of a New Class of 4-Aminoquinolinyl- and 9-Anilinoacridinyl Schiff Base Hydrazones as Potent Antimalarial Agents
Design of hemi-urchin shaped ZnO nanostructures for broadband and wide-angle antireflection coatings
Designing two-echelon supply networks
Designing the distribution network for an integrated supply chain
Designer Xanthone: An Inhibitor Scaffold for MDR-Involved Human Glutathione Transferase Isoenzyme A1-1
Design of viral marketing strategies for product cross-sell through social networks
Design of a Polymer Blend for One-Step Porous Fiber Fabrication
Designing the nanoparticle-biomolecule interface for %26quot;targeting and therapeutic delivery%26quot;
Design of Surface Modifications for Nanoscale Sensor Applications
Design optimization of fiber Bragg grating accelerometer for maximum sensitivity
Design optimization of shell and tube heat exchangers using global sensitivity analysis and harmony search algorithm
Design of self-assembled multiferroic nanostructures in epitaxial films
Design and Validation of an Improved Nonferrous Smoking Device for Self-Administration of Smoked Drugs With Concurrent fMRI Neuroimaging
Design and fabrication of a transmitter optical subassembly (TOSA) in 10-Gb/s small-form-factor pluggable (XFP) transceiver
Design of ultra compact all-optical XOR and AND logic gates with low power consumption
Design and evaluation of controlled drug delivery system of buspirone using inorganic layered clay mineral
Design and synthesis of an all-in-one 3-(1,1-difluoroprop-2-ynyl)-3H-diazirin-3-yl functional group for photo-affinity labeling
Designing potentials by sculpturing wires
Design, synthesis, and characterization of novel nanowire structures for photovoltaics and intracellular probes
Design, Synthesis and Antifungal Activity of Some New Imidazole and Triazole Derivatives
Design of SOA-MZI based all-optical programmable logic device (PLD)
Designing chitosan-dextran sulfate nanoparticles using charge ratios
Design and structural studies of diimine/CdX2 (X = Cl, I) complexes based on 2,2-dimethyl-1,3-diaminopropane ligand
Design of 4-electrode optical device for application of vector electric fields to self-assembled quantum dot complexes
Design of macroporous TiO2 thin film photocatalysts with enhanced photofunctional properties
Design, Synthesis, and Testing of Difluoroboron-Derivatized Curcumins as Near-Infrared Probes for in Vivo Detection of Amyloid-beta Deposits
Design and Synthesis of a New Class of Membrane-Permeable Triazaborolopyridinium Fluorescent Probes
Design and analysis of CICABOT: a novel translational parallel manipulator based on two 5-bar mechanisms
Design of a Waveguide Diplexer Based on Connected Bi-Omega Particles
Design of non-aggregating variants of A beta peptide
Design of Glycogen Synthase Kinase-3 Inhibitors: An Overview on Recent Advancements
Design and Evaluation of Multifunctional Nanocarriers for Selective Delivery of Coenzyme Q10 to Mitochondria
Design for electromagnetic wave transparency with metamaterials
Design and construction of geocell foundation to support the embankment on settled red mud
Design of reinforced embankments on soft clay deposits considering the viscosity of both foundation and reinforcement
Design of ultrahigh brightness solar-pumped disk laser
Design of a Genetic Algorithm for the Simulated Evolution of a Library of Asymmetric Transfer Hydrogenation Catalysts
Design and synthesis of 1,4-amino alcohol ligands with a chiral cyclopropane backbone for asymmetric diethylzinc addition to aromatic aldehydes
Design of a robust Ru(salen) complex: aziridination with improved turnover number using N-arylsulfonyl azides as precursors
Design and Characterization of New Ti-Nb-Hf Alloys
Design of T-shaped nanophotonic wire waveguide for optical interconnection in H-tree network
Design and fabrication of SAW pressure, temperature and impedance sensors using novel multiphysics simulation models
Design criteria of neuron/electrode interface. The focused ion beam technology as an analytical method to investigate the effect of electrode surface morphology on neurocompatibility
Design Synthesis of Metasurfaces for Broadband Hybrid-Mode Horn Antennas With Enhanced Radiation Pattern and Polarization Characteristics
Design and implementation of an identifier system for inter-area power oscillations
Design of a new nanostructure comprising mesoporous ZrO2 shell and magnetite core (Fe3O4@mZrO(2)) and study of its phosphate ion separation efficiency
Design of Chiral Bis-phosphoric Acid Catalyst Derived from (R)-3,3 '-Di(2-hydroxy-3-arylphenyl)binaphthol: Catalytic Enantioselective Diels-Alder Reaction of alpha,beta-Unsaturated Aldehydes with Amidodienes
Design, fabrication and characterization of silk fibroin-HPMC-PEG blended films as vehicle for transmucosal delivery
Design, synthesis, and evaluation of small molecule Hsp90 probes
Designing an optimum genetic association study using dense SNP markers and family-based sample
Design of novel polymer-supported chiral catalyst for asymmetric transfer hydrogenation in water
Design and experimental investigation of portable solar thermoelectric refrigerator
Design and assembly of virtual homogeneous catalyst libraries - Towards in silico catalyst optimisation
Design of ultra-sensitive biosensor applying surface plasmon resonance to a triangular resonator
Design of a Neural Network Adaptive Controller via a Constrained Invariant Ellipsoids Technique
Design of differential space-time trellis codes
Design and therapeutic application of matrix metalloproteinase inhibitors
Design of Starch-graft-PEI Polymers: An Effective and Biodegradable Gene Delivery Platform
Designer Livestock
Design of vanadium oxide core-shell nanoplatelets for lithium ion storage
Design of all-optical strain and temperature sensor by micrometer high-birefringence fiber loop mirror
Design, Overexpression, and Purification of Polymerization-Blocked Yeast alpha beta-Tubulin Mutants
Design and measurement of a four-port device using metamaterials
Design and synthesis of novel C-2-symmetric chiral shift reagents derived from squaramide and their recognition of anions and chiral carboxylate anions
Design and analysis of genetic association studies to finely map a locus identified by linkage analysis: Sample size and power calculations
Designing of an efficient multi-aperture, edge pumped thin-disk laser
Design, synthesis and QSAR study of certain isatin-pyridine hybrids as potential anti-proliferative agents
Design of EGDMA-crosslinked theophylline imprinted polymer with high specificity and selectivity
Design and prediction performance of Venturi injectors in drip irrigation
Designing synchronization schemes for fractional-order chaotic system via a single state fractional-order controller
Design rules for donors in bulk-heterojunction solar cells - Towards 10 % energy-conversion efficiency
Designer nucleic acids to probe and program the cell
Design and analysis of a peer-assisted VOD provisioning system for managed networks
Design formulas for damping of a stay cable with a damper
Design of time-delayed connection parameters for inducing amplitude death in high-dimensional oscillator networks
Design of a sialylglycopolymer with a chitosan backbone having efficient inhibitory activity against influenza virus infection
Design, synthesis, and self-assembly of oligothiophene derivatives with a diketopyrrolopyrrole core
Desiccant cooling air conditioning: a review
Designer foods and their benefits: A review
Design and optimization of some collagen-minocycline based hydrogels potentially applicable for the treatment of cutaneous wound infections
Design of weak scattering media for controllable light scattering
Design and understanding of superhydrophobic ZnO nanorod arrays with controllable water adhesion
Designing synchronization schemes for chaotic fractional-order unified systems
Design and optimization of microstructure of auxetic materials
Design and Synthesis of 2-Heterocyclyl-3-arylthio-1H-indoles as Potent Tubulin Polymerization and Cell Growth Inhibitors with Improved Metabolic Stability
Design of molecular catalysts for achievement of high turnover number in homogeneous hydrogenation
Designing Clinical Trials in Amyotrophic Lateral Sclerosis
Designed Hybridization Properties of DNA-Gold Nanoparticle Conjugates for the Ultraselective Detection of a Single-Base Mutation in the Breast Cancer Gene BRCA1
Design of molecular-imprinting metal-complex catalysts
Design, characterization and performance of a molecular imprinting Rh-dimer hydrogenation catalyst on a SiO2 surface
Design of catalytic sites at oxide surfaces by metal-complex attaching and molecular imprinting techniques
Design rules for web crippling of CFRP strengthened aluminium rectangular hollow sections
Design of efficient methanol impermeable membranes for fuel cell applications
Design, Assembly, and Activity of Antisense DNA Nanostructures
Designing a self-associated cationic polymer for enhanced compatibility, palatability, and gastric release of cefuroxime axetil
Designing a Bio-responsive Robot from DNA Origami
Designing strategies for supramolecular luminescent complex of lanthanide-heterometal assembly
Design of photonic band gap filter
Design of coupling for synchronization of chaotic oscillators
Designing coupling for synchronization and amplification of chaos
Design of coupling for synchronization in chaotic maps
Design flood hydrographs from the relationship between flood peak and volume
Design, Synthesis and Evaluation of Cytotoxicity of Novel Chromeno[4,3-b]quinoline Derivatives
Design of Piezoelectric Energy Harvesting Systems: A Topology Optimization Approach Based on Multilayer Plates and Shells
Design of laminated piezocomposite shell transducers with arbitrary fiber orientation using topology optimization approach
Design and structural extension of a supramolecular inclusion-compound host made by the formation of dimers of isonicotinic acid and thiocyanato coordinating bridges
Design and applications of coupled SPE-CE
Design of networked control systems with packet dropouts
Design and exergy analysis of solar roofs: A viable solution with esthetic appeal to collect solar heat
Design and analysis of high-power/high-torque density dual excitation switched-flux machine for traction drive in HEVs
Design, Synthesis and Biological Activities of N-(Substituted benzoy1)-N '-(5-methoxyl-2-methylsulfanylpyrimidin-4-amino)(thio) Ureas
Design of multi-band metamaterial perfect absorbers with stacked metal-dielectric disks
Design Recommendations for a FRP Bridge Deck Supported on Steel Superstructure
Design and characteristics of a sulfide and sulfite optode based on immobilization of methyl violet on a triacetylcellulose membrane
Designing Dirac points in two-dimensional lattices
Design of a unified adaptive fuzzy observer for uncertain nonlinear systems
Design and Synthesis of Small-Molecule Fluorescent Photoprobes Targeted to Aminopeptdase N (APN/CD13) for Optical Imaging of Angiogenesis
Designing an Energy-Efficient Cloud Network [Invited]
Design, synthesis, resolution, and stereochemical assignment of a conformationally rigid chiral ligand derived from anthracene and a dienophile containing a pyridine moiety
Design of a Planar Parallel Robot for Optimal Workspace and Dexterity
Design and Synthesis of Charge-Transfer-Based Conjugated Polyelectrolytes as Multicolor Light-Up Probes
Design of 980 nm-Pumped Waveguide Laser for Continuous Wave Operation in Ion Implanted Er:LiNbO3
Design and characterization of a low temperature gradient and large displacement thermal actuators for in situ mechanical testing of nanoscale materials
Design Relations and Simplified Reactance Formulas for Multi-Orifice Helmholtz Resonators
Design, self-assembly, and photophysical properties of pentameric metallomacrocycles: [M-5(N-hexyl[1,2-bis(2,2 ': 6 ',2 ''-terpyridin-4-yl)] carbazole)(5)][M = Fe(II), Ru(II), and Zn(II)]
Design and operation of fixed bed laterite column for the removal of fluoride from water
Design and Implementation of a Microelectrode Assembly for Use on Noncontact In Situ Electroporation of Adherent Cells
Designing and building nanowires: directed nanocrystal self-assembly into radically branched and zigzag PbS nanowires
Designing polymeric particles for antigen delivery
Design and evaluation of D-alpha tocopheryl polyethylene glycol 1000 succinate emulsified poly-epsilon-caprolactone nanoparticles for protein/peptide drug delivery
Design of Biodegradable Nanoparticles for Oral Delivery of Doxorubicin: In vivo Pharmacokinetics and Toxicity Studies in Rats
Design and construction of nickel hexacyanoferrate - Starburst PAMAM dendrimer modified gold electrodes for the potentiometric detection of potassium in aqueous media
Designing laboratory wind simulations using artificial neural networks
Design of kitting system in lean-based assembly lines
Design and Implementation of a Unity Power Factor Fuzzy Battery Charger using an Ultrasparse Matrix Rectifier
Design and Experiment of a Macro-Micro Planar Maglev Positioning System
Design and Fabrication of Novel Broadband Long-Period Fiber Gratings Using Synthesis Techniques
Design of Dynamic Petri Recurrent Fuzzy Neural Network and Its Application to Path-Tracking Control of Nonholonomic Mobile Robot
Design of Pairing-Based Proxy Signcryption System Model for Online Proxy Auctions
Design of a highly efficient photoelectrolytic cell for hydrogen generation by water splitting: Application of TiO(2-)xC(x) nanotubes as a photoanode and Pt/TiO2 nanotubes as a cathode
Design of mechanical components for vibration reduction in an atomic force microscope
Design of air-guiding modified honeycomb photonic band-gap fibers for effectively single-mode operation
Design equations of two-dimensional dielectric photonic band gap structures
Design of multi-functional dual hole patterned carbon nanotube composites with superhydrophobicity and durability
Designing of multiwalled carbon nanotubes reinforced polyurethane composites as electromagnetic interference shielding materials
Design of photonic crystal microcavities in diamond films
Design and characteristics of a near-elliptic inner cladding High birefringent polarization-stable photonic crystal fiber
Design and in situ synthesis of a Cu-based porous framework featuring isolated double chain magnetic character
Design and Production of a Chimeric Resilin-, Elastin-, and Collagen-Like Engineered Polypeptide
Design of an Ammonium Dinitramide Compatible Polymer Matrix
Designing multiplane computer-generated holograms with consideration of the pixel shape and the illumination wave
Design scenario for the radioisotopic estimation of the biogenic component of airborne particles
Design of solid acid catalysts for aqueous-phase dehydration of carbohydrates: The role of Lewis and Bronsted acid sites
Design and development of TT30, a novel C3d-targeted C3/C5 convertase inhibitor for treatment of human complement alternative pathway-mediated diseases
Design, characterization and magnetic properties of Fe3O4-nanoparticle arrays coated with PEGylated-dendrimers
Designing Optimal Metal-Doped Photocatalysts: Correlation between Photocatalytic Activity, Doping Ratio, and Particle Size
Design and experimental demonstration of a high-directive emission with transformation optics
Design, Synthesis, and Biological Evaluation of 1-[(Biarylmethyl)methylamino]-2-(2,4-difluorophenyl)-3-(1H-1,2,4-triazol -1-yl)propan-2-ols as Potent Antifungal Agents: New Insights into Structure-Activity Relationships
Design and optimization of molecular nanovalves based on redox-switchable bistable rotaxanes
Design of self-assembling peptide nanotubes with delocalized electronic states
Design of Digital Response in Enzyme-Based Bioanalytical Systems for Information Processing Applications
Design and Synthesis of Sn-Porphyrin Based Molecular Gates
Design of fuzzy state feedback controller for robust stabilization of uncertain fractional-order chaotic systems
Design, Synthesis, and Biological Evaluation of Chromone-Based p38 MAP Kinase Inhibitors
Design of the Stenting and Aggressive Medical Management for Preventing Recurrent Stroke in Intracranial Stenosis Trial
Design of Linguistically Interpretable Fuzzy Rule-Based Classifiers: A Short Review and Open Questions
Design and experiments for a class of fuzzy controlled servo systems
Design of adaptive variable structure controllers for T-S fuzzy time-delay systems
Design of hybrid sol-gel films for direct x-ray and electron beam nanopatterning
Design of nanostructured ceria-based solid electrolytes for development of IT-SOFC
Design of high quality doped CeO2 solid electrolytes with nanohetero structure
Design of patch antenna with switchable circular polarization using a branched feed circuit
Design of compact reconfigurable dual frequency microstrip antennas using varactor diodes
Design of a V-shaped surface-mounted monopole array antenna for DCS/PCS operations
Design of symmetric beam pattern reconfigurable antenna
Design of a polarisation reconfigurable patch antenna using ferrimagnetic materials
Design and measurement of beam reconfigurable antenna based on folded dipole structure
Design of electroceramics for solid oxides fuel cell applications: Playing with ceria
Design and development of polymers for gene delivery
Designer DNA Nanoarchitectures
Design and Construction of Double-Decker Tile as a Route to Three-Dimensional Periodic Assembly of DNA
Designed DNA Crystals: Triangles with Short Sticky Ends
Design and characterization of programmable DNA nanotubes
Design and Characterization of 1D Nanotubes and 2D Periodic Arrays Self-Assembled from DNA Multi-Helix Bundles
Design Strategies of Fluorescent Biosensors Based on Biological Macromolecular Receptors
Designed Hairpin Peptides Interfere with Amyloidogenesis Pathways: Fibril Formation and Cytotoxicity Inhibition, Interception of the Preamyloid State
Designing electronic/ionic conducting membranes for artificial photosynthesis
Design and Optimization Aids for Composite Control Charts
Design and evaluation of thermoreversible in situ gelling system of forskolin for the treatment of glaucoma
Design and Characterization of Novel Focusing Elements Based on Photonic Metamaterials
Design Value of the Compressive Strength for Bamboo Fiber-Reinforced Composite Based on a Reliability Analysis
Design, Synthesis, Characterization, and Computational Studies on Benzamide Substituted Mannich Bases as Novel, Potential Antibacterial Agents
Design, synthesis, and performance of NTA-modified lipids as templates for histidine-tagged protein crystallization
Designed molecular propellers based on tetraarylterephthalamide and their chiroptical properties induced by biased helicity through transmission of point chirality
Design of a Dual Latent Heat Sink for Pulsed Electronic Systems
Design, Synthesis and In-Vitro Evaluation of Polymer-linked Prodrug of Methotrexate for the Targeted Delivery to the Colon
Design of turn-around-point long-period gratings in a photonic crystal fiber for refractometry of gases
Design, synthesis and antifungal activity of novel triazole derivatives
Design of a Compact Wavelength Demultiplexer Based on Multimode Interference and Filtering of a Photonic Crystal Structure
Design of a Modified L-Probe Fed Microstrip Patch Antenna
Design of a wideband 377 Omega E-shaped patch antenna for RF energy harvesting
Design of a wideband microstrip antenna and the use of artificial neural networks in parameter calculation
Design and performance evaluation of a novel biomass feeding system
Designing a posture analysis system with hardware implementation
Design and development of Fiber Bragg Grating sensing plate for plantar strain measurement and postural stability analysis
Design Aspects of Bright Red Emissive Silver Nanoclusters/DNA Probes for MicroRNA Detection
Designing optimal tuned mass dampers for nonlinear frames by distributed genetic algorithms
Designed Benzothiadiazole Fluorophores for Selective Mitochondrial Imaging and Dynamics
Designing coupled-resonator optical waveguide delay lines
Design and demonstration of compact, wide bandwidth coupled-resonator filters on a silicon-on-insulator platform
Design of photonic crystal delay lines based on enhanced coupled-cavity waveguides
Design and characterisation of a high efficiency ceramic EBG patch antenna
Design, Synthesis and Biological Evaluation of Some 2-Azetidinone Derivatives as Potential Antihyperlipidemic Agents
Design, Synthesis, and Antihyperlipidemic Evaluation of Novel 2-[1-(Substitutedphenyl)-4-oxo-azetidin-2-yl]-5,6-disubstitutedthieno[2, 3-d]pyrimidin-4(3H)-ones
Design and synthesis of caffeoyl-anilides as portmanteau inhibitors f HIV-1 integrase and CCR5
Designing a molecularly imprinted polymer as an artificial receptor for the specific recognition of creatinine in serums
Design and clinical evaluation of an image-guided surgical microscope with an integrated tracking system
Design of stable nanoporous hybrid chitosan/titania as cooperative bifunctional catalysts
Design and characterization of broadband acoustic composite metamaterials
Design and synthesis of near-infrared-active heptamethine-cyanine dyes to suppress aggregation in a dye-sensitized porous zinc oxide solar cell
Design, synthesis, biophysical and biological studies of trisubstituted naphthalimides as G-quadruplex ligands
Design, synthesis and evaluation of 4,7-diamino-1,10-phenanthroline G-quadruplex ligands
Design and electropolymerization of a new optically active iron tetraspirobifluorenyl porphyrin
Design of microfluidic channels separated by an ultra-thin free-standing dielectric membrane
Design, synthesis, optimization and antiviral activity of a class of hybrid dengue virus E protein inhibitors
Design of a Compact Two-Mode Multi/Demultiplexer Consisting of Multimode Interference Waveguides and a Wavelength-Insensitive Phase Shifter for Mode-Division Multiplexing Transmission
Designer proteins: applications of genetic code expansion in cell biology
Design and synthesis of DNA four-helix bundles
Designed synthesis of uniformly sized iron oxide nanoparticles for efficient magnetic resonance imaging contrast agents
Design and characterization of Ni2+ and Co2+ decorated Porous Magnetic Silica spheres synthesized by hydrothermal-assisted modified-Stober method for His-tagged proteins separation
Design and synthesis of an ortho-phenylenediamine-based open cleft: a selective fluorescent chemosensor for dihydrogen phosphate
Design, synthesis and characterization of monomolecular interfacial layers
Design of concrete-filled steel tubular columns under axial loading according to NBR 8800:2008 and Eurocode 4:2004: tests results and comparisons
Design and Application of Instruction Set Simulator on Multi-Core Verification
Design of renewable poly(amidoamine)/hemicellulose hydrogels for heavy metal adsorption
Designed Architecture of Multiscale Porous TiO2 Nanofibers for Dye-Sensitized Solar Cells Photoanode
Design and Performance Aspects of a Custom-Built Ambient Pressure Photoelectron Spectrometer toward Bridging the Pressure Gap: Oxidation of Cu, Ag, and Au Surfaces at 1 mbar O-2 Pressure
Design of Chemically Stable, Potent, and Efficacious MDM2 Inhibitors That Exploit the Retro-Mannich Ring-Opening-Cyclization Reaction Mechanism in Spiro-oxindoles
Design and synthesis of new bioisosteres of spirooxindoles (MI-63/219) as anti-breast cancer agents
Designed Three-Dimensional Freestanding Single-Crystal Carbon Architectures
Design of dome-shaped non-imaging Fresnel lenses taking chromatic aberration into account
Designing benzosiloles for better optoelectronic properties using DFT & TDDFT approaches
Design of nanostructured cadmium tantalate and niobate and their photocatalytic properties
Designing bistable [2] rotaxanes for molecular electronic devices
Design of graphene-based TiO2 photocatalysts-a review
Design and assessment of a wrapped cylindrical Ca-P AZ31 Mg alloy for critical-size ulna defect repair
Design criteria for stable Pt/C fuel cell catalysts
Design, synthesis and spectroscopic studies of resveratrol aliphatic acid ligands of human serum albumin
Design of Carbon Nanotube Modified Conducting Polymer for Biosensing Applications
Design and synthesis of heterogeneous catalysts: the thermolytic molecular precursor approach
Designer Host-Guest Complexes: Co-Crystals of 1,3-Adamantanedicarboxylic Acid and 4,7-Phenanthroline with Some Guests
Design and evaluation of matrices of Eudragit with polycarbophil and carbopol for colon-specific delivery
Design and in vitro evaluation of formulations with pH and transit time controlled sigmoidal release profile for colon-specific delivery
Design and evaluation of pH modulated controlled release matrix systems for colon specific delivery of indomethacin
Design, Synthesis, Characterization, and Modeling of a Series of S,S-Dioxothienylenevinylene-Based Conjugated Polymers with Evolving Frontier Orbitals
Design and synthesis of magnetic nanoparticles augmented microcapsule with catalytic and magnetic bifunctionalities for dye removal
Design and implementation of an integrated GIS-based cellular automata model to characterize forest fire behaviour
Design of micro-ring resonator-based all-optical logic shifter
Design maps for nanoparticles targeting the diseased microvasculature
Design of K-means clustering-based polynomial radial basis function neural networks (pRBF NNs) realized with the aid of particle swarm optimization and differential evolution
Design, synthesis, and biological activities of novel hexahydropyrazino[1,2-a] indole derivatives as potent inhibitors of apoptosis (IAP) proteins antagonists with improved membrane permeability across MDR1 expressing cells
Design and rationale of the WOEST trial: What is the Optimal antiplatElet and anticoagulant therapy in patients with oral anticoagulation and coronary StenTing (WOEST)
Design of a digital, ultra-broadband electro-optic switch for reconfigurable optical networks-on-chip
Design of optical coupling systems between two-dimensional quasi-stadium laser diodes and single-mode optical fibers
Design, Synthesis, and Photochemistry of Modular Caging Groups for Photoreleasable Nucleotides
Design and testing of a microchannel reactor for the PROX reaction
Design and fabrication of a micro Alvarez lens array with a variable focal length
Design and fabrication of a microlens array by use of a slow tool servo
Design of a 5 ' exonuclease-based real-time PCR assay for simultaneous detection of Bacillus licheniformis, members of the 'B-cereus group' and B-fumarioli in gelatine
Design and construction of a label free aptasensor for electrochemical detection of sodium diclofenac
Design of hybrid titania nanocrystallites as supports for gold catalysts
Design and fabrication of planar multilayer structures with coherent thermal emission characteristics
Design of the steam generator in an energy conversion system based on the aluminum combustion with water
Design of Scandium-Doped USY Zeolite: An Efficient and Green Catalyst for Aza-Diels-Alder Reaction
Design of highly efficient Mo and W-promoted SnO2 solid acids for heterogeneous catalysis: acetalization of bio-glycerol
Design and construction of two rare aqua bridged copper (II) coordination polymers through mixed ligand strategy: Synthesis, characterization and single crystal X-ray structure determination of [Cu(2-iodobenzoate)(2)(beta/gamma-Picoline)(2)(mu-H2O)](n)
Desiccant-based AHU interacting with a CPVT collector: Simulation of energy and environmental performance
Design and performance of an internal heat exchange desiccant wheel
Design and analysis of an original multi-bed dehumidifier used for air-conditioning prototype powered by solar energy
Design of open-framework germanates
Design of open-framework germanates by combining different building units
Design of a tunable time-delay element using multiple gain lines for increased fractional delay with high data fidelity
Design Trend of a Novel Three-Phase Five Layers Switched Reluctance Motor for High Torque Applications
Design and development of POCN-pincer palladium catalysts for C-H bond arylation of azoles with aryl iodides
Design considerations and propagation characteristics of channel Bragg-plasmon-coupled-waveguides
Design of a covalently bonded glycosphingolipid microarray
Design of decision tree via kernelized hierarchical clustering for multiclass support vector machines
Design, Synthesis, and Structure-Activity Relationships of Aminopyridine N-Oxides, a Novel Scaffold for the Potent and Selective Inhibition of p38 Mitogen Activated Protein Kinase
Design and development of an automated flow injection instrument for the determination of arsenic species in natural waters
Designed cyanide- and phenoxide-bridged (FeMnIII)-Mn-III single-molecule magnet constructed by highly blocked paramagnetic precursors
Design, fabrication and characterization of a piezoelectric MEMS diaphragm resonator mass sensor
Design, synthesis, and biological evaluation of 14-substituted aromathecins as topoisomerase I inhibitors
Design and synthesis of 4-amino-2-phenylquinazolines as novel topoisomerase I inhibitors with molecular modeling
Design and synthesis of fluorescent substrates for human tyrosyl-DNA phosphodiesterase I
Design, Synthesis, and Characterization of Functionalized Silepins: High Quantum Yield Blue Emitters
Design of a continuously tunable delay line using vectorial modulational instability and chromatic dispersion in optical fibers
Design and optimization of porous polymer enzymatic digestors for proteomics
Design and synthesis of propeller-shaped dispiroisoxazolinopiperidinochromanones
Design of a MEA with multi-layer electrodes for high concentration methanol DMFCs
Design, Synthesis, and in vitro Antifungal Activity of 1-[(4-Substituted-benzyl)methylamino]-2-(2,4-difluorophenyl)-3-(1H-1,2,4 -triazol-1-yl)propan-2-ols
Designing and implementing a regional urban modeling system using the SLEUTH cellular urban model
Design and Fabrication of Teflon-Coated Tungsten Nanorods for Tunable Hydrophobicity
Design and Development of a Feedback Controller for Boost Converter Using Artificial Immune System
Design of the monolithic polymers used in capillary electrochromatography columns
Design and synthesis of Janus micro- and nanoparticles
Design and Synthesis of High Performance Multifunctional Ultrathin Hematite Nanoribbons
Design of "smart" polymers that can direct intracellular drug delivery
Designing a nanostructure-based modified electrode as a biosensor for simultaneous determination of tryptophan and uric acid
Design and Fabrication of a Novel Hybrid-Structure Heat Pipe for a Concentrator Photovoltaic
Design and modeling of a photovoltaic thermal collector for domestic air heating and electricity production
Design, Synthesis, Characterization, and Biological Evaluation of Triazine Dendrimers Bearing Paclitaxel Using Ester and Ester/Disulfide Linkages
Design of a gonio-spectro-photometer for optical characterization of gonio-apparent materials
Design of Transmission-Type Nth-Order Differentiators in Planar Microwave Technology
Design and characterization of a modified WDM ring network - An analytical approach
Design of IP optical nodes based on AWG with shared tunable wavelength converters
Designing a spiropyran-based molecular switch for carbon nanotube functionalization: Influence of anchor groups and tube-switch separation
Design of machines with compliant bodies for biomimetic locomotion in liquid environments
Design and Fabrication of Biosensing Interface for Waveguide-Mode Sensor
Design and evaluation of a coupled monolithic preconcentrator-capillary zone electrophoresis system for the extraction of immunoglobulin G from human serum
Design of carbon fiber reinforcement of concrete slabs using topology optimization
Design of fluorescent materials for chemical sensing
Designed assemblies of metal halo and pseudohalo coordination polymers with bridging 1-substituted ditetrazoles
Design of an electro-thermally actuated cell microgripper
Design and development of a novel micro-clasp gripper for micromanipulation of complex-shaped objects
Design, implementation and testing of electrostatic SOI MUMPs based microgripper
Design, simulation and testing of electrostatic SOI MUMPs based microgripper integrated with capacitive contact sensor
Design and performance of a solar-powered heating and cooling system using silica gel/water adsorption chiller
Designing large-scale bus network with seasonal variations of demand
Design, modeling and performance monitoring of a photovoltaic-thermal (PVT) water collector
Design of disassembly sequences using search strategies. Application of IDA* in state diagrams
Design and performance prediction of radial ORC turboexpanders
Design of homo-organic acid producing strains using multi-objective optimization
Design of chiral ligands for asymmetric catalysis: From C-2-symmetric P,P- and N,N-ligands to sterically and electronically nonsymmetrical. P,N-ligands
Design of Sensor Data Processing Steps in an Air Pollution Monitoring System
Designer Biomaterials for Nanomedicine
Design and Pharmaceutical Evaluation of a Nano-Enabled Crosslinked Multipolymeric Scaffold for Prolonged Intracranial Release of Zidovudine
Design of Peptide-based Inhibitors for Human Immunodeficiency Virus Type 1 Strains Resistant to T-20
Design, Syntheses and Properties of Nucleic Acid Switch in Response to External Stimuli
Design and Implementation of a Long-Range RFID Reader for Passive Transponders
Design, construction and analysis of short-circuited and probe-fed microstrip based dipole arrays
Designing of a hybrid exponentially weighted moving average control chart using repetitive sampling
Design and Growth of Quaternary Mg and Ga Codoped ZnO Thin Films with Transparent Conductive Characteristics
Design of an ultra-broadband all-optical fractional differentiator with a long-period fiber grating
Design and implementation of a miniaturized CPW-FED antenna with enhanced bandwidth
Design of low-emission and energy-efficient residential buildings using a multi-objective optimization algorithm
Design of totally multiplier-less sharp transition width tree structured filter banks for non-uniform discrete multitone system
Design of Nanostructure Complexes by Droplet Epitaxy
Design at the nanometre scale of multifunctional materials using supercritical fluid chemical deposition
Designing switchable nanosystems for medical application
Design and evaluation of an inlet conditioner to dry particles for real-time particle sizers
Designed electrodeposition of nanoparticles inside conducting polymers
Designing decision support systems for value-based management: A survey and an architecture
Design, synthesis, and preliminary biological evaluation of 2,3-dihydro-3-hydroxymethyl-1,4-benzoxazine derivatives
Design, synthesis, and preliminary biological evaluation of novel ethyl 1-(2 '-hydroxy-3 '-aroxypropyl)-3-aryl-1H-pyrazole-5-carboxylate
Design of a highly sensitive and selective C2H5OH sensor using p-type Co3O4 nanofibers
Design of a 4.5 MJ/1 MW sectored toroidal superconducting energy storage magnet
Design and Development of an Efficient Screw Press Expeller for Oil Expression from Jatropha Curcas Seeds: A Computational Flow Dynamics Study of Expeller for Performance Analysis
Design and evaluation of a novel nanoparticulate-based formulation encapsulating a HIP complex of lysozyme
Design of single-polarization elliptical-hole core circular-hole holey fibers with zero dispersion at 1.55 mu m
Design Optimization of Equiangular Spiral Photonic Crystal Fiber for Large Negative Flat Dispersion and High Birefringence
Designability landscape reveals sequence features that define axial helix rotation in four-helical homo-oligomeric antiparallel coiled-coil structures
Design of new antifungal agents: synthesis and evaluation of 1-[(1H-indol-5-ylmethyl)amino]-2-phenyl-3-(1H-1,2,4-triazol-1-yl)propan- 2-ols
Design and Development of Nanosized DNA Assemblies in Polypod-like Structures as Efficient Vehicles for Immunostimulatory CpG Motifs to Immune Cells
Design and applications of discrete mode Fabry-Perot diode lasers
Design, Characterization, and Applications of Index-Patterned Fabry-Perot Lasers
Design and demonstration of a small-animal up-conversion imager
Design and synthesis of 3-isoxazolidone derivatives as new Chlamydia trachomatis inhibitors
Design, fabrication and performance of a hybrid photovoltaic/thermal (PV/T) active solar still
Design and characterization of Ga-doped indium tin oxide films for pixel electrode in liquid crystal display
Design space optimization using design space adjustment and refinement
Design of three dimensional isotropic microstructures for maximized stiffness and conductivity
Design-dependent loads in topology optimization
Design of Electrothermally Compliant MEMS With Hexagonal Cells Using Local Temperature and Stress Constraints
Design of Compliant Thermal Actuators Using Structural Optimization Based on the Level Set Method
Design of Volatile Mixed-Ligand Tantalum(V) Compounds as Precursors to Ta2O5 Films
Design and synthesis of nanostructured porous SnO2 with high surface areas and their optical and dielectric properties
Design Considerations for CdTe Nanotetrapods as Electronic Devices
Design criteria of wind barriers for traffic. Part 2: decision making process
Design criteria of wind barriers for traffic. Part 1: wind barrier performance
Design of highly sensitive phosphorescence sensor for determination of procaterol hydrochloride based on inhibition of KClO3 oxidation fluorescein isothiocyanate
Design and performance modeling for single-walled carbon nanotubes as local, semiglobal, and global interconnects in gigascale integrated systems
Design and Synthesis of Blue-Emitting Cyclometalated Iridium(III) Complexes Based on Regioselective Functionalization
Designing of carbon nanofilaments-based composites for innovative applications
Designing recombinant Pseudomonas strains to enhance biodesulfurization
Design of plasmonic grating structures towards optimum signal discrimination for biosensing applications
Design, Synthesis, and Biological Evaluation of beta-Lactam Antibiotic-Based Imidazolium- and Pyridinium-Type Ionic Liquids
Design of Compliant Bamboo Poles for Carrying Loads
Design of model-based controllers for a class of nonlinear chaotic systems using a single output feedback and state observers
Design of an Archimedes' spiral based node deployment scheme targeting enhancement of network lifetime in wireless sensor networks
Design of Functionalized Room-Temperature Ionic Liquid-Based Materials for CO2 Separations and Selective Blocking of Hazardous Chemical Vapors
Design, Synthesis, and Pharmacological Characterization of Novel Spirocyclic Quinuclidinyl-Delta(2)-Isoxazoline Derivatives as Potent and Selective Agonists of alpha 7 Nicotinic Acetylcholine Receptors
Design and construction of a confocal laser scanning microscope for biomolecular imaging
Design and synthesis of fluconazole/bile acid conjugate using click reaction
Design, synthesis and spectral studies of novel bile acid-arene conjugates: Trans to cis isomerization of azobenzene core controlled by bile acid hydrophobicity
Design of a compact mode and polarization converter in three-dimensional photonic crystals
Design and synthesis of AX4697, a bisindolylmaleimide exo-affinity probe that labels protein kinase C alpha and beta
Design, fabrication, and evaluation of a multilevel spiral-phase Fresnel zone plate for optical trapping
Design and Synthesis of New Cationic Water-Soluble Pyrene Containing Dendrons for DNA Sensory Applications
Design, synthesis and activity evaluation of mannose-based DC-SIGN antagonists
Design and fabrication of a freeform microlens array for a compact large-field-of-view compound-eye camera
Designing and preparation of cytisine alkaloid surface-imprinted material and its molecular recognition characteristics
Design, Synthesis, and Antibacterial Properties of Dual-Ligand Inhibitors of Acetyl-CoA Carboxylase
Design a new high intensity magnetic separator with permanent magnets for industrial applications
Design, synthesis, and structure-activity relationships of a series of 3-[2-(1-benzylpiperidin-4-yl)ethylamino]pyridazine derivatives as acetylcholinesterase inhibitors
Designing colloidal suspensions for directed materials assembly
Design of mesoporous silica at low acid concentrations in triblock copolymer-butanol-water systems
Design and synthesis of novel photoaffinity reagents for labeling VEGF receptor tyrosine kinases
Design and Synthesis of Fluorescent Probe for Polyhistidine Tag Using Macrocyclic Nickel(II) Complex and Fluorescein Conjugate
Design strategies for bioorthogonal smart probes
Designing Type II Topoisomerase Inhibitors: A Molecular Modeling Approach
Design of TiO2-SiC photocatalyst using TiC-SiC nano-particles for degradation of 2-propanol diluted in water
Design of a new multifunctionalized PAMAM dendrimer with hydrazide-terminated spacer arm suitable for metal-carbonyl multilabeling of aldehyde-containing molecules
Design and synthesis of dipeptidyl glutaminyl fluoromethyl ketones as potent severe acute respiratory syndrome coronovirus (SARS-CoV) inhibitors
Design and synthesis of dual-responsive hydrogels based on N,N-dimethylaminoethyl methacrylate by copolymerization with N-isopropylacrylamide
Design of a High Density SNP Genotyping Assay in the Pig Using SNPs Identified and Characterized by Next Generation Sequencing Technology
Designing of an all-optical scheme for single input ternary logical operations
Design and Validation of a Novel Ferromagnetic Bare Metal Stent Capable of Capturing and Retaining Endothelial Cells
Design of optimally switchable molecules by genetic algorithms
Design of robust active queue management controllers for a class of TCP communication networks
Design of novel ceria-based nano-oxides for CO oxidation and other catalytic applications
Design and experimental characterization of a membrane-based absorption heat pump
Design of natural fiber composites utilizing interfacial crystallinity and affinity
Design and fabrication of a piezoelectric mode 2 sensor based on optical modulated liquid crystal and spiropyran
Design and fabrication of a microfluidic device for near-single cell mRNA isolation using a copper hot embossing master
Design and analysis of humidification dehumidification desalination process
Design and Implementation of an Ribonucleic Acid (RNA) Directed Fragment Library
Design of an empirical index to estimate fuel moisture content from NOAA-AVHRR images in forest fire danger studies
Design and development of quantum dots and other nanoparticles based cellular imaging probe
Designer binary nanostructures toward water slipping superhydrophobic surfaces
Designing hydrogel adhesives for corneal wound repair
Designing dendrimers for biological applications
Designing flow and temperature uniformities in parallel microchannels reactor
Design criteria for a barrier-based gas-liquid flow distributor for parallel microchannels
Designing of interferon-gamma inducing MHC class-II binders
Design and synthesis of phosphorescent iridium containing dendrimers for potential applications in organic light-emitting diodes
Design of stable IIR digital filter based on least p-power error criterion
Design of multichannel DWDM fiber Bragg grating filters by Lagrange multiplier constrained optimization
Design of photonic band gap in one-dimensional SiO2/a-Si photonic crystals
Designed fabrication of a multifunctional polymer nanomedical platform for simultaneous cancer-targeted imaging and magnetically guided drug delivery
Designing supported ZnNi catalysts for the removal of oxygen from bio-liquids and aromatics from diesel
Design and Implementation of Practical Bidirectional Texture Function Measurement Devices Focusing on the Developments at the University of Bonn
Design and Analysis of Inequality-based Fragmented File Carving Algorithms
Design and synthesis of silicon-containing tubulin polymerization inhibitors: Replacement of the ethylene moiety of combretastatin A-4 with a silicon linker
Designing organometallic compounds for catalysis and therapy
Design, synthesis, and antioxidant potency of novel alpha-tocopherol analogues in isolated membranes and intact cells
Design, Synthesis, and Evaluation of an alpha-Helix Mimetic Library Targeting Protein - Protein Interactions
Design of all-solid leakage channel fibers with large mode area and low bending loss
Design of large-mode-area amplifier fibers resistant to bend-induced distortion
Design, synthesis and structure-activity relationship studies of novel sirtuin 2 (SIRT2) inhibitors with a benzamide skeleton
Design of integrated and autonomous conductivity-temperature-depth (CTD) sensors
Design of High Rise Steel Buildings against Terrorist Attacks
Design of iron oxide nanoparticles decorated oleic acid and bovine serum albumin for drug delivery
Design, chirality, and flexibility in nanoporous molecule-based materials
Design of silica-tethered metal complexes for polymerization catalysis
Design of zeolite catalysts for nitroaldol reaction under mild condition
Design and synthesis of chelating diamide sorbents for the separation of lanthanides
Design, synthesis, and aggregation behavior of sandwich mixed (phthalocyaninato) (porphyrinato) europium triple-deckers: Effect of substituent on tuning the intermolecular interaction
Design, Implementation and Control of a Fish Robot with Undulating Fins
Design, Modeling, and Characterization of a Miniature Robotic Fish for Research and Education in Biomimetics and Bioinspiration
Design and Synthesis of Novel Xyloketal Derivatives and Their Protective Activities against H2O2-Induced HUVEC Injury
Design and realization of macroscopic grid architectures mimicking carbon molecules
Designing a family of luminescent hybrid materials by 3-(triethoxysilyl)-propyl isocyanate grafted 2-hydroxynicotinic acid bridge molecules
Design Proposal to Avoid Peeling Failure in FRP-Strengthened Reinforced Concrete Beams
Designing Quantum Rods for Optimized Energy Transfer with Firefly Luciferase Enzymes
Design and Analysis of Multicolor QDIP Based on Metallic Nanoslits Array
Design of a reverberant chamber for noise exposure experiments with small animals
Designing experiences strategically
Design of ionic liquids for lipase purification
Designed pendant chain covalently bonded to analogue of heulandite for removal of divalent toxic metals from aqueous solution: Thermodynamic and equilibrium study (Retracted article. See vol. 357, pg. 559, 2011)
Design of Highly Dense Boron Nitride by the Combination of Spray-Pyrolysis of Borazine and Additive-Free Sintering of Derived Ultrafine Powders
Designing Microstructural Architectures With Thermally Actuated Properties Using Freedom, Actuation, and Constraint Topologies
Designing resilient and sustainable grasslands for a drier future: Adaptive strategies, functional traits and biotic interactions
Design and Implementation of Loose-Coupling Visualization Components in a Distributed Construction Simulation Environment with HLA
Design of selective emitting media within a cylindrical tube for conversion of wasted heat energy to electrical energy
Design of LDPC Decoders for Improved Low Error Rate Performance: Quantization and Algorithm Choices
Design and synthesis of pyridone inhibitors of non-nucleoside reverse transcriptase
Designed modulation of sex steroid signaling inhibits telomerase activity and proliferation of human prostate cancer cells
Design-space dimensionality reduction in shape optimization by Karhunen-Loeve expansion
Design of GNRFET using different doping profiles near the source and drain contacts
Design of efficient rectenna with vertical ground-walls for RF energy harvesting
Desired properties of new phthalocyanines for photodynamic therapy
Design and simulation of a carbon nanotube-based adjustable nano-electromechanical shock switch
Design of Salt-Tolerant Membrane Adsorbers for Viral Clearance
Design of a Tool Integrating Force Sensing With Automated Insertion in Cochlear Implantation
Design of aminated poly(1-vinylimidazole) for a new pH-Sensitive polycation to enhance cell-specific gene delivery
Design, synthesis and evaluation of a novel polymer for gene delivery to mammalian cells
Design and characterization of a carbon-nanotube-reinforced adhesive coating for piezoelectric ceramic discs
Design of silicon hollow waveguide in-line polarizer using a photonic crystal concept
Design of Low-Complexity High-Performance Wavelet Filters for Image Analysis
Design and analysis of small-molecule antineoplastic agents targeting brain tumors by utilizing pattern recognition methods and in silico optimized pharmaceutical properties
Designed hybrid scaffolds consisting of polycaprolactone microstrands and electrospun collagen-nanofibers for bone tissue regeneration
Designing Hollow Nano Gold Golf Balls
Designed metal-binding sites in biomolecular and bioinorganic interactions
Design of a selective metal ion switch for self-assembly of peptide-based fibrils
Design and evaluation of a mechanical nanomanufacturing system for nanomilling
Design of a GMPLS control plane with PCE-based impairment-aware full restoration capability for translucent WSON: Enabling techniques, service demonstration, and performance evaluation
Design of chiral N-triflyl phosphoramide as a strong chiral Bronsted acid and its application to asymmetric Diels-Alder reaction
Design and Manufacture of an Electrical ARC System to Generate Porous Electrodes for Electrochemical Applications
Design, synthesis and biological evaluation of FLT3 covalent inhibitors with a resorcylic acid core
Designed Multiple Ligands: Basic Research vs Clinical Outcomes
Design of an efficient medium for heterologous protein production in Yarrowia lipolytica: case of human interferon alpha 2b
Design Principle of Conjugated Polyelectrolytes to Make Them Water-Soluble and Highly Emissive
Design and implementation of a sensitive high-resolution nonlinear spectral imaging microscope
Designing cooperativity into the designed protein Top7
Designing scaffolds of peptides for phage display libraries
Design of a secondary ionization target for direct production of a C- beam from CO2 pulses for online AMS
Design of interpretable fuzzy rule-based classifiers using spectral analysis with structure and parameters optimization
Design of optimized fuzzy model-based controller for nonlinear systems using hybrid intelligent strategies
Design Considerations for 60 GHz Transformer-Coupled CMOS Power Amplifiers
Design of EGFR kinase inhibitors: A ligand-based approach and its confirmation with structure-based studies
Design of a robust digital controller for congestion control in Internet
Design of long-period gratings in cladding-pumped microstructured optical fiber
Design of Escherichia coli Cell Culture for Regulating Alanine Production under Aerobic Conditions
Design of compact long-period gratings imprinted in optimized photonic crystal fibers
Design comparison and magnetic control of negative permeability metamaterials
Design and stabilization of block copolymer micelles via phenol-pyridine hydrogen-bonding interactions
Design and analysis of a gallium nitride-on-sapphire tunable photonic crystal directional coupler
Design and fabrication of GaN crystal ultra-small lateral comb-drive actuators
Design of a dual-band V-shaped monople antenna for DCS/2.4-GHz WLAN operations
Design and installation of DC plasma reactor for SiC nanoparticle production
Design of light scattering in nanowire materials for photovoltaic applications
Designing ideal conduits for peripheral nerve repair
Design and application of a magnetic field gradient electrode
Design optimization of a tubular solar receiver with a porous medium
Design of a high temperature cavity receiver for residential scale concentrated solar power
Design, synthesis, structure, and spectroscopic and electrochemical properties of phthalocyanines
Design and Analysis of Classifier Learning Experiments in Bioinformatics: Survey and Case Studies
Design Optimization of a Polymer Electolyte Membrane Fuel Cell, PEMFC
Design, Synthesis, and Biological Evaluation of Novel Transrepression-Selective Liver X Receptor (LXR) Ligands with 5,11-Dihydro-5-methyl-11-methylene-6H-dibenz[b,e]azepin-6-one Skeleton
Design of multifunctional diffractive optical elements
Design of Bcl-2 and Bcl-xL Inhibitors with Subnanomolar Binding Affinities Based upon a New Scaffold
Designing a reliable leak bio-detection system for natural gas pipelines
Design, synthesis and SAR of thienopyridines as potent CHK1 inhibitors
Design of novel unapodized and apodized step-chirped quasi-phase matched gratings for broadband frequency converters based on second-harmonic generation
Design and Validation of a Microarray for Detection, Hemagglutinin Subtyping, and Pathotyping of Avian Influenza Viruses
Design, Synthesis, and X-ray Crystallographic Studies of alpha-Aryl Substituted Fosmidomycin Analogues as Inhibitors of Mycobacterium tuberculosis 1-Deoxy-D-xylulose 5-Phosphate Reductoisomerase
Design and development of electronic- and micro-structures for multi-functional working electrodes in dye-sensitized solar cells
Desiccant wheel regenerated by thermal energy from a microcogenerator: Experimental assessment of the performances
Design and laboratory testing of a chamber device to measure total flux of volatile organic compounds from the unsaturated zone under natural conditions
Design of molecular dyes for application in photoelectrochemical and electrochromic devices based on nanocrystalline metal oxide semiconductors
Design and Stability Analysis for Anytime Control via Stochastic Scheduling
Design optimization of spring of a locking nut using design of experiments
Design of multifunctional FePt/GO nanocomposites for targeting, dual-modal imaging diagnostic and in situ therapeutic potential theranostic platform
Design alternatives for wavelength routing networks
Design of chitosan gel pore structure: towards enzyme catalyzed flow-through electrodes
Designing a high-yielding maize ideotype for a changing climate in Lombardy plain (northern Italy)
Design, Characterization, and Evaluation of Meloxicam Gel Prepared by Suspension and Solution Polymerization Using Solubility Parameter as the Basis for Development
Design and Synthesis of Mixed Valent Coordination Networks Containing Pyridine Appended Terpyridyl, Halide, and Dicarboxylates
Design of a hybrid polygeneration system with solar collectors and a Solid Oxide Fuel Cell: Dynamic simulation and economic assessment
Design and comparative study of online kernel methods identification of nonlinear system in RKHS space
Design of an Assembly of Poly(benzimidazole), Carbon Nanotubes, and Pt Nanoparticles for a Fuel-Cell Electrocatalyst with an Ideal Interfacial Nanostructure
Design of an assembly of pyridine-containing polybenzimidazole, carbon nanotubes and Pt nanoparticles for a fuel cell electrocatalyst with a high electrochemically active surface area
Designing of epoxy composites reinforced with carbon nanotubes grown carbon fiber fabric for improved electromagnetic interference shielding
Designing of multiwalled carbon nanotubes reinforced low density polyethylene nanocomposites for suppression of electromagnetic radiation
Design of 1x2 wavelength demultiplexer based on multimode interference
Design, Selection, and Characterization of Thioflavin-Based Intercalation Compounds with Metal Chelating Properties for Application in Alzheimer's Disease
Designing Temperature-Responsive Biocompatible Copolymers and Hydrogels Based on 2-Hydroxyethyl(meth)acrylates
Design of terahertz-bandwidth arbitrary-order temporal differentiators based on long-period fiber gratings
Designing nickel phthalocyanine periphery by alkyl chain via [1,3,4]-oxadiazole
Designer enediynes generate DNA breaks, interstrand cross-links, or both, with concomitant changes in the regulation of DNA damage responses
Design of wideband single-polarization single-mode photonic crystal fiber
Design and synthesis of a second series of triazole-based compounds as potent dual mPGES-1 and 5-lipoxygenase inhibitors
Design and synthesis of ruthenium oligothienylacetylide complexes. New materials for acoustically induced nonlinear optics
Designing photonic band gaps in SiO2-based face-centered cubic-structured crystals
Designing an accurate hand biometric based authentication system fusing finger knuckleprint and palmprint
Design of novel visible light responding semiconductor photocatalysts
Design and synthesis of a tag-free chemical probe for Photoaffinity Labeling
Designing synthetic vesicles that engulf nanoscopic particles
Design of coupling for synchronization in time-delayed systems
Design, synthesis, and structural aspects of chalcogen-substituted pyridine dicarboxamide donors and their reactions
Design, Synthesis, and Biological Evaluation of (S)-Valine Thiazole-Derived Cyclic and Noncyclic Peptidomimetic Oligomers as Modulators of Human P-Glycoprotein (ABCB1)
Design and Synthesis of Network-Forming Triblock Copolymers Using Tapered Block Interfaces
Design Rules for High-Efficiency Quantum-Dot-Sensitized Solar Cells: A Multilayer Approach
Design of an enhanced adaptive self-organizing fuzzy sliding-mode controller for robotic systems
Design and Implementation of a New Six-DOF Maglev Positioner With a Fluid Bearing
Design, fabrication, and packaging of a practical multianalyte-capable optical biosensor
Design and synthesis of fluorescent 6-aryl[1,2-c]quinazolines serving as selective and sensitive %26apos;on-off%26apos; chemosensor for Hg2+ in aqueous media
Designing an extended release waxy matrix tablet containing nicardipine-hydroxy propyl beta cyclodextrin complex
Design, synthesis, and biological activity of a potent Smac mimetic that sensitizes cancer cells to apoptosis by antagonizing IAPs
Designing a flood forecasting and inundation-mapping system integrated with spatial data infrastructures for Turkey
Design, formulation, in vitro, in vivo, and pharmacokinetic evaluation of nisoldipine-loaded self-nanoemulsifying drug delivery system
Designing biorelevant dissolution tests for lipid formulations: Case example - Lipid suspension of RZ-50
Design and Evaluation of a Backhaul-Aware Base Station Assignment Algorithm for OFDMA-Based Cellular Networks
Design, Synthesis and Characterisation of Guanosine-Based Amphiphiles
Designed Compounds for Recognition of 10 Base Pairs of DNA with Two AT Binding Sites
Design and synthesis of cyclopeptide analogues of the potent histone deacetylase inhibitor FR235222
Design and operation of a double-fiber scanning system for surface profiling
Design and operation of a double-fiber displacement sensor
Design, synthesis and biological evaluation of non-azole inhibitors of lanosterol 14 alpha-demethylase of fungi
Design, synthesis, and antifungal activities in vitro of novel tetrahydroisoquinoline compounds based on the structure of lanosterol 14 alpha-demethylase (CYP51) of fungi
Designing the molecular future
Design and structural analysis of metallamacrocycles based on a combination of ethylene glycol bearing pyridine units with zinc, cobalt and mercury
Design of a plasmonic optical sensor probe for humidity-monitoring
Design and development of novel insect growth regulators: Synthesis, characterization and effect of benzoyl thymyl thioureas and ureas on total haemocyte count of Dysdercus koenigii
Design of a terminal solution for integration of in-home health care devices and services towards the Internet-of-Things
Design, construction, and characterization of a second-generation DARPin library with reduced hydrophobicity
Design of Novel Interval Type-2 Fuzzy Controllers for Modular and Reconfigurable Robots: Theory and Experiments
Design, Fabrication, and Characterization of Flip-Chip Bonded Microinductors
Design and Fabrication of VHF Tapped Power Inductors Using Nanogranular Magnetic Films
Design and refinement of rare earth doped multicore fiber lasers
Design and test of a passive planar labyrinth micromixer for rapid fluid mixing
Design of integrated multimedia compression and encryption systems
Design and expression of a synthetic phyC gene encoding the neutral phytase in Pichia pastoris
Design of high-bandwidth one- and two-dimensional photonic bandgap dielectric structures at grazing incidence of light
Design of High Sensitive Pressure and Temperature Sensor Using Photonic Crystal Fiber for Downhole Application
Design for a BlackLight Power multi-cell thermally coupled reactor based on hydrogen catalyst systems
Design of tungsten complex gratings for thermophotovoltaic radiators
Design, asymmetric synthesis, and evaluation of pseudosymmetric sulfoximine inhibitors against HIV-1 protease
Design of a fully digital controller for a shunt three-phase active filter using VHDL-AMS language
Design of an Analog Quasi-Steady-State Nonlinear Current-Mode Controller for Single-Phase Active Power Filter
Design and evaluation of a slave manipulator with roll-pitch-roll wrist and automatic tool loading mechanism in telerobotic surgery
Design and kinematic characterization of a surgical manipulator with a focus on treating osteolysis
Desirability-based multiobjective optimization for global QSAR studies: Application to the design of novel NSAIDs with improved analgesic, antiinflammatory, and ulcerogenic profiles
Desirability-Based Methods of Multiobjective Optimization and Ranking for Global QSAR Studies. Filtering Safe and Potent Drug Candidates from Combinatorial Libraries
Designing the width and texture of vanadium oxide macroscopic fibers: Towards tuning mechanical properties and alcohol-sensing performance
Design of XNBR Nanocomposites for Underwater Acoustic Sensor Applications: Effect of MWNT on Dynamic Mechanical Properties and Morphology
Design of New 'DalPhos' P,N-Ligands: Applications in Transition-Metal Catalysis
Design of Compact and High Directive Slot Antennas Using Grounded Metamaterial Slab
Design Optimization of PID Controller in Automatic Voltage Regulator System Using Taguchi Combined Genetic Algorithm Method
Design, Synthesis and Cytotoxicity of Novel Chalcone Analogs Derived from 1-Cyclohexylpyrrolidin-2-one and 2,3-Dihydrobenzo[f]chromen-1-one
Design and Synthesis of Aminostilbene-Arylpropenones as Tubulin Polymerization Inhibitors
Design of a large effective mode area photonic crystal fiber with modified rings
Design and fabrication of diffusive solar cell window
Design and evaluation of extensions to UML sequence diagrams for modeling multithreaded interactions
Design, synthesis and redox properties of a fluorene platform linking two different Bodipy dyes
Designed self-assembled hybrid Au@CdS core-shell nanoparticles with negative charge and their application as highly selective biosensors
Design, Synthesis, and Biological Evaluation of Artemisinin-Indoloquinoline Hybrids as Potent Antiproliferative Agents
Design of High-Performing Microstrip Receiving GPS Antennas With Multiple Feeds
Design and microfabrication of a high-aspect-ratio PDMS microbeam array for parallel nanonewton force measurement and protein printing
Design of a passive two dash-pot damping system for spatial cable vibrations
Designing a collaborative supply-chain plan using the analytic hierarchy process and genetic algorithm with cycle-time estimation
Designing novel building blocks is an overlooked strategy to improve compound quality
Designing a tubular matrix of oriented collagen fibrils for tissue engineering
Design and development of a refrigeration system energized with hydrogen produced from scrap aluminum
Design strategies for the geometric synthesis of Orthoglide-type mechanisms
Designed RNAs with Two Peptide-Binding Units as Artificial Templates for Native Chemical Ligation of RNA-Binding Peptides
Designing and using RNA scaffolds to assemble proteins in vivo
Designing a better theranostic nanocarrier for cancer applications
Design, synthesis, and microbiological evaluation of new Candida albicans CYP51 inhibitors
Designing model systems for enhanced adhesion
Design and syntheses of blue luminescent zinc(II) and cadmium(II) complexes with bidentate or tridentate pyridyl-imidazole ligands
Designing (X)over-bar charts for known autocorrelations and unknown marginal distribution
Design of transverse electric ring isolators for ultra-low-loss Si3N4 waveguides based on the finite element method
Design of Low-Pass Finite Impulse Response Pulse-Shaping Filter Using a Novel Self-Adaptive Differential Evolution Technique
Design of Synchronous Reluctance Motors With Multiobjective Optimization Algorithms
Design, synthesis, in vitro antimicrobial and cytotoxic evaluation of novel 1,2,3-selena/thiadiazolyltetrazole derivatives
Design of a magnetic bistability molecular system constructed by H-bonding and pi center dot center dot center dot pi-stacking interactions
Design and synthesis of beta-methoxyacrylate analogues via click chemistry and biological evaluations
Design, synthesis and the effect of 1,2,3-triazole sialylmimetic neoglycoconjugates on Trypanosoma cruzi and its cell surface trans-sialidase
Design, development, and performance evaluation of a compact and long-range passive UHF RFID tag
Design and Analysis of a Multiport Circuit for Shaping Sub-Nanosecond Pulses
Design and optimization of microring resonators in biochemical sensing applications
Design, synthesis, and cyclization of 4-aminobutyric acid derivatives: potential candidates as self-immolative spacers
Design and development of three-dimensional scaffolds for tissue engineering
Design, construction, and preliminary results of a 250-kW organic Rankine cycle system
Design, fabrication, characterisation and application of nanoelectrode arrays
Design of Honeycomb Mesostructures for Crushing Energy Absorption
Design and application of new 16S rRNA-targeted oligonucleotide probes for the Azospirillum-Skermanella-Rhodocista-cluster
Design of Short Microstrip Leaky-Wave Antenna With Suppressed Back Lobe and Increased Frequency Scanning Region
Design and development of imprinted polymer inclusion membrane-based field monitoring device for trace determination of phorate (O,O-diethyl S-ethyl thiomethyl phophorodithioate) in natural waters
Design and Application of Intelligent Control Schemes for the Performance Enhancement of a Web Server
Design, synthesis and characterization of "clickable'' 4-anilinoquinazoline kinase inhibitors
Design of block ciphers by simple chaotic functions
Design and analysis of a novel chaotic diagonal recurrent neural network
Design, Synthesis, and Characterization of New 5-Fluorocytosine Salts
Design of sliding mode controller for Lorenz chaotic system with nonlinear input
Design of steroid-based imidazolium receptors for fluoride ion recognition
Designing index of void structure and tensile modulus in wet-spun poly(acrylonitrile) proto-fibres. Part II: Synergistic effect of dope non-solvent concentration and jet draw ratio
Design of highly synchronizable and robust networks
Design of a thin film for optical applications, consisting of high and low refractive index multilayers, fabricated by a layer-by-layer self-assembly method
Design and application of self-assembled low molecular weight hydrogels
Design, synthesis and biological evaluation of imidazo[1,5-a]pyridine-PBD conjugates as potential DNA-directed alkylating agents
Design and synthesis of novel chiral dendritic species derived from bile acids
Design of a spherical focal surface using close-packed relay optics
Design and synthesis of biotin- or alkyne-conjugated photoaffinity probes for studying the target molecules of PD 404182
Design of marine protected areas in a human-dominated seascape
Design and Photonic Properties of Novel Fluorinated Copolymers Bearing Phthalocyanine Side Groups
Desiccation induced oxidative stress and its biochemical responses in intertidal red alga Gracilaria corticata (Gracilariales, Rhodophyta)
Design and Optimization of High-Q Surface Mode Cavities on Patterned Metallic Surfaces
Design of reconfigurable antennas based on an L-shaped slot and PIN diodes for compact wireless devices
Design and characterization of taper coupler for effective laser and single-mode fiber coupling with large tolerance
Design of pitch conversion component for formation of multibeam optical recording head
Design of Improved-Reliability Nanocircuits with Mixed NBTI- and HCI-Aware Gate-Sizing Formulation
Designing Polyaniline (PANI) and Polyvinyl Alcohol (PVA) Based Electrically Conductive Nanocomposites: Preparation, Characterization and Blood Compatible Study
Design of functional metalloproteins
Desilication and silylation of Mo/HZSM-5 for methane dehydroaromatization
Design Principles for Photovoltaic Devices Based on Si Nanowires with Axial or Radial p-n Junctions
Designing Vaccines Based on Biology of Human Dendritic Cell Subsets
Design and synthesis of magnetic structures
Design improvements and performance testing of a biomass gasifier based electric power generation system
Designing Cell-Compatible Hydrogels for Biomedical Applications
Design and fabrication of multi-layer antireflection coating for III-V solar cell
Design and characterization of microporous hyaluronic acid hydrogels for in vitro gene transfer to mMSCs
Design of planar steel frames using Teaching-Learning Based Optimization
Design of blue or yellow emitting devices controlled by the deposition process of a cationic iridium (III) complex
Design, synthesis, and evaluation of 1-(N-benzylamino)-2-phenyl-3(1H-1,2,4-triazol-1-yl)propan-2-ols as antifungal agents
Design and synthesis of 3-(azol-1-yl)phenylpropanes as microbicidal spermicides for prophylactic contraception
Design, synthesis, photophysical, and electrochemical properties of DCM-based conjugated polymers for light-emitting devices
Design and evaluation of succinylated soy protein tablets as delayed drug delivery systems
Design of a Flexible Cell-Based Assay for the Evaluation of Heat Shock Protein 70 Expression Modulators
Design of Dual-Band Bandpass Filter Using DGS With Controllable Second Passband
Design of Nanofibrous Scaffolds for Skeletal Muscle Regenerative Engineering
Designed self-assembled beta-sheet peptide fibrils as templates for silica nanotubes
Design of High Performance Dual Frequency Concentric Split Ring Square Element for Broadband Reflectarray Antenna
Design of Broadband Single Layer Printed Reflectarray Using Giuseppe Peano Fractal Ring
Design of realistic switches for coupling superconducting solid-state qubits
Designed Fabrication of Silica-Based Nanostructured Particle Systems for Nanomedicine Applications
Design of a Dinuclear Nickel(II) Bioinspired Hydrolase to Bind Covalently to Silica Surfaces: Synthesis, Magnetism, and Reactivity Studies
Design, synthesis, and aqueous aggregation behavior of nonionic single and multiple thermoresponsive polymers
Design strategies for engineering selectivity in bio-inspired heterogeneous catalysts
Design, Fabrication and Experimental Validation of a Novel Dry-Contact Sensor for Measuring Electroencephalography Signals without Skin Preparation
Design of Nanostructured Solar Cells Using Coupled Optical and Electrical Modeling
Design and synthesis of hydroxyapatite composites containing an mPEG-dendritic poly(L-lysine) star polycaprolactone
Design and Synthesis of Fluorescent Pilicides and Curlicides: Bioactive Tools to Study Bacterial Virulence Mechanisms
Design of Bio-inspired Flexible Wings for Flapping-Wing Micro-sized Air Vehicle Applications
Design and synthesis of a novel 5-(aminomethylene)thiazolidine-2,4-dione derivatives as potent hepatitis-B virus polymerase inhibitors
Design of a deuterium and tritium-ablator shock ignition target for the National Ignition Facility
Design and Synthesis of New Stable Fluorenyl-Based Radicals
Design of Experiments for Pulse Reverse Electrodeposition of Graphene Oxide toward Hydrogen Evolution Reaction
Design of apollonian gasket ultrawideband antenna with modified ground plane
Design of coplanar waveguide-feed pentagonal-cut ultra-wide bandwidth fractal antenna and its backscattering
Design of an ultra-wideband monopole antenna with WiMAX, C and wireless local area network band notches
Design study on a magnetic gravity compensator with unequal magnet arrays
Design and modeling of electrolyte pumping power reduction in redox flow cells
Design of a spiral silica photonic crystal fiber for nonlinear applications in visible region
Design of solid core photonic bandgap fibers for visible supercontinuum generation
Design of Scalable Java Communication Middleware for Multi-Core Systems
Design and Validation of Bicyclic Iminopyrimidinones As Beta Amyloid Cleaving Enzyme-1 (BACE1) Inhibitors: Conformational Constraint to Favor a Bioactive Conformation
Design of Glycopeptides Used to Investigate Class II MHC Binding and T-Cell Responses Associated with Autoimmune Arthritis
Design and characterization of alkoxy-wrapped push-pull porphyrins for dye-sensitized solar cells
Design of Multilayer Dual-Band BPF and Diplexer with Zeros Implantation Using Suspended Stripline
Design of Plasmonic Platforms for Selective Molecular Sensing Based on Surface-Enhanced Raman Spectroscopy
Design and preparation of spherical high voltage LiNi0.5Mn1.5O4 with a novel concentration-gradient shell for lithium ion batteries
Design of Robust and Reactive Nanoparticles with Atomic Precision: 13Ag-Ih and 12Ag-1X (X = Pd, Pt, Au, Ni, or Cu) Core-Shell Nanoparticles
Design studies on three-dimensional issues for liquid blanket systems in helical reactor FFHR
Design and Optimization of a Chronotherapeutic Dosage Form for Treatment of Nocturnal Acid Breakthrough
Design and Synthesis of Donor-Acceptor Stenhouse Adducts: A Visible Light Photoswitch Derived from Furfural
Design, Construction, and Characterization of High-Performance Membrane Fusion Devices with Target-Selectivity
Design of Medium Band Gap Ag-Bi-Nb-O and Ag-Bi-Ta-O Semiconductors for Driving Direct Water Splitting with Visible Light
Design of and Mechanistic Studies on a Biomimetic Iron-Imidazole Catalyst System for Epoxidation of Olefins with Hydrogen Peroxide
Design of a new magnetic refrigeration field source running with rotating bar-shaped magnets
Design and Strand Tests of a Fusion Cable Composed of Coated Conductor Tapes
Design of ternary Al-Sn-Fe alloy for fast on-board hydrogen production, and its application to PEM fuel cell
Designing of ligands for solvent extraction of Cs+ using molecular modeling approach
Design, synthesis and interaction with Cu2+ ions of ice templated composite hydrogels
Design and optimization of multi-component organic rankine cycle using liquefied natural gas cryogenic exergy
Design and Optimization of Colon-Targeted System of Theophylline for Chronotherapy of Nocturnal Asthma
Design of an adaptive-robust controller for a powder coating robot and its comparison with inverse dynamic approach
Designing band offset of a-SiO:H solar cells for very high open-circuit voltage (1.06V) by adjusting band gap of p-i-n junction
Design of Irregular Weighted Nonbinary Repeat-Accumulate Codes over GF(q) with q-ary Orthogonal Modulation Using a Gaussian Approximation
Design and synthesis of condensed thienocoumarins by Suzuki-Miyaura reaction/lactonization tandem protocol
Designing and Deconstructing the Fano Lineshape in Plasmonic Nanoclusters
Design and Performance of a Double-Layer Miniaturized-Element Frequency Selective Surface
Design and synthesis of fluorescent galactolipid probes
Design and simulation of a prototype of a small-scale solar CHP system based on evacuated flat-plate solar collectors and Organic Rankine Cycle
Designing nanomaterials with desired mechanical properties by constraining the evolution of their grain shapes
Design and performance of a fast thermal response miniature Chromium Potassium Alum (CPA) salt pill for use in a millikelvin cryocooler
Design and electrochemical characterization of ternary alloy electrocatalysts for oxygen reduction reaction
Designing granular layers for railway tracks using ray optimization algorithm
Design of chimeric expression elements that confer high-level gene activity in chromoplasts
Design of an a-Si:H Interface Circuit for Liquid Crystal Chemical and Biological Sensor Array
Design and Biological Evaluation of New Platinum(II) Complexes Bearing Ligands with DNA-Targeting Ability
Design of hollow and concrete filled steel and stainless steel tubular columns for transverse impact loads
Design and development of spaceborne scientific devices at the Institute of Experimental Physics SAS
Designed To Dissolve: Suppression of Colloidal Aggregation of Cu(I)-Selective Fluorescent Probes in Aqueous Buffer and In-Gel Detection of a Metallochaperone
Design considerations of a large-displacement multistable micro actuator with serially connected bistable elements
Designing clinical trials in canine spinal cord injury as a model to translate successful laboratory interventions into clinical practice
Designing copper-zirconium based nanowires for improving yield strength and plasticity by configuring surface atoms
Design Considerations for Developing Biodegradable and Bioabsorbable Magnesium Implants
Design and Verification of a Media Redundancy Management Driver for a CAN Star Topology
Design of a complex filter for depth of focus extension
Design, synthesis and structure-activity relationship of new HSL inhibitors guided by pharmacophore models
Designing High-Capacity, Lithium-Ion Cathodes Using X-ray Absorption Spectroscopy
Design of computer experiments: space filling and beyond
Design of suitable permutations for irregular turbo codes
Design, fabrication and characterisation of scaled and stacked layers planar metamaterial absorber
Design and fabrication of endoscope-type Compton camera
Design and Synthesis of a New Family of Fluorinated Liquid Crystals
Design and analysis of an acoustic demultiplexer exploiting negative density, negative bulk modulus and extra-ordinary transmission of membrane-based acoustic metamaterial
Design and Color Response of Colorimetric Multilumophore Oxygen Sensors
Designing mechano-responsive microcapsules that undergo self-propelled motion
Design and characteristics of a WEP test in a sounding-rocket payload
Design method for a reconfigurable CMOS LNA with input tuning and active balun
Design and optimization of a new control strategy in a parallel hybrid electric vehicle in order to improve fuel economy
Design, synthesis, and antitubercular evaluation of novel series of 3-benzofuran-5-aryl-1-pyrazolyl-pyridylmethanone and 3-benzofuran-5-aryl-1-pyrazolylcarbony1-4-oxo-naphthyridin analogs
Design, synthesis and evaluation of the inhibitory selectivity of novel trans-resveratrol analogues on human recombinant CYP1A1, CYP1A2 and CYP1B1
Design and FPGA implementation of a wireless hyperchaotic communication system for secure real-time image transmission
Design and structural regularities of zigzag-like supramolecular 1D assemblies of polyhalogenated 2,6-, 2,4-diaminopyridines and 18-crown-6
Design of zigzag-like supramolecular 1D assemblies of polyfluorinated meta-arylenediamines and 18-crown-6
Design and investigation of surface addressable photonic crystal cavity confined band edge modes for quantum photonic devices
Design and synthesis of a new thiophene based donor-acceptor type conjugated polymer with large third order nonlinear optical activity
Design, Fabrication and Simulation of Coplanar Microheater Using Nickel Alloy for Low Temperature Gas Sensing Application
Design objectives with non-zero prescribed support displacements
Design, synthesis, and QSAR study of novel 2-(2,3-dioxo-2,3-dihydro-1H-indol-1-yl)-N-phenylacetamide derivatives as cytotoxic agents
Design and characterization of bi-soft segmented polyurethane microparticles for biomedical application
Design and dynamic simulation of minimal metallo-proteins
Design of systems for hydrogen production based on the Cu-Cl thermochemical water decomposition cycle: Configurations and performance
Design and characterization of functionalized silica nanocontainers for self-healing materials
Design and Demonstration of an In-Plane Silicon-on-Insulator Optical MEMS Fabry-Perot-Based Accelerometer Integrated With Channel Waveguides
Design of the 10 m AEI prototype facility for interferometry studies
Design and Synthesis of Angularly Annulated Spirocyclics via Enyne Metathesis and the Diels-Alder Reaction as Key Steps
Design considerations in the use of interdigitated microsensor electrode arrays (IMEs) for impedimetric characterization of biomimetic hydrogels
Design of riparian buffer strips affects soil quality parameters
Design and Experiment of a New Maglev Design Using Zero-Field-Cooled YBCO Superconductors
Design tunable materials: Ferroelectric-antiferroelectric composite with core-shell structure
Design and Characterization of a Two-Stage Human Subject Exposure Chamber
Design, synthesis and SAR of indazole and benzoisoxazole containing 4-azetidinyl-1-aryl-cyclohexanes as CCR2 antagonists
Design Rules for Phase-Change Materials in Data Storage Applications
Design and experimental validation of novel optics-based autofocusing microscope
Design and experimental validation of novel enhanced-performance autofocusing microscope
Design of Patterned Surfaces with Selective Wetting Using Nanoimprint Lithography
Design and application of high-power cavity-backed helical antenna with unit ceramic radome
Design and Assembly Procedures for Large-Sized Biohybrid Scaffolds as Patches for Myocardial Infarct
Design of the Reduction of Events with Darbepoetin alfa in Heart Failure (RED-HF): a Phase III, anaemia correction, morbidity-mortality trial
Design of sterculia gum based double potential antidiarrheal drug delivery system
Designing Foldamer-Foldamer Interactions in Solution: The Roles of Helix Length and Terminus Functionality in Promoting the Self-Association of Aminoisobutyric Acid Oligomers
Design and implementation of a flexible beamline for fs electron diffraction experiments
Designing thin film materials - Ternary borides from first principles
Designed optimization of a single-step extraction of fucose-containing sulfated polysaccharides from Sargassum sp.
Design considerations and strategies for high-reliable STT-MRAM
Design and Development of Sensing RFID Tags on Flexible Foil Compatible With EPC Gen 2
Design and synthesis of estrogen receptor degradation inducer based on a protein knockdown strategy
Design induced plastic deformation in Zr-based bulk metallic glass
Design, Synthesis, and Organocatalytic Activity of N-Heterocyclic Carbenes Functionalized with Hydrogen-Bond Donors in Enantioselective Reactions of Homoenolates
Design Principles of a Universal Protein Degradation Machine
Design, modelling and simulation of a new nonlinear and full adaptive backstepping speed tracking controller for uncertain PMSM
Design of Fully Digital Controlled Shaped Beam Synthesis Using Differential Evolution Algorithm
Design of multi-band CPW-fed antenna for triple-frequency operation
Design of Flexible Free Standing Plasma Polymer-Based Films As Hosts for Enzyme Immobilization
Design of a compensation mechanism for an active cardiac stabilizer based on an assembly of planar compliant mechanisms
Design and optimization of a cavity-backed spiral antenna for use in 6-12 GHz band
Design, Fabrication and Characterization of a Low-Impedance 3D Electrode Array System for Neuro-Electrophysiology
Design Methodology of Bidirectional CLLC Resonant Converter for High-Frequency Isolation of DC Distribution Systems
Design, Synthesis, and Functionalization of Dimeric Peptides Targeting Chemokine Receptor CXCR4
Design Analysis of Miniature Quartz Resonator Using Two-Dimensional Finite Element Model
Designing process-specific catalysts for cleaner, more efficient processes
Design and implementation of fluidic micro-pulleys for flow control on centrifugal microfluidic platforms
Design of silica carrier for controlled release of molsidomine: Effect of preparation methods of silica matrixes and their composites with molsidomine on the drug release kinetics in vitro
Design of Ku-band reflectarray using hexagonal patch with crossed slots
Design and Optimization of a Single-Layer Planar Transmit-Receive Contoured Beam Reflectarray With Enhanced Performance
Design optimization of minimally invasive surgical robot
Designing Piezoelectric Films for Micro Electromechanical Systems
Design and validation of a diagnostic score for biliary atresia
Design of fractal-based CMOS bandpass filter for WirelessHD system
Designing interlayers to improve the mechanical reliability of transparent conductive oxide coatings on flexible substrates
Design of Deinococcus radiodurans Thioredoxin reductase with altered thioredoxin specificity using computational alanine mutagenesis
Design of an expert system for sorting pistachio nuts through decision tree and fuzzy logic classifier
Design and Synthesis of Pyridinylisoxazoles and Their Anticancer Activities
Design of a sampling strategy to optimally calibrate a reactive transport model: Exploring the potential for Escherichia coli in the Scheldt Estuary
Designing an effective trap cropping strategy: the effects of attraction, retention and plant spatial distribution
Design, synthesis, magnetic properties of a pi-radical ligand with photo-excited high-spin state and its Fe(II) complex. The first stage of a new strategy for LIESST materials
Designing Durable Vapor-Deposited Surfaces for Reduced Hydrate Adhesion
Design of Improved Metal-Organic Framework (MOF) H-2 Adsorbents
Design of a Core Classification Process for DNA Mismatch Repair Variations of A Priori Unknown Functional Significance
Design and Analysis of a Delay Sensor Applicable to Process/Environmental Variations and Aging Measurements
Design of a lattice-matched III-V-N/Si photovoltaic tandem cell monolithically integrated on silicon substrate
Design strategies for mitigating the influence of polarization effects on GaN-based multiple quantum well light-emitting diodes
Design for ultrahigh-Q position-controlled nanocavities of single semiconductor nanowires in two-dimensional photonic crystals
Designing interfaces of hydrogenase-nanomaterial hybrids for efficient solar conversion
Design and Experiments of the 600 kV Coaxial-Type Matched Divider for High-Power Microwave Source Array
Design of Wideband LNAs Using Parallel-to-Series Resonant Matching Network Between Common-Gate and Common-Source Stages
Designable Biointerfaces Using Vapor-Based Reactive Polymers
Designing policies to mitigate the agricultural contribution to climate change: an assessment of soil based carbon sequestration and its ancillary effects
Design of chitosan/PSf self-assembly membrane to mitigate fouling and enhance performance in trypsin separation
Design of fine particles for pulmonary drug delivery
Design of Experiments-Based Monitoring of Critical Quality Attributes for the Spray-Drying Process of Insulin by NIR Spectroscopy
Design of a low power optical limiter based on a new nanocomposite material incorporating silica-encapsulated phthalocyanine in Nafion
Design of Millimeter-wave Rectangular Waveguide to HMSIW Transition Based on Trapezoidal-shaped Probe
Design and simulation of modular 2(n) to 1 quantum-dot cellular automata (QCA) multiplexers
Design and implementation of Multistage Interconnection Networks using Quantum-dot Cellular Automata
Design variable tolerance effects on the natural frequency variance of constrained multi-body systems in dynamic equilibrium
Design, construction, operation and performance of a Hadron Blind Detector for the PHENIX experiment
Design of low peak-to-average power ratio transceiver with enhanced link quality for coded single-carrier frequency division multiple access system
Design of optimum component test plans in the demonstration of diverse system performance measures
Design of progressively censored group sampling plans for Weibull distributions: An optimization problem
Design methodology for efficient frequency conversion in Bragg reflection lasers
Design and validation of a reconfiguration strategy for a redundantly actuated intelligent autonomous vehicle
Design of bioreactors for mesenchymal stem cell tissue engineering
Design of Mononuclear Ruthenium Catalysts for Low-Overpotential Water Oxidation
Design and Implementation of a Direct AC-DC Boost Converter for Low-Voltage Energy Harvesting
Designing persuasive destination websites: A mental imagery processing perspective
Design of a dual-band microstrip antenna using particle swarm optimization with curve fitting
Designed guanidinium-rich amphipathic oligocarbonate molecular transporters complex, deliver and release siRNA in cells
Design, synthesis, and solution behaviour of small polyamines as switchable water additives
Design of the drop-off-pick-up zones in buildings: the case of private transportation at the female university of Riyadh
Designing synthetic materials to control stem cell phenotype
Designing new ligands: asymmetric cyclopropanation by Cu(I) complexes based on functionalised pyridine-containing macrocyclic ligands
Designing and evaluating patterns for relation acquisition from texts with CAMELEON
Design and optimization of isolated energy systems through pinch analysis
Design Considerations of Permanent Magnet Transverse Flux Machines
Design of a full-band CMOS UWB receiver and fast-hopping carrier generator for 3.1-10.6 GHz
Design of an Axial Flux Permanent Magnet Generator for a Portable Hand Crank Generating System
Design optimisation of an axial flux-switching hybrid excitation synchronous machine at no-load
Design of borehole heat exchangers for ground-source heat pumps: A literature review, methodology comparison and analysis on the penalty temperature
Design of a 7m Davies-Cotton Cherenkov telescope mount for the high energy section of the Cherenkov Telescope Array
Design and synthesis of an inositol phosphate analog based on computational docking studies
Design, Synthesis, Evaluation, and Structure of Vitamin D Analogues with Furan Side Chains
Designs for Collective Cognitive Responsibility in Knowledge-Building Communities
Design equations for reinforced concrete members strengthened in shear with external FRP reinforcement formulated in an evolutionary multi-objective framework
Design of Optimal Linear Precoder and Decoder for MIMO Channels with Per Antenna Power Constraint and Imperfect CSI
Design, synthesis and characterization of a modular bridging ligand platform for bio-inspired hydrogen production
Design of a H-2/O-2 biofuel cell based on thermostable enzymes
Design and optimization of an intumescent flame retardant coating using thermal degradation kinetics and Taguchi%26apos;s experimental design
Design criteria for bi-stable behavior in a buckled multi-layered MEMS bridge
Design and construction recommendations to improve impermeability in rainscreen walls built with natural stone coverings
Design of steady-state isothermal gas distribution systems consisting of long tubes in the whole range of the Knudsen number
Design for mass customization: Product variety vs. process variety
Design and Application of New Imidazolylsulfonate-Based Benzyne Precursor: An Efficient Triflate Alternative
Design and implementation of a switched capacitor-based embedded hybrid DC-DC converter
Design and Analysis of Dual-Mode Digital-Control Step-Up Switched-Capacitor Power Converter With Pulse-Skipping and Numerically Controlled Oscillator-Based Frequency Modulation
Design, fabrication, and properties of 2-2 connectivity cement/polymer based piezoelectric composites with varied piezoelectric phase distribution
Design of a Compact Microstrip Quint-Band Filter Based on the Tri-Mode Stub-Loaded Stepped-Impedance Resonators
Design, Synthesis, and Biological Evaluation of Novel Fluorinated Ethanolamines
Design of optimal Active Queue Management controllers for HSTCP in large bandwidth-delay product networks
Design of Compact Quadruplexer Based on the Tri-Mode Net-Type Resonators
Design of Broadband Highly Efficient Harmonic-Tuned Power Amplifier Using In-Band Continuous Class(-1)/F Mode Transferring
Design of Monolithic CMOS LDO Regulator With D-2 Coupling and Adaptive Transmission Control for Adaptive Wireless Powered Bio-Implants
Design methodology for compact photonic-crystal-based wavelength division multiplexers
Design it yourself (DIY): in-house instructional design for online pharmacology
Design, fabrication and characterization of a conducting PDMS for microheaters and temperature sensors
Design and experimental verification of a high efficiency small wind energy portable turbine (SWEPT)
Design of biocompatible surface-modified polyurethane and polyurea nanoparticles
Design of a Contactless Energy-Transfer System for Desktop Peripherals
Design of a preliminary error impact analysis model for spatial safety assessment of earthmoving operations
Designing Chip-Level Nanophotonic Interconnection Networks
Design and Redox Function of Conjugated Complexes with Polyanilines or Quinonediimines
Design and preparation of neutral substituted fluorene- and carbazole-based platinum(II) - acetylide complexes
Design and Evaluation of CRDMAC: Circular RTR Directional MAC Protocol for WANETs
Design and Synthesis of a Series of Truncated Neplanocin Fleximers
Design of a hybrid electric fuel cell power train for an urban bus
Design of a Charge Equalizer Based on Battery Modularization
Design of an omnidirectional mirror using one dimensional photonic crystal with graded geometric layers thicknesses
Designing a Robust Activity Recognition Framework for Health and Exergaming Using Wearable Sensors
Design, fabrication, and metrology of ultra-precision optical freeform surface for progressive addition lens with B-spline description
Design of a low-power micromachined fluxgate sensor using localized core saturation method
Design of input vector for day-ahead price forecasting of electricity markets
Design of ring resonator based all optical switch for logic and arithmetic operations - A theoretical study
Design of Reconfigurable and Robust Integrated SC Power Converter for Self-Powered Energy-Efficient Devices
Design of differential evolution algorithm-based robust fuzzy logic power system stabiliser using minimum rule base
Design of the muscles in motion study: a randomized controlled trial to evaluate the efficacy and feasibility of an individually tailored home-based exercise training program for children and adolescents with juvenile dermatomyositis
Design and Analysis of Backoff Algorithms for Random Access Channels in UMTS-LTE and IEEE 802.16 Systems
Design and Development of X-band Planar Balun on Silicon
Designing oral participation in Second Life - a comparative study of two language proficiency courses
Designing a Novel Adaptive Impulsive Observer for Nonlinear Continuous Systems Using LMIs
Design and Analysis of Magnetic-Geared Motor With Field Windings
Designing educational software with students through collaborative design games: The We!Design&Play framework
Design of fashioning lines in 3D knitted fabrics
Designing an Underground Car Park Fire Scenarios on a Probabilistic Basis
Design and Baseline Characteristics of Participants in a Phase III Randomized Trial of Celecoxib and Selenium for Colorectal Adenoma Prevention
Design of a deburring tool for intersecting holes in aluminum alloys
Design of the Nanocrystalline CdS@TiO2 Photocatalyst
Design, synthesis, and biological activity of unnatural enediynes and related analogues equipped with pH-Dependent or phototriggering devices
Design and synthesis of marine natural product-based 1H-indole-2,3-dione scaffold as a new antifouling/antibacterial agent against fouling bacteria
Design, Synthesis, and Characterization of a Partially Chlorinated Acrylic Copolymer for Low-Loss and Thermally Stable Graded Index Plastic Optical Fibers
Desired privacy and the impact of crowding on customer emotions and approach-avoidance responses Waiting in a virtual reality restaurant
Design strategy for low-energy ventilation and cooling of hospitals
Designing Secure Data Warehouses by Using MDA and QVT
Design and Implementation of Simple Field-Oriented Control for Permanent Magnet Stepper Motors Without DQ Transformation
Designing optimal controllers for nonlinear frames by considering the effect of response feedback
Design of OMC-MAC: An Opportunistic Multi-Channel MAC with QoS Provisioning for Distributed Cognitive Radio Networks
Design and Analysis of Transmission Strategies in Channel-Hopping Cognitive Radio Networks
Design and Implementation of an Underlay Control Channel for Cognitive Radios
Design of solar pond for water preheating used in the copper cathodes washing at a mining operation at Sierra Gorda, Chile
Design of Robust D-Stable IIR Filters Using Genetic Algorithms With Embedded Stability Criterion
Design of IIR filters using a pole-zero mapping approach
Design of MIMO Antennas for Indoor Base Station and Mobile Terminal
Design and implementation of a real time and train less eye state recognition system
Design of the multi-objective constrained nonlinear robust excitation controller with extended Kalman filter estimates of all state variables
Design Synthesis of Electromagnetic Vibration-Driven Energy Generators Using a Variational Formulation
Design of High Performance Permanent-Magnet Synchronous Wind Generators
Design and fabrication of biphasic cellular materials with transport properties - A modified bidirectional evolutionary structural optimization procedure and MATLAB program
Design and Analysis of Novel Linearization Technique of Cascode Cell in a 60-GHz CMOS Demodulator
Design a personalized e-learning system based on item response theory and artificial neural network approach
Design of a non-linear power system stabiliser using the concept of the feedback linearisation based on the back-stepping technique
Designing standalone hybrid energy systems minimizing initial investment, life cycle cost and pollutant emission
Designing simulator-based training: An approach integrating cognitive task analysis and four-component instructional design
Design of conformal, substrate-independent surface modification for controlled protein adsorption by chemical vapor deposition (CVD)
Designing supply contracts in supplier vs buyer-driven channels: The impact of leadership, contract flexibility and information asymmetry
Design method of fir digital filters with specified group delay errors using successive projection
Design of Second Order Digital FIR Full-Band Differentiators Using Weighting Coefficients
Design and analysis of nano-deep corrugated waveguide grating-based dual-resonant filters in visible and infra-red regions
Design and simulation of wavelength demultiplexer based on heterostructure photonic crystals ring resonators
Design and analysis of an all-optical Demultiplexer based on photonic crystals
Design of an in-house ambient pressure AP-XPS using a bench-top X-ray source and the surface chemistry of ceria under reaction conditions
Designing a knowledge-based system for strategic planning: A balanced scorecard perspective
Designing a knowledge-based system for benchmarking: A DEA approach
Design and Implementation of a Fast Dynamic Packet Filter
Designing and conducting a randomized trial for pandemic critical illness: the 2009 H1N1 influenza pandemic
Design and Analysis of a Robust Broadcast Scheme for VANET Safety-Related Services
Design and Implementation of a Fuzzy-Modified Ant Colony Hardware Structure for Image Retrieval
Designing supply chains with sustainability considerations
Design and analysis of a closed-loop supply chain in presence of promotional offer
Designing neutral metallophilic hydrogels from di- and tripeptides
Design and fabrication of a new nonwoven-textile based platform for biosensor construction
Design and Modeling of a Patterned-Electret-Based Energy Harvester for Tire Pressure Monitoring Systems
Designing 2-aminoimidazole alkaloids analogs with anti-biofilm activities: Structure-activities relationships of polysubstituted triazoles
Design considerations in an active medical product safety monitoring system
Design Methodology for Dual-Band Doherty Power Amplifier With Performance Enhancement Using Dual-Band Offset Lines
Design of a Non-Foster Actively Loaded SRR and Application in Metamaterial-Inspired Components
Design of a two-stage fuzzy classification model
Design and Fabrication of End Platens for Acquisition of Small-Strain Piezoelectric Measurements During Large-Strain Triaxial Extension and Triaxial Compression Testing
Design and analysis of a photonic crystal fiber with four-hole unit
Design of agile supply chain assessment model and its case study in an Indian automotive components manufacturing organization
Design and dynamic simulation of a novel solar trigeneration system based on hybrid photovoltaic/thermal collectors (PVT)
Design and modelling of a new patented thermal solar collector with high building integration
Design of a Polarization-Maintaining Equiangular Spiral Photonic Crystal Fiber for Residual Dispersion Compensation Over E plus S plus C plus L plus U Wavelength Bands
Design, synthesis and antiproliferative activity of styryl lactones related to (+)-goniofufurone
Design of new coatings using magnetron sputtering - numerical estimations
Design of low-pass filters using some defected ground structures
Designing high-performance electrochemical energy-storage nanoarchitectures to balance rate and capacity
Designing virtual worlds to facilitate meaningful communication: Issues, considerations, and lessons learned
Designing Ranking Systems for Hotels on Travel Search Engines by Mining User-Generated and Crowdsourced Content
Design and Development of a Novel Supportive Care Product for the Treatment of Sialorrhea in Parkinson's Disease
Design of Dual-Band Coupler With Arbitrary Power Division Ratios and Phase Differences
Design of an ultrathin broadband transparent and high-conductive screen using plasmonic nanostructures
Designing photonic structures of nanosphere arrays on reflectors for total absorption
Design of a continuous-flow reactor for in situ x-ray absorption spectroscopy of solids in supercritical fluids
Design of a Highly Effective Therapeutic HPV16 E6/E7-Specific DNA Vaccine: Optimization by Different Ways of Sequence Rearrangements (Shuffling)
Design and measurements of a broadband two-dimensional acoustic metamaterial with anisotropic effective mass density
Designing drugs that combat kidney damage
Design and development of a peptide-based adiponectin receptor agonist for cancer treatment
Design of copper/carbon-coated fiber Bragg grating acoustic sensor net for integrated health monitoring of nuclear power plant
Design and performance analysis on adaptive reservation-assisted collision resolution protocol for WLANs
Design of a service platform for delay-sensitive video streaming applications based on multicast p2p and scalable MDC encoding
Design of a decision support methodology using response surface for torque comparison: An empirical study on an engine fueled with waste plastic pyrolysis oil
Design and Simulation of Efficient Code Converter Circuits for Quantum-Dot Cellular Automata
Design of Cobalt Nanoparticles with Tailored Structural and Morphological Properties via O/W and W/O Microemulsions and Their Deposition onto Silica
Design and analysis of a low-profile directive antenna array for multi-element terminals
Design of molecularly imprinted TiO2/carbon aerogel electrode for the photoelectrochemical determination of atrazine
Design of PZT-Pt functionally graded piezoelectric material for low-frequency actuation applications
Design, construction and validation of a nose-only inhalation exposure system to measure infectivity of filtered bioaerosols in mice
Design of Buckling-Restrained Braced Frames Using Nonlinear Time History Analysis and Optimization
Design Error Costs in Construction Projects
Design of a Compliant Endoscopic Suturing Instrument
Design and reconfiguration models for dynamic cellular manufacturing to handle market changes
Designing an Anti-swindle Mahjong Leisure Prototype System using RFID and ontology theory
Design and implementation of RFID based air-cargo monitoring system
Design of a Covert RFID Tag Network for Target Discovery and Target Information Routing
Design of coolers for use in an existing cooling water network
Design of external forces for eliminating traveling wave in a piecewise linear FitzHugh-Nagumo model
Design and implementation of a 0.8 V input, 84% duty cycle, variable frequency step-up converter
Designing sustainable and economically attractive brownfield revitalization options using an integrated assessment model
Designing recombinant vaccines with viral properties: A rational approach to more effective vaccines
Design of an Evolutionary Approach for Intrusion Detection
Design and simulation of a new powered gait orthosis for paraplegic patients
Designing an ergonomics backpack for student aged 7-9 with user centred design approach
Design and one-pot synthesis of hybrid thiazolidin-4-one-1,3,5-triazines as potent antibacterial agents against human disease-causing pathogens
Design considerations on the proof of efficacy of functional foods
Designer stories: a commentary on the community of design practice
Design and Analysis of Diabetes Prevention Trials for Glucose-Lowering Drugs
Design and validation of a homogeneous time-resolved fluorescence-based leptin receptor binding assay
Designing first-in-human dose of coagulation factors: application of pharmacokinetic allometric scaling
Design strategies and rigorous conditions for single-polarization single-mode waveguides
Design and Analysis of Digital-Assisted Bandwidth-Enhanced Miller Divider in 0.18-mu m CMOS Process
Design and implementation of an adaptive job allocation strategy for heterogeneous multi-cluster computing systems
Design and Development of Functionalized Cyclometalated Ruthenium Chromophores for Light-Harvesting Applications
Design of Single Degree-of-freedom Optimally Passive Vibration Isolation System
Design and evaluation of an arbitration-free passive optical crossbar for on-chip interconnection networks
Design and Analysis of Silicon Photonics Wave Guides Using Symbolic Methods
Design and baseline characteristics of a prospective cohort study for determinants of osteoporotic fracture in community-dwelling elderly Japanese men: the Fujiwara-kyo Osteoporosis Risk in Men (FORMEN) Study
Design of the output-capacitorless low-dropout regulator for nano-second transient response
Design of metamaterial surfaces with broadband absorbance
Design and performance evaluation of mobile web services in libraries A case study of the Oriental Institute of Technology Library
Design of the QoS framework for the IEEE 802.16 mesh networks
Design Strategies for Eddy-Current Displacement Sensor Systems: Review and Recommendations
Design of a retarding potential grid system for a neutral particle analyzer
Design and evaluation of Ubiquitous Information Systems and use in healthcare
Design of a Learning Cascade Controller for a Continuous Noninvasive Blood Pressure Measurement System
Design and Evaluation of Interactive Proofreading Tools for Connectomics
Desirable therapeutic characteristics of an optimal antihypertensive agent
Design and finite element analysis of a new structure brushless wound field synchronous motor
Design of self tuning fuzzy controllers for nonlinear systems
Design and synthesis of bistereogenic chiral ionic liquids and their use as solvents for asymmetric Baylis-Hillman reactions
Design Criteria for Ionic Liquid Crystalline Phases of Phosphonium Salts with Three Equivalent Long n-Alkyl Chains
Design for improved adhesion of fluorine-incorporated hydrogenated amorphous carbon on metallic stent: Three-layered structure with controlled surface free energy
Design features of some types of ultrawide-angle objectives
Design of Hydralazine Hydrochloride Matrix Tablets Based on Various Polymers and Lipids
Design rainfall estimation in Australia: a case study using L moments and Generalized Least Squares Regression
Desingularized meshless method for solving Laplace equation with over-specified boundary conditions using regularization techniques
Design and Analysis of UHF Micropower CMOS DTMOST Rectifiers
Design of Robust Broadband Beamformers With Discrete Coefficients and Least Squared Criterion
Design and experiments of a novel low-ripple Cockcroft-Walton AC-to-DC converter for a coil-coupled passive RFID tag
Design of waveguide grating with ultrafast tunable index contrast
Design and performance study of the ground-coupled heat pump system with an operating parameter
Design and analysis of a compact solar-driven constant-torque reaction steam turbine
Design of an efficient photocatalytic reactor for the decomposition of gaseous organic contaminants in air
Design and implementation of practical asset tracking system in container terminals
Designing for conservation of insects in the built environment
Design and Application of a Data-Independent Precursor and Product Ion Repository
Design Parameters of a Miniaturized Piezoelectric Underwater Acoustic Transmitter
Design and evaluation of a microprocessor course combining three cooperative methods: SDLA, PjBL and CnBL
Design of Chitosan and Its Water Soluble Derivatives-Based Drug Carriers with Polyelectrolyte Complexes
Design and Testing of a Semi-Continuous Measurement System for Ionic Species in PM2.5
Design of Voltage Tracking Control for DC-DC Boost Converter Via Total Sliding-Mode Technique
Design and Development of Feed-back Controller for a Boost Converter Using a Colony of Foraging Bees
Design of Frequency Invariant Beamformer Without Temporal Filtering
Design Your Own Job Through Job Crafting
Design of near-allpass strictly stable minimal-phase real.-valued rational IIR filters
Design and operation of the wide angular-range chopper spectrometer ARCS at the Spallation Neutron Source
Design of Non-aqueous Liquid Electrolytes for Rechargeable Li-O-2 Batteries
Design of a secure RFID authentication scheme preceding market transactions
Design and Fabrication of Soft Artificial Skin Using Embedded Microchannels and Liquid Conductors
Design and synthesis of 1-(2-alkanamidoethyl)-6-methoxy-7-azaindole derivatives as potent melatonin agonists
Designing acoustic transformation devices using fluid homogenization of an elastic substructure
Design of radial sonic crystal for sound attenuation from divergent sound source
Design of Duty-Varied Voltage Pulse Charger for Improving Li-Ion Battery-Charging Response
Design and simulation of electronic ballast performance for high pressure sodium street lighting
Design of a long range nano-scale resolution mechanism
Design of novel artemisinin-like derivatives with cytotoxic and anti-angiogenic properties
Designing fuzzy-genetic learner model based on multi-agent systems in supply chain management
Designing a mobile language learning system based on lightweight learning objects
Designer self-assembling peptide scaffolds for 3-D tissue cell cultures and regenerative medicine
Design and application of stimulus-responsive peptide systems
Designer Self-Assembling Peptide Nanofiber Scaffolds for Adult Mouse Neural Stem Cell 3-Dimensional Cultures
Design and Scale-Up of a Practical Enantioselective Route to 5-Phenylbicyclo[2.2.2]oct-5-en-2-one
Design guidelines for integrating amphibian habitat into golf course landscapes
Design, synthesis, and immunologic evaluation of vaccine adjuvant conjugates based on QS-21 and tucaresol
Design considerations for liposomal vaccines: Influence of formulation parameters on antibody and cell-mediated immune responses to liposome associated antigens
Design Procedure for a Longitudinal Flux Flat Linear Switched Reluctance Motor
Design and control of a linear propulsion system for an elevator using linear switched reluctance motor drives
Design of distributed microcell-based MMOG hosting platforms: impact study of dynamic relocations
Design of embedded DSP-based fuzzy controllers for autonomous mobile robots
Design of an advanced electric power distribution systems using seeker optimization algorithm
Design and free-space measurements of a simple electromagnetic cloak for conducting cylindrical objects
Design of a wavelength independent grating in the resonance domain
Design and Evaluation of a Robust Optical Beam-Interruption-Based Vehicle Classifier System
Design of graded two-phase microstructures for tailored elasticity gradients
Design of Coaxial Magnetic Gear for Improvement of Torque Characteristics
Design a pre-compensator to guarantee the finiteness of integral performance indices in fractional-order control systems
Design and development of a freeform active mirror for an astronomy application
Design Optimization of Heat Wheels for Energy Recovery in HVAC Systems
Design and optimization of a novel surface plasmon resonance biosensor based on Otto configuration
Design and Analysis of a K-Band Low-Phase-Noise Phase-Locked Loop With Subharmonically Injection-Locked Technique
Design of mid-infrared amplifiers based on fiber taper coupling to erbium-doped microspherical resonator
Design of Rare-Earth-Doped Microspheres
Design and Tuning of a Modified Power-Based PLL for Single-Phase Grid-Connected Power Conditioning Systems
Design and growth of metamorphic InAs/InGaAs quantum dots for single photon emission in the telecom window
Design Strategies for the Sequence-Based Mimicry of Side-Chain Display in Protein beta-Sheets by alpha/beta-Peptides
Design of novel microfluidic concentration gradient generators suitable for linear and exponential concentration ranges
Design of Hemispherical Radio Frequency (RF) Capacitive-type Electrode Free of Edge Effects for Treatment of Intracavitary Tumors
Design, Synthesis, and Applications of Potential Substitutes of t-BuPhosphinooxazoline in Pd-Catalyzed Asymmetric Transformations and Their Use for the Improvement of the Enantioselectivity in the Pd-Catalyzed Allylation Reaction of Fluorinated Allyl Enol Carbonates
Design of Small Antennas for Mobile Handsets Using Magneto-Dielectric Material
Design, Fabrication, and Measurement of a One-Dimensional Periodically Structured Surface Antenna
Designing and theorizing the adoption of mobile technology-mediated ethical consumption tools
Design and optimization of machining fixture layout using ANN and DOE
Designing the energy absorption capacity of functionally graded foam materials
Design and analysis of modified cylindrical gears with a higher-order transmission error
Design and Manufacture of Spiral Bevel Gears With Reduced Transmission Errors
Designing Time-Hopping Ultrawide Bandwidth Receivers for Multiuser Interference Environments
Design-Oriented Strength Model for FRP-Confined Concrete Members
Design principles for superamphiphobic surfaces
Design of All-Optical Reconfigurable Logic Unit With Bacteriorhodopsin Protein Coated Microcavity Switches
Design of Mid-IR Er3+-Doped Microsphere Laser
Design and Optimization of an Optofluidic Ring Resonator Based on Liquid-Core Hybrid ARROWs
Design and Synthesis of a (18)-Cyclodextrin Oligomer: A New Platform with Potential Application as a Dendrimeric Multicarrier
Design, synthesis and evaluation of dialkyl 4-(benzo[d][1,3]dioxol-6-yl)-1,4-dihydro-2,6-dimethyl-1-substituted pyridine-3,5-dicarboxylates as potential anticonvulsants and their molecular properties prediction
Design, Synthesis, Toxicity Estimation and Molecular Docking Studies of N-(furan-2-yl)-1-(5-substituted) phenyl-1,3,4-oxadiazol-2-yl) methanimine as Antitubercular Agents
Designable structures are easy to unfold
Design and characterization of a chimeric multiepitope construct containing CfaB, heat-stable toxoid, CssA, CssB, and heat-labile toxin subunit B of enterotoxigenic Escherichia coli: a bioinformatic approach
Designs for a Microfabricated Magnetic Sifter
Design of aerodynamic stabilizing cables for a cable-stayed bridge during construction
Design and formulation of mucoadhesive microspheres of sitagliptin
Design and fabrication of carbon fiber/carbonyl iron core-shell structure composites as high-performance microwave absorbers
Design of a 0.5 V op-amp based on CMOS inverter using floating voltage sources
Designing information fusion for the encoding of visual-spatial information
Design of M-channel cosine modulated filter bank using modified Exponential window
Design and development of low-power driven hybrid electroluminescent lamp from carbon nanotube embedded phosphor material
Design and modeling of 1-10 MWe liquefied natural gas-fueled combined cooling, heating and power plants for building applications
Design of Tunable Multicomponent Polymers as Modular Vehicles To Solubilize Highly Lipophilic Drugs
Design of a MIMO Antenna with Improved Isolation Using MNG Metamaterial
Design of free patterns of nanocrystals with ad hoc features via templated dewetting
Designing a PCM storage system using the effectiveness-number of transfer units method in low energy cooling of buildings
Design space representation of channel members for industrial applications
Design, Modeling, and Simulation of On-Demand Communication Mechanisms for Cyber-Physical Energy Systems
Design and synthesis of novel oxetane beta(3)-amino acids and alpha, beta-peptides
Design and synthesis of trans-3-aminopyran-2-carboxylic acid (APyC) and alpha/beta-peptides with 9/11-helix
Design and experimental analysis of an efficient HVAC (heating, ventilation, air-conditioning) system on an electric bus with dynamic on-road wireless charging
Design Customization of Respiratory Mask based on 3D Face Anthropometric Data
Design of a 2x2 tapered dielectric-loaded helical antenna array for INMARSAT-M satellite system
Design, assembly, and validation of a nose-only inhalation exposure system for studies of aerosolized viable influenza H5N1 virus in ferrets
Design of High-Order Wideband Planar Balun Filter in S-Plane Bandpass Prototype
Design Enhancement of Miniature Lumped-Element LTCC Bandpass Filters
Design of S-Band Erbium-Doped Concentric Dual-Core Photonic Crystal Fiber Amplifiers With ASE Suppression
Designing New Analogs for Streamlining the Structure of Cytotoxic Lamellarin Natural Products
Designing a Good Low-Rate Sparse-Graph Code
Design and Properties of Intermediate-Sized Narrow Band-Gap Conjugated Molecules Relevant to Solution-Processed Organic Solar Cells
Designed Autonomic Motion in Heterogeneous Belousov-Zhabotinsky (BZ)-Gelatin Composites by Synchronicity
Design, optimization and performance evaluation of a content distribution overlay for streaming
Designing the head group of CO2-triggered switchable surfactants
Designing Product Lists for E-commerce: The Effects of Sorting on Consumer Decision Making
Design of Star-Connected Autotransformer Based 24-Pulse Rectifier and Its Application in the More Electric Aircraft
Design of a Learning Companion Recommendation System Based on Learning Style on Facebook Using an Artificial Bee Colony Algorithm
Design of LDPC Codes Based on Progressive Edge Growth Techniques for Block Fading Channels
Design Preserving Garment Transfer
Design of organometallic group IV heteroallylic complexes and their catalytic properties for polymerizations and olefin centered transformations
Designing XML documents from conceptual schemas and workload information
Design of the standardizing care to improve outcomes in pediatric end stage renal disease collaborative
Design and testing of a propeller for a two-seater aircraft powered by fuel cells
Design of a new oligotriazole peptide nucleic acid analogue (oT-PNA)
Design and synthesis of bile acid-peptide conjugates linked via triazole moiety
Design, Fabrication, and Testing of a Capsule With Hybrid Locomotion for Gastrointestinal Tract Exploration
Design and synthesis of substituted morpholin/piperidin-1-ylcarbamodithioates as promising vaginal microbicides with spermicidal potential
Designing for reintermediation in the brick-and-mortar world: Towards the travel agency of the future
Design of distributed energy system through Electric System Cascade Analysis (ESCA)
Design of a compact UWB out-of-phase power divider
Design and Fabrication of Tubular Scaffolds via Direct Writing in a Melt Electrospinning Mode
Design and Stability Analysis of a Frequency Controlled Sliding-Mode Buck Converter
Designing a Site Electrical System With Arc Flash Energy Under 20 cal/cm(2)
Design of pixel electronics based on asynchronous self-reset approach with floating-point output representation for high dynamic range imagers
Design and Construction of a New Modified Screen-Printed Sensor for Voltammetric Determination of Molybdenum(VI) Ions
Designable dual-material auxetic metamaterials using three-dimensional printing
Desiccation-induced non-radiative dissipation in isolated green lichen algae
Design of Triple-Frequency Microstrip-Fed Monopole Antenna Using Defected Ground Structure
Design of robust control Lyapunov function for non-linear affine systems with uncertainty
Design of Gas-Phase Synthesis of Core-Shell Particles by Computational Fluid-Aerosol Dynamics
Design of Turbulent Flame Aerosol Reactors by Mixing-Limited Fluid Dynamics
Design of Rh@Ce0.2Zr0.8O2-Al2O3 nanocomposite for ethanol steam reforming
Design-grounded assessment: A framework and a case study of Web 2.0 practices in higher education
Design, Synthesis, and Herbicidal Activity of Novel Substituted 3-(Pyridin-2-yl)benzenesulfonamide Derivatives
Design of Highly Nonlinear Dispersion Flattened Hexagonal Photonic Crystal Fibers for Dental Optical Coherence Tomography Applications
Design of Linear Dispersion Codes for Practical MIMO-OFDM Systems
Designing UV/VIS/NIR-sensitive shape memory filament yarns
Design and Analysis of a Probability-based Data Forwarding Scheme in Wireless Sensor Networks
Design and Evaluation of CNFET-Based Quaternary Circuits
Design of a ternary static memory cell using carbon nanotube-based transistors
Design of Electrooptic Modulators Using a Multiobjective Optimization Approach
Design of a computer-generated hologram for obtaining a uniform hardened profile by laser transformation hardening with a high-power diode laser
Design and evaluation of analogues of the bacterial cell-wall peptidoglycan motif L-Lys-D-Ala-D-Ala for use in a vancomycin biosensor
Design and preliminary tests of a twin coil HTS SMES for pulse power operation
Design, fabrication and testing of a PMMA-based passive single-cell and a multi-cell stack micro-DMFC
Design, microfabrication and characterization of planarized multilayer atom chips with enhanced heat dissipation
Design of wideband microstrip antenna array at L-band for synthetic aperture radar applications
Design of resin composites with enhanced physical-mechanical properties
Design and production of sintered beta-tricalcium phosphate 3D scaffolds for bone tissue regeneration
Design of a decision support system for machine tool selection based on machine characteristics and performance tests
Design of Uniformly Most Powerful Alphabets for HDF 2-Way Relaying Employing Non-Linear Frequency Modulations
Design of Network Codes for Multiple-User Multiple-Relay Wireless Networks
Designing A Model For Quality of Employee-Organization Relationships (EORs) Based On Analysis Hierarchical Process (AHP)
Designing poly(amido amine) dendrimers containing core diversities by click chemistry of the propargyl focal point poly(amido amine) dendrons
Design of Electrophoretic and Biocompatible Poly(2-oxazoline)s Initiated by Perfluoroalkanesulfoneimides and Electrophoretic Deposition with Bioactive Glass
Design and fabrication of reconstructive mandibular models using fused deposition modeling
Design of microwave plasma and enhanced mechanical properties of thermoplastic composites reinforced with microwave plasma-treated carbon fiber fabric
Design of Peptide Imaging Agents for Whole-body and Intraoperative Molecular Imaging
Designed interfaces in polymer nanocomposites: A fundamental viewpoint
Design, Synthesis, Biological Evaluation, and Structural Characterization of Potent Histone Deacetylase Inhibitors Based on Cyclic alpha/beta-Tetrapeptide Architectures
Design of electronic t-out-of-n lotteries on the Internet
Design of Integrated Dual-Loop Delta-Sigma Modulated Switching Power Converter for Adaptive Wireless Powering in Biomedical Implants
Design of a Monolithic Automatic Substrate/Supply Multiplexer for DVS-Enabled Adaptive Power Converters
Design and development of solar power-assisted manual/electric wheelchair
Design and statistical analysis of a hybrid local search algorithm for course timetabling
Design and Analysis of a Highly User-Friendly, Secure, Privacy-Preserving, and Revocable Authentication Method
Design Considerations and Validation of Permanent Magnet Vernier Machine with Consequent Pole Rotor for Low Speed Servo Applications
Design and Basic Characteristics of Multi-Consequent-Pole Bearingless Motor With Bi-Tooth Main Poles
Design of a RCT evaluating the (cost-) effectiveness of a lifestyle intervention for male construction workers at risk for cardiovascular disease: The Health under Construction study
Design of micro resonator quantum well intensity modulator
Designing a collaborative learning game: Its validation with a turn-taking control scheme in a primary science unit
Design and Synthesis of Some (S)-2-(6-Methoxynaphthalen-2-yl)-N-substituted Ethyl Propanamide Derivatives as Potent Non-ulcerogenic Anti-inflammatory and Analgesic Agents
Design of a Leaf Spring Using a Genetic Algorithm
Design of a Modular Protein-Based MRI Contrast Agent for Targeted Application
Designing core ontologies
Design of Cellulose Dissolving Ionic Liquids Inspired by Nature
Design of Low-Loss 1-3 Piezoelectric Composites for High-Power Transducer Applications
Design and application of a semi-automated filtration system to study the distribution of particulate organic carbon in the water column of a coastal upwelling system
Designing immunoconjugates for cancer therapy
Design of a "new motif" with beta-amino acids and alpha-aminoxy acids: Synthesis of hybrid peptides with 12/10-helix
Design and Pedestrianism in a Smart Growth Development
Design of ionic liquids as a medium for the Grignard reaction
Designing New Lithium-Excess Cathode Materials from Percolation Theory: Nanohighways in LixNi2-4x/3Sbx/3O2
Design, synthesis and biological activity of a novel Rutin analogue with improved lipid soluble properties
Design and evaluation of a novel microphone-based mechanomyography sensor with cylindrical and conical acoustic chambers
Design of Curcumin loaded Cellulose Nanoparticles for Prostate Cancer
Design of practical sliding-mode controllers with constant switching frequency for power converters
Design and Synthesis of C3-Pyrazole/Chalcone-Linked Beta-Carboline Hybrids: Antitopoisomerase I, DNA-Interactive, and Apoptosis-Inducing Anticancer Agents
Design of maintenance schedules for fatigue-prone metallic components using reliability-based optimization
Designing efficient fusion schemes for multimodal biometric systems using face and palmprint
Design of switching path-planning control for obstacle avoidance of mobile robot
Design and Implementation of a Universal Appliance Controller Based on Selective Interaction Modes
Design, synthesis, imaging, and biomechanics of a softness-gradient hydrogel nucleus pulposus prosthesis in a canine lumbar spine model
Design and Synthesis of Fast-Degrading Poly(anhydride-esters)
Design and implementation of PFM mode high efficiency boost regulator
Design and Optimization of Steam Distribution Systems for Steam Power Plants
Design of a Method to Evaluate Yeasts to be Used as Starter Cultures in Dry-Cured Meat Products
Design, synthesis, and structure-activity relationship studies of 4-quinolinyl- and 9-acrydinylhydrazones as potent antimalarial agents
Desiccation cracks in saturated fine-grained soils: particle-level phenomena and effective-stress analysis
Design, synthesis, and metal binding of novel pseudo-oligopeptides containing two phosphinic acid groups
Design of cyclic RKKH peptide-conjugated PEG liposomes targeting the integrin alpha(2)beta(1) receptor
Design of log-periodic dipole array inspired antenna with very wide bandwidth
Design and Synthesis of New Chacones Substituted with Azide/Triazole Groups and Analysis of Their Cytotoxicity Towards HeLa Cells
Design and development of embroidered textile electrodes for continuous measurement of electrocardiogram signals
Design of a sinusoidal current source using a sliding-mode-controlled asymmetrical full-bridge multilevel converter
Design Considerations for a Low-Voltage High-Current Redundant Parallel Voltage Regulator Module System
Design a parallel buck derived converter system using the primary current droop sharing control
Design and fabrication of nanometric TiO2/Ag/TiO2/Ag/TiO2 transparent conductive electrode for inverted organic photovoltaic cells application
Design of a new self-etching HEMA-free adhesive
Design and demonstration of an ethanol fuel processor for HT-PEM fuel cell applications
Design and process study of Pd membrane reactors
Design Point for Predicting Year-Round Performance of Solar Parabolic Trough Concentrator Systems
Design, optimization and evaluation of poly-epsilon-caprolactone (PCL) based polymeric nanoparticles for oral delivery of lopinavir
Design and comparative analysis of single and multi-stack axial flux permanent magnet synchronous generator
Desired lifetime and end-of-life desires across adulthood from 20 to 90: A dual-source information model
Design of a vertically stacked reconfigurable dipole antenna for a base station
Design of a Fuzzy Multi-objective Power System Stabilizer
Designing Unreinforced Masonry Models
Design of Self-supporting Surfaces
Design of a novel wideband directivity patch antenna
Design of a JAIN SLEE/ESB-based platform for routing medical data in the ICU
Design of computer experiments applied to modeling of compliant mechanisms for real-time control
Design, synthesis and anti-Parkinsonian evaluation of 3-alkyl/aryl-8-(furan-2-yl)thiazolo[5,4-e][1,2,4]triazolo[1,5-c]pyrimidi ne-2(3H)-thiones against neuroleptic-induced catalepsy and oxidative stress in mice
Design and Implementation of Backtracking Wave-Pipeline Switch to Support Guaranteed Throughput in Network-on-Chip
Design and Torque Profile Analysis of an Outer-rotor SR Motor with Different Winding Configurations
Design and Fabrication of Si-Diaphragm, ZnO Piezoelectric Film-Based MEMS Acoustic Sensor Using SOI Wafers
Design of new strategy for green algal photo-hydrogen production: Spectral-selective photosystem I activation and photosystem II deactivation
Design of surface nanowire arrays for high efficiency thin (<= 10 mu m) Si solar cells
Design and implementation of a droop control in d-q frame for islanded microgrids
Design, synthesis and biological evaluation of 4-(1-(4(sulphanilamide)phenyl)-3-(methyl)-1H-pyrazol-5-yl)dine urea and N-acyl derivatives as a soluble epoxide hydrolase inhibitors
Design for Reliability Based Methodology for Automotive Gearbox Load Capacity Identification
Designing Iron-Amended Biosand Filters for Decentralized Safe Drinking Water Provision
Design of 1 kbit antifuse one time programmable memory IP using dual program voltage
Design of an 8 bit differential paired eFuse OTP memory IP reducing sensing resistance
Design of Asynchronous Multi-Bit OTP Memory
Design and validation of a corneal bioreactor
Design and characterization of novel cell-penetrating peptides from pituitary adenylate cyclase-activating polypeptide
Design, development and implementation of a technology enhanced hybrid course on molecular symmetry: Students' outcomes and attitudes
Design of Aerosol Coating Reactors: Precursor Injection
Design of a novel axial impeller as a part of counter-rotating axial compressor to compress water vapor as refrigerant
Design and modification of EGF4KDEL 7Mut, a novel bispecific ligand-directed toxin, with decreased immunogenicity and potent anti-mesothelioma activity
Design and Implementation of a Bionic Mimosa Robot with Delicate Leaf Swing Behavior
Design and Synthesis of Neuroprotective Methylthiazoles and Modification as NO-Chimeras for Neurodegenerative Therapy
Design of Asymptotic Second-Order Sliding Mode Control for Satellite Formation Flying
Designing a cost-effective and dual-functional muslin-based anion exchanger for defluoridation
Design and evaluation of a device for collecting exhaled breath condensate
Design and development of a novel, integrated bowling machine for cricket
Design of a WSN for the Sampling of Environmental Variability in Complex Terrain
Design of a wear tester for nano-reinforced polymer composites
Design Considerations for Optimizing Storyline Visualizations
Design of Reactor-Separator-Recycle Systems Based on the Optimization of Estimations of the Domain of Attraction
Designing VRM hysteretic controllers for optimal transient response
Design of a Planar Dual-Band Bandpass Filter
Design optimization of functionally graded dental implant for bone remodeling
Design, fabrication, and characterization of a planar, silicon-based, monolithically integrated micro laminar flow fuel cell with a bridge-shaped microchannel cross-section
Design of high stroke electrostatic micropumps: a charge control approach with ring electrodes
Design and synthesis of a novel series of N-alkyl isatin acylhydrazone derivatives that act as selective cannabinoid receptor 2 agonists for the treatment of neuropathic pain
Design and fabrication of insect-inspired composite wings for MAV application using MEMS technology
Design of a Circular Clamped Plate Excited by a Voice Coil and Piezoelectric Patches Used as a Loudspeaker
Design of a device for simultaneous particle size and electrostatic charge measurement of inhalation drugs
Design, Fabrication and Properties of Rib Poly(methylmethacrylimide) Optical Waveguides
Design of the Novel Wavelength Triplexer Using Multiple Polymer Microring Resonators
Design of prolonged release tablets using new solid acrylic excipients for direct compression
Design of Compact Linear Electromagnetic Actuator for Auto-Focusing in Phone Camera
Design considerations of underlapped source/drain regions with the Gaussian doping profile in nano-double-gate MOSFETs: A quantum simulation
Design and Operation of a Hybrid Modular Multilevel Converter
Design optimization of square and circular aluminium extrusion damage columns with crashworthiness criteria
Design of Signature Sequences for Overloaded CDMA and Bounds on the Sum Capacity With Arbitrary Symbol Alphabets
Design and control of electronic control suspension using a magneto-rheological shock absorber
Design and modeling magnetorheological directional control valve
Designer adenoviruses for nanomedicine and nanodiagnostics
Design, Synthesis, and Characterizations of a Series of Pt-4 Macrocycle and Fluorescent Sensing of Fe3+/Cu2+/Ni2+ Through Metal Coordination
Design and validation of an H5 TaqMan real-time one-step reverse transcription-PCR and confirmatory assays for diagnosis and verification of influenza A virus H5 infections in humans
Design and preparation of bioactive glasses with hierarchical pore networks
Design, Synthesis, and Biological Evaluation of Simplified Side Chain Hybrids of the Potent Actin Binding Polyketides Rhizopodin and Bistramide
Design of bioreactors for hydrogen production
Design of a microbial fuel cell and its transition to microbial electrolytic cell for hydrogen production by electrohydrogenesis
Design and demonstration of a novel micro-Coulter counter utilizing liquid metal electrodes
Design of cascadable optical unit to compress light for light transmission used for indoor illumination
Design and regioselective synthesis of trifluoromethylquinolone derivatives as potent antimicrobial agents
Designing H-infinity/GH(2) static-output feedback controller for vehicle suspensions using linear matrix inequalities and genetic algorithms
Design and characterization of a fluorescent ghrelin analog for imaging the growth hormone secretagogue receptor 1a
Design of Dual-Band Two-Branch-Line Couplers with Arbitrary Coupling Coefficients in Bands
Design of Concurrent Multiband Doherty Power Amplifiers for Wireless Applications
Design methods for broadband 3dB branch-line and rat-race hybrids
Design of 240,000 orthogonal 25mer DNA barcode probes
Designing Landscapes for Performance Based on Emerging Principles in Landscape Ecology
Design and experiments of new IP traceback method based on offline analysis
Designing parallel manipulators: from specifications to a real prototype
Design and optimization of a double-enzyme glucose assay in microfluidic lab-on-a-chip
Design considerations and solutions in rapid-prototyping an ultraviolet reactor for ice borehole disinfection
Design and evaluation of thin and flexible theophylline imprinted polymer membrane materials
Design and Validation of a Novel Assessment Tool for Laparoscopic Suturing of the Vaginal Cuff during Hysterectomy
Design and performance analysis of PID controller for an automatic voltage regulator system using simplified particle swarm optimization
Designing a variables two-plan sampling system of type TNTVSS-(n(T), n(N); k) for controlling process fraction nonconforming with unilateral specification limit
Design and fabrication of in-plane AFM probes with sharp silicon nitride tips based on refilling of anisotropically etched silicon moulds
Design of a post linac for an energy upgrade of a heavy-ion injector
Design Considerations for Aging Populations
Design and evaluation of an intelligent decision support system for nuclear emergencies
Design of class-E GaN HEMT power amplifier using elliptic low pass matching network with 86% efficiency
Design of Highly Efficient Broadband Class-E Power Amplifier Using Synthesized Low-Pass Matching Networks
Designing Cell-Targeted Therapeutic Proteins Reveals the Interplay between Domain Connectivity and Cell Binding
Design and Synthesis of a Novel Series of Bicyclic Heterocycles As Potent gamma-Secretase Modulators
Design and Implementation of IEEE 1900.4 Architecture Using IMS Functionality
Design and development of a multipurpose utility AWD electric vehicle with a hybrid powertrain based on PEM fuel cells and batteries
Design and testing of a fuel cell powertrain with energy constraints
Designing Electrical Contacts to MoS2 Monolayers: A Computational Study
Design, Preparation, and Study of Catalytic Gated Baskets
Designing surveys for tests of gravity
Design of head-mounted binoculars utilizing freeform surfaces
Design of a visible tomography diagnostic for negative ion RF source SPIDER
Design and Optimization of CPW-Based Composite Right/Left-Handed Transmission Line
Design and Implementation of a New Multilevel Inverter Topology
Designing Cyclometalated Ruthenium(II) Complexes for Anodic Electropolymerization
Design optimization of large gap single axis thrust magnetic bearing actuator
Design and Analysis of an Electromechanical Battery for Rural Electrification in Sub-Saharan Africa
Desipramine for neuropathic pain in adults
Design of Ca2+-independent Staphylococcus aureus sortase A mutants
Designed Cyclic Permutants of HIV-1 gp120: Implications for Envelope Trimer Structure and Immunogen Design
Design of oligoaziridine-PEG coatings for efficient nanogold cellular biotagging
Design of experiments in thermal spraying: A review
Design and Performance Evaluation of a 200 degrees C Interleaved Boost Converter
Design and experimental validation of linear and nonlinear vehicle steering control strategies
Design of flexible copper clad laminate with outstanding adhesion strength induced by chemical bonding
Design and Modeling of New UWB Metamaterial Planar Cavity Antennas with Shrinking of the Physical Size for Modern Transceivers
Design, synthesis and evaluation of a new calix[4]arene based molecular receptor for multiple ion selectivity
Design and synthesis of phosphole-based pi systems for novel organic materials
Design of a High-Data-Rate Differential Chaos-Shift Keying System
Design and characterization of a scalable airlift flat panel photobioreactor for microalgae cultivation
Designing payments for ecosystem services schemes: some considerations
Designing Topological Bands in Reciprocal Space
Design of flat lens-like graded index medium by photonic crystals: Exploring both low and high frequency regimes
Design, synthesis, theoretical calculations and biological evaluation of new non-symmetrical choline kinase inhibitors
Design of Pickup Coil Made of Litz Wire and Cooled at 77 K for High Sensitive Measurement of AC Magnetic Fields
Design and microstructural analysis of magnesium alloys for dynamical applications
Design of interfaces for information seeking
Designing Enhanced One-Dimensional Electrocatalysts for the Oxygen Reduction Reaction: Probing Size- and Composition-Dependent Electrocatalytic Behavior in Noble Metal Nanowires
Design, microfabrication and analysis of polysilicon thin layers for MEMS vibrating structures
Design analysis of an experimental jet impingement study by using Taguchi method
Design and implementation of a portable amagnetic shape memory rotary actuator
Design, Expression, and Processing of Epitomized Hepatitis C Virus-Encoded CTL Epitopes
Design of the low area monotonic trim DAC in 40 nm CMOS technology for pixel readout chips
Design of superhydrophobic surfaces by synthesis of carbon nanotubes over Co-Mo nanocatalysts deposited under microwave irradiation on Ti-containing mesoporous silica thin films
Design of a Microstrip Fed Printed Monopole Antenna for Bluetooth and UWB Applications with WLAN Notch Band Characteristics
Design strategy for networking membrane module and heat exchanger for direct contact membrane distillation process in seawater desalination
Design, testing and characterization of innovative TiN-TiO2 surfaces inactivating bacteria under low intensity visible light
Desire to continue working and job-related factors of older workers in Germany
Designing dynamic English: a creative reading system in a context-aware fitness centre using a smart phone and QR codes
Design of an underwater positioning sensor for crawling ship hull maintenance robots
Design and Characterization of a High Dynamic Range and Ultra Low Power 16-Channel ASIC for an Innovative 3D Imaging Space Plasma Analyzer
Desiccation stress in intertidal seaweeds: Effects on morphology, antioxidant responses and photosynthetic performance
Design, methods and demographic findings of the DEMINVALL survey: a population-based study of Dementia in Valladolid, Northwestern Spain
Designer Ionic Liquid Crystals Based on Congruently Shaped Guanidinium Sulfonates
Design and Optical Properties of Electromechanical Double-Membrane Photonic Crystal Cavities
Design of hydrothermally-stable dawsonite-based sorbents in technical form for CO2 capture
Design and Synthesis of a Peptidyl-FRET Substrate for Tumor Marker Enzyme human Matrix Metalloprotease-2 (hMMP-2)
Design of New Quad-Channel Diplexer With Compact Circuit Size
Design and discovery of mushroom tyrosinase inhibitors and their therapeutic applications
Design criteria for electrochemical shock resistant battery electrodes
Design of 65 nm CMOS SRAM for Space Applications: A Comparative Study
Design of a ProDer f 1 vaccine delivered by the MHC class II pathway of antigen presentation and analysis of the effectiveness for specific immunotherapy
Desiccating Stress-Induced Chemokine Expression in the Epithelium Is Dependent on Upregulation of NKG2D/RAE-1 and Release of IFN-gamma in Experimental Dry Eye
Design of packed bed thermal energy storage systems for high-temperature industrial process heat
Design, characterization and preliminary in vitro evaluation of a mucoadhesive polymer based on modified pectin and acrylic monomers with potential use as a pharmaceutical excipient
Design of dual action antibiotics as an approach to search for new promising drugs
Designing the color of AlTiN hard coating through interference effect
Designing dielectric resonators on substrates: Combining magnetic and electric resonances
Design of resonant mirrors with negative group delay
Designing HIV Prevention Interventions for Urban American Indians: Evolution of the Don't Forget Us Program
Design of head-mounted-display eyepiece system of liquid crystal on silicon
Design of Antimicrobial Membrane Based on Polymer Colloids/Multiwall Carbon Nanotubes Hybrid Material with Silver Nanoparticles
Design and biophysical characterization of atrazine-sensing peptides mimicking the Chlamydomonas reinhardtii plastoquinone binding niche
Design and analysis of electrical energy storage demonstration projects on UK distribution networks
Design and performance evaluation of solar dryer for drying of large cardamom (Amomum subulatum)
Design and development of energy efficient solar tunnel dryer for industrial drying
Design and Optimization of a Phosphopeptide Anchor for Specific Immobilization of a Capture Protein on Zirconium Phosphonate Modified Supports
Design, Construction and Evaluation of a Sun-Tracking System on a Mobile Structure
Design of a single-step immunoassay principle based on the combination of an enzyme-labeled antibody release coating and a hydrogel copolymerized with a fluorescent enzyme substrate in a microfluidic capillary device
Design, synthesis and applications of hyaluronic acid-paclitaxel bioconjugates
Design and evaluation of orifice arrangement for particle-excitation flow control valve
Design and determination of stator geometry for axial flux permanent magnet free rod rotor synchronous motor
Design of an estimator of the kinematics of AC contactors
Design, synthesis and evaluation of caffeic acid phenethyl ester-based inhibitors targeting a selectivity pocket in the active site of human aldo-keto reductase 1B10
Design of a meander dipole antenna with dielectric loading for a sensor node of a wireless sensor network
Design of an Electrically Small, Circularly Polarized, Parasitic Array Antenna for an Active 433.92-MHz RFID Handheld Reader
Design and fabrication of nickel microdisk-arrayed diamond electrodes for a non-enzymatic glucose sensor based on control of diffusion profiles
Design of efficient full-rate linear dispersion space-time block codes over correlated fading channels
Design, synthesis and characterization of zinc-3 hydroxy flavone, a novel zinc metallo complex for the treatment of experimental diabetes in rats
Design and validation of specific inhibitors of 17 beta-hydroxysteroid dehydrogenases for therapeutic application in breast and prostate cancer, and in endometriosis
Design of waveguide-integrated semiconductor laser sources for optical frequency comb generation
Design, Synthesis, and Evaluation of Thiol-Activated Sources of Sulfur Dioxide (SO2) as Antimycobacterial Agents
Design of Elastomeric Homo- and Copolymer Networks of Functional Aliphatic Polyester for Use in Biomedical Applications
Design, synthesis and antimicrobial evaluation of novel 1-benzyl 2-butyl-4-chloroimidazole embodied 4-azafluorenones via molecular hybridization approach
Design Optimization of Microwave Structures Using Low-Order Local Cauchy-Approximation Surrogates
Design for thermal sensation and comfort states in vehicles cabins
Design and evaluation of solid lipid nanoparticles modified with peptide ligand for oral delivery of protein drugs
Design and Fabrication of Luminescent Antireflective Sol-Gel Coatings with a Bi-Layer Structure
Design of potent grain refiners for wrought aluminium alloys
Design and operation of efficient energy systems: Biorefineries, waste to energy, enhanced heat transfer and fuel cell applications
Design and development of strain wave generating cam for a new concept 'harmonic drive'
Design of input couplers for efficient silicon thin film solar absorbers
Design, synthesis, and antitumor screening of certain novel tetrahydroquinoline sulfonamides
Design and optimization of a microstrip patch antenna for increased bandwidth
Design, synthesis and biological evaluation of novel nitrogen and sulfur containing hetero-1,4-naphthoquinones as potent antifungal and antibacterial agents
Design of new Type I and Type II photoinitiators possessing highly coupled pyrene-ketone moieties
Design, development and evaluation of optical motion-tracking system based on active white light markers
Design and Development of Mamdani-Like Fuzzy Control Algorithm for a Wheeled Human-Conveyance Vehicle Control
Design of convergent product concepts based on functionality: An association rule mining and decision tree approach
Design of a High Performance Thin All-Solid-State Supercapacitor Mimicking the Active Interface of Its Liquid-State Counterpart
Design and routing of storm flows in an urbanized watershed without surface streams
Desistance from problematic alcohol use without treatment among active heroin and cocaine users
Design and simulation of a thermo transfer type MEMS based micro flow sensor for arterial blood flow measurement
Design and pilot results of a mobile phone weight-loss application for women starting a meal replacement programme
Design and validation of the ball-pen probe for measurements in a low-temperature magnetized plasma
Designer Spin Pseudomolecule Implemented with Trapped Ions in a Magnetic Gradient
Design simplification of a small nuclear reactor for large-diameter neutron transmutation doping silicon using control rods
Design concept of a small nuclear reactor for large-diameter NTD-Si using a conventional PWR full-length fuel assembly
Design of the tree-shaped UWB antenna using fractal concept
Designing biologic selectivity for inflammatory bowel disease - role of vedolizumab
Design of a constant-force snap-fit mechanism for minimal mating uncertainty
Designing satellite tagging studies: estimating and optimizing data recovery
Design Is Everything?
Design, synthesis, characterization and DNA-binding studies of a triphenyltin(IV) complex of N-glycoside (GATPT), a sugar based apoptosis inducer: in vitro and in vivo assessment of induction of apoptosis by GATPT
Design of trapezoid monopole antenna with band-notched performance for UWB
Design and optimization of a semi-continuous high pressure carbon dioxide extraction system for acetic acid
Design and construction of a novel optical sensor for determination of trace amounts of dysprosium ion
Design of PAMAM-COO dendron-grafted surfaces to promote Pb(II) ion adsorption
Design and Synthesis of Chiral Heteroleptic Rhodium(II) Carboxylate Catalysts: Experimental Investigation of Halogen Bond Rigidification Effects in Asymmetric Cyclopropanation
Design of a methane processing system producing high-purity hydrogen
Design of poly(ethylene glycol)/streptavidin coimmobilized upconversion nanophosphors and their application to fluorescence biolabeling
Design and operation of a stochastic hydrogen supply chain network under demand uncertainty
Designer lipids for drug delivery: From heads to tails
Design of multi-layered bandpass filter with independently controllable triple-passband response
Design and synthesis of a new fluorescent tripod for chemosensor applications
Design of monoliths through their mechanical properties
Design and Characterization of Novel Tether Layer for Coupling of a Bilayer Lipid Membrane to the Surface of Gold
Design and synthesis of three-dimensional hydrogel scaffolds for intervertebral disc repair
Design and experimental validation of UDE based controller-observer structure for robust input-output linearisation
Designing the optimal process mean vector for mixed multiple quality characteristics
Design and in vitro evaluation of biocompatible dexamethasone-loaded nanoparticle dispersions, obtained from nano-emulsions, for inhalatory therapy
Design, analysis and experimental evaluation of block based transformation in MFCC computation for speaker recognition
Design and validation of the RiceWrist-S exoskeleton for robotic rehabilitation after incomplete spinal cord injury
Design and preparation of bionanocomposites based on layered solids with functional and structural properties
Designing foresight studies for Nanoscience and Nanotechnology (NST) future developments
Design, synthesis and biochemical investigation, by in vitro luciferase reporter system, of peptide nucleic acids as new inhibitors of miR-509-3p involved in the regulation of cystic fibrosis diseasegene expression
Design and Characterization of Miniature Auto-Focusing Voice Coil Motor Actuator for Cell Phone Camera Applications
Design, synthesis and antiviral efficacy of a series of potent chloropyridyl ester-derived SARS-CoV 3CLpro inhibitors
Design of carbon nanotube-polymer frameworks by electropolymerization of SWCNT-pyrrole derivatives
Design and Function of Novel Azoprobe Possessing Multipoint Binding Sites for Dopamine Recognition
Design of the multicenter standardized supervised exercise training intervention for the 'CLaudication: Exercise Vs Endoluminal Revascularization (CLEVER) study'
Design and implementation of FPGA-based Taguchi-chaos-PSO sun tracking systems
Design and analysis of functional multiwalled carbon nanotubes for infrared sensors
Design of tunable biperiodic graphene metasurfaces
Design of Prototype-Based Emotion Recognizer Using Physiological Signals
Design of heat sink for improving the performance of thermoelectric generator using two-stage optimization
Design and baseline data from the vanguard of the Comparison of Depression Interventions after Acute Coronary Syndrome (CODIACS) randomized controlled trial
Design of neural predictor for noise analysis of passenger car's engines
Design of an Integrated Filterbank for DESHIMA: On-Chip Submillimeter Imaging Spectrograph Based on Superconducting Resonators
Design of quantum Fourier transforms and quantum algorithms by using circulant Hamiltonians
Design and processing of a cost-effective piezoresistive MEMS cantilever sensor for medical and biomedical use
Designer Tridentate Mucin 1 Aptamer for Targeted Drug Delivery
Design and Synthesis of Isosteviol Triazole Conjugates for Cancer Therapy
Design, synthesis, antimicrobial, anticancer evaluation, and QSAR studies of 4-(substituted benzylidene-amino)-1,5-dimethyl-2-phenyl-1,2-dihydropyrazol-3-ones
Design of Alkyl Sulfate Ionic Liquids for Lubricants
Design and Facile Solid-Phase Synthesis of Conformationally Constrained Bicyclic Peptoids
Design, synthesis and protein-targeting properties of thioether-linked hydrogen bond surrogate helices
Design, Solid-Phase Synthesis, and Evaluation of a Phenyl-Piperazine-Triazine Scaffold as alpha-Helix Mimetics
Design of Ultrafast All-Optical Signal Processing Devices Based on Fiber Bragg Gratings in Transmission
Designed Biosynthesis of 36-Methyl-FK506 by Polyketide Precursor Pathway Engineering
Design and synthesis of cluster neoglycoconjugates based on D-glucose
Design and Implementation of a Biomimetic Turtle Hydrofoil for an Autonomous Underwater Vehicle
Design and development of a visible light harvesting Ni-Zn/Cr-CO32- LDH system for hydrogen evolution
Designing Regenerative Biomaterial Therapies for the Clinic
Designing and computing optimal policies on a production model for non-instantaneous deteriorating items with shortages
Design of model-based interfaces for a real world information system
Design and Evaluation of Primaquine-Artemisinin Hybrids as a Multistage Antimalarial Strategy
Design and implementation of advanced systems in a flexible-stretchable technology for biomedical applications
Design principles and considerations for the 'ideal' silicon piezoresistive pressure sensor: a focused review
Design and synthesis of heteroatoms doped carbon/polyaniline hybrid material for high performance electrode in supercapacitor application
Design and synthesis of 3D ordered macroporous ZrO2/Zeolite nanocomposites
Design of the Solution-Processed Intermediate Layer by Engineering for Inverted Organic Multi junction Solar Cells
Design and fabrication of lotus-root-like multi-bore hollow fiber membrane for direct contact membrane distillation
Designer peptide surfactants stabilize diverse functional membrane proteins
Design of an ultracompact low-power all-optical modulator by means of dispersion engineered slow light regime in a photonic crystal Mach-Zehnder interferometer
Design of a Protection Thermal Energy Storage Using Phase Change Material Coupled to a Solar Receiver
Design principles for supercritical CO2 viscosifiers
Design of economic dispatch model for Gencos with thermal and wind powered generators
Design of compact planar antenna with dual notched bands using slotted rectangular patch for ultrawideband applications
Design of compact planar ultrawideband antenna with dual-notched bands using slotted square patch and pi-shaped conductor-backed plane
Design, synthesis, in vitro evaluation of tetrahydropyrimidine-isatin hybrids as potential antibacterial, antifungal and anti-tubercular agents
Design and In Vitro Evaluation of Layer by Layer siRNA Nanovectors Targeting Breast Tumor Initiating Cells
Design, Synthesis and Biological Activity of 1,2-Benzothiazine Derivatives as Potential Anticancer Agents
Designed Surface Residue Substitutions in [NiFe] Hydrogenase that Improve Electron Transfer Characteristics
Design and engineering of nanogels for cancer treatment
Designed biomolecule-cellulose complexes for palladium recovery and detoxification
Design of the Lifestyle Improvement through Food and Exercise (LIFE) study: A randomized controlled trial of self-management of type 2 diabetes among African American patients from safety net health centers
Design and applications of bifunctional cinnamide derivatives as potential antimycobacterial agents with few hepatotoxic effects
Designing real nanotube-based gas sensors
Design opportunities for actively targeted nanoparticle vaccines
Design and Characterization of Plasmonic Terahertz Wave Detectors Based on Silicon Field-Effect Transistors
Design and Testing of an Adjustable Linkage for a Variable Displacement Pump
Designing slow water-releasing alginate nanoreserviors for sustained irrigation in scanty rainfall areas
Designing antimicrobial peptides: form follows function
Design and Analysis of a Low-Power 3-6-Gb/s 55-GHz OOK Receiver With High-Temperature Performance
Design, synthesis, and evaluation of (E)-N-substituted benzylidene-aniline derivatives as tyrosinase inhibitors
Designing soft nanomaterials via the self assembly of functionalized icosahedral viral capsid nanoparticles
Design, modeling and synthesis of molecular tweezers with self-assembly properties
Designing distance dependent SERS assay for monitoring photothermal antibacterial activity response
Design, Synthesis, and Structure-Activity Correlations of Novel Dibenzo[b,d]furan, Dibenzo[b,d]thiophene, and N-Methylcarbazole Clubbed 1,2,3-Triazoles as Potent Inhibitors of Mycobacterium tuberculosis
Designing Adverse Event Forms for Real-World Reporting: Participatory Research in Uganda
Design of glass-ceramic complex microstructure with using onset point of crystallization in differential thermal analysis
Design and Synthesis of Triphenylphosphonium Functionalized Nanoparticle Probe for Mitochondria Targeting and Imaging
Design of High-Efficiency Fully-Etched Binary Blazed Gratings Nearly Vertical Coupler
Design and optimization of new hybrid fractal tree antenna
Design, Processing and Characterization of Fly Ash-Based Geopolymers for Lightweight Concrete Application
Design of a novel biohythane process with high H-2 and CH4 production rates
Design of Molecular and Ionic Complexes of Fullerene C-60 with Metal(II) Octaethylporphyrins, (MOEP)-O-II (M = Zn, Co, Fe, and Mn) Containing Coordination M-N(ligand) and M-C(C-60(-)) Bonds
Design and Evaluation of Efficient Router Architecture for Triplet-Based Network-on-Chip Topology
Design of Strain-Sensing Devices in Microscale by Using Surface Plasmon Polaritons
Design of hybrid optical waveguide with a 90A degrees bend structure for high density photonics integrated circuits
Design of minimax-linear quadratic Gaussian controller using the frequency domain subspace identified model of flexible plate
Design of a photoelastic measurement of principal stresses by a phase-shifting method
Designing bulk metallic glass and glass matrix composites in martensitic alloys
Design guidelines for Classroom Multiplayer Presential Games (CMPG)
Design, synthesis and biological evaluation of novel thiosemicarbazide analogues as potent anticonvulsant agents
Designs from the deep: Marine organisms for bone tissue engineering
Design, Synthesis, and Biological Evaluation of Novel cRGD-Paclitaxel Conjugates for Integrin-Assisted Drug Delivery
Design of chemical glycosyl donors: does changing ring conformation influence selectivity/reactivity?
Designing next-generation platforms for evaluating scientific output: what scientists can learn from the social web
Design of a New Type Planar Balun by Using Trans-Directional Couplers
Design of piezoelectric transformers for power converters by means of analytical and numerical methods
Design of a speed meter interferometer proof-of-principle experiment
Design of Clayware Separator-Electrode Assembly for Treatment of Wastewater in Microbial Fuel Cells
Desirable site conditions for introduction sites for a locally rare and threatened fern species Asplenium septentrionale (L.) Hoffm
Design of Al-Fe alloys for fast on-board hydrogen production from hydrolysis
Designing nanomolar antagonists of DC-SIGN-mediated HIV infection: ligand presentation using molecular rods
Design considerations for the use of laser-plasma accelerators for advanced space radiation studies
Design and applications of an X-band hybrid photoinjector
Design of high efficiency organic solar cell with light trapping
Design of a Gd-DOTA-Phthalocyanine Conjugate Combining MRI Contrast Imaging and Photosensitization Properties as a Potential Molecular Theranostic
Designing net-zero energy buildings for the future climate, not for the past
Design and Implementation of Noble Metal Nanoparticle Cluster Arrays for Plasmon Enhanced Biosensing
Design Science in Decision Support Systems Research: An Assessment using the Hevner, March, Park, and Ram Guidelines
Design, synthesis, and evaluation of novel VEGFR2 kinase inhibitors: Discovery of [1,2,4]triazolo[1,5-a]pyridine derivatives with slow dissociation kinetics
Design, synthesis and biological evaluations of chirally pure 1,2,3,4-tertrahydroisoquinoline analogs as anti-cancer agents
Design studies for ASIC implementations of 28 GS/s optical QPSK- and 16-QAM-OFDM transceivers
Designing Chemically Modified Oligonucleotides for Targeted Gene Silencing
Design of organic-inorganic solid polymer electrolytes: synthesis, structure, and properties
Designing Nanoparticle Trans location through Cell Membranes by Varying Amphiphilic Polymer Coatings
Design, Synthesis, Crystal Structure, and Antimicrobial Evaluation of Novel Pyrazolyl-1,3,5-oxadiazoles, Pyrazolyl-1,2,4-triazoles and their Related Thioglycosides
Design, synthesis & evaluation of condensed 2H-4-arylaminopyrimidines as novel antifungal agents
Design of Fixed Bed Column for Lead Removal on Natural Zeolite Based on Batch Studies
Design and Fabrication of Highly Manufacturable Microelectromechanical Systems Test Sockets for Ball Grid Array Integrated Circuit Packages
Design, synthesis and pharmacological evaluation of novel pyrrolizine derivatives as potential anticancer agents
Design, Implementation, and Field Testing of a Portable Fluorescence- Based Vapor Sensor
Design and Validation of Scales to Measure Adolescent Attitude toward Eating and toward Physical Activity
Design of an Impulse Radiating Antenna Using a Curved TEM-Wire Fed Parabola
Design of nonrecursive FIR filters with simultaneously MAXFLAT magnitude and prescribed cutoff frequency
Design and simulation of high sensitive photonic crystal waveguide sensor
Designing and In-Vitro Characterization of Micelle Forming Amphiphilic PEGylated Rapamycin Nanocarriers for the Treatment of Gastric Cancer
Design of a prospective clinical study on the agreement between the Continuous GlucoseMonitor, a novel device for CONTinuous ASSessment of blood GLUcose levels, and the RAPIDLab (R) 1265 blood gas analyser: The CONTASSGLU study
Design of electrospayed non-spherical poly (L-lactide-co-glicolide) microdevices for sustained drug delivery
Design of an instrument to measure alcohol-related psychosocial influences in the development of norms among 13-year-old to 17-year-old adolescents
Design of a Magnet-Switching Actuator With High Efficiency and Auto-Locking Function
Design Study Methodology: Reflections from the Trenches and the Stacks
Design, Synthesis, and Evaluation of 3,5-Disubstituted 7-Azaindoles as Trk Inhibitors with Anticancer and Antiangiogenic Activities
Design and Evaluation of a Three Dimensionally Ordered Macroporous Structure within a Highly Patterned Cylindrical Sn-Ni Electrode for Advanced Lithium Ion Batteries
Design and performances of a cyclonic flux cell for laser ablation
Design and performance characteristics of solar adsorption refrigeration system using parabolic trough collector: Experimental and statistical optimization technique
Design and Performance Analysis of Quadruple Winding Redundancy Brush less DC Torque Motor
Design and Synthesis of Diazatricyclodecane Agonists of the G-Protein-Coupled Receptor 119
Design and rationale of FOCUS (PX-171-011): A randomized, open-label, phase 3 study of carfilzomib versus best supportive care regimen in patients with relapsed and refractory multiple myeloma (R/R MM)
Design Principles for Rapid Prototyping Forces Sensors Using 3-D Printing
Design of main-chain polymers of chiral imidazolidinone for asymmetric organocatalysis application
Design of a double core linear magnetometer based on asymmetric magnetoimpedance effect in nanostructured Finemet ribbons
Design and integration of a generic disposable array-compatible sensor housing into an integrated disposable indirect microfluidic flow injection analysis system
Designing a formative e-assessment: Latent class analysis of early reading skills
Design and synthesis of boron containing potential pan-RAR inverse agonists
Design of the Rule Out Myocardial Ischemia/Infarction Using Computer Assisted Tomography: A multicenter randomized comparative effectiveness trial of cardiac computed tomography versus alternative triage strategies in patients with acute chest pain in the emergency department
Design, synthesis and biological evaluation of benzo[e][1,2,4]triazin-7(1H)-one and [1,2,4]-triazino[5,6,1-jk]carbazol-6-one derivatives as dual inhibitors of beta-amyloid aggregation and acetyl/butyryl cholinesterase
Design of Non-Standard Insulin Analogs for the Treatment of Diabetes Mellitus
Designing the next generation of ocean iron fertilization experiments
Design and validation issues in RNA-seq experiments
Design, synthesis and evaluation of aminobenzophenone derivatives containing nitrogen mustard moiety as potential central nervous system antitumor agent
Designing effective vaccines for colorectal cancer
Design of a flow-controlled asymmetric droplet splitter using computational fluid dynamics
Design Strategy for 4G Handset Antennas and a Multiband Hybrid Antenna
Design for low power and power management in IBM Blue Gene/Q
Design of experiments utilization to map the processing capabilities of a micro-spray dryer: particle design and throughput optimization in support of drug discovery
Design and synthesis of a highly selective, orally active and potent anaplastic lymphoma kinase inhibitor (CH5424802)
Design and Numerical Analysis of W-band Oscillators With Hollow Electron Beam
Design and performance of a high-flux electrospray ionization source for ion soft landing
Design of a bZip Transcription Factor with Homo/Heterodimer-Induced DNA-Binding Preference
Design Guidelines for a Double Scattering Compton Camera for Prompt-gamma Imaging During Ion Beam Therapy: A Monte Carlo Simulation Study
Design and Performance Analysis of Micro Proton Exchange Membrane Fuel Cells
Designation of human adenovirus types based on sequence data: An unfinished debate
Design, development and fabrication of indigenous 30 kA NbTi CICC for fusion relevant superconducting magnet
Design and evaluation of inhalable chitosan-modified poly (DL-lactic-co-glycolic acid) nanocomposite particles
Design of Hard Coating Resin for In-mold Decoration (IMD) Foil and Effects of EB Irradiation on IMD Foil Layers
Design and Implementation of Low-Power Hardware Architecture With Single-Cycle Divider for On-Line Clustering Algorithm
Design Space Exploration for the Profitability of a Rule-Based Aggregator Business Model Within a Residential Microgrid
Design and testing of a series hybrid vehicle with an ultracapacitor energy buffer
Design and validation of a pericentromeric BAC clone set aimed at improving diagnosis and phenotype prediction of supernumerary marker chromosomes
Design and performance analysis of cylindrical surrounding double-gate MOSFET for RF switch
Design, synthesis and evaluation of N-benzoylindazole derivatives and analogues as inhibitors of human neutrophil elastase
Design of microstrip-based surface coils for low-field small-bore MR applications
Design and Assessment of Joyful Mobile Navigation Systems based on TAM and Integrating Learning Models Applied on Ecological Teaching Activity
Design and optimisation of a filter based on neural networks. Application to reduce noise in experimental measurement by TGA of thermal degradation of 1-ethyl-3-methylimidazolium ethylsulfate ionic liquid
Design and Validation of a Method for Evaluation of Interocular Interaction
Design and characterization of two strong fullerene receptors based on ball-socket interactions
Design of conduction band structure of TiO2 electrode using Nb doping for highly efficient dye-sensitized solar cells
Design and chemoproteomic functional characterization of a chemical probe targeted to bromodomains of BET family proteins
Design of PID controllers in double feedback loops for SISO systems with set-point filters
Design, Synthesis, and In Vitro Antioxidant Activity of 1,3,5-Trisubstituted-2-pyrazolines Derivatives
Design of load-ended spiral antennas for RFID UHF passive tags using improved artificial bee colony algorithm
Design directions for ethyl lactate synthesis in a pervaporation membrane reactor
Designing quality improvement initiatives: the action effect method, a structured approach to identifying and articulating programme theory
Design of a 5-kW advanced fuel cell polygeneration system
Design of Learning Spaces: Emotional and Cognitive Effects of Learning Environments in Relation to Child Development
Design of Web-Based Interactive 3D Concept Maps: A Preliminary Study for an Engineering Drawing Course
Design of a micro-pattern structure for a three dimensionally macroporous Sn-Ni alloy anode with high areal capacity
Design and Analysis of an Interleaved Boundary Conduction Mode (BCM) Buck PFC Converter
Designing Novel Therapies Against Sarcomas in the Era of Personalized Medicine and Economic Crisis
Design of wavelet neural networks based on symmetry fuzzy C-means for function approximation
Design and study protocol of the maternal smoking cessation during pregnancy study, (M-SCOPE)
Design of an adaptive fuzzy sliding-mode controller for chaos synchronization
Design of a VHF/UHF/L-Band Low-Power Active Antenna for Mobile Handsets
Designed Polyelectrolyte Shell on Magnetite Nanocore for Dilution-Resistant Biocompatible Magnetic Fluids
Designing New 5-Nitroimidazoles: Towards Safer Anti-infectious Agents
Design of a linear-motion dual-stage actuation system for precision control
Design of a 250-Gbit/s SiGe HBT Electrooptic Modulator
Design, Synthesis and Biological Evaluation of Nitro Oxide Donating N-Hydroxycinnamamide Derivatives as Histone Deacetylase Inhibitors
Design, synthesis, and uniquely electron-spin-polarized quartet photo-excited state of a pi-conjugated spin system generated via the ion-pair state
Design strategies for direct multi-scale and multi-orientation feature extraction in the log-polar domain
Design and development of sustainable remediation process for mitigation of fluoride contamination in ground water and field application for domestic use
Design of a MIMO Dielectric Resonator Antenna for LTE Femtocell Base Stations
Design and rationale of the Treatment of Acute Coronary Syndromes with Otamixaban trial: A double-blind triple-dummy 2-stage randomized trial comparing otamixaban to unfractionated heparin and eptifibatide in non-ST-segment elevation acute coronary syndromes with a planned early invasive strategy
Design, synthesis, and anticonvulsant activity of novel quinazolinone analogues
Design, Synthesis and Screening of Quinoline-Incorporated Thiadiazole as a Potential Anticonvulsant
Design proposal for a low loss in-plane active photonic crystal waveguide with vertical electrical carrier injection
Design of growth factor sequestering biomaterials
Design and implementation of UWB planar monopole antenna with dual-band rejection characteristics
Design of Emergency Demand Response Program Using Analytic Hierarchy Process
Design for broadband on-chip isolator using stimulated Brillouin scattering in dispersion-engineered chalcogenide waveguides
Designing a symmetry-protected molecular device
Design of FeBi nanoparticles for imaging applications
Design method for the optimization of district heating systems using mixed integer linear programming
Design of the optimal industrial symbiosis system to improve bioethanol production
Design of cell-matrix interactions in hyaluronic acid hydrogel scaffolds
Design of an Ultralow Loss Silicon Plasmonic Waveguide and High-Performance Devices
Designing a Bernal Spiral from Patchy Colloids
Design Procedure for High-Frequency Operation of the Modified Series-Resonant APWM Converter to Reduce Size and Circulating Current
Design and Synthesis of New Hybrid Molecules That Activate the Transcription Factor Nrf2 and Simultaneously Release Carbon Monoxide
Designing of peptides with desired half-life in intestine-like environment
Design of Microwave Absorbing Coatings With New Ni and La Doped SrCo2 - W Hexaferrites
Design and development of fixture and force measuring system for friction stir welding process using strain gauges
Design of dendrimer-based nanostructured catalyst systems and their catalytic activity in hydrogenation: Synthesis of ruthenium nanoparticles immobilized in dendrimer networks
Design and Characterization of Auxotrophy-Based Amino Acid Biosensors
Design of Gradient Coil for Magnetic Resonance Imaging Applying Particle-Swarm Optimization
Design of pi electron network in graphene using atomic Pt adsorbates
Design, synthesis and biological evaluation of peptidyl-vinylaminophosphonates as novel cysteine protease inhibitors
Designing an intervention to help people with colorectal adenomas reduce their intake of red and processed meat and increase their levels of physical activity: a qualitative study
Designing drugs that encourage spinal cord injury healing
Design and implementation of an optimal multiple-model adaptive controller for line-of-sight stabilization
Designing Processive Catalytic Systems. Threading Polymers through a Flexible Macrocycle Ring
Designing a Personalized Guide Recommendation System to Mitigate Information Overload in Museum Learning
Designing laboratory metallic iron columns for better result comparability
Designing a safe and sustainable pediatric neurosurgical practice: the English experience
Design and implementation of a P2P communication infrastructure for WSN-based vehicular traffic control applications
Design, synthesis, anti-schistosomal activity and molecular docking of novel 8-hydroxyquinoline-5-sufonyl 1,4-diazepine derivatives
Design considerations for low-light level low-Fresnel number optical systems
Design, synthesis, pharmacological evaluation and in silico ADMET prediction of novel substituted benzimidazole derivatives as angiotensin II-AT(1) receptor antagonists based on predictive 3D QSAR models
Design and mechanical property analysis of AA1050 turbine blades manufactured by equal channel angular extrusion and isothermal forging
Design of fuzzy logic controller of industrial robot for roughing the uppers of fashion shoes
Design and study of an electrical liquid heater using conductive polymer composite tubes
Design of Hybrid Dynamic Balancer and Vibration Absorber
Design and optimization of one-dimensional ferrite-film based magnonic crystals
Design of a Novel Wavelet Based Transient Detection Unit for In-Vehicle Fault Determination and Hybrid Energy Storage Utilization
Design and generation of recombinant rabies virus vectors
Design and Implementation of a Current-balancing Circuit for LED Security Lights
Design Strategies for Shape-Persistent Covalent Organic Polyhedrons (COPs) through Imine Condensation/Metathesis
Design, Synthesis, and Biological Evaluation of New Diaminoquinazolines as beta-Catenin/Tcf4 Pathway Inhibitors
Design and characterization of new Cu alloys to substitute Cu-25%Ni for coinage applications
Designing maneuverable micro-swimmers actuated by responsive gel
Design of digitally controlled multiple-pattern time-modulated antenna arrays with phase-only difference
Design of Pressure Equipment Taking into Account the Cracks
Design, Synthesis, and Application of a Library of Supramolecular Structures Formed by N-Lipidated Peptides Immobilized on Cellulose. Artificial Receptors
Designing, implementing and managing marine protected areas: Emerging trends and opportunities for coral reef nations
Design, Synthesis, and Biological Evaluation of (3R)-1,2,3,4-Tetrahydro-7-hydroxy-N-[(1S)-1-[[(3R,4R)-4-(3-hydroniphenyl )-3,4-dimethyl-1-piperidinyl]methyl]-2-methylpropyl]-3-isoquinolinecarbo xamide (JDTic) Analogues: In Vitro Pharmacology and ADME Profile
Designing In Vivo Bioreactors for Soft Tissue Engineering
Design of reliability qualification test for pneumatic cylinders based on performance degradation data
Designing a network of marine reserves in the Mediterranean Sea with limited socio-economic data
Design and synthesis of new series of coumarin-aminopyran derivatives possessing potential anti-depressant-like activity
Design of Ordered Mesoporous Composite Materials and Their Electrocatalytic Activities for Water Oxidation
Design and synthesis of regioisomeric triazole based peptidomimetic macrocycles and their dipole moment controlled self-assembly
Design and properties of functional nanotubes from the self-assembly of cyclic peptide templates
Design of New Superconducting Materials, and Point-Contact Spectroscopy as a Probe of Strong Electron Correlations
Design of antenna arrays for near-field focusing requirements using optimisation
Design and Rolling Locomotion of a Magnetically Actuated Soft Capsule Endoscope
Design and synthesis of Troger's base ditopic receptors: host-guest interactions, a combined theoretical and experimental study
Design and methods for a randomized clinical trial of a diabetes self-management intervention for low-Income Latinos: Latinos en Control
Design and synthesis of a new coumarin-based %26apos;turn-on%26apos; fluorescent probe selective for Cu+2
Design, synthesis, and biological evaluation of indole-based 1,4-disubstituted piperazines as cytotoxic agents
Design and energy control of stand-alone hybrid wind/photovoltaic/fuel cell power system supplying a desalination unit
Design of ultrasonically-activatable nanoparticles using low boiling point perfluorocarbons
Design and Applications of Protein Epitope Mimetics
Desire: The New Hot Spot in Self-Control Research
Design Principle for Realizing Low Bending Losses in All-Solid Photonic Bandgap Fibers
Designation of subtypes of Mycobacterium tuberculosis Beijing family: an issue of priority
Design optimization of wastewater collection networks by PSO
Design and Analysis of a Morphing Composite Airfoil Using Unbalanced Layup and Unconventional Ply Angles
Design of responsive materials using topologically interlocked elements
Design and performance analysis of a bio-optical sub-assembly for diffuse optical technologies
Designing Drug Trials: Considerations for Pregnant Women
Design and Wrinkling Behavior of a Contact Lens With an Integrated Liquid Crystal Light Modulator
Design and Structure Activity Correlation of RGDS Cell-Attachment Peptide Containing Molecules
Design and Control of Glycerol-tert-Butyl Alcohol Etherification Process
Design of an optimal process for enhanced production of bioethanol and biodiesel from algae oil via glycerol fermentation
Design of high-efficiency non-insulated step-up converters
Design, synthesis and biological evaluation of bicyclic iminosugar hybrids: conformational constraint as an effective tool for tailoring the selectivity of alpha-glucosidase inhibitors
Design, synthesis and photochemical properties of the first examples of iminosugar clusters based on fluorescent cores
Design of novel BH3 mimetics for the treatment of chronic lymphocytic leukemia
Design of an Ultra-Mideband Antenna Using a Ring Resonator with a Notch Function
Design, synthesis and evaluation of novel PEGylated curcumin analogs as potent Nrf2 activators in human bronchial epithelial cells
Design and analysis of a capacitive moisture sensor for municipal solid waste
Design of a high efficiency CdS/CdTe solar cell with optimized step doping, film thickness, and carrier lifetime of the absorption layer
Design of a CO-releasing Extracellular Scaffold Using in Vivo Protein Crystals
Designing relevant biochars as soil amendments using lignocellulosic-based and manure-based feedstocks
Designs and analyses for exploring the relationship of magnetic fields to childhood leukaemia: A pilot project for the Danish National Birth Cohort
Design and Implementation of an Educational Game for Teaching Chemistry in Higher Education
Design, synthesis and evaluation of novel 16-imidazolyl substituted steroidal derivatives possessing potent diversified pharmacological properties
Design and development of a field-deployable single-molecule detector (SMD) for the analysis of molecular markers
Design and Development of Bioinspired Guanine-Based Organic Catalyst for Asymmetric Catalysis
Design and Divergent Synthesis of Aza Nucleosides from a Chiral Imino Sugar
Design and Implementation of an Online Course on Research Methods in Palliative Care: Lessons Learned
Design, construction, and performance of a real-time holographic refractometry prototype for liquid analysis
Design of highly efficient Zn-, Cu-, Ni- and Co-promoted M-AlPO4 solid acids: The acetalization of glycerol with acetone
Design and immunological properties of Helicobacter pylori glycoconjugates based on a truncated lipopolysaccharide lacking Lewis antigen and comprising an alpha-1,6-glucan chain
Design of 825 GHz square helix travelling-wave tube
Design, synthesis, and characterization of the electrochemical, nonlinear optical properties, and theoretical studies of novel thienylpyrrole azo dyes bearing benzothiazole acceptor groups
Design management of functional foods for quality of life improvement
Design and operation of water desalination supply chain using mathematical modelling approach
Design of a refractive index sensor based on surface soliton waveguides
Design of new quadruplexer with compact size, high isolation and wide stopband
Design of high T-g Zr-based metallic glasses using atomistic simulation and experiment
Design and evaluation of a fast Fourier transform-based nonlinear dielectric spectrometer
Designing quadplex (four-phase) microstructures in an ultrahigh carbon steel
Design, synthesis, and biological evaluation of abiotic, non-lactone modulators of LuxR-type quorum sensing
Design, synthesis and biological evaluation of non-natural modulators of quorum sensing in Pseudomonas aeruginosa
Designing Functional Metal-Organic Frameworks by Imparting a Hexanuclear Copper-Based Secondary Building Unit Specific Properties: Structural Correlation With Magnetic and Photocatalytic Activity
Design and performance of an insect-inspired nano air vehicle
Design exploration of a NVM based hybrid instruction memory organization for embedded platforms
Design, in-sodium testing and performance evaluation of annular linear induction pump for a sodium cooled fast reactor
Design, synthesis and biological evaluation of substituted pyrrolo[2,3-d] pyrimidines as multiple receptor tyrosine kinase inhibitors and antiangiogenic agents
Design, synthesis and evaluation of graftable thrombin inhibitors for the preparation of blood-compatible polymer materials
Design of a flat-gain multipumped distributed fiber Raman amplifier by particle swarm optimization
Design and analysis of periodic multiple seeds
Design considerations for efficient planar-optical systems
Design of 15 dB directional coupler using substrate-integrated waveguide technology
Designing Various Self-Assembled ZnOx Quantum Dots/Islands on Silicon with Distinctive Characteristics by Magnetron Sputter
Design and in Vitro Activities of N-Alkyl-N-[(8-R-2,2-dimethyl-2H-chromen-6-yl)methyl]heteroarylsulfonamid es, Novel, Small-Molecule Hypoxia Inducible Factor-1 Pathway Inhibitors and Anticancer Agents
Design and Infection: A Call for Greater Progress Through Research
Designing Interfaces with Social Presence: Using Vividness and Extraversion to Create Social Recommendation Agents
Design a novel optical adsorbent for simultaneous ultra-trace cerium(III) detection, sorption and recovery
Design of an RF-heated bulk AlN growth reactor: Induction heating and heat transfer modeling
Designing candidate gene and genome-wide case-control association studies
Design of cationic conjugated polyelectrolytes for DNA concentration determination
Design and synthesis of 1,3,5-trisubstituted 1,2,4-triazoles as CYP enzyme inhibitors
Design and Optimization of Mechanically Resonant Torsional Spring Mechanism for Laser Light Dispersion Applications
Design of a Piezoelectric-Driven Tilt Mirror for a Fast Laser Scanner
Design, Synthesis, and Incorporation of Fluorous 5-Methylcytosines into Oligonucleotides
Design and development of a new pyrromethene dye with improved photostability and lasing efficiency: Theoretical rationalization of photophysical and photochemical properties
Desiccation of the resurrection plant Craterostigma plantagineum induces dynamic changes in protein phosphorylation
Design and Synthesis of a Bombesin Peptide-Conjugated Tripodal Phosphino Dithioether Ligand Topology for the Stabilization of the fac-[M(CO)(3)](+) Core (M=(99) Tc-m or Re)
Designing and Implementing a Scalable Video-Streaming System Using an Adaptive Control Scheme
Design of ultra compact polarization splitter based on the complete photonic band gap
Designing Simple Tridentate Ligands for Highly Luminescent Europium Complexes
Design of an Insulin Analog with Enhanced Receptor Binding Selectivity RATIONALE, STRUCTURE, AND THERAPEUTIC IMPLICATIONS
Design of ultrafast all-optical 4-bit parity generator and checker using quantum-dot semiconductor optical amplifier-based Mach-Zehnder interferometer
Design forces for groups of six cylindrical silos by artificial neural network modelling
Design, synthesis and antibacterial activity of minor groove binders: The role of non-cationic tail groups
Design, modeling and characterization of microfluidic architectures for high flow rate, small footprint microfluidic systems
Design of microstrip tri-band bandpass filter using square ring loaded resonator
Design of a 2D no-flow chamber to monitor hematopoietic stem cells
Design of a comfortable optimal driving strategy for electric vehicles using multi-objective optimization
Design of micro-ring resonator based all-optical parity generator and checker circuit
Designing of the centers for adsorption of bile acids on a silica surface
Design of Angiotensin-converting Enzyme 2 (ACE2) Inhibitors by Virtual Lead Optimization and Screening
Design of an ultrafast all-optical differentiator based on a fiber Bragg grating in transmission
Design for environment: a state-of-the-art review
Design and scaling laws of ramified fluid distributors by the constructal approach
Design with constructal theory
Design and synthesis of sulfobetainic diketopyrrolopyrrole (DPP) laser dyes
Designing photonic quasi-crystal fibers of various folds: onto optimization of efficiency and bandwidth of second harmonic generation
Design methodology for multi-pumped discrete Raman amplifiers: case-study employing photonic crystal fibers
Design, Testing and Kinetic Analysis of Bulky Monodentate Phosphorus Ligands in the Mizoroki-Heck Reaction
Design of Single-Site Ti Embedded Highly Hydrophilic Silica Thin Films with Macro-Mesoporous Structures
Design and Development of Oxazol-5-Ones as Potential Partial PPAR-gamma Agonist Against Cancer Cell Lines
Design of a dual-polarised antenna with high isolation and a metallic cube for beyond 4G small base station applications
Design of near-field irregular diffractive optical elements by use of a multiresolution direct binary search method
Design methodology accounting for the effects of porous medium heterogeneity on hydraulic residence time and biodegradation in horizontal subsurface flow constructed wetlands
Design and Synthesis of Novel Polycycles Based on the 3H-Pyrrolo/6,7-Dihydropyrido[1,2-a] indole Scaffold as Templates for Pharmaceutical Development
Design, characterization, and utilization of a fast fluorescence derivatization reaction utilizing o-phthaidialdehyde coupled with fluorescent thiols
Design of oxy-fluoride glass-ceramics containing NaLaF4 nano-crystals
Design of fuzzy logic controller for smart base isolation system using genetic algorithm
Design and Performance of an Optimal Inertial Power Harvester for Human-Powered
Design Criteria of Urban Drainage Infrastructures under Climate Change
Design and synthesis of photostable multi-shell Cd-free nanocrystal quantum dots for LED applications
Design and experimental investigation of highly efficient resonance-domain diffraction gratings in the visible spectral region
Designer probiotics: a potential therapeutic for Clostridium difficile?
Design, synthesis and pharmacobiological evaluation of novel acrylic acid derivatives acting as lipoxygenase and cyclooxygenase-1 inhibitors with antioxidant and anti-inflammatory activities
Design, synthesis and anti-ulcerogenic effect of some of furo-salicylic acid derivatives on acetic acid-induced ulcerative colitis
Design of a broadband high-efficiency two-port beam subwavelength grating splitter by modal method
Design of a Dual-Band High-Gain Antenna Array for WLAN and WiMAX Base Station
Design and Control Concept for Reconfigurable Architecture
Design of photocontrolled biomolecules based on azobenzene derivatives
Design and characterization of a Raman-scattering-based sensor system for temporally resolved gas analysis and its application in a gas turbine power plant
Design and Evaluation of Microemulsion Gel System of Nadifloxacin
Design and test results of the AMS RICH detector
Design of Bimodal PCL and PCL-HA Nanocomposite Scaffolds by Two Step Depressurization During Solid-state Supercritical CO2 Foaming
Design criterion for high-speed low-power SC circuits
Designing robust rapid transit networks with alternative routes
Design of vertically stacked waveguide filters in LTCC
Designing Nanoconjugates to Effectively Target Pancreatic Cancer Cells In Vitro and In Vivo
Design of a compact static Fourier transform spectrometer in integrated optics based on a leaky loop structure
Designing the colour of photonic crystals for sensors applications
Design and Synthesis of Multifunctional Gold Nanoparticles Bearing Tumor-Associated Glycopeptide Antigens as Potential Cancer Vaccines
Design, synthesis and SAR of novel ethylenediamine and phenylenediamine derivatives as factor Xa inhibitors
Design principles and action of molecular logic gates
Design modification supporting method based on product usage data in closed-loop PLM
Design of responsive double-hydrophilic A-b-(B-co-C) diblock terpolymers with tunable thermosensitivity
Designed Organo-Layered Silicates as Nanoreactors for 1,3-Butadiene Stereospecific Polymerization Toward Rubber Nanocomposites Synthesis
Design and performance of a flow-through polarization-modulation infrared reflection-absorption spectroscopy cell for time-resolved simultaneous surface and liquid phase detection under concentration and temperature perturbations
Design of tensegrity structures for supporting deployable mesh antennas
Design and fabrication of a metamaterial gradient index diffraction grating at infrared wavelengths
Design and kinematic analysis of 3PSS-1S wrist for needle insertion guidance
Design and Implementation of a Hybrid Fuzzy Logic Controller for a Quadrotor VTOL Vehicle
Design, development, and evaluation of a master-slave surgical system for breast biopsy under continuous MRI
Design and synthesis of human immunodeficiency virus entry inhibitors: Sulfonamide as an isostere for the alpha-ketoamide group
Designing ambient particulate matter monitoring program for source apportionment study by receptor modeling
Design and development of paclitaxel-loaded bovine serum albumin nanoparticles for brain targeting
Design of interval type-2 fuzzy sliding-mode controller
Design and characterization of cellulose nanofibril-based freestanding films prepared by layer-by-layer deposition technique
Design and comparative analysis of high power led with fluorescent lamp in laboratory lighting systems
Design Principles for Visual Communication
Design and Analysis of Ultrafast and Tunable All Optical Metamaterial Switch Enhanced by Metal Nanocomposite
Design of a multimodal strategy including health marketing for the improvement of hand hygiene fulfillment
Designing ordered nanoarrays from aqueous solutions
Design of Monolithic Rectangular Cavity of 30-cm Length
Designing a consumer products retail chain inventory replenishment policy with the consideration of transportation costs
Design, synthesis, and biological evaluation of novel 4-hydroxypyrone derivatives as HIV-1 protease inhibitors
Design and operation of a compact microchannel 5 kW(el,net) methanol steam reformer with novel Pt/In2O3 catalyst for fuel cell applications
Designing optical elements from isotropic materials by using transformation optics
Design and Test of a High-Power High-Efficiency Loosely Coupled Planar Wireless Power Transfer System
Design and in vitro characterization of PAC1/VPAC1-selective agonists with potent neuroprotective effects
Design and development of a piezoelectric actuator for the scanning probe microscope used in ultrahigh vacuum
Design of carbon nanotubes for large-area electron field-emission cathodes
Design of a secure distance-bounding channel for RFID
Design of small auxetic springs for furniture
Designing the plasmonic response of shell nanoparticles: Spectral representation
Design, synthesis and pharmacological evaluation of chalcone derivatives as acetylcholinesterase inhibitors
Design, modeling, and expression of erythropoietin cysteine analogs in Pichia pastoris: Improvement of mean residence times and in vivo activities through cysteine-specific PEGylation
Design and Potentiality of an Apparatus for Measuring Yarn/Yarn and Fabric/Fabric Friction
Design of an Adaptive Wideband Beamforming Algorithm for Conformal Arrays
Design and characterization of a thermal hydrogen atom source
Designer dendrimers: Branched oligosulfonimides with controllable molecular architectures
Design of an optimal tuned mass damper for a system with parametric uncertainty
Design and mechanical characterization of a Zr-Nb-O-P alloy
Design and validation of SSR microsatellite primers for castor bean
Design, fabrication and testing of sandwich coupled inductors
Designing porous silicon-based microparticles as carriers for controlled delivery of mitoxantrone dihydrochloride
Design strategies for organic semiconductors beyond the molecular formula
Designing 1D grating for extraordinary optical transmission for TM polarization
Design of DNA Pooling to Allow Incorporation of Covariates in Rare Variants Analysis
Design of diethynyl porphyrin derivatives with high near infrared fluorescence quantum yields
Design of shot nailed steel sheeting connection at ambient and elevated temperatures
Design and characterization of a plasmid vector system capable of rapid generation of antibodies of multiple isotypes and specificities
Design of double-passed arrayed-waveguide gratings for the generation of flat-topped femtosecond pulse trains
Design of highly electrocatalytically active carbon sphere chains/Au architectures
Design of Binary Multiple Level Sequences
Design and Characterization of Modular Scaffolds for Tubulin Assembly
Design and Analysis of Optimal Random Access Policies in Cognitive Radio Networks
Design and synthesis of bioactive adamantanaminoalcohols and adamantanamines
Design, synthesis, and evaluation of novel small molecule inhibitors of the influenza virus protein NS1
Designing the database for a reliability aware Model-Based System Engineering process
Designing polyethylene glycol (PEG) - plasticized membranes of poly(vinyl alcohol-g-methyl methacrylate) and investigation of water sorption and blood compatibility behaviors
Design of Optimized Multilayer PIFA With the EBG Structure for SAR Reduction in Mobile Applications
Design and optimization of uniplanar EBG structures
Design of a non-uniform high impedance surface for a low profile antenna
Design of compact dual and high directive electromagnetic bandgap (EBG) resonator antenna using artificial magnetic conductor
Design of a Dual-Band, Compact Yagi Antenna Over an EBG Ground Plane
Design of Planar Artificial Magnetic Conductor Ground Plane Using Frequency-Selective Surfaces for Frequencies Below 1 GHz
Design of a Broadband Dipole in Close Proximity to an EBG Ground Plane
Design and Analysis of a Petri Net Model of the Von Hippel-Lindau (VHL) Tumor Suppressor Interaction Network
Design and Analysis of Successive Decoding With Finite Levels for the Markov Channel
Designing Efficient Azobenzene and Azothiophene Nonlinear Optical Photochromes
Design of Clathrate Compounds that Use Only Weak Intermolecular Attractions
Design and development of gliclazide-loaded chitosan microparticles for oral sustained drug delivery: in-vitro/in-vivo evaluation
Design and development of gliclazide-loaded chitosan for oral sustained drug delivery: In vitro/in vivo evaluation
Design of a versatile chemical assembly method for patterning colloidal nanoparticles
Design and critical evaluation of improved electrothermal vaporization flame atomic absorption/emission spectrometry for direct determination of trace metals in microliter samples
Design and validation of an oligonucleotide microarray for the detection of genomic rearrangements associated with common hereditary cancer syndromes
Design and operation of pilot plant for CO2 capture from IGCC flue gases by combined cryogenic and hydrate method
Design and analysis of dynamic voltage restorer for deep voltage sag and harmonic compensation
Designing salespeople's routes with multiple visits of customers: A case study
Design of wide stopband lowpass filter with sharp roll-off
Design of a Fault-Tolerant Controller Based on Observers for a PMSM Drive
Design, Prototyping, and Analysis of a Novel Permanent-Magnet Doubly Salient Generator
Design Optimization of a Surface-Mounted Permanent-Magnet Motor With Concentrated Windings for Electric Vehicle Applications
Design, fabrication, and testing of fiber Bragg grating sensors for cryogenic long-range displacement measurement
Design of Soluble Hyperbranched Polythiophenes with Tailor-Made Optoelectronic Properties
Design of Neutral Lewis Superacids of Group 13 Elements
Designing Cu-Zr Glass Using Multiobjective Genetic Algorithm and Evolutionary Neural Network Metamodels-Based Classical Molecular Dynamics Simulation
Design, Analysis and Evaluation of A New Energy Conserving MAC Protocol for Wireless Sensor Networks
Design of Polydiacetylene-Phospholipid Supramolecules for Enhanced Stability and Sensitivity
Design of multifunctionalized mesoporous silicas for esterification of fatty acid
Designing machine operating strategy with simulated annealing and Monte Carlo simulation
Design and verification of long-running transactions in a timed framework
Design, Synthesis and Anticancer Activity Evaluation of Some Novel Pyrrolo[1,2-a]azepine Derivatives
Designing parallel loop self-scheduling schemes using the hybrid MPI and OpenMP programming model for multi-core grid systems
Design strategies of tissue engineering scaffolds with controlled fiber orientation
Designed Chemical Intervention with Thiols for Prophylactic Contraception
Design and synthesis of iridium(III) azacrown complex: application as a highly sensitive metal cation phosphorescence sensor
Design principles for optical molecular sensors and photocontrolled receptors based on crown ethers
Design Considerations for Multilevel CMOS/Nano Memristive Memory
Desipramine induces apoptotic cell death through nonmitochondrial and mitochondrial pathways in different types of human colon carcinoma cells
Design of ICT-PET fluorescent probes for zinc(II) based on 5-aryl-2,2 '-bipyridines
Design and Synthesis of a Chemiluminescent Solvatochromic Dye
Design, synthesis and evaluation of non-urea inhibitors of soluble epoxide hydrolase
Design of a pressure control system with dead band and time delay
Design and validation of a novel learning tool, the "Anato-Rug," for teaching equine topographical anatomy
Design and development of solid lipid nanoparticles for topical delivery of an anti-fungal agent
Design of Fluorine-Containing 3,4-Diarylfuran-2(5H)-ones as Selective COX-1 Inhibitors
Design strategy of enediynes and enyne-allenes
Design of a real-time spectroscopic rotating compensator ellipsometer without systematic errors
Designer multi-functional comb-polymers for surface engineering of quantum dots on the nanoscale
Design of interpenetrated network MWCNT/poly(1,5-DAN) on interdigital electrode: Toward NO2 gas sensing
Design, Synthesis, and Antiviral Evaluation of Purine-beta-lactam and Purine-aminopropanol Hybrids
Design of Neutral Metallomesogens from 5,5-Dimethyldipyrromethane: Metal Ion Mediated Control of Folding and Hairpin Structures
Design and properties of hybrid organic-inorganic nanocomposites for photonics
Design of a novel sort of luminescent terbium(III) hybrid materials with potential molecular bridge
Design of global supply chain network with operational risks
Design of Zeolites with Specific Architectures Using Self-Assembled Aromatic Organic Structure Directing Agents
Design for environment: The greening of product and supply chain
Design rules for electrode arrangement in an air-breathing alkaline direct methanol laminar flow fuel cell
Design and simulation of a novel electro-thermally actuated lateral RF MEMS latching switch for low power applications
Design, synthesis, and SAR analysis of cytotoxic sinapyl alcohol derivatives
Design, synthesis and in vitro characterization of novel hybrid peptidomimetic inhibitors of STAT3 protein
Designability of protein structures on the hexagonal lattice model
Designability and thermal stability of protein structures
Design and Testing of a Convenient Benchtop Sandbox for Controlled Flow Experiments
Design and synthesis of anthracene-based bispyridinium amides: anion binding, cell staining and DNA interaction studies
Design of polymeric nanoparticles for biomedical delivery applications
Design and synthesis of boronic-acid-labeled thymidine triphosphate for incorporation into DNA (vol 35, pg 1222, 2007)
Design of a multi-signature ensemble classifier predicting neuroblastoma patients%26apos; outcome
Design of a deflected membrane electrode assembly for PEMFCs
Design for geometric parameters of PEM fuel cell by integrating computational fluid dynamics code with optimization method
Design and Optical Trapping of a Biocompatible Propeller-like Nanoscale Hybrid
Design of Pre-Rake DS-UWB Downlink with Pre-Equalization
Design, synthesis, and characterization of fullerene-peptide-steroid covalent hybrids
Designing a Policy Mix and Sequence for Mitigating Agricultural Non-Point Source Pollution in a Water Supply Catchment
Design and in vitro characterization of buccoadhesive tablets of timolol maleate
Design, optimization and manufacturing of wood-plastic composite pallet
Design of Planar Complex Impedance Transformers With the Modified Coupled Line
Design and implementation of algorithms for focus automation in digital imaging time-lapse microscopy
Design, Manufacturing, and Characterization of High-Performance Lightweight Bipolar Plates Based on Carbon Nanotube-Exfoliated Graphite Nanoplatelet Hybrid Nanocomposites
Design, simulation and fabrication of a total internal reflection (TIR)-based chip for highly sensitive fluorescent imaging
Design, Synthesis and Characterization of Coordination Polymer from [Cu(DMF)(4)(SCN)(2)] as a Precursor
Design of polymeric nanoparticles and its applications as drug delivery systems for acne treatment
Design, Synthesis, and Characterization of Self-assembled Peptide Nanostructures toward Peptide-directed Biomineralization
Design optimization of cutting parameters when turning hardened AISI 4140 steel (63 HRC) with Al2O3+TiCN mixed ceramic tool
Design of supramolecular biomimetic catalysts of high substrate specificity by noncovalent self-assembly of calix[4]arenes with amphiphilic and polymeric amines
Design of Dual-Band MIMO Antenna with High Isolation for WLAN Mobile Terminal
Designing a bipolar host material for blue phosphorescent OLEDs: Phenoxy-carbazole substituted triazine
Design of elliptical electromagnetic bandgap structures for directive antennas
Design of bioavailable derivatives of 12-(3-adamantan-1-yl-ureido)dodecanoic acid, a potent inhibitor of the soluble epoxide hydrolase
Design and Synthesis of Dual Modulators of Soluble Epoxide Hydrolase and Peroxisome Proliferator-Activated Receptors
Design strength of axially loaded RC columns strengthened by steel caging
Designer Peptides: Learning from Nature
Design and characterization of nanoporous polymeric materials via reactive encapsulation of a chemically inert solvent
Designing heart performance by gene transfer
Design and properties of biopolymer-silica hybrid materials: The example of pectin-based biodegradable hydrogels
Design and Development of High-Velocity Slurry Erosion Test Rig Using CFD
Design of bimetallic magnetic chains based on oxalate complexes: towards single chain magnets
Design of wavelength selective concentrator for micro PV/TPV systems using evolutionary algorithm
Designing of thermally stable amide functionalized benzimidazolium perchlorate ionic liquid for transamidation of primary carboxamides
Design of adaptive sliding mode controller for chaos synchronization with uncertainties
Design of Highly Stabilized beta-Hairpin Peptides through Cation-pi Interactions of Lysine and N-Methyllysine with an Aromatic Pockets
Design of PLGA Based Nanoparticles for Imaging Guided Applications
Design of a microfluidic platform for monoclonal antibody extraction using an aqueous two-phase system
Design and mechanism of iron catalyzed carbon-carbon bond cleavage and N-oxidation processes of hazardous dyes for selective synthesis of nitroarenes and aminoarenecarboxylic acids
Design of vibration isolators by exploiting the beneficial effects of stiffness and damping nonlinearities
Design Guidelines for Training-Based MIMO Systems With Feedback
Design and Synthesis of a Novel Series of Pyranonaphthoquinones as Topoisomerase II Catalytic Inhibitors
Design of carborane molecular architectures with electronic structure computations: From endohedral and polyradical systems to multidimensional networks
Design of a chaotic neural network for training and retrieval of grayscale and binary patterns
Design of single chain magnets through cyanide-bearing six-coordinate complexes
Design and evaluation of a thorium(IV) selective optode
Design, synthesis, and crystallographic studies of neutral platinum-based macrocycles formed via self-assembly
Design, synthesis and photoelectrochemical properties of hexagonal metallomacrocycles based on triphenylamine: [M-6(4,4 '-bis(2,2 ': 6 ',2 ''-terpyridinyl)triphenylamine)(6)(X)(12)]; [M = Fe(II), PF6- and Zn(II), BF4-]
Design, analysis, visualisation and manipulation for adaptive assembly based nanomanufacturing
Design of experiments to evaluate clay swelling inhibition by different combinations of organic compounds and inorganic salts for application in water base drilling fluids
Design of magneto-rheological (MR) valve
Design, development, and performance evaluation of high-speed magnetorheological brakes
Design and application of magneto-rheological fluid
Design and implementation of a low cost, high yield dielectric barrier discharge ozone generator based on the single switch resonant converter
Design of Kaiser window based optimized prototype filter for cosine modulated filter banks
Designing sequence with low sidelobe levels at specified intervals based on PSD fitting
Design of a recessed-gate GaN-based MOSFET using a dual gate dielectric for high-power applications
Design, solid phase synthesis and evaluation of cationic ferrocenoyl peptide bioconjugates as potential antioxidant enzyme mimics
Design, synthesis and biological evaluation of new ionone derivatives as potential neuroprotective agents in cerebral ischemia
Design of a Scroll Vortex Inlet for Supercritical Approach Flow
Design of Vesicles Using Capillary Microfluidic Devices: From Magnetic to Multifunctional Vesicles
Design of a relaying electroosmosis pump driven by low-voltage DC
Design and measurement-based evaluations of coherent JT CoMP: a study of precoding, user grouping and resource allocation using predicted CSI
Designing materials by means of the cavity-microelectrode: the introduction of the quantitative rapid screening toward a highly efficient catalyst for water oxidation
Design and Synthesis of 3-Carbamoylbenzoic Acid Derivatives as Inhibitors of Human Apurinic/Apyrimidinic Endonuclease 1 (APE1)
Design and operation of a versatile, ultrahigh vacuum, low temperature scanning probe microscope
Design, synthesis, and characterization of bent-core mesogen-jacketed liquid crystalline polymers
Design and development of artificial neural networks for depositing powders in coating treatment
Design of lanthanide complex probes for highly sensitive time-resolved fluorometric detection methods and its application to biochemical, environmental and clinical analyses
Designing selective sites in templated polymers utilizing coordinative bonds
Design and synthesis of novel cytotoxic agents based on combined framework of quinoline and nimesulide
Design and Synthesis of Indomethacin Analogues That Inhibit P-Glycoprotein and/or Multidrug Resistant Protein without Cox Inhibitory Activity
Design and evaluation of photometric image quality measures for effective face recognition
Design of Efficient Am bipolar Host Materials for Organic Blue Electrophosphorescence: Theoretical Characterization of Hosts Based on Carbazole Derivatives
Design and characterization of a functional library for NMR screening against novel protein targets
Design and dynamic characterization of "single-stroke" peristaltic PDMS micropumps
Designing simulated annealing and subtractive clustering based fuzzy classifier
Design, construction and performance testing of a new system for energy saving in rural buildings
Design, Synthesis, and Evaluation of Novel Fluoroquinolone-Aminoglycoside Hybrid Antibiotics
Design of cumulative sum schemes for start-up processes and short runs
Design and fabrication of a nanostructured surface combining antireflective and enhanced-hydrophobic effects
Design of harmonic noise frequency filtering down-converter with asymmetrical inductance tank in InGaP/GaAs HBT technology
Design of protein switches based on an ensemble model of allostery
Design and Realization of a Linear Magnetic Gear
Design and efficient production of bovine enterokinase light chain with higher specificity in E. coli
Design, synthesis, structural and nonlinear optical properties of photochromic crystals: Toward reversible molecular switches
Design and Characterization of Molecular Nonlinear Optical Switches
Design of graphene electronic devices using nanoribbons of different widths
Design and Implementation of a Novel Magnetic Bevel Gear
Design of a dual sensing highly selective cyanide chemodosimeter based on pyridinium ring chemistry
Design Rules for Raman Lasers Based on SOI Racetrack Resonators
Design of hydrophobic polyoxometalate hybrid assemblies beyond surfactant encapsulation
Design and convergence analysis of stochastic frequency estimator using contraction theory
Design of Ionic Liquid-Derived Polyelectrolyte Gels Toward Reversible Water Absorption/Desorption System Driven by Small Temperature Change
Desiccation as a Long-Term Survival Mechanism for the Archaeon Methanosarcina barkeri
Design of a slot-coater-based layered-composites manufacturing system
Design and synthesis of lupeol analogues and their in vitro PTP-1B inhibitory activity
Design and performance evaluation of a lightweight wireless early warning intrusion detection prototype
Design of high-bandwidth high-precision flexure-based nanopositioning modules
Designed solvent-free approach toward organometallic networks built on directional metal-pi-arene interactions
Design of vaccine adjuvants incorporating TNF superfamily ligands and TNF superfamily molecular mimics
Design and Synthesis of Imidazo[2,1-b]thiazole-Chalcone Conjugates: Microtubule-Destabilizing Agents
Designing bovine T cell vaccines via reverse immunology
Design and Synthesis of Ultralow Energy Spin-Memristor Threshold Logic
Designing peptide based nanomaterials
Design of an optical sensor for indirect determination of isoniazid
Design, synthesis and biological evaluation of piperic acid triazolyl derivatives as potent anti-inflammatory agents
Designing for Automatic Affect Inference in Learning Environments
Design, fabrication and testing of a silicon-based air-breathing micro direct methanol fuel cell
Design of a novel MDM2 binding peptide based on the p53 family
Design, synthesis and in vitro antitumour activity of new heteroaryl ethylenes
Design and Synthesis of Lamellarin D Analogues Targeting Topoisomerase I
Design of silver(I)-heteropolyacids: toward the molecular control of reactivity in organic chemistry
Designing of molecular architecture, synthesis and properties of the next generation of state-of-the-art high-performance thermoplastic fluoro-poly(ether amide)s, (6F-PEA), fluoro-poly(ether amide-imide)s (6F-PEAI), and their co-polymers
Designing an ultrathin silica layer for highly durable carbon nanofibers as the carbon support in polymer electrolyte fuel cells
Design of an all-optical NOT XOR gate based on cross-polarization modulation in a semiconductor optical amplifier
Design and current status of CONTINT: continuous versus interrupted abdominal wall closure after emergency midline laparotomy - a randomized controlled multicenter trial [NCT00544583]
Design and testing of a microfluidic biochip for cytokine enzyme-linked immunosorbent assay
Design of Stable Visual Servoing Under Sensor and Actuator Constraints via a Lyapunov-Based Approach
Design and implementation of robust visual servoing control of an inverted pendulum with an FPGA-based image co-processor
Design and analysis of a denial-of-service-resistant quality-of-service signaling protocol for MANETs
Design guidelines for quality of service support in Optimized Link State Routing-based mobile ad hoc networks
Design of a chimeric DNA vaccine against Brucella spp.
Design of crystal packings of styrylheterocycles and [2+2] photocycloaddition reactions in their single crystals 7. Crystal structures of 4-styrylpyridine hydroperchlorates and solid-state [2+2] autophotocycloaddition reactions of these compounds
Design of beta-Amino Acid with Backbone-Side Chain Interactions: Stabilization of 14/15-Helix in alpha/beta-Peptides
Design and synthesis of thioether-imidazolium chlorides as efficient ligands for palladium-catalyzed Suzuki-Miyaura coupling of aryl bromides with arylboronic acids
Design of a large measurement-volume metrological atomic force microscope (AFM)
Design and delivery of antisense oligonucleotides to block microRNA function in cultured Drosophila and human cells
Design and Development of Intracavity Optical Parametric Oscillator-based Eye Safe Laser Operating at 20 Hz without Forced Air Cooling
Design and construction of a traveling wave thermoacoustic refrigerator
Design and development of a novel pH triggered nanoemulsified in-situ ophthalmic gel of fluconazole: Ex-vivo transcorneal permeation, corneal toxicity and irritation testing
Design and fabrication of a new two-dimensional pneumatic micro-conveyor
Design and synthesis of a reagent for solid-phase incorporation of the phosphothreonine mimetic (2S,3R)-2-amino-3-methyl-4-phosphonobutyric acid (Pmab) into peptides in a bio-reversible phosphonyl-bis-pivaloyloxymethyl (POM) prodrug form
Designing a reverse logistics network for optimal collection, recovery and quality-based product-mix planning
Design and synthesis of mono-molecular machines
Design and Validation of a Questionnaire Exploring Risky-driving Patterns in Young Drivers
Designing a Highly Efficient Chemical Chaperone System Using Chitosan-Coated Alginate
Design and controlled emission properties of bioorganometallic compounds composed of uracils and organoplatinum(II) moieties
Design and Implementation of an Intelligent Maximum Power Point Tracking Controller for Photovoltaic Systems
Designing for pedestrian comfort in response to local climate
Design, synthesis, and evaluation of a new generation of modular nucleophilic glycine equivalents for the efficient synthesis of sterically constrained alpha-amino acids
Design of a Digitized Vibration Detector Implemented by CMOS Digitized Capacitive Transducer With In-Plane SoI Accelerometer
Desilication: on the controlled generation of mesoporosity in MFI zeolites
Design & fabrication of cantilever array biosensors
Design, Synthesis, and Preliminary Biological Evaluation of New Isoform-Selective f-Current Blockers
Designer fruits and vegetables with enriched phytochemicals for human health
Design of eco-efficient grouts intended for soil nailing
Design Analysis of a Dual Frequency RFID Reader Antenna
Design, Synthesis and Cytotoxicity of Chalcone Analogs Derived from 2-Phenylimino-3-phenylthiazolidin-4-one
Design and production of nanoparticles formulated from nano-emulsion templates - A review
Design and fabrication of an imprinted wavelength-independent coupler
Design principles underpinning the regulatory diversity of protein kinases
Designability of alpha-helical proteins
Design, Synthesis, and Biological Activities of Some Branched Carbasugars: Construction of a Substituted 6-Oxabicyclo[3.2.1]nonane Skeleton
Design and analysis of a high-power radial multi-way combiner
Design and Implementation of a Nine-Axis Inertial Measurement Unit
Design and performance of a thermosiphon heat recovery system
Design and Rationale of the Study of Assessment for Kidney Function by Urinary Microalbumin in Randomized (SAKURA) Trial
Design, synthesis and anticancer mechanistic studies of linked azoles
Design of a photonic crystal differential phase comparator for a Mach-Zehnder switch
Design of tomato fruits with reduced allergenicity by dsRNAi-mediated inhibition of ns-LTP (Lyc e 3) expression
Designing molecular architecture to control diffusion and adsorption on insulating surfaces
Designing of a Si-MEMS device with an integrated skeletal muscle cell-based bio-actuator
Design of a linear poly(3-hexylthiophene)/fullerene-based donor-acceptor rod-coil mock copolymer
Design and synthesis of a low band gap conjugated macroinitiator: Toward rod-coil donor-acceptor block copolymers
Design of a Carbonic Anhydrase IX Active-Site Mimic To Screen Inhibitors for Possible Anticancer Properties
Design and synthesis of novel DOTA(Gd3+)-polymer conjugates as potential MRI contrast agents
Design and Manufacture of Injection Mold Inserts Using Electron Beam Melting
Designing HVAC systems using particle swarm optimization
Design of a Semiactive Battery-Ultracapacitor Hybrid Energy Source
Designing modular lattice systems with chiral space groups
Design of a feedback system to stabilise instabilities by ECRH using a combined ECW launcher and ECE receiver
Design, synthesis, and evaluation of inhibitors for severe acute respiratory syndrome 3C-like protease based on phthalhydrazide ketones or heteroaromatic esters
Design, construction, and installation of large drainage lysimeters for water quantity and quality studies
Design, synthesis, and antiviral activity of new 1H-1,2,3-triazole nucleoside ribavirin analogs
Design and planning for green global supply chains under periodic review replenishment policies
Design and properties of co-continuous nanostructured polymers by reactive blending
Design Parameters for a Robust Superhydrophobic Electrospun Nonwoven Mat
Design of polyacene-based negative electrode for polymeric gel electrolytes
Designed armadillo repeat proteins as general peptide-binding scaffolds: Consensus design and computational optimization of the hydrophobic core
Designed Armadillo Repeat Proteins: Library Generation, Characterization and Selection of Peptide Binders with High Specificity
Design and Benefit-Cost Analysis of Deploying Freeway Incident Response Units Case Study for Capital Beltway in Maryland
Design, Synthesis and Characterization of an Acid-Responsive Dispersant for Carbon Nanotubes
Design of laser-coupled honeycomb optical lattices supporting Chern insulators
Design and photophysical properties of a new molecule with a N-B-N linked chromophore
Design and characterization of a protein superagonist of IL-15 fused with IL-15Ra and a high-affinity T cell receptor
Designing transient binding drugs: A new concept for drug discovery
Design of holographic polymer-dispersed liquid crystals based on solubility parameters
Design and Implementation of a Delay-Guaranteed Motor Drive for Precision Motion Control
Design and In Vitro Evaluation of Solid-Lipid Nanoparticle Drug Delivery for Aceclofenac
Designing photosensitizers for photodynamic therapy: strategies, challenges and promising developments
Designer Curvature
Design, synthesis, and bioavailability evaluation of coumarin-based prodrug of meptazinol
Design of a CO preferential oxidation reactor for PEFC systems: A modelling approach
Design and Test of a Superconducting Magnetic Energy Storage (SMES) Coil
Design of efficient packing system using genetic algorithm based on hyper heuristic approach
Design, structural elucidation, DNA interaction and antimicrobial activities of metal complexes containing tetraazamacrocyclic Schiff bases
Design and synthesis of a series of novel mesogen-jacketed liquid crystal polymers
Design and x-ray crystal structures of high-potency nonsteroidal glucocorticoid agonists exploiting a novel binding site on the receptor
Design, Synthesis, and Local Anti-Inflammatory Activity of 17 beta-Carboxamide Derivatives of Glucocorticoids
Designing better drugs: predicting cytochrome P450 metabolism
Design of Antimicrobially Active Small Amphiphilic Peptide Dendrimers
Design of super-elastic biodegradable scaffolds with longitudinally oriented microchannels and optimization of the channel size for Schwann cell migration
Design of Chipless RFID Tags Printed on Paper by Flexography
Design and Selection of Toca 511 for Clinical Use: Modified Retroviral Replicating Vector With Improved Stability and Gene Expression
Design of Functionalized Cellulosic Honeycomb Films: Site-Specific Biomolecule Modification via "Click Chemistry"
Designing 3-D Molecular Stars
Design of sliding mode controller for UPFC to improve power oscillation damping
Design of common heat exchanger network for batch processes
Design of WDM-RoF-PON Based on Improved OFDM Mechanism and Optical Coherent Technology
Design, synthesis and biological evaluation of novel quinazoline derivatives as potential anti-cancer agents
Design and preparation of polymeric scaffolds for tissue engineering
Design and synthesis of a new pH sensitive polymeric sensor using fluorescence resonance energy transfer
Designing highly specific biosensing surfaces using aptamer monolayers on gold
Design of Event-Triggered Control for Networked Systems with Communication Constraints
Design, testing, and FEM simulation of interlaced fiber composite structures
Designing Thin Film-Capped Metallic Nanoparticles Configurations for Sensing Applications
Design of good low-rate coding schemes for ISI channels based on spectral shaping
Design and analysis of nonbinary LDPC codes for arbitrary discrete-memoryless channels
Design, implementation, and application of a microresonator platform for measuring energy dissipation by internal friction in nanowires
Design of Bisphosphonate-Terminated Dendrimers
Designing Heusler nanoprecipitates by elastic misfit stabilization in Fe-Mn maraging steels
Designing Silk-silk Protein Alloy Materials for Biomedical Applications
Design and Formulation Technique of a Novel Drug Delivery System for Azithromycin and its Anti-Bacterial Activity Against Staphylococcus aureus (Retracted article. See vol. 15, pg. 511, 2014)
Designing Surfaces with Wettability That Varies in Response to Solute Identity and Concentration
Design, synthesis, and discovery of novel non-peptide inhibitor of Caspase-3 using ligand based and structure based virtual screening approach
Designing representative task constraints for studying visual anticipation in fast ball sports: What we can learn from past and contemporary insights in neurobiology and psychology
Design of Ultra-wideband Low-Noise Amplifiers in 45-nm CMOS Technology: Comparison Between Planar Bulk and SOI FinFET Devices
Designing Bioactive Delivery Systems for Tissue Regeneration
Design and Implementation of a Ubiquitous Robotic Space
Design of Quantum Dot-Conjugated Lipids for Long-Term, High-Speed Tracking Experiments on Cell Surfaces
Design of Dipicolinic Acid Ligands for the Two-Photon Sensitized Luminescence of Europium Complexes with Optimized Cross-Sections
Design of CD40 Agonists and Their Use in Growing B Cells for Cancer Immunotherapy
Design of a short tensile coupon for fiber reinforced plastic using artificial neural networks
Design and analysis of a composite beam for infrastructure applications - Part II: Preliminary investigation in shear and torsion
Design of distributed amplify-and-forward relay networks for multi-input multi-output transmission
Design of a highly stable, high-conversion-efficiency, optical parametric chirped-pulse amplification system with good beam quality
Design and characteristics of a broadband Cr : Forsterite optical parametric chirped pulse amplifier at kHz repetition rates
Design optimization of flattop interleaver and its dispersion compensation
Design and Control for High-Speed Nanopositioning SERIAL-KINEMATIC NANOPOSITIONERS AND REPETITIVE CONTROL FOR NANOFABRICATION
Design principles to tune the optical properties of 1,3,4-oxadiazole-containing molecules
Design considerations in a sib-pair study of linkage for susceptibility loci in cancer
Design and development of the ANAEROCHIP microarray for investigation of methanogenic communities
Design, synthesis and characterization of novel small molecular inhibitors of ephrin-B2 binding to EphB4
Design of a low-temperature plasma (LTP) probe with adjustable output temperature and variable beam diameter for the direct detection of organic molecules
Designing optimal long-period fiber gratings with the overlapped Gaussian-apodization method for flattening EDFA gain spectra
Designing immunogens to elicit broadly neutralizing antibodies to the HIV-1 envelope glycoprotein
Design Management in Small- and Medium-Sized Mexican Enterprises
Design and implementation of all MOS micro-power voltage reference circuit
Design evaluation of a French refrigerator drawer system subjected to repeated food storage loads
Design and synthesis of potent and selective P2X(3) receptor antagonists derived from PPADS as potential pain modulators
Design of phosphonium ended dendrimers bearing functionalized amines
Design Procedure to Minimize Power Consumption and Latency in WSAN
Design of Novel Binuclear Phthalocyanines formed by Dioxyphenyl Bridges: Synthesis and Investigation of Thermal and Antioxidant Properties
Design and development of a highly stable hydrogen peroxide biosensor on screen printed carbon electrode based on horseradish peroxidase bound with gold nanoparticles in the matrix of chitosan
Designing of nanostructured hollow TiO2 spheres obtained by ultrasonic spray pyrolysis
Design and analysis of an fMRI compatible haptic robot
Design of photonic band gap nanocavities for stimulated Raman amplification and lasing in monolithic silicon
Design of second-order Nonlinear optical molecules exhibiting improved nonlinearity-transparency trade-off and large nonlinearity
Design of an Imipramine-Selective Electrode Based on an Ion-Pair and its Application to Pharmaceutical Analysis
Design of the REVEAL registry for US patients with pulmonary arterial hypertension
Design and construction of Alborz tokamak vacuum vessel system
Design of Organic Semiconductors from Molecular Electrostatics
Design and Evaluation of a Passive Alcove-Based Microfluidic Mixer
Design and implementation of a sub-nm resolution microspectrometer based on a Linear-Variable Optical Filter
Design and Performance of a 600-720-GHz Sideband-Separating Receiver Using AlOx and AlN SIS Junctions
Design and Modeling of a Stopband-Enhanced EBG Structure Using Ground Surface Perturbation Lattice for Power/Ground Noise Suppression
Design of allele-specific primers and detection of the human ABO genotyping to avoid the pseudopositive problem
Design and optimization of artemether microparticles for bitter taste masking
Design and optimization of mefloquine hydrochloride microparticles for bitter taste masking
Design of artificial neural networks for distribution feeder loss analysis
Design and Analysis of Down-Conversion Gate/Base-Pumped Harmonic Mixers Using Novel Reduced-Size 180 degrees Hybrid With Different Input Frequencies
Design of non-balanced cross-coupled oscillators with no matching requirements
Design of fiber Bragg grating-based Fabry-Perot sensor for simultaneous measurement of humidity and temperature
Designing materials to direct stem-cell fate
Design and Fabrication of Broadband Hybrid GaAs Schottky Diode Frequency Multipliers
Designing Microarray and RNA-Seq Experiments for Greater Systems Biology Discovery in Modern Plant Genomics
Design of LNA-modified siRNAs against the highly structured 5 ' UTR of coxsackievirus B3
Design and synthesis of fluorescent probe for high-sensitivity protein detection based on merocyanine structure and application to rapid electrophoretic gel stain
Design of an ultra-compact electro-absorption modulator comprised of a deposited TiN/HfO2/ITO/Cu stack for CMOS backend integration
Design and in vivo evaluation of solid-in-oil suspension for oral delivery of human growth hormone
Designing Gelatin Nanocarriers as a Swellable System for Controlled Release of Insulin: An In-Vitro Kinetic Study
Design and fabrication of polarization-holographic elements for laser beam shaping
Design of Dinuclear Copper Species with Carboranylcarboxylate Ligands: Study of Their Steric and Electronic Effects
Design of a system to measure light scattering from individual cells excited by an acoustic wave
Design of biologically active heparan sulfate and heparin using an enzyme-based approach
Designing a SAR-Based All-Digital Delay-Locked Loop With Constant Acquisition Cycles Using a Resettable Delay Line
Design and implementation of a 2.8-dB insertion loss v-band bandpass filter in 0.13-mu m cmos technology
Design principle of multi-cluster and desynchronized states in oscillatory media via nonlinear global feedback
Design and initial operation of a two-color soft x-ray camera system on the Compact Toroidal Hybrid experiment
Design of compliant mechanism using hyper radial basis function network and reanalysis formulation
Design of sustainable supply chains under the emission trading scheme
Designing nanomaterial-enhanced electrochemical immunosensors for cancer biomarker proteins
Design of a Cytochrome P450BM3 Reaction System Linked by Two-Step Cofactor Regeneration Catalyzed by a Soluble Transhydrogenase and Glycerol Dehydrogenase
Design of 5 GHz low-power CMOS LC VCO based on complementary cross-coupled topology with modified tail current-shaping technique
Design and implementation of an automated email notification system for results of tests pending at discharge
Design of a composite biomaterial system for tissue engineering applications
Design principles of photo-bioreactors for cultivation of microalgae
Design of FitFor2 study: the effects of an exercise program on insulin sensitivity and plasma glucose levels in pregnant women at high risk for gestational diabetes
Design and analysis of a first order time-delayed chaotic system
Design and implementation of a 1-V transformer magnetic feedback low-noise amplifier (LNA) at 5-6 GHz, in a 90 nm complementary metal-oxide-semiconductor (CMOS) process
Design-related losses of double-fishnet negative-index photonic metamaterials
Design, synthesis and preliminary pharmacological evaluation of new piperidine and piperazine derivatives as cognition-enhancers
Design, synthesis and nootropic activity of new analogues of sunifiram and sapunifiram, two potent cognition-enhancers
Design, synthesis and preliminary pharmacological evaluation of new analogues of DM232 (unifiram) and DM235 (sunifiram) as cognition modulators
Design Issues for Low Power Integrated Thermal Flow Sensors with Ultra-Wide Dynamic Range and Low Insertion Loss
Design of alpha-Transgiucosidases of Controlled Specificity for Programmed Chemoenzymatic Synthesis of Antigenic Oligosaccharides
Design of Controlled Releasing System: Synthesis of an Amphiphilic Copolymer Endowed with Acid-Labile Side Chains Based on Quaternarization of Amine-Containing Prepolymer with Benzyl Halide Having Acetal Moiety
Design of two molecular methodologies for the rapid identification of Colombian community-acquired methicillin-resistant Staphylococcus aureus isolates
Design of a trial-based economic evaluation on the cost-effectiveness of employability interventions among work disabled employees or employees at risk of work disability: The CASE-study
Design and Implementation of a Robust Current Controller for VSI Connected to the Grid Through an LCL Filter
Design of a Medication Therapy Management Program for Medicare Beneficiaries: Qualitative Findings From Patients and Physicians
Designing the ideal selective estrogen receptor modulator-an achievable goal?
Design and Demonstration of a Fully Integrated Multi-Technology FPGA: A Reconfigurable Architecture for Photonic and Other Multi-Technology Applications
Design and synthesis of BACE-1 inhibitors utilizing a tertiary hydroxyl motif as the transition state mimic
Design considerations in migraine with aura trials: Learning from experience
Design and Applications of Biodegradable Polyester Tissue Scaffolds Based on Endogenous Monomers Found in Human Metabolism
Design, Construction, and Evaluation of Ni-C Eutectic Fixed Points
Design and simulation in GaN based light emitting diodes using focused ion beam generated photonic crystals
Design Method for Circularly Polarized Fabry-Perot Cavity Antennas
Design Method of a Circularly-Polarized Antenna Using Fabry-Perot Cavity Structure
Design of fixed frequency controlled radial-mode stacked disk-type piezoelectric transformers for DC/DC converter applications
Design and performance evaluation of a Double-pass solar drier for drying of red chilli (Capsicum annum L.)
Design of protein crystals in the development of solid biomaterials
Design of Experiment Analysis of the Sulzer Metco DJ High Velocity Oxy-Fuel Coating of Hydroxyapatite for Orthopedic Applications
Design and implementation of a scene-dependent dynamically selfadaptable wavefront coding imaging system
Design and Implementation of an Architectural Framework for Web Portals in a Ubiquitous Pervasive Environment
Design and synthesis of some azole derivatives as potential antimicrobial agents
Design, Validation and Annotation of Transcriptome-Wide Oligonucleotide Probes for the Oligochaete Annelid Eisenia fetida
Designing Polymers to Enable Nanoscale Thermomechanical Data Storage
Design, synthesis, and evaluation of novel ethambutol analogues
Design and Implementation of a New ZVS Interleaved Forward-Flyback Converter Using an Integrated Transformer
Design of digital FIR variable fractional order integrator and differentiator
Designing and testing decision support and energy management systems for smart homes
Design, synthesis and biological evaluation of a novel class of anticancer agents: Anthracenylisoxazole lexitropsin conjugates
Design of SiO2-Al2O3-MoO3 Metathesis Catalysts by Nonhydrolytic Sol-Gel
Design, synthesis and pharmacological evaluation of new series of naphthalenic analogues as melatoninergic (MT1/MT2) and serotoninergic 5-HT2C dual ligands (I)
Designing a supercritical steam cycle to integrate the energy requirements of CO2 amine scrubbing
Designing a home-to-work bus service in a metropolitan area
Design of Biomimetic Cell-Interactive Substrates Using Hyaluronic Acid Hydrogels with Tunable Mechanical Properties
Design and characterization of a polymeric MRI contrast agent based on PVA for in vivo living-cell tracking
Design and Measured Behavior of a Hybrid Precast Concrete Wall Specimen for Seismic Regions
Design and simulation of self-tuning PID-type fuzzy adaptive control for an expert HVAC system
Design and analysis of SSSC-based supplementary damping controller
Design and Control of a Fully Thermally Coupled Distillation Column Modified from a Conventional System
Design and Implementation of a CMOS 4-Bit 12-GS/s Data Acquisition System-on-Chip
Design, structure, and properties of functional metal-ligand inorganic modules
Design space exploration of thermal-aware many-core systems
Design of a Front-End Amplifier for the Maximum Power Delivery and Required Noise by HBMO with Support Vector Microstrip Model
Design, conduct, analysis and reporting of a multi-national placebo-controlled trial of activated protein C for persistent septic shock
Design of Carborane Molecular Architectures via Electronic Structure Computations
Design and application of task administration protocols for collaborative production and service systems
Design and development of a focusing electromagnet for RF linac of a cargo scanner
Design of a novel inherently chiral calix[4]arene for chiral molecular recognition
Design of a Practical and Compact mm-Wave MIMO System with Optimized Capacity and Phased Arrays
Design of a pectin-based microparticle formulation using zinc ions as the cross-linking agent and glutaraldehyde as the hardening agent for colonic-specific delivery of resveratrol: In vitro and in vivo evaluations
Design explorations of performance driven geometry in architectural design using parametric modeling and genetic algorithms
Design and construction of a compact end-station at NSRRC for circular-dichroism spectra in the vacuum-ultraviolet region
Designed Isomorphism of Nifedipine: A Joint Experimental and Molecular Simulation Study with Screened Solvents and Antisolvents
Design and Control of the Side Reactor Configuration for Production of Ethyl Acetate
Design and control of reactive distillation-recovery distillation flowsheet with a decanter for synthesis of N-propyl propionate
Design Aspects of a Novel Topology Air-Cored Permanent Magnet Linear Generator for Direct Drive Wave Energy Converters
Designing for Scale: Development of the ReMotion Knee for Global Emerging Markets
Design of a Nine-Transistor/Two-Magnetic-Tunnel-Junction-Cell-Based Low-Energy Nonvolatile Ternary Content-Addressable Memory
Design of high-efficiency ultrabroadband dielectric gratings
Design of biodegradable hydrogel for the local and sustained delivery of angiogenic plasmid DNA
Design of Stochastic Distribution Networks Using Lagrangian Relaxation
Design of countercurrent separation of Ginkgo biloba terpene lactones by nuclear magnetic resonance
Design and evaluation of novel 8-oxo-pyridopyrimidine Jak1/2 inhibitors
Design of a power piezoelectric transformer for a PFC electronic ballast
Design of microstrip bandpass and lowpass filters using coupling matrix method and a new hairpin defected ground structure
Designing a developed model for assessing the disaster induced vulnerability value in educational centers
Design of equidistant and revert type precipitation patterns in reaction-diffusion systems
Design and economical analysis of hybrid PV-wind systems connected to the grid for the intermittent production of hydrogen
Design of a low-Q S-band cavity beam position monitor
Design and evaluation of hydrolytically stable bidentate urea-type stationary phases for hydrophilic interaction chromatography
Design of novel, potent neuraminidase inhibitor for H5N1 avian influenza using molecular docking, multinuclear NMR and DSC methods
Design and Synthesis of Novel Lactate Dehydrogenase A Inhibitors by Fragment-Based Lead Generation
Design, synthesis of new beta-carboline derivatives and their selective anti-HIV-2 activity
Designed Topology and Site-Selective Metal Composition in Tetranuclear [MM '...M ' M] Linear Complexes
Design study for a next generation B factory pixel vertex detector
Design of solder joints for fundamental studies on the effects of electromigration
Design of a fluorescent dye for indicator displacement from cucurbiturils: A macrocycle-responsive fluorescent switch operating through a pK(a) shift
Design and methods for a cluster randomized trial of the Sunless Study: A skin cancer prevention intervention promoting sunless tanning among beach visitors
Design Methodology for a Miniaturized Frequency Selective Surface Using Lumped Reactive Components
Design of Highly Efficient Wideband RF Polar Transmitters Using the Envelope-Tracking Technique
Design and Control of a 1-DOF MRI-Compatible Pneumatically Actuated Robot With Long Transmission Lines
Design and Characterization of Rotational Multicomponent Catalytic Nanomotors
Design details and characterization of all digital closed-loop interferometric fiber optic gyroscope with superluminescent light emitting diode
Designed metamagnetism in CoMnGe1-xPx
Design study of hard X-ray tomography system to obtain a spatial resolution of 100 nm
Design and campaign synthesis of pyridine-based histone deacetylase inhibitors
Design and campaign synthesis of piperidine- and thiazole-based histone deacetylase inhibitors
Design and fabrications of the novel single-mode piezoelectric actuator
Designing Controllable Porosity for Multifunctional Deformable Tissue Scaffolds
Designing pharmacogenetic projects in industry: practical design perspectives from the Industry Pharmacogenomics Working Group
Design of novel 3D gene activated PEG scaffolds with ordered pore structure
Design, synthesis, and biocompatibility of an arginine-based polyester
Design, Implementation, and Psychometric Analysis of a Scoring Instrument for Simulated Pediatric Resuscitation: A Report from the EXPRESS Pediatric Investigators
Design of cascaded oxide thermoelectric generator
Design of 512-bit logic process-based single poly EEPROM IP
Designing non-contiguous orthogonal frequency division multiplexing transceiver based on wavelet transform and removable cyclic prefix for spectrum sharing in cognitive radio systems
Design, development and assessment of control schemes for IDMS in a standardized RTCP-based solution
Design of an electronic instrumentation for measuring repetitive hand movements during computer use to help prevent work related upper extremity disorder
Design of a pseudo-log image transform hardware accelerator in a high-level synthesis-based memory management framework
Design, synthesis and characterization of a novel orange-yellow long-lasting phosphor: Li2SrSiO4:Eu2+, Dy3+
Designing a process of kaolin bleaching in an oxalic acid enriched medium by Aspergillus niger cultivated on biodiesel-derived waste composed of glycerol and fatty acids
Design of 2 X 2 SOI MMI couplers with arbitrary power coupling ratios
Designing spatial correlation of quantum dots: towards self-assembled three-dimensional structures
Design of Analog Pixel Memory for Low Power Application in TFT-LCDs
Design of the Central Pennsylvania Women's Health Study (CePAWHS) Strong Healthy Women Intervention: Improving Preconceptional Health
Design Considerations for Asymmetric Multiple Quantum Well Broad Spectral Width Superluminescent Diodes
Design and field methods for sighting surveys of cetaceans in coastal and riverine habitats
Design principles for phase-splitting behaviour of coupled cellular oscillators: clues from hamsters with 'split' circadian rhythms
Design and preparation of porous polybenzoxazole films using the tert-butoxycarbonyl group as a pore generator and their application for patternable low-k materials
Design and theoretical analysis of throughput enhanced spatial reuse distributed coordination function for IEEE 802.11
Design of experiments and energy dissipation analysis for a contact mechanics 3D model of frictional bolted lap joints
Design-by-analogy: experimental evaluation of a functional analogy search methodology for concept generation improvement
Design of lange coupler for MIC and MMIC technology using complementary deformed omega structure
Design and Performance of Dual-Hop MIMO UWB Transmissions
Design and manufacturing of end plates of a 5 kW PEM fuel cell
Design, analysis, and testing of a microdot apodizer for the Apodized Pupil Lyot Coronagraph
Design and fabrication of two-axis micromachined steel scanners
Design and development of masked therapeutic antibodies to limit off-target effects Application to anti-EGFR antibodies
Design of novel PVA-based hybrid composites for drug delivery
Design and Experimental Results of Three-Phase Superconducting Fault Current Limiter Using Highly-Resistive YBCO Tapes
Design of semi-degradable hydrogels based on poly(vinyl alcohol) and poly(lactic-co-glycolic acid) for cartilage tissue engineering
Design, implementation and evaluation of a national campaign to distribute nine million free LLINs to children under five years of age in Tanzania
Design, synthesis and biological evaluation of 3,5-diaryl-isoxazoline/isoxazole-pyrrolobenzodiazepine conjugates as potential anticancer agents
Designing All-Pole Filters for High-Frequency Phase-Locked Loops
Design and Evaluation of NEUROBike: A Neurorehabilitative Platform for Bedridden Post-Stroke Patients
Design and rationale of a retrospective clinical effectiveness study of aldosterone antagonist therapy in patients with heart failure
Design of a decagonal photonic crystal fiber for ultra-flattened chromatic dispersion
Design and structure-activity relationships of potent and selective inhibitors of undecaprenyl pyrophosphate synthase (UPPS): Tetramic, tetronic acids and dihydropyridin-2-ones
Designing biomimetic scaffolds for bone regeneration: why aim for a copy of mature tissue properties if nature uses a different approach?
Designing pi-stacked molecular structures to control heat transport through molecular junctions
Design of a bioreductively-activated fluorescent pH probe for tumor hypoxia imaging
Design and implementation of flexible and stretchable systems
Design Considerations for a Micromachined Proportional Control Valve
Design and optimization of a stomach-specific drug delivery system of repaglinide: Application of simplex lattice design
Design, Synthesis, and Hybridisation of Water-Soluble, Peptoid Nucleic Acid Oligomers Tagged with Thymine
Design of artificial extracellular matrices for tissue engineering
Design and analysis issues in genome-wide somatic mutation studies of cancer
Design, syntheses, and SAR of 2,8-diazaspiro[4.5]decanones as T-type calcium channel antagonists
Design of a Multifunctional Anthropomorphic Prosthetic Hand With Extrinsic Actuation
Design of a Lightweight TCP/IP Protocol Stack with an Event-Driven Scheduler
Design considerations, architecture, and use of the Mini-Sentinel distributed data system
Design charts for yield acceleration and seismic displacement of retaining walls with surcharge through limit analysis
Design and efficiency measurement of cooperative driver assistance system based on wireless communication devices
Design of a New Carbon Paste Electrode Modified with TiO2 Nanoparticles to Use in an Electrochemical Study of Codeine and Simultaneous Determination of Codeine and Acetaminophen in Human Plasma Serum Samples
Design of an Energy Recovery System for a Gyrotron Backward-Wave Oscillator
Design and use of tailored hard-pulse trains for uniformed saturation of myocardium at 3 Tesla
Designing highly toughened hybrid composites through nature-inspired hierarchical complexity
Desiccation Induced Structural Alterations in a 66-Amino Acid Fragment of an Anhydrobiotic Nematode Late Embryogenesis Abundant (LEA) Protein
Design and validation of a light-weight reasoning system to support remote health monitoring applications
Design of postmetallocene catalytic systems of aryliminetype for olefins polymerization: XIII. Synthesis of tetradentate bis(2-hydroxy-1-naphthaldimine) ligands and their complexes with titanium(IV) dichloride
Design and implementation of UWB CMOS LC filters LNA for carrier less impulse radio receivers
Design and synthesis of immobilized Tamiflu analog on resin for affinity chromatography
Design of Effective Parameters on the Wick-Debinding Process for Powder Injection Molded Green Compact
Design of a superluminal ring laser gyroscope using multilayer optical coatings with huge group delay
Design of Robust Fault Detection Observer for Takagi-Sugeno Models Using the Descriptor Approach
Design of the Multi-Sensor Monitoring in Congestive Heart Failure (MUSIC) Study: Prospective Trial to Assess the Utility of Continuous Wireless Physiologic Monitoring in Heart Failure
Design and Performance of a Multisensor Heart Failure Monitoring Algorithm: Results From the Multisensor Monitoring in Congestive Heart Failure (MUSIC) Study
Design of Dry Nanosuspension with Highly Spontaneous Dispersible Characteristics to Develop Solubilized Formulation for Poorly Water-Soluble Drugs
Design of a tunable multi-band differential LC VCO using 0.35 mu m SiGe BiCMOS technology for multi-standard wireless communication systems
Design guidelines for software processes knowledge repository development
Designing Personalized Treatment Engagement Interventions for Depressed Older Adults
Designing the deconstruction of plant cell walls
Design of digital filters for frequency weightings required for risk assessments of workers exposed to vibration
Design, Developement and Scaling Analysis of a Variable Stiffness Magnetic Torsion Spring
Design and methods for evaluating an early childhood obesity prevention program in the childcare center setting
Designing carbon nanotube membranes for efficient water desalination
Design of synthetic microbial communities for biotechnological production processes
Design and Verification of a Pangenome Microarray Oligonucleotide Probe Set for Dehalococcoides spp.
Design of energy-saving adaptive fast-charging control strategy for Li-FePO4 battery module
Design of a Novel Gadolinium Optical Sensor Based on Immobilization of (Z)-N '-((Pyridine-2-yl) Methylene) Thiophene-2-carbohydrazide on a Triacetylcellulose Membrane and Its Application to the Urine Samples
Design and Construction of High-Sensitive and Selective Dysprosium(III) Electrochemical Membrane Sensor Based on a Thiourea Derivative
Design and Analysis for a 850 nm Si Photodiode Using the Body Bias Technique for Low-voltage Operation
Design and test beam studies for the CASTOR calorimeter of the CMS experiment
Designing and managing a flexible and dynamic biorepository system: a 15-year perspective from the CPCRA, ESPRIT, and INSIGHT clinical trial networks
Design optimization for bioMEMS studies of enzyme-controlled metabolic pathways
Design of frequency response masking FIR filter in the Canonic Signed Digit space using modified Artificial Bee Colony algorithm
Design concepts of optimized MRI magnet
Design of Anticancer Prodrugs for Reductive Activation
Design and analysis of a gallium lanthanum sulfide based nanoplasmonic coupler yielding 67% efficiency
Design and implementation of a novel superfusion system for ex vivo characterization of neural tissue by dielectric spectroscopy (DS)
Design of a block time bounded TDMA (BTB-TDMA) MAC protocol for UANets
Designing environmentally sustainable electronic cooling systems using exergo-thermo-volumes
Design of hybrid photonic crystal fiber: Polarization and dispersion properties
Design of a genetic-algorithm-based self-tuning sliding fuzzy controller for an active suspension system
Design and simulation of a steering gearbox with variable transmission ratio
Design of a model for BSA to meet free beam parameters for BNCT based on multiplier system for D-T neutron source
Design of a pipeline sensor-based platform for soil water content monitoring
Design of Nanostructured Tamarind Seed Kernel Polysaccharide-Silica Hybrids for Mercury (II) Removal
Design of an ion trap for trapping single Yb-171(+)
Design and characterization of an integrated microwave generator for BIST applications
Design of an orally efficacious hydroxyethylamine (HEA) BACE-1 inhibitor in a preclinical animal model
Design and Synthesis of Skeletal Analogues of Gambierol: Attenuation of Amyloid-beta and Tau Pathology with Voltage-Gated Potassium Channel and N-Methyl-D-aspartate Receptor Implications
Design of beta-Amyloid Aggregation Inhibitors from a Predicted Structural Motif
Design Constraints on a Synthetic Metabolism
Design of a CMOS T/R Switch With High Power Capability: Using Asymmetric Transistors
Designing Fixed Bed Column and Batch Studies of Chitosan Nanoparticles for Defluoridation of Drinking Water
Design, Synthesis and Characterization of a New Anionic Cell-Penetrating Peptide: SAP(E)
Design of the novel DVB-H antenna for mobile handheld terminal
Design and evaluation of the MAMMI dedicated breast PET
Design, Synthesis and Pharmacological Evaluation of a Series of 5-Carbethoxy-4-chloro-6-(substituted amino)pyrimidines as Potential Analgesic and Anti-flammatory Agents with Very Low Ulcerogenic Potential
Design, synthesis, spectral analysis and in vitro microbiological evaluation of 2-phenyl-3-(4,6-diarylpyrimidin-2-yl)thiazolidin-4-ones
Designed polymer structures with antifouling-antimicrobial properties
Design and Implementation of a 3D Multi-User Virtual World for Language Learning
Designing Mechanisms for the Management of Carrier Alliances
Design of an active-passive device for human ankle movement during functional magnetic resonance imaging analysis
Designing low carbon, low temperature bainite
Design and Use of Nanostructured Single-Site Heterogeneous Catalysts for the Selective Transformation of Fine Chemicals
Design Consideration for Surface-Enhanced (Resonance) Raman Scattering Nanotag Cores
Design of SRAM Cell Based Memory Array in Nano-Scaled Technology
Design of green concrete made of plant-derived aggregates and a pumice-lime binder
Design Guidelines for Interleaved Single-Phase Boost PFC Circuits
Design of solution heat treatments for aerospace alloys
Design of silica supported task-specific ionic liquid catalyst system for oxidation of cyclohexene to adipic acid with 30% H2O2
Design of ultrawideband coplanar waveguide-fed LI-shape planar monopole antennas
Design and performance of a high rate, high angular resolution beam telescope used for crystal channeling studies
Design of Highly Efficient Three-Stage Inverted Doherty Power Amplifier
Design, development and testing of hand-operated decorticator for Jatropha fruit
Design, Synthesis, and DNA-Binding of N-Alkyl(anilino)quinazoline Derivatives
Design and Synthesis of Potent Quillaja Saponin Vaccine Adjuvants
Design of composite patch reinforcement applied to mixed-mode cracked panel using finite element analysis
Design, synthesis, and in vitro antitumor activity of new 1,4-diarylimidazole-2-ones and their 2-thione analogues
Design and validation of siRNAs and shRNAs
Design of Cell-Surface-Retained Polymers for Artificial Ligand Display
Design of a Novel Efficient Human-Computer Interface: An Electrooculagram Based Virtual Keyboard
Design and Parametrical Analysis of Metamaterial Stacks in the Visible Spectral Range
Design, synthesis, and biological evaluation of bifunctional thyrointegrin inhibitors: new anti-angiogenesis analogs
Design and Analysis of an Adaptive Duty-Cycling Scheme for Load Balance in Wireless Sensor Networks
Design and Optimization of Dual Band Microstrip Antenna Using Particle Swarm Optimization Technique
Design, synthesis of some 2,6,9-trisubstituted purinyl thioureido derivatives and evaluation of antimicrobial activity
Design of the compact UWB antenna with PI-shaped matching stub
Design of customisable greening material using swarm modelling
Design of an "allsolid-state'' supercapacitor based on phosphoric acid doped polybenzimidazole (PBI) electrolyte
Design and optimization of an OR gate all optical circuit based on silicon photonic crystals
Design of silicon-based two-dimensional photonic integrated circuits: XOR gate
Design of a two-level controller for an active suspension system
Designing plasmonic systems using optical coupling between nanoparticles
Design of mM-W Fully Integrated CMOS Standing-Wave VCOs Using Low-Loss CPW Resonators
Design, implementation and first measurements with the Medipix2-MXR detector at the Compact Muon Solenoid experiment
Design and implementation of adaptive power-aware virtual machine provisioner (APA-VMP) using swarm intelligence
Design and development of precision force transducers
Design and real-time implementation of a new auto-tuned adaptive MPPT control for a photovoltaic system
Design and Synthesis of Benzosultine-sulfone as a o-Xylylene Precursor via Cross-enyne Metathesis and Rongalite: Further Expansion to Polycyclics via Regioselective Diels-Alder Reaction
Designed Reduction of Streptococcus pneumoniae Pathogenicity via Synthetic Changes in Virulence Factor Codon-pair Bias
Design of additive quantum codes via the code-word-stabilized framework
Design of molecularly ordered framework of mesoporous silica with squared one-dimensional channels
Design of clay/cement mixtures for extruded building products
Design principles for polymers as substratum for adherent cells
Design of a low-cost, precision belt-drive machine for high-throughput nanomanufacturing
Design of Intercell Transformers for High-Power Multicell Interleaved Flyback Converter
Design and Implementation of a Widened ZVS Range Active Clamping Two-Transformer Flyback Converter
Design of Multi-Frequency Compact Antennas for Automotive Communications
Designing new isomorphic fluorescent nucleobase analogues: the thieno[3,2-d]pyrimidine core
Design of Concentric Circular Antenna Array with Central Element Feeding Using Particle Swarm Optimization with Constriction Factor and Inertia Weight Approach and Evolutionary Programing Technique
Design of non-uniform circular antenna arrays using biogeography-based optimisation
Design considerations of electromagnetic force in a direct drive permanent magnet brushless motor
Design of Integrated Nanostructured Wicks for High-Performance Vapor Chambers
Design principles and specificity in biological networks with cross activation
Design of a modified three-rail shear test for shear fatigue of composites
Design of Benzene-1,2-diamines as selective inducible nitric oxide synthase inhibitors: a combined de novo design and docking analysis
Design Optimization of Hybrid-Integrated 20-Gb/s Optical Receivers
Desire, disease, and the origins of the dopaminergic system
Design of 40-108-GHz Low-Power and High-Speed CMOS Up-/Down-Conversion Ring Mixers for Multistandard MMW Radio Applications
Design of 1.2-V Broadband High Data-Rate MMW CMOS I/Q Modulator and Demodulator Using Modified Gilbert-Cell Mixer
Design of ultra-low voltage 0.5 V CMOS current bleeding mixer
Design of low voltage, low power CMOS low noise amplifier for 2.4 GHz wireless communications
Design of wideband acoustic detectors of gravitational waves equipped with displacement concentrators
Design, polymerization, and properties of high performance thermoplastic polyurethane elastomers from seed-oil derived soft segments
Design, Polymerization, and Properties of Polyurethane Elastomers from Miscible, Immiscible, and Hybridized Seed-Oil Derived Soft Segment Blends
Design criteria for a printed tissue engineering construct: A mathematical homogenization approach
Design, scale-out, and operation of a preferential CO methanation reactor with a nickel-ceria catalyst
Design considerations for a ground-based transit search for habitable planets orbiting M dwarfs
Design of Coil Length of On-Chip Transformer With High Turn Ratio and High Coupling Performance
Design and Fabrication of Zwitter-Wettable Nanostructured Films
Design of a novel chimeric tissue plasminogen activator with favorable Vampire bat plasminogen activator properties
Design of Novel Testable and Diagnosable Phase-Frequency Detector
Designing of dynamic labor inspection system for construction industry
Designing PEGylated therapeutic molecules: advantages in ADMET properties
Design of information granule-oriented RBF neural networks and its application to power supply for high-field magnet
Design and Analysis of a New Carbone Nanotube Full Adder Cell
Design of high-density antibody microarrays for disease proteomics: Key technological issues
Design of Active Transport Must Be Highly Intricate: A Possible Role of Myosin and Ena/VASP for G-Actin Transport in Filopodia
Design and fabrication of optical system for time-multiplex autostereoscopic display
Design of Experiments (DOE) for the Optimization of Titania-hydroxyapatite Functionally Graded Coatings
Design, fabrication and evaluation of nanoscale surface topography as a tool in directing differentiation and organisation of embryonic stem-cell-derived neural precursors
Design, fabrication, performance and reliability of Pt- and RuO2-coated microrelays tested in ultra-high purity gas environments
Design, implementation and scaling up of the balanced scorecard for hospitals in Lebanon: Policy coherence and application lessons for low and middle income countries
Design of integrated III-nitride/non-III-nitride tandem photovoltaic devices
Design of potent GlyT1 inhibitors: In vitro and in vivo profiles
Design Considerations for Characterizing Psychiatric Trajectories Across the Lifespan: Application to Effects of APOE-epsilon 4 on Cerebral Cortical Thickness in Alzheimer's Disease
Designing an integrated environmental monitoring plan for land-based marine fish farms located at exposed and hard bottom coastal areas
Design of a modular and low-latency virtual-environment platform for applications in motor adaptation research, neurological disorders, and neurorehabilitation
Design of novel histone-derived antimicrobial peptides
Design of a turbulent wing for small aircraft using multidisciplinary optimisation
Design-based stereology to quantify structural properties of artificial and natural snow using thin sections
Design, synthesis and ex-vivo release studies of colon-specific polyphosphazene-anticancer drug conjugates
Design of a sliding mode controller for decentralised multi-input systems
Design and Performance Results of First Polish SMES
Design and comparison of state-feedback and predictive-integral current controllers for active- and reactive-power control in renewable energy systems
Design of a high sensitivity emitter-detector avalanche photodiode imager using very high transmittance, back-illuminated, silicon-on-sapphire
Design and simulation of High Q MEMS LC-tank for oscillators
Designing a post-genomics knowledge ecosystem to translate pharmacogenomics into public health action
Design and methods of the Pro-B Type Natriuretic Peptide Outpatient Tailored Chronic Heart Failure Therapy (PROTECT) Study
Design and properties of a rate-dependent 'dynamic ligament' containing shear thickening fluid
Design and fabrication of antireflective nanoparticulate thin films with superhydrophilic self-cleaning properties on glass substrate
Design, synthesis and pharmacological screening of beta-amino-, thiadiazole/thiadiazine-phosphonate based triazole motifs as antimicrobial/cytotoxic agents
Design of the nutritional therapy for overweight and obese Spanish adolescents conducted by registered dieticians; the EVASYON study
Design and Synthesis of Potential Mechanism-Based Inhibitors of the Aminotransferase BioA Involved in Biotin Biosynthesis
Design of a Mass Transport Surface Utilizing Peristaltic Motion of a Self-Oscillating Gel
Designing Imidazole-Based Ionic Liquids and Ionic Liquid Monomers for Emerging Technologies
Design and Synthesis of New Benzimidazole-Carbazole Conjugates for the Stabilization of Human Telomeric DNA, Telomerase Inhibition, and Their Selective Action on Cancer Cells
Design and Control of a Real-Time Variable Modulus Vibration Isolator
Design of a Pep-1 peptide-modified liposomal nanocarrier system for intracellular drug delivery: Conformational characterization and cellular uptake evaluation
Design and Discovery of a Selective Small Molecule kappa Opioid Antagonist (2-Methyl-N-((2 '-(pyrrolidin-1-ylsulfonyl)biphenyl-4-yl)methyl)propan-1-amine, PF-4455242)
Design of optimal earth pole-sitter transfers using low-thrust propulsion
Design of broadband metal nanosphere antenna arrays with a hybrid evolutionary algorithm
Design of a microscopic electrical impedance tomography system using two current injections
Design and application of a pre-composting test step to determine the effect of high fat food wastes on an industrial scale in-vessel composting system
Design of one-piece flow production system with mixed flows: a timed process flow diagram-based approach
Design and characterization of an electrochemical peptide-based sensor fabricated via "click" chemistry
Design and control of energy integrated SOFC systems for in situ hydrogen production and power generation
Design of a Multiband Antenna for Mobile Handset Operations
Design and Analysis Considerations in Clinical Trials With a Sensitive Subpopulation
Design and validation of a questionnaire to measure continuity between care levels from the user's perspective
Design and Fabrication of Novel Ridge Guide Modulators in Lithium Niobate
Design of Primaries for a Wide-Gamut Television Colorimetry
Design of the cross-layer QoS framework for the IEEE 802.16 PMP networks
Design of full band UWB common-gate LNA
Design techniques of CMOS ultra-wide-band amplifiers for multistandard communications
Design of emission ratiometric metal-ion sensors with enhanced two-photon cross section and brightness
Design of the Park-in-Shape study: a phase II double blind randomized controlled trial evaluating the effects of exercise on motor and non-motor symptoms in Parkinson's disease
Design of spherical vessels under steady-state thermal loading using thermo-elasto-plastic concept
Design, Synthesis, and Validation of a beta-Turn Mimetic Library Targeting Protein-Protein and Peptide-Receptor Interactions
Designing of Highly Effective Complementary and Mismatch siRNAs for Silencing a Gene
Design and performance characterization of a new shear enhanced module with inbuilt cleaning arrangement
Designing ligand-enhanced optical absorption of thiolated gold nanoclusters
Design and rationale of a randomized controlled trial to reduce cardiovascular disease risk for patients with bipolar disorder
Design and Optimization of Superconducting Magnet System for 42.0-GHz Gyrotron
Design of UWB semi-circle-like slot antenna with controllable band-notch function
Design of cages in globe valve
Design of discontinuous water-using systems with a graphical method
Design and synthesis of coumarinyl 1,4-benzodioxanes as potential anti-oxidant
Desiccation and salinity effects on marine and brackish Fucus vesiculosus L. (Phaeophyceae)
Design Envelopes and Optical Feature Extraction Techniques for Survivability of SnAg Lead-free Packaging Architectures Under Shock and Vibration
Design of double toggle switching mechanisms
Design, synthesis, and testing of an 6-O-linked series of benzimidazole based inhibitors of CDK5/p25
Design and synthesis of piperazine derivatives as a novel class of gamma-secretase modulators that selectively lower A beta(42) production
Designing probiotics with respect to the native microbiome
Designing a physical activity parenting course: Parental views on recruitment, content and delivery
Design of a "Digital Atlas Vme Electronics" (DAVE) module
Design and characterization of a laterally mounted phased-array transducer breast-specific MRgHIFU device with integrated 11-channel receiver array
Design considerations for electrostatic microvalves with applications in poly(dimethylsiloxane)-based microfluidics
Design of Low Wear Polymer Composites
Design and installation of extra high voltage cryogenic dielectric test facilities for the superconducting electric equipment
Design of 154 kV Extra-High-Voltage Prototype SF6 Bushing for Superconducting Electric Power Applications
Design Techniques for a Low-Voltage VCO With Wide Tuning Range and Low Sensitivity to Environmental Variations
Design and Analysis of a 0.8-77.5-GHz Ultra-Broadband Distributed Drain Mixer Using 0.13-mu m CMOS Technology
Design improvement of circular molten carbonate fuel cell stack through CFD Analysis
Design of a Photoswitchable Cadherin
Designing a gold nanoparticle-based nanocarrier for microRNA transfection into the prostate and breast cancer cells
Design for All in action: An example of analysis and implementation
Designing water resistant lightweight geopolymers produced from waste materials
Design, synthesis, and biological evaluation of (hydroxyphenyl)naphthalene and -quinoline derivatives: Potent and selective nonsteroidal inhibitors of 17 beta-hydroxysteroid dehydrogenase type 1 (17 beta-HSD1) for the treatment of estrogen-dependent diseases
Design of the Revascularization With Open Bypass vs Angioplasty and Stenting of the Lower Extremity Trial (ROBUST) A Randomized Clinical Trial
Design and simulation of FIR band pass and band stop filters using gravitational search algorithm
Design, synthesis and biological evaluation of dihydronaphthalene and benzosuberene analogs of the combretastatins as inhibitors of tubulin polymerization in cancer chemotherapy
Design, fabrication and thrust measurement of a micro liquid monopropellant thruster
Design compensation for fabrication imperfections of tuning-fork gyroscopes
Design of phononic materials/structures for surface wave devices using topology optimization
Designing Pd-on-Au bimetallic nanoparticle catalysts for trichloroethene hydrodechlorination
Design and Application of a Decision Support Tool for the Selection of Logistics and Supply Chain Management Games
Design of Phosphorodiamidate Morpholino Oligomers ( PMOs) for the Induction of Exon Skipping of the Human DMD Gene
Design and FEM analysis of a new micromachined electro-thermally actuated micromanipulator
Design, Synthesis, and Biological Studies of Efficient Multivalent Melanotropin Ligands: Tools toward Melanoma Diagnosis and Treatment
Design and Analysis of Enhanced Catalysis in Scaffolded Multienzyme Cascade Reactions
Design of a handheld optical coherence microscopy endoscope
Design and characterisation of the staggered herringbone mixer
Design and Performance of a Microstructured PEEK Reactor for Continuous Poly-L-Ieucine-Catalysed Chalcone Epoxidation
Designing in the absence of sight: Design cognition re-articulated
Design of a Novel Flexible Capacitive Sensing Mattress for Monitoring Sleeping Respiratory
Design methodology for the optimization of transformer-loaded RF circuits
Design and Analysis of Non-Contact Gripper Using Swirl Force
Design and optimization of CMOS RF power amplifiers
Design, Fabrication, and Testing of a SOI-MEMS-Based Active Microprobe for Potential Cellular Force Sensing Applications
Design of QoS-Aware Energy-Efficient Fiber-Wireless Access Networks
Design and performance of an eight-pole resistive magnet for soft x-ray magnetic dichroism measurements
Design and optimization of catalysts and membrane reactors for the non-oxidative conversion of methane
Designing a simple organic salt-based supramolecular topical gel capable of displaying in vivo self-delivery application
Design and Optimization of a 3-Coil Inductive Link for Efficient Wireless Power Transmission
Design and development of a MEMS capacitive bending strain sensor
Design of ESD Protection Diodes With Embedded SCR for Differential LNA in a 65-nm CMOS Process
Design of satellite control system using optimal nonlinear theory
Design and simulation of a novel metallic microgripper using vibration to release nano objects actively
Design and Characterization of High-Voltage NMOS Structures in a 0.5 mu m Standard CMOS Process
Design, simulation and characterization of a MEMS optical scanner
Design, synthesis and biological evaluation of optically pure functionalized spiro[5,5]undecane-1,5,9-triones as HIV-1 inhibitors
Design of a 2DOF Vibrational Energy Harvesting Device
Design of equalized holographic ROADMs for application in CWDM METRO networks
Design of long-period fiber grating refractometric sensors with linear response by a genetic algorithm
Designing ribozymes for the inhibition of gene expression
Design and dynamics of flying height control slider with piezoelectric nanoactuator in hard disk drives
Design and elaboration of new solid acids for the synthesis of butylacetate
Design and synthesis of novel 3-(benzo[d]oxazol-2-yl)-5-(1-(piperidin-4-yl)-1H-pyrazol-4-yl)pyridin-2- amine derivatives as selective G-protein-coupled receptor kinase-2 and -5 inhibitors
Design and implementation of fiber-based multiphoton endoscopy with microelectromechanical systems scanning
Design of ecoregional monitoring in conservation areas of high-latitude ecosystems under contemporary climate change
Design Steps Toward a 40-kVA SiC JFET Inverter With Natural-Convection Cooling and an Efficiency Exceeding 99.5%
Design, fabrication and vacuum operation characteristics of two-dimensional comb-drive micro-scanner
Design of antireflective nanostructures and optical coatings for next-generation multijunction photovoltaic devices
Design of beta-sheet systems for understanding the thermodynamics and kinetics of protein folding
Design, synthesis, and evaluation of novel organophosphorus inhibitors of bacterial ureases
Design of double-walled carbon nanotubes for biomedical applications
Designability of lattice small-size protein models: is it sufficient to use the compact ground states?
Design of a highly magnified directional acoustic source based on the resonant cavity of two-dimensional phononic crystals
Design of millimeter-wave MEMS-based reconfigurable front-end circuits using the standard CMOS technology
Design, modelling, synthesis and biological evaluation of peptidomimetic phosphinates as inhibitors of matrix metalloproteinases MMP-2 and MMP-8
Design for intensified use in product-service systems using life-cycle analysis
Design considerations for primary control in multi-terminal VSC-HVDC grids
Design and characterization of microfabricated piezoresistive floating element-based shear stress sensors
Design of novel soft magnetic composites based on Fe/resin modified with silica
Designing different nanomagnets via delocalization of cobalt magnetic moment inside narrow single walled carbon nanotubes
Design of Nanosprings Using Si/SiGe Bilayer Thin Film
Design of Ag-Si3N4 Nanocermet Coatings for Photothermal Conversion Applications
Designing Active and Stable Silicon Photocathodes for Solar Hydrogen Production Using Molybdenum Sulfide Nanomaterials
Design, System Integration and Testing of Radar Systems
Design, synthesis and evaluation of small molecule reactive oxygen species generators as selective Mycobacterium tuberculosis inhibitors
Design of Chemical Shift-Switching F-19 Magnetic Resonance Imaging Probe for Specific Detection of Human Monoamine Oxidase A
Design and synthesis of compounds that extend yeast replicative lifespan
Design and calibration of a MEMS sensor for measuring the force and torque acting on a magnetic microrobot
Designing Fluorinated Cinchona Alkaloids for Enantioselective Catalysis: Controlling Internal Rotation by a Fluorine-Ammonium Ion gauche Effect (fNCCF)
Designing Fast Architecture-Sensitive Tree Search on Modern Multicore/Many-Core Processors
Designing tailored biomaterial surfaces to direct keratinocyte morphology, attachment, and differentiation
Design and analysis of coupled inductor bidirectional DC-DC convertor for high-voltage diversity applications
Design by Units Abstractions for Human and Compute Resources for Elastic Systems
Design of Metal-Binding Sites Onto Self-Assembled Peptide Fibrils
Designed aromatic homo-dipeptides: formation of ordered nanostructures and potential nanotechnological applications
Designing a nanotube using naturally occurring protein building blocks
Design of mixing systems for plant cell suspensions in stirred reactors
Design criteria for engineering inorganic material-specific peptides
Design and analysis of a polymeric photo-thermal microactuator
Design and Synthesis of Potent Bivalent Peptide Agonists Targeting the EphA2 Receptor
Design optimization of single and double layer Graphene phase modulators in SOI
Design and synthesis of regioisomerically pure unsymmetrical xanthene derivatives for staining live cells and their photochemical properties
Design and characterization of a novel hybrid actuator using shape memory alloy and DC micromotor for minimally invasive surgery applications
Design, synthesis, and in vitro activity of peptidomimetic inhibitors of myeloid differentiation factor 88
Design and characterization of a handheld multimodal imaging device for the assessment of oral epithelial lesions
Design and synthesis of dendritic molecular transporter that achieves efficient in vivo delivery of morpholino antisense oligo
Design and Synthesis of Model Transparent Aqueous Colloids with Optimal Scattering Properties
Design of a highly efficient catalyst for the oxaziridinium-mediated epoxidation of olefins by Oxone (R)
Design, preparation, in vitro and in vivo evaluation of Tc-99m-N2S2-Tat(49-57)-bombesin: A target-specific hybrid radiopharmaceutical
Design and properties of efficient tRNA:EF-Tu FRET system for studies of ribosomal translation
Design of acoustic beam aperture modifier using gradient-index phononic crystals
Design and analysis of a novel fine pitch and highly stretchable interconnect
Design, Fabrication and Testing of a Novel Micro-Bubble Oxygenator for Blood Oxygenation
Design and characterization of a single channel two-liquid capacitor and its application to hyperelastic strain sensing
Design, synthesis and selection of DNA-encoded small-molecule libraries
Design and synthesis of a novel DNA-encoded chemical library using Diels-Alder cycloadditions
Design of zero dispersive double clad fiber for high efficiency operation of two color light
Designing laminated metal composites for tensile ductility
Design of a robust model predictive controller with reduced computational complexity
Design and implementation of a voice-controlled prosthetic hand
Design of chiral auxiliaries for the allene ether Nazarov cyclization
Design, fabrication and testing of a silicon-on-insulator (SOI) MEMS parallel kinematics XY stage
Design and modeling of a MEMS pico-Newton loading/sensing device
Design of CeyCoxTi(1-x)O3+delta Perovskite for Photocatalysis: A Statistical Study
Design, Execution, and Analysis of Time-Varying Experiments for Model Discrimination and Parameter Estimation in Microreactors
Design and fabrication of a SU-8 based electrostatic microactuator
Design and characterization of a dual-stage, thermally actuated nanopositioner
Design methodology for smart actuator services for machine tool and machining control and monitoring
Design and fabrication of an integrated cell processor for single embryo cell manipulation
Designing two-dimensional materials that spring rapidly into three-dimensional shapes
Design and analysis of a twisting-type thermal actuator for micromirrors
Design, synthesis, and activity of analogues of phosphinothricin as inhibitors of glutamine synthetase
Design and potential application of PEGylated gold nanoparticles with size-dependent permeation through brain microvasculature
Design, modeling, and analysis of a feedstock logistics system
Design of a Contoured-Beam Reflectarray for a EuTELSAT European Coverage Using a Stacked-Patch Element Characterized by an Artificial Neural Network
Design of a Zinc-Finger Hydrolase with a Synthetic alpha beta beta Protein
Design and characterization of slit variable microgratings
Design optimization of supports for overhanging structures in aluminum and titanium alloys by selective laser melting
Designed fabrication of ordered porous Au/Ag nanostructured films for surface-enhanced Raman scattering substrates
Design and analysis of heat exchanger networks for integrated Ca-looping systems
Design and Synthesis of Diphosphine Ligands Bearing an Osmium(II) Bis(terpyridyl) Moiety as a Light-Harvesting Unit: Application to Photocatalytic Production of Dihydrogen
Design, synthesis and fluorescence of two-dimensional pillared layers by connecting infinite one-dimensional chains via 4,4 '-bipyridine
Design of stable and uniform single nanoparticle photonics for in vivo dynamics Imaging of nanoenvironments of zebrafish embryonic fluids
Design and Virtual Screening Towards Synthesis of Novel Substituted Thiosemicarbozones as Ribonuleotide Reductase (RNR) Inhibitors with Improved Cellular Trafficking and Anticancer Activity
Desiccation of nucleated mammalian cells in nanoliter droplets
Design and characterization of three-dimensional carbon nanotube foams
Design and Synthesis of Lipids for the Fabrication of Functional Lipidic Cubic-Phase Biomaterials
Design and characterization of novel supramolecular liquid crystals involving multiple hydrogen bonds
Design principles of adaptive immune systems
Design, synthesis and evaluation of 3,4-dihydroxybenzoic acid derivatives as antioxidants, bio-metal chelating agents and acetylcholinesterase inhibitors
Design, synthesis, and evaluation of 2-aryl-7-(3 ',4 '-dialkoxyphenyl)-pyrazolo [1,5-a]pyrimidines as novel PDE-4 inhibitors
Design and Evaluation of Fast Dissolving Films Containing Nizatidine
Design of neutral hydrocarbons having a planar tetracoordinate carbon
Design of quantum dot lattices in amorphous matrices by ion beam irradiation
Design of a two-cell rf-deflector cavity for ultra-short electron bunch measurement
Design and validation of an end-to-end simulator for imaging spectrometers
Design and Implementation of Integrated Common Mode Capacitors for SiC-JFET Inverters
Design of half-metallic ferrimagnets: Doped MnX (X=Te, Se, S)
Design and implementation of the START (STem cells for ARDS Treatment) trial, a phase 1/2 trial of human mesenchymal stem/stromal cells for the treatment of moderate-severe acute respiratory distress syndrome
Design considerations for watershed management decision support systems
Design of copper DNA intercalators with leishmanicidal activity
Design considerations of miniaturized least dispersive periodic slow-wave structures
Designing siRNA that distinguish between genes that differ by a single nucleotide
Design, synthesis and inclusion properties of butterfly-shaped hosts
Design and implementation of reconfigurable FIFOs for Voltage/Frequency Island-based Networks-on-Chip
Design of all-normal dispersion based on multimaterial photonic crystal fiber in IR region for broadband supercontinuum generation
Design and control of patterns in reaction-diffusion systems
Design and simulation of a solar supplied multifunctional active power filter and a comparative study on the current-detection algorithms
Designer self-assembling hydrogel scaffolds can impact skin cell proliferation and migration
Design and fabrication of an ac-electro-osmosis micropump with 3D high-aspect-ratio electrodes using only SU-8
Design of a Mixed Ionic/Electronic Conducting Oxygen Transport Membrane Pilot Module
Design and characterization of a lumped element single-ended superconducting microwave parametric amplifier with on-chip flux bias line
Design and performance of the ADMX SQUID-based microwave receiver
Designing a global multi-disciplinary classroom: A learning experience in supply chain logistics management
Design of a Mobile Microrobot Based on Standing and Travelling Waves
Design of new reaction conditions for characterization of a mutant thermophilic alpha-L-fucosidase
Design, construction, and operation of a transported fluid bed process development unit for biomass fast pyrolysis: Effect of pyrolysis temperature
Design of mutant beta(2) subunits as decoy molecules to reduce the expression of functional Ca2+ channels in cardiac cells
Design and Dynamic Culture of 3D-Scaffolds for Cartilage Tissue Engineering
Designing interfaces for explicit preference elicitation: a user-centered investigation of preference representation and elicitation process
Design of a simple current-mode multiplier topology using a single CCCII
Design of culture substrates for large-scale expansion of neural stem cells
Design and performance of an instrument for soft landing of Biomolecular ions on surfaces
Design and FPGA-realization of a self-synchronizing chaotic decoder in the presence of noise
Designed surface construction by photo-induced vapor-phase assisted surface polymerization of vinyl monomers using immobilized free radical initiators
Design of Nanocomposites by Vapor-Phase Assisted Surface Polymerization
Designed surface modification by photo-induced vapor phase assisted surface polymerization of vinyl monomers
Design, synthesis and cytotoxic evaluation of 4-methylidenepyrazolidin-3-ones
Design Principles of a Genetic Alarm Clock
Design, analysis and simulation of magnetostrictive actuator and its application to high dynamic servo valve
Design and implementation of a multi-octave-band audio camera for realtime diagnosis
Design and synthesis of a Pt(II) nanoscopic trigonal bipyramidal cage using a new tripodal ester-containing ligand
Design, Synthesis and Evaluation of Fe-S Targeted Adenosine 5 '-Phosphosulfate Reductase Inhibitors
Design and characterization of sulfobetaine-containing terpolymer biomaterials
Designing production systems for quality: research opportunities from an automotive industry perspective
Design and implementation of a micro-power CMOS voltage reference circuit based on thermal compensation of V-gs
Design and Characterization of 4,5-Bis(diarylamino)phthalic Acid Diesters as a New Class of Fluorophores Exhibiting Efficient Blue Emission in the Solid State
Designing nonviral vectors for efficient gene transfer and long-term gene expression
Design of a tunable L-band multi-wavelength laser system for application to gas spectroscopy
Design and synthesis of novel chiral spiro ionic liquids
Design and synthesis of hydrophobic and chiral anions from amino acids as precursor for functional ionic liquids
Design science in Information Systems research
Design and optimization of a light-emitting diode projection micro-stereolithography three-dimensional manufacturing system
Design of microstereolithography system based on dynamic image projection for fabrication of three-dimensional microstructures
Design of deep-red persistent phosphors of Gd3Al5-xGaxO12:Cr3+ transparent ceramics sensitized by Eu3+ as an electron trap using conduction band engineering
Design and Characterization of a Three-terminal Transcriptional Device Through Polymerase Per Second
Design of novel magnetic materials based on ZrCuSiAs-like semiconducting pnictide-oxides from first-principles calculations
Design of Retaining Walls Using Big Bang-Big Crunch Optimization
Design of Yagi-Uda Antenna Using Biogeography Based Optimization
Design of very thin wide band absorbers using modified local best particle swarm optimization
Designed IgM from glycoengineering
Design of robust model predictive control with input constraints
Design of EBG power distribution networks with VHF-Band cutoff frequency and small unit cell size for mixed-signal systems
Designing robust structures - A nonlinear simulation based approach
Design optimization with an uncertain vibroacoustic model
Design of synthetic oligoribonucleotide-based agonists of Toll-like receptor 3 and their immune response profiles in vitro and in vivo
Design rules for creating sensing and self-actuating microcapsules
Designing self-propelled microcapsules for pick-up and delivery of microscopic cargo
Design and Development of Very High Frequency Resonant DC-DC Boost Converters
Design of highly stable, ordered cage mesostructured monoliths with controllable pore geometries and sizes
Designing Oligomeric Ethylene Terephtalate Building Blocks by Chemical Recycling of Polyethylene Terephtalate
Design of Join Glass Composition for Layered All-Ceramic Restorations
Design of heterogeneous multicore fibers as sampled true-time delay lines
Design of low crosstalk and bend insensitive optical interconnect using rectangular array multicore fiber
Design of accelerating structure on a novel compact electron linac
Design and optimization of a lactate amperometric biosensor based on lactate oxidase cross-linked with polymeric matrixes
Design and development of pyrolyser to extract medicinal oil from the stem of Ziziphus jujuba
Design scaling rules for 2R-optical self-phase modulation-based regenerators
Design of a motorcycle frame using neuroacceleration strategies in MOEAs
Design and implementation of an instantaneous turning-on mechanism for PCs
Design and performance evaluation of a medium flow sampler for airborne brominated flame retardants (BFRs)
Design of nanocarriers for efficient cellular uptake and endosomal release of small molecule and nucleic acid drugs: learning from virus
Design and application of a Health Insurance Portability and Accountability Act-compliant privacy framework for pervasive healthcare
Design of graphene sheets-supported Pt catalyst layer in PEM fuel cells
Design of ZnO nanostructured films: Characterization and ecotoxicological studies
Design Considerations for a System for Photocatalytic Hydrogen Production from Water Employing Mixed-Metal Photochemical Molecular Devices for Photoinitiated Electron Collection
Designing biological systems
Design and fabrication of light weight current collectors for direct methanol fuel cells using the micro-electro mechanical system technique
Design principle and prototyping of a direct photosynthetic/metabolic biofuel cell (DPMFC)
Design and fabrication of pumpless small direct methanol fuel cells for portable applications
Design and fabrication of highly thermally stable HfMoN/HfON/Al2O3 tandem absorber for solar thermal power generation applications
Design and synthesis of arylaminoethyl amides as noncovalent inhibitors of cathepsin S. Part I
Design of cathepsin K inhibitors for osteoporosis
Design of two-dimensional zero reference codes with a genetic algorithm
Design of two-dimensional optical alignment signals robust to diffractive effects
Design of two-dimensional zero reference codes by means of a global optimization method
Design of molecule-based magnetic conductors
Designed boronate ligands for glucose-selective holographic sensors
Design of an Adaptable Optofluidic Aspherical Lens by Using the Elastocapillary Effect
Desipramine prevents cardiac gap junction uncoupling
Design and validation of a low density array (Nosochip) for the detection and identification of the main pathogenic bacteria and fungi responsible for nosocomial pneumonia
Design and finite element analysis of a new stack ultrasonic motor based on in-plane mode
Design and control of a nanoprecision XY Theta scanner
Design, fabrication, and performance analysis of GaN vertical electron transistors with a buried p/n junction
Design and Control of a Three-Axis Serial-Kinematic High-Bandwidth Nanopositioner
Design of Aromatic-Containing Cell-Penetrating Peptide Mimics with Structurally Modified pi Electronics
Design, Analysis, and Control of a Spring-Assisted Modular and Reconfigurable Robot
Design and performance analysis of quasi-orthogonal space-time block codes for four antennae
Design of compliant robotic joint with embedded-sensing elements of conductive silicone rubber
Design and characterization of polypropylene matrix/glass fibers composite materials
Design and Optimization of Resonance-Based Efficient Wireless Power Delivery Systems for Biomedical Implants
Design and synthesis of cutoff filter using photonic bandgap materials
Design and operating characteristics of a bandpass optical filter with oblique bandgap structures of Fibonacci lattices
Design of integrated polarization beam splitter with liquid crystal
Design and implementation of a shape memory alloy actuated reconfigurable airfoil
Design and experimental demonstration of a variable-length optical packet routing system with unified contention resolution
Design of Spiro[2.3]hex-1-ene, a Genetically Encodable Double-Strained Alkene for Superfast Photoclick Chemistry
Design novel polyhydroxyl fatty amide based on Balanites roxburgii oil and its application for coating
Design, Synthesis, and Evaluation of a Lanthanide Chelating Protein Probe: CLaNP-5 Yields Predictable Paramagnetic Effects Independent of Environment
Designing Supermacroporous Cryogels Based on Polyacrylonitrile and a Polyacrylamide-Chitosan Semi-interpenetrating Network
Design of homooxacalix[3]arene-porphyrin heterocapsules which provide novel cavities for molecular recognition
Design of photonic crystal nanocavity with Q-factor of similar to 10(9)
Design of high-Q photonic crystal microcavities with a graded square lattice for application to quantum cascade lasers
Design and fabrication of photonic crystal quantum cascade lasers for optofluidics
Design of high-Q microcavities for proposed two-dimensional electrically pumped photonic crystal lasers
Design of postmetallocene Schiff base-like catalytic systems for polymerization of olefins: XI. Synthesis of Schiff bases containing cycloalkyl substituents from 2-acetyl-6-bromopyridine
Design and fabrication of piezoelectric nanocomposite structures for microdevice applications
Design of a highly efficient and water-tolerant sulfonic acid nanoreactor based on tunable ordered porous silica for the von Pechmann reaction
Design of three-dimensional missile guidance law via tunable nonlinear H-infinity control with saturation constraint
Design of missile guidance law via variable structure control
Design and analysis of photonic crystal coupled cavity arrays for quantum simulation
Designing and simulating a nitinol-based micro ejector
Designing hybrid flexure systems and elements using Freedom and Constraint Topologies
Design of Halbach-Array-Based Permanent-Magnet Motors With High Acceleration
Design and fabrication of bismith-silicate photonic crystal fiber
Design, fabrication, and testing of a near constant pressure fuel delivery system for miniature fuel cells
Design of dispersants for the dispersion of carbon nanotubes in an organic solvent
Design of efficient surface plasmon polariton modulators using graphene
Design and implementation of an efficient acoustically levitated drop reactor for in stillo measurements
Design and Implementation Biometric Access Control System Using Fingerprint for Restricted Area Based on Gabor Filter
Design support systems: A case study of modular design of the set-top box from design knowledge externalization perspective
Design of supramolecular beta-sheet forming beta-turns containing aromatic rings and non-coded alpha-aminoisobutyric acid and the formation of flat fibrillar structures through self-assembly
Design and development of liposomes incorporating a bioactive labdane-type diterpene. In vitro growth inhibiting and cytotoxic activity against human cancer cell lines
Design of Metallo-Supramolecular Polymers with Electronic and Optical Properties
Design of a large-scale cable-driven robot with translational motion
Design, synthesis and biological evaluation of thiourea and nicotinamide-containing sorafenib analogs as antitumor agents
Design and evaluation of imidazolium cation-based ionic liquids having double-armed anions for selective cation conduction
Design and characterization of short antimicrobial peptides using leucine zipper templates with selectivity towards microorganisms
Design and Evaluation of Nonfluorous CO2-Soluble Oligomers and Polymers
Design of a Biomimetic Skin for an Octopus-Inspired Robot - Part I: Characterising Octopus Skin
Design and Comparison of Inductors and Intercell Transformers for Filtering of PWM Inverter Output
Design of a Novel 4-DOF Wrist-Type Surgical Instrument With Enhanced Rigidity and Dexterity
Design of periodic bandpass filters based on a multi-reflector Gires-Tournois resonator for DWDM systems
Design of an acoustic metamaterial lens using genetic algorithms
Design, synthesis and preliminary biological evaluation of new hydroxamate histone deacetylase inhibitors as potential antileukemic agents
Designing novel donor-acceptor copolymers using genetic algorithm
Design criteria for star polymer formation processes via living free radical polymerization
Design of clinical Studies - New Approaches on the other side of randomized Investigations
Design of more efficient olefin and alkane metathesis heterogeneous catalysts via surface organometallic chemistry
Design and engineering human forms of monoclonal antibodies
Designed Catalysts from Pt Nanoparticles Supported on Macroporous Oxides for Selective Isomerization of n-Hexane
Design of a fractional order PID controller for an AVR using particle swarm optimization
Design of an H-infinity PID Controller Using Particle Swarm Optimization
Design and Optimization of a Broadband Waveguide Magic-T Using a Stepped Conducting Cone
Design and Synthesis of Amphiphilic and Luminescent Tris-Cyclometalated Iridium(III) Complexes Containing Cationic Peptides as Inducers and Detectors of Cell Death via a Calcium-Dependent Pathway
Designing Stable Radicals with Highly Electrophilic or Nucleophilic Character: Thiadiazinyl as a Case Study
Design for a room-temperature superconductor
Design, synthesis and anticancer activity of nitric oxide donating/chalcone hybrids
Design of long-period gratings: Necessity of a three-layer fiber geometry for cladding mode characteristics
Designing fluorescent sensors of heparin
Design and self-assembly of wide and robust coordination cages
Design of an efficient measurement cell for characterizing sensing properties of nanostructured sensitive layers coated on chips
Design and Synthesis of Chiral Imidazolidine-Pyridine Ligands
Designing Fuzzy-Rule-Based Systems Using Continuous Ant-Colony Optimization
Design, synthesis, and conformational dynamics of a gated molecular basket
Design and analysis of a three party password-based authenticated key exchange protocol using extended chaotic maps
Design and preparation of novel antibody system and application for the determination of heroin metabolites in urine by capillary electrophoresis
Design of a High Efficiency Fuel Cell dc/dc Converter Dedicated to Transportation Applications
Design and characterization of novel systems for molecular nanoscale self-assembly
Designed assembly of low-dimensional molecular units: Novel neutral coordination polymers based on (phosphonodithioato)Ni-II complexes
Design and Biophysical Characterization of Bioresponsive Degradable Poly(dimethylaminoethyl methacrylate) Based Polymers for In Vitro DNA Transfection
Design constraints on FSC LCD
Design and characterization of a robust photoelectrochemical device to generate hydrogen using solar water splitting
Design and control of a single-stage dual-actuator system for high-precision manufacturing
Design of a graphene oxide-SnO2 nanocomposite with superior catalytic efficiency for the synthesis of beta-enaminones and beta-enaminoesters
Design, synthesis and biological evaluation of novel desmuramyldipeptide analogs
Designing and synthesis of bis(2,4-dihydroxybenzylidene)-1,6-diaminohexane and its efficient application as neutral carrier for preparation of new copper selective electrode
Design and analysis of a dual-axis resonator fiber-optic gyroscope employing a single source
Design and implementation of a novel portable atomic layer deposition/chemical vapor deposition hybrid reactor
Design of X-Band RF CMOS Transceiver for FMCW Monopulse Radar
Design of isolated hybrid systems minimizing costs and pollutant emissions
Design of isolated renewable hybrid power systems
Designing crops for new challenges
Design and synthesis of 2(1H)-pyrazinones as inhibitors of protein kinases
Design and synthesis of novel 5,6-bisindolylpyrimidin-4-ones structurally related to ruboxistaurin (LY333531)
Design of a Papain Immobilized Antimicrobial Food Package with Curcumin as a Crosslinker
Designing Catalysts for Functionalization of Unactivated C-H Bonds Based on the CH Activation Reaction
Design of a Compact Robotic Manipulator for Single-Port Laparoscopy
Designer disordered materials with large, complete photonic band gaps
Design and implementation of wavelength-flexible network nodes
Design and Evaluation of Fragment-Like Estrogen Receptor Tetrahydroisoquinoline Ligands from a Scaffold-Detection Approach
Desiccation tolerance in bovine sperm: A study of the effect of intracellular sugars and the supplemental roles of an antioxidant and a chelator
Design of and Experiments on a Dragonfly-Inspired Robot
Design and Construction of a One- Dimensional DNA Track for an Artificial Molecular Motor
Design and implementation of a 1-5 GHz UWB low noise amplifier in 0.18 mu m CMOS
Design and electrical characterization of wafer-level micro-package for GaAs-based RFMEMS switches
Designing and using synthetic RNA thermometers for temperature-controlled gene expression in bacteria
Designed Folding of Pseudopeptides: The Transformation of a Configurationally Driven Preorganization into a Stereoselective Multicomponent Macrocyclization Reaction
Desipramine attenuates loss of cardiac sympathetic neurotransmitters produced by congestive heart failure and NE infusion
Design and optimization of Bi-metallic Ag-ZSM5 catalysts for catalytic oxidation of volatile organic compounds
Design of Drives for Inverter-Assisted Induction Generators
Design and synthesis of heteroleptic ruthenium (II) complexes and their applications in nanocrystalline TiO2 solar cells
Design of Oligo(ethylene glycol)-Based Thermoresponsive Polymers: an Optimization Study
Designing ligands to bind proteins
Designing nature-based mitigation to promote multiple benefits
Design and Performance Testing of an Ultrasonic Linear Motor with Dual Piezoelectric Actuators
Designs of Bioreactor Systems for Solvent-Free Lipase-Catalyzed Synthesis of Fructose-Oleic Acid Esters
Design preservation over subsequent releases of a software product: a case study of Baan ERP
Design and characterisation of an active mirror for EUV-lithography
Design, Synthesis, and Biological Evaluation of Potent and Selective Class IIa Histone Deacetylase (HDAC) Inhibitors as a Potential Therapy for Huntington's Disease
Design, synthesis and biological evaluation of 2 '-deoxy-2 ',2 '-difluoro-5-halouridine phosphoramidate ProTides
Design and synthesis of a nucleoside and a phosphonate analogue constructed on a branched-threo-tetrofuranose skeleton
Design of membrane modules used in hybrid distillation/pervaporation systems
Design and scale-up of pressurized fluid extractors for food and bioproducts
Designed molecular mechanics using self-associating polymers
Design and optimization of a multiplex anti-influenza peptide immunoassay
Designing directional cloaks from localized fields
Design and construction of a magnetic resonance compatible multi-injector gas jet delivery system
Design, Synthesis and Destructive Dynamic Effects of BODIPY-containing and Curcuminoid Boron Tracedrugs for Neutron Dynamic Therapy
Design of liquid-crystalline aqueous suspensions of rutile nanorods: Evidence of anisotropic photocatalytic properties
Design and Construction of a First-Generation High-Throughput Integrated Robotic Molecular Biology Platform for Bioenergy Applications
Design, syntheses and evaluation of hemocompatible pegylated-antimicrobial polymers with well-controlled molecular structures
Designing a binding interface for control of cancer cell adhesion via 3D topography and metabolic oligosaccharide engineering
Design and performance analysis of a dynamic-paging AAA mobility management scheme for PMIPv6-based wireless networks
Designing of omni-directional high reflectors by using one-dimensional modified hybrid Fibonacci/Cantor band-gap structures at optical telecommunication wavelength band
Design of Experiments in Optimization and Validation of a Hydrophilic Interaction Liquid Chromatography Method for Determination of Amlodipine Besylate and Bisoprolol Fumarate
Design and Simulation of 2-D 2-Dot Quantum-Dot Cellular Automata Logic
Design and development of green roof substrate to improve runoff water quality: Plant growth experiments and adsorption
Design of a new scheme to indicate the domain of applicability of near singular approach in 2D BEM
Design and Structure of Stapled Peptides Binding to Estrogen Receptors
Design optimization for passive adaptive structural networks
Design and evaluation of novel nonsteroidal dissociating glucocorticoid receptor ligands
Design and microfabrication of a constant-force microgripper
Design and scalability analysis of optical phased-array 1 x N switch on planar lightwave circuit
Design and Fabrication of Ultralight Weight, Adjustable Multi- electrode Probes for Electrophysiological Recordings in Mice
Design and performance of a wireless sensor network for catchment-scale snow and soil moisture measurements
Design, synthesis, and properties of new derivatives of pentacene
Design of a binaphthyl-based axially chiral amino acid as an organocatalyst for direct asymmetric aldol reactions
Design of new solid catalysts for the selective conversion of glycerol
Design of dental implants, influence on the osteogenesis and fixation
Design and performance prediction of a novel zeolite-water adsorption air conditioner
Design Considerations for a Prosthetic Anterior Cruciate Ligament
Design rules for semi-transparent organic tandem solar cells for window integration
Design, structure-based focusing and in silico screening of combinatorial library of peptidomimetic inhibitors of Dengue virus NS2B-NS3 protease
Design and analysis of orthogonally compliant features for local contact pressure relief in transtibial prostheses
Design and Production of a Multiepitope Construct Derived From Hepatitis E Virus Capsid Protein
Designable formation of metal nanoparticle array with the deposition of negatively charged nanoparticles
Designing Genome-Wide Association Studies: Sample Size, Power, Imputation, and the Choice of Genotyping Chip
Design of Highly Oleophobic Cellulose Surfaces from Structured Silicon Templates
Design, synthesis, biological evaluation and toxicity studies of N,N-disubstituted biguanides as quorum sensing inhibitors
Design and evaluation of a treatment programme for Spanish adolescents with overweight and obesity. The EVASYON Study
Designing e-Health Interventions for Low-Health-Literate Culturally Diverse Parents: Addressing the Obesity Epidemic
Design of Bio-Inspired Multi-Stage Regulations for Diagnostic Molecular Automata
Design of water-based ferrofluids as contrast agents for magnetic resonance imaging
Design and analysis of multiple diseases genome-wide association studies without controls
Design of genetically modified soybean proglycinin A1aB1b with multiple copies of bioactive peptide sequences
Design of a C/EBP-specific, dominant-negative bZIP protein with both inhibitory and gain-of-function properties
Design principles for oxygen-reduction activity on perovskite oxide catalysts for fuel cells and metal-air batteries
Design and rationale of the tobacco, exercise and diet messages (TEXT ME) trial of a text message-based intervention for ongoing prevention of cardiovascular disease in people with coronary disease: a randomised controlled trial protocol
Design of ligand binding to an engineered protein cavity using virtual screening and thermal up-shift evaluation
Design, Synthesis, and Evaluation of 5 '-Diphenyl Nucleoside Analogues as Inhibitors of the Plasmodium falciparum dUTPase
Design and analysis of shock-absorbing structure for flat panel display
Design of IIR digital filters with non-standard characteristics using differential evolution algorithm
Design and Implementation of a Real-Time Video-Based Rendering System Using a Network Camera Array
Design and implementation of an automated partial volume correction in PET: Application to dopamine receptor quantification in the normal human striatum
Designing novel Sn-Bi, Si-C and Ge-C nanostructures, using simple theoretical chemical similarities
Design and Fabrication of Coupled NanoSQUIDs and NEMS
Design, Synthesis and Evaluation of Light-Activatable Organic Molecules that Target-Selectively Degrade DNA, Proteins and Carbohydrates; an Interdisciplinary Challenge for a Synthetic Organic Chemist
Design and synthesis of cleavable biotinylated dideoxynucleotides for DNA sequencing by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry
Design of a Website on Nutrition and Physical Activity for Adolescents: Results From Formative Research
Design and fabrication of micro-textures for inducing a superhydrophobic behavior on hydrophilic materials
Design of continuous ion exchange process for the wastewater treatment
Design of Multi-Edge-Type Bilayer-Expurgated LDPC Codes for Decode-and-Forward in Relay Channels
Design and Synthesis for Multimedia Systems Using the Targeted Dataflow Interchange Format
Design and hydrothermal synthesis of an unprecedented luminescent (7,7)-connected binodal potassium-pyrazolate coordination framework
Design, synthesis, expression, and characterization of the genes for mouse Fc gamma RIIb1 and Fc gamma RIIb2 cytoplasmic regions
Designing metallic glass matrix composites with high toughness and tensile ductility
Design of a time-modulator to synthesize different patterns in time-modulated antenna arrays
Design Principles of FRET-Based Dye-Sensitized Solar Cells with Buried Quantum Dot Donors
Design, construction, and analysis of a novel class of self-folding RNA
Design and development of a catalytic ribonucleoprotein
Designed structural-rearrangement of an active group I ribozyme
Designed patterns: Flexible control of precipitation through electric currents
Designing and Developing S100P Inhibitor 5-Methyl Cromolyn for Pancreatic Cancer Therapy
Designer microbes for biosynthesis
Design, synthesis and biological evaluation of novel bergapten derivatives as potent lipid lowering agents
Design and Synthesis of Novel Polyglycerol Hybrid Nanomaterials for Potential Applications in Drug Delivery Systems
Design of phase II cancer trials using a continuous endpoint of change in tumor size: Application to a study of sorafenib and erlotinib in non-small-cell lung cancer
Design and endpoints of clinical trials in hepatocellular carcinoma
Design of multiplier-less sharp transition width non-uniform filter banks using gravitational search algorithm
Design and Synthesis of Active Site Inhibitors of the Human Farnesyl Pyrophosphate Synthase: Apoptosis and Inhibition of ERK Phosphorylation in Multiple Myeloma Cells
Design and synthesis of Raman reporter molecules for tissue imaging by immuno-SERS microscopy
Design and Synthesis of Novel DFG-Out RAF/Vascular Endothelial Growth Factor Receptor 2 (VEGFR2) Inhibitors. 1. Exploration of [5,6]-Fused Bicyclic Scaffolds
Design and Optimization of Potent and Orally Bioavailable Tetrahydronaphthalene Raf Inhibitors
Design of lead peptide drugs from mushroom targeting cysteine proteases
Design of hybrid differential evolution and group method of data handling networks for modeling and prediction
Design of easily synchronizable oscillator networks using the Monte Carlo optimization method
Design optimization of robot grippers using teaching-learning-based optimization algorithm
Design of Covalent Organic Frameworks for Methane Storage
Design and synthesis of a transition state analog of a metalloporphyrin-catalysed oxidation reaction
Design of cassette baculovirus vectors for the production of therapeutic antibodies in insect cells
Design and cohort description of the InterAct Project: an examination of the interaction of genetic and lifestyle factors on the incidence of type 2 diabetes in the EPIC Study
Designing, fabricating, and imaging Raman hot spots
Design of Fullerene Derivatives for Stabilizing LUMO Energy using Donor Groups Placed in Spatial Proximity to the C-60 Cage
Design of novel FN3 domains with high stability by a consensus sequence approach
Design and Fabrication of Artificial Skin: Chitosan and Gelatin Immobilization on Silicone by Poly Acrylic Acid Graft Using a Plasma Surface Modification Method
Design of Porphyrin Nanoclusters toward Discovery of Novel Properties and Functions
Design Optimization of Input and Output Coupled Power Split Infinitely Variable Transmissions
Design of PCR-amplified DNA fragments for in vivo gene delivery: Size-dependency on stability and transgene expression
Design and resonant frequency calculation of rectangular microstrip antennas
Design and characterisation of poly(lactide-co-glycolide) small particulate systems for the delivery of immunostimulant CpG oligonucleotide
Design of noninflammatory synthetic siRNA mediating potent gene silencing in vivo
Design, implementation and maintenance of a model organism database for Arabidopsis thaliana
Designs of two randomized, community-based trials to assess the impact of alternative cookstove installation on respiratory illness among young children and reproductive outcomes in rural Nepal
Design, Facile Synthesis, and Antibacterial Activity of Hybrid 1,3,4-thiadiazole-1,3,5-triazine Derivatives Tethered via -S- Bridge
Designing the hydrophobic core of Thermus flavus malate dehydrogenase based on side-chain packing
Design, synthesis and biological profile of new inhibitors of multidrug resistance associated proteins carrying a polycyclic scaffold
Design optimization of vibration energy harvesters fabricated by lamination of thinned bulk-PZT on polymeric substrates
Design and Validation of a Novel Method to Measure Cross-Sectional Area of Neck Muscles Included during Routine MR Brain Volume Imaging
Design of a Potent CB1 Receptor Antagonist Series: Potential Scaffold for Peripherally-Targeted Agents
Designed dendrimer syntheses by self-assembly of single-site, ssDNA functionalized dendrons
Design and baseline characteristics of the Short bouTs of Exercise for Preschoolers (STEP) study
Design and performance of the silicon strip tracker of the Fermi Large Area Telescope
Designing synthetic vaccines for HIV
Design optimization of superconducting magnetic energy storage coil
Design Rules for Organic Donor-Acceptor Heterojunctions: Pathway for Charge Splitting and Detrapping
Design and expression of organophosphorus acid anhydride hydrolase activity in human butyrylcholinesterase
Design of non-nucleoside inhibitors of HIV-1 reverse transcriptase with improved drug resistance properties. 2.
Designing biomaterials for tissue engineering based on the deconstruction of the native cellular environment
Design, synthesis and evaluation of monovalent Smac mimetics that bind to the BIR2 domain of the anti-apoptotic protein XIAP
Design of hydroxyapatite-bound transition metal catalysts for environmentally-benign organic syntheses
Design and development of a controlled pressure/temperature set-up for in situ studies of solid-gas processes and reactions in a synchrotron X-ray \powder diffraction station
Designing and Implementing Insulin Infusion Protocols and Order Sets
Design, Synthesis, and Evaluation of pH-Dependent Hydrolyzable Emetine Analogues as Treatment for Prostate Cancer
Designing Biomaterials To Direct Stem Cell Fate
Design of new promoters and of a dual-bioreporter based on cross-activation by the two regulatory proteins XylR and HbpR
Design, recruitment and start up of a primary care weight loss trial targeting African American and Hispanic adults
Design of hammerhead ribozymes to distinguish single base changes in substrate RNA
Design of leader sequences that improve the efficiency of the enzymatic synthesis of 2 '-amino-pyrimidine RNA for in vitro selection
Design, modeling, and implementation of a re-programmable neural switch (RNS)
Design, construction, and evaluation of a specific chimeric antigen to diagnose chagasic infection
Design and In Vivo Evaluation of a Robotized Needle Insertion System for Small Animals
Design of an Adaptive MIMO System using Linear Dispersion Code
Design and implementation of high-throughput RNAi screens in cultured Drosophila cells
Design and characteristics of holographic neural photo-stimulation systems
Design and Implementation of Multisteerable Matched Filters
Design, synthesis, and immunostimulatory properties of CpG DNAs containing alkyl-linker substitutions: Role of nucleosides in the flanking sequences
Desiccation, Moisture Content and Germination of Zostera marina L. Seed
Design and Validation of an Augmented Reality System for Laparoscopic Surgery in a Real Environment
Designing and recasting LHC analyses with MADANALYSIS 5
Design of Stable Nanocrystalline Alloys
Design and Development of a Heart Rate Variability Analyzer
Design of Realistic Hybrid Marine Resource Management Programs in Oceania
Design principles of pluripotency
Design of biofunctional assemblies on solids through recombinant spherical bacterial protein lumazine synthase
Design of recursive convolutional space-time codes with an arbitrary number of transmit antennas
Design of linear dispersion codes: Asymptotic guidelines and their implementation
Design of a Phase III Clinical Trial with Prospective Biomarker Validation: SWOG S0819
Design of capacity-approaching irregular low-density parity-check codes
Design and synthesis of a Mn(III)-porphyrin steroid conjugate used as a new cleavable affinity label: on the road to semi-synthetic catalytic antibodies
Designing molecules for PDT: red light-induced DNA cleavage on disulfide bond activation in a dicopper(II) complex
Designing ordered DNA-linked nanoparticle assemblies
Design and validation of a motion-tracking system for ROM measurements in home rehabilitation
Design and Recruitment for the GAP Trial, Investigating the Preventive Effect on Asthma Development of an SQ-Standardized Grass Allergy Immunotherapy Tablet in Children with Grass Pollen-Induced Allergic Rhinoconjunctivitis
Design evaluation of graphene nanoribbon nanoelectromechanical devices
Design of NIR-Absorbing Simple Asymmetric Squaraine Dyes Carrying Indoline Moieties for Use in Dye-Sensitized Solar Cells with Pt-Free Electrodes
Design of oscillator networks with enhanced synchronization tolerance against noise
Design of an artificial hemoprotein based on human serum albumin
Design of catabolic cassettes for styrene biodegradation
Design challenges facing clinical trials of the effectiveness of new HIV-prevention technologies
Design and Validation of a Colorimetric Test for the Genetic Diagnosis of Hemochromatosis Using alpha-Phosphorothioate Nucleotides
Design and development of polymer conjugates as anti-angiogenic agents
Design of Compact 4 x 4 UWB-MIMO Antenna with WLAN Band Rejection
Design Considerations for Massively Parallel Sequencing Studies of Complex Human Disease
Design flexibility in cis-regulatory control of gene expression: Synthetic and comparative evidence
Design of nanostructured biological materials through self-assembly of peptides and proteins
Designing optimal stimuli to control neuronal spike timing
Design of electrically driven hybrid vanadium dioxide (VO2) plasmonic switches
Design of a leucine zipper coiled coil stabilized 1.4 kcal mol(-1) by phosphorylation of a serine in the e position
Design of block transceivers with decision feedback detection
Design of a fluorescent electrophoretic mobility shift assay improved for the quantitative and multiple analysis of protein-DNA complexes
Design of Thermoelectric Modules for High Heat Flux Cooling
Design and execution of clinical trials in orthopaedic surgery
Design in science: extending the landscape ecology paradigm
Design of vascular endothelium-specific drug-targeting strategies for the treatment of cancer
Design and validation of a bifunctional ligand display system for receptor targeting
Design of high-performance heterogeneous metal catalysts for green and sustainable chemistry
Design of ruthenium catalysts bound to inorganic crystalline materials for environmentally-benign organic synthesis
Design and testing of a plant-specific PCR primer for ecological and evolutionary studies
Design of chiral macrocyclic complexes based on trans-chelation of n : n metal-bidentate P,N- or N,N-ligands
Design and validation of ureC-based primers for groundwater detection of urea-hydrolyzing bacteria
Design and rationale of a genetic cohort study on congenital cardiac disease: experiences from a multi-institutional platform in Quebec
Design of a combinatorial oligonucleotide library containing all possible hexamer palindromes: PCR synthesis and application for identifying restriction cleavage sites
Design and Structural Requirements of the Potent and Safe TLR-9 Agonistic Immunomodulator MGN1703
Design of a Novel Cyclotide-Based CXCR4 Antagonist with Anti-Human Immunodeficiency Virus (HIV)-1 Activity
Design and synthesis of new biomimetic materials by sol-gel: A Cu-II(histidine)(2) complex covalently bonded on a silica matrix
Designing management options to reduce surface runoff and sediment yield with farmers: An experiment in south-western France
Design Study of a Beam line for the PIXE-PIGE Experiment
Design and analysis of fuel ethanol production from raw glycerol
Design Optimization of a Double-Sided Hybrid Excited Linear Flux Switching PM Motor With Low Force Ripple
Design Considerations of Magnetic Devices for Bright Laser-plasma Undulator Radiation in the Water Window Spectral Range
Design and development of five-channel interference filter polychromator for SST-1 Thomson scattering system
Design, realization and uncertainty analysis of a laser-based primary calibration facility for solar cells at PTB
Design and pharmacological activity of glycinamide and N-methoxy amide derivatives of analogs and constitutional isomers of valproic acid
Design and chemical evaluation of reduced machine-yield cigarettes
Design and Synthesis of Some Novel Oxiconazole-Like Carboacyclic Nucleoside Analogues, as Potential Chemotherapeutic Agents
Design and operation of a conical spouted bed reactor pilot plant (25 kg/h) for biomass fast pyrolysis
Design of a Tactile Instrument to Measure Human Roughness Perception in a Virtual Environment
Design of multi materials combining crystalline and amorphous metallic alloys
Design and optimization of hydrogen storage units using advanced solid materials: General mathematical framework and recent developments
Designing Rehabilitation Programs for Neglect: Could 2 Be More Than 1+1?
Design of High-Performance Asynchronous Pipeline Using Synchronizing Logic Gates
Design, conduct, and analysis of a multicenter, pharmacogenomic, biomarker study in matched patients with severe sepsis treated with or without drotrecogin Alfa (activated)
Design and use of Candida scores at the intensive care unit
Design Challenges in Silicon Photonics
Design for a Lithographically Patterned Bioartificial Endocrine Pancreas
Design of a fuzzy controller using variable structure approach for application to DC-DC converters
Design and formulation of nano-sized spray dried efavirenz-part I: influence of formulation parameters
Design of multiplex calibrant plasmids, their use in GMO detection and the limit of their applicability for quantitative purposes owing to competition effects
Design, synthesis and antileishmanial in vitro activity of new series of chalcones-like compounds: A molecular hybridization approach
Design, Fabrication, and Characterization of a 3-D CMOS Fluxgate Magnetometer
Design of a cryogenic CO2 capture system based on Stirling coolers
Design and technological solutions for the plasma facing components of WENDELSTEIN 7-X
Design improvement of the target elements of Wendelstein 7-X divertor
Design and fabrication of a thermoelectric nanowire characterization platform and nanowire assembly by utilizing dielectrophoresis
Design and analysis of plasmonic filters based on stubs
Design and instrumentation of a mid-size test station for measuring static and dynamic pressures in silos under different conditions - Part I: Description
Design and instrumentation of a mid-size test station for measuring static and dynamic pressures in silos under different conditions - Part II: Construction and validation
Designing hypothesis of substituted benzoxazinones as HIV-1 reverse transcriptase inhibitors: QSAR approach
Design, Synthesis, and Biological Evaluation of Novel 2H-Pyran-2-one Derivatives as Potential HIV-1 Reverse Transcriptase Inhibitors
Design of a Lossless Image Compression System for Video Capsule Endoscopy and Its Performance in In-Vivo Trials
Design and develop a nondestructive infrared spectroscopy instrument for assessment of mango (Mangifera indica) quality
Design-based computational procedure for performance prediction and analysis of single-phase self-excited induction generator
Designation of enzyme activity of glycine-N-acyltransferase family genes and depression of glycine-N-acyltransferase in human hepatocellular carcinoma
Design and synthesis of pyrazole-oxindole conjugates targeting tubulin polymerization as new anticancer agents
Design and analysis of a smart graded fiber-reinforced composite laminated plate
Designing the selenium and bladder cancer trial (SELEBLAT), a phase III randomized chemoprevention study with selenium on recurrence of bladder cancer in Belgium
Design, synthesis, and in vitro antimicrobial activities of novel azetidinyl-3-quinazolin-4-one hybrids
Design and fabrication of piezoresistive strain gauges based on nanocrystalline diamond layers
Design of microalgal biomass production in a continuous photobioreactor: An integrated experimental and modeling approach
Designing simulation experiments with controllable and uncontrollable factors for applications in healthcare
Design and test of a 434 MHz multi-channel amplifier system for targeted hyperthermia applicators
Design, synthesis and biological evaluation of some novel thienopyrimidines and fused thienopyrimidines as anti-inflammatory agents
Design and synthesis of some pyrazole derivatives of expected anti-inflammatory and analgesic activities
Design of Generalized Terminal Sliding Mode Control for Second-Order Systems
Designing a Randomized Clinical Trial to Evaluate Personalized Medicine: A New Approach Based on Risk Prediction
Design of the Photovoltaic Solar Electro-Oxidation (PSEO) process for wastewater treatment
Design curves of prefabricated vertical drains including smear and transition zones effects
Design of Antibody-Maytansinoid Conjugates Allows for Efficient Detoxification via Liver Metabolism
Design and Analysis of Temperature Preference Behavior and its Circadian Rhythm in Drosophila
Design and synthesis of new anionic "polymeric ionic liquids" with high charge delocalization
Design and Synthesis of Polymer-Bound Penta-aza Ligand for Selective Adsorptive Separation of Cobalt(II) from Zirconium(IV)
Design of the miniaturized free electron laser module as an efficient source of the THz waves
Design of Circularly Polarized Low-Profile and Slender Antenna With a Helical Element
Design and Efficient Synthesis of Some Azole and Thiazole Systems Based 3-(1,3-Dioxoisoindolin-2-yl)-3-oxopropanenitrile
Design and Development of a Field Applicable Gold Nanosensor for the Detection of Luteinizing Hormone
Designing and implementing multicenter clinical randomized controlled trials on moxibustion with large samples
Design, fabrication and testing of a high performance silicon piezoresistive Z-axis accelerometer with proof mass-edge-aligned-flexures
Design assessment of ITER port plug plasma facing material options
Design assessment of tungsten as an upper panel plasma facing material in ITER
Design of Barrages with Genetic Algorithm Based Embedded Simulation Optimization Approach
Design of polarization-selective light emitters using one-dimensional metal grating mirror
Designing CD8+T cell vaccines: it's not rocket science (yet)
Design and optimization of topical methotrexate loaded niosomes for enhanced management of psoriasis: Application of Box-Behnken design, in-vitro evaluation and in-vivo skin deposition study
Design of human granzyme B variants resistant to serpin B9
Design of new secreted phospholipase A(2) inhibitors based on docking calculations by modifying the pharmacophore segments of the FPL67047XX inhibitor
Design, Synthesis, and Pharmacological Characterization of Fluorescent Peptides for Imaging Human V1b Vasopressin or Oxytocin Receptors
Design of a Microstrip Monopole Slot Antenna With Unidirectional Radiation Characteristics
Design of a simple setpoint filter for minimizing overshoot for low order processes
Design of Proportional Integral Controllers with Decouplers for Unstable Two Input Two Output Systems
Design strategies to simplify and miniaturize imaging systems
Design, Synthesis, and Pharmacological Evaluation of Novel Hybrid Compounds to Treat Sickle Cell Disease Symptoms. Part II: Furoxan Derivatives
Designing a multimodal feeder network by covering stops with different modes
Design of laser-aided diagnostics for the negative hydrogen ion source SPIDER
Design of a beam emission spectroscopy diagnostic for negative ions radio frequency source SPIDER
Design of a cavity ring-down spectroscopy diagnostic for negative ion rf source SPIDER
Design, interface development and structural analyses of SPIDER vacuum vessel
Design and analyses of a one-dimensional CFC calorimeter for SPIDER beam characterisation
Design and characterization of fully integrated PhotoFETS for ionizing particle sensors using a CMOS submicron technology
Design and Optimization of Polyphosphazene Functionalized Fiber Matrices for Soft Tissue Regeneration
Design optimization and background modeling of the HEX experiment on Chandrayaan-I
Designed Iron Carbonyls as Carbon Monoxide (CO) Releasing Molecules: Rapid CO Release and Delivery to Myoglobin in Aqueous Buffer, and Vasorelaxation of Mouse Aorta
Design and simulation of anodic aluminum oxide nanograting double light trapping structure for thin film silicon solar cells
Design and therapeutic applications of cyclotides
Designing choice experiments by optimizing the complexity level to individual abilities
Design and analysis of a vertical directional coupler between a three-dimensional plasmonic slot waveguide and a silicon waveguide
Design of curved photonic crystal using swelling induced instabilities
Design and measurements of a broadband two-dimensional acoustic lens
Design, Fabrication, and Characterization of a Resonant Magnetic Field Sensor Based on MEMS Technology
Design and numerical simulation of an optofluidic pressure sensor
Designer natriuretic peptides: a vision for the future of heart failure therapeutics
Design of in-building wireless networks deployments using evolutionary algorithms
Design of an extremely high birefringence nematic liquid crystal based on a dinaphthyl-diacetylene mesogen
Design and Development of a Multiplex Real-Time PCR Assay for Detection of HIV-1 and HCV Using Molecular Beacons
Design of Experiments for the Modeling of the Phenol Adsorption Process
Design and optimization of buck and double buck converters by means of geometric programming
Design and synthesis of novel 2-(3-substituted propyl)-3-(2-methyl phenyl) quinazolin-4-(3H)-ones as a new class of H-1-antihistaminic agents
Design and Synthesis of Novel 3-(Phenyl)-2-(3-substituted propylthio) Quinazolin-4-(3H)-ones as a New Class of H-1-Antihistaminic Agents
Design and synthesis of 3-(4-chlorophenyl)-2-(2-(4-substituted)-2-oxoethylthio)quinazolin-4(3H)- one as antihistamine agents
Design and Synthesis of Novel 3-(4-Chlorophenyl)-2-(3-Substituted Propyl Thio) Quinazolin-4-(3H)-ones as a New Class of H-1-Antihistaminic Agents
Design and fabrication of a quasi-ordered nanoporous silicon membrane suitable for thermally induced drug release
Design, Synthesis, Application and Recovery of Guar Gum 5-Amino Salicylic Acid Hydroximate [GASAH] Resin for Selective Separation and Determination of Trace and Heavy Metal Ions
Designing of hydroxyapatite-gelatin based porous matrix as bone substitute: Correlation with biocompatibility aspects
Design and characterization of high precision in-pixel discriminators for rolling shutter CMOS pixel sensors with full CMOS capability
Design of photovoltaic-based current sources for maximum power transfer by means of power gyrators
Design of task scheduling process for a multifunction radar
Designing a series of decision-theoretic phase II trials in a small population
Design of an Optimum Superdirective Beamformer Through Generalized Directivity Maximization
Design and monitoring of horizontal subsurface-flow constructed wetlands for treating nursery leachates
Designed hydrophilic and charge mutations of the fibronectin domain: towards tailored protein biodistribution
Designing the epitope flanking regions for optimal generation of CTL epitopes
Design of a GEM-based detector for the measurement of fast neutrons
Design study of a wide-angle infrared thermography and visible observation diagnostic on JT-60SA
Design methodology for barrier-based two phase flow distributor
Design and Synthesis of Antitumor Heck-Coupled Sclareol Analogues: Modulation of BH3 Family Members by SS-12 in Autophagy and Apoptotic Cell Death
Design and Economic Evaluation of a Coal-to-Synthetic Natural Gas Process
Design of proteins from smaller fragments - learning from evolution
Design and Performance Evaluation of Image Processing Algorithms on GPUs
Design, synthesis, and SAR studies of novel polycyclic acids as potent and selective inhibitors of human 11 beta-hydroxysteroid dehydrogenase type 1 (11 beta-HSD-1)
Design and Characterization of a Bicomponent Melt-Spun Fiber Optimized for Artificial Turf Applications
Design and fabrication of uniquely shaped thiol-ene microfibers using a two-stage hydrodynamic focusing design
Design and analysis of a desktop micro-machine for vibration-assisted micromachining
Design features of the Diabetes and Periodontal Therapy Trial (DPTT): A multicenter randomized single-masked clinical trial testing the effect of nonsurgical periodontal therapy on glycosylated hemoglobin (HbA1c) levels in subjects with type 2 diabetes and chronic periodontitis
Design of high-density electron spin-polarized test masses
Designing of endlessly single mode polarization maintaining highly birefringent nonlinear micro-structure fiber at telecommunication window by FV-FEM
Design and performance analysis of side by side, echelon and H-shaped multiple printed dipole antennas for wireless local area network application
Design and Development of a Dialysis Food Frequency Questionnaire
Design of contact-aided compliant cellular mechanisms with curved walls
Design and Demonstration of Apodized Comb Filters on SOI
Design Methodology for Appropriate Technology: Engineering as if People Mattered
Design-of-use and design-in-use by customers in differentiating value creation
Design optimization using Statistical Confidence Boundaries of response surfaces: Application to robust design of a biomedical implant
Design process excludes users: the co-creation activities between user and designer
Design of LED power supply with high power factor based on SEPIC converter
Design and Test of an HV-CMOS Intelligent Power Switch With Integrated Protections and Self-Diagnostic for Harsh Automotive Applications
Designing a low-cost drug resistance database for viral hepatitis
Design and synthesis of some novel hydrazide, 1,2-dihydropyridine, chromene derivatives carrying biologically active sulfone moieties with potential anticancer activity
Design and analysis of a continuous hybrid differentiator
Design and frequency analysis of continuous finite-time-convergent differentiator
Design, synthesis and docking studies on benzamide derivatives as histone deacetylase inhibitors
Designing symmetric polar direct drive implosions on the Omega laser facility
Design and Characterization of Microelectromechanical System Flow Sensors Using Silicon Nanowires
Design and development of a quantitative real time PCR assay for monitoring of HTLV-1 provirus in whole blood
Desiccation tolerance and cryopreservation of seeds of black poplar (Populus nigra L.), a disappearing tree species in Europe
Design of Electrodes Based on a Carbon Nanofiber Nonwoven Material for the Membrane Electrode Assembly of a Polybenzimidazole-Membrane Fuel Cell
Design, Synthesis and Biological Evaluation of Novel Fluorinated Heterocyclic Hybrid Molecules Based on Triazole & Quinoxaline Scaffolds Lead to Highly Potent Antimalarials and Antibacterials
Design of an LED-based headlamp low-beam system using combined prisms
Designing Fullerene Separation Materials: A Theoretical Study
Design sensitivity analysis of a system under intact conditions using measured response data
Design, optimization and realization of a ferroelectric liquid crystal based Mueller matrix ellipsometer using a genetic algorithm
Design, solid-phase synthesis, and biological evaluation of novel 1,5-diarylpyrrole-3-carboxamides as carbonic anhydrase IX inhibitors
Designed damping controller for SSSC to improve stability of a hybrid offshore wind farms considering time delay
Design and field procedures in the US National Comorbidity Survey Replication Adolescent Supplement (NCS-A)
Design and Construction of High-Sensitive and Selective Zinc(II) Electrochemical Membrane Sensor Based on N,N-bis (2hydroxy-4-metoxybenzaldehyde)-2,6-di amino pyridine
Design, Synthesis, and Mechanistic Investigations of Bile Acid-Tamoxifen Conjugates for Breast Cancer Therapy
Design of Bi-functional Bioconjugated Gold Nanoparticles by Pulsed Laser Ablation with Minimized Degradation
Design and synthesis of orally bioavailable serum and glucocorticoid-regulated kinase 1 (SGK1) inhibitors
Design and Implementation of a Polynomial Basis Multiplier Architecture Over GF(2(m))
Design Considerations for DOI-encoding PET Detectors Using Phosphor-Coated Crystals
Design, synthesis and antistaphylococcal activity of marine pyrrole alkaloid derivatives
Design of Binary LDPCA Codes with Source Revealing Rate-Adaptation
Design of novel additives and nonaqueous solvents for lithium-ion batteries through screening of cyclic organic molecules: an ab initio study of redox potentials
Design of an innovative enthalpy wheel based humidification system for polymer electrolyte fuel cell
Design and testing of biological scaffolds for delivering reparative cells to target sites in the lung
Design considerations for ultraviolet-nanoimprint lithography resists
Design of a Compton camera for 3D prompt-gamma imaging during ion beam therapy
Design of experiment methodology to improve the energy density of lithiated metal phosphates
Design and optimization of highly-selective fungal CYP51 inhibitors
Design studies of innovatively small fusion reactor based on biomass-fusion hybrid concept: GNOME
Design and characterization of a direct ELISA for the detection and quantification of leucomalachite green
Design and experimental evaluation of an interactive system for pre-movement time reduction in case of fire
Designing Calcium Release Channel Inhibitors with Enhanced Electron Donor Properties: Stabilizing the Closed State of Ryanodine Receptor Type 1
Design and synthesis of some thiazolyl and thiadiazolyl derivatives of antipyrine as potential non-acidic anti-inflammatory, analgesic and antimicrobial agents
Designing controllers for physics-based characters with motion networks
Designed Experiments in Nanotechnology: Reviewing the Statistical Analyses of Five Studies
Design of dynamic Hohlraum opacity samples to increase measured sample density on Z
Design Specification for BER Analysis Methods Using Built-In Jitter Measurements
Design and synthesis of some thiazolotriazolyl esters as anti-inflammatory and analgesic agents
Design and Implementation of an Instructional Innovation for At-Risk Learners: A Classroom Study
Design and use of instructional materials for student-centered learning: A case in learning ecological concepts
Design and Instrumentation of an Advanced Magnetocaloric Direct Temperature Measurement System
Design of Biomimetic Vascular Grafts With Magnetic Endothelial Patterning
Design of Peptide Inhibitors That Bind the bZIP Domain of Epstein-Barr Virus Protein BZLF1
Design of a single chambered microbial electrolytic cell reactor for production of biohydrogen from rice straw hydrolysate
Design of broadband nearly-zero flattened dispersion highly nonlinear photonic crystal fiber
Design, synthesis, pharmacological evaluation and computational studies of 1-(biphenyl-4-yl)-2-[4-(substituted phenyl)-piperazin-1-yl] ethanones as potential antipsychotics
Design and Subject Characteristics in the Federally-Funded Citalopram Trial in Children with Pervasive Developmental Disorders
Design charts for sizing CC/DV system aided with personalized evaporative cooler to the desired thermal comfort
Design and synthesis of pyrrolidine-containing sphingomimetics
Design and probing of efflux functions of EGFP fused ABC membrane transporters in live cells using fluorescence spectroscopy
Design Features behind Success of the Ecosystem Management Decision Support System and Future Development
Designing the synthesis of catalytically active Ti-beta by using various new templates in the presence of fluoride anion
Designed, synthetically accessible bryostatin analogues potently induce activation of latent HIV reservoirs in vitro
Design study of an HHG-seeded harmonic cascade free-electron laser
Design of large-bandwidth single-mode operation waveguides in silicon three-dimensional photonic crystals using two guided modes
Design and Implementation of a Low-Complexity Reed-Solomon Decoder for Optical Communication Systems
Design, development and characterization of a nanomagnetic system based on iron oxide nanoparticles encapsulated in PLLA-nanospheres
Designing highly tunable semiflexible filament networks
Design and Synthesis of 1-Aroyl-2-ylidene Hydrazines under Conventional and Microwave Irradiation Conditions and their Cytotoxic Activities
Designer Drug (DD) abuse in Poland; a review of the psychoactive and toxic properties of substances found from seizures of illegal drug products and the legal consequences thereof. Part 1 - Cannabinoids and Cathinones
Design rules for the self-assembly of a protein crystal
Design of a multichannel, multiresolution smart imaging system
Design and synthesis of new amino-modified iminocyclitols: selective inhibitors of alpha-galactosidase
Design of Multiband PIFA with Low SAR Value for All Commercial Mobile Communication Bands
Design and Testing of a Linear Generator for Wave-Energy Applications
Designing the C-GEN lightweight direct drive generator for wave and tidal energy
Design and Testing Strategies for Modular 3-D-Multiprocessor Systems Using Die-Level Through Silicon Via Technology
Design of Barbiturate-Nitrate Hybrids that Inhibit MMP-9 Activity and Secretion
Designing a New Diels-Alderase: A Combinatorial, Semirational Approach Including Dynamic Optimization
Design, synthesis and evaluation of redox, second order nonlinear optical properties and theoretical DFT studies of novel bithiophene azo dyes functionalized with thiadiazole acceptor groups
Design, Preparation, and Characterization of High-Activity Mutants of Human Butyrylcholinesterase Specific for Detoxification of Cocaine
Design of High-Activity Mutants of Human Butyrylcholinesterase against (-)-Cocaine: Structural and Energetic Factors Affecting the Catalytic Efficiency
Design, Synthesis and Structure of Novel Para-Quinones and their Antibacterial Activity
Design of gold nanoshells via a gelatin-mediated self-assembly of gold nanoparticles on silica cores
Design of safety-critical systems using the complementarities of success and failure domains with a case study
Designing Magnetic Organic Lattices from High-Spin Polycyclic Units
Design of Wideband Rectangular-Shaped Coupler with Virtual Short Stubs for Wireless Communication Applications
Design, Synthesis, Antinociceptive and Anti-inflammatory Activities of Novel Piroxicam Analogues
Design principles of photosynthetic light-harvesting
Design and validation of low-cost assistive glove for hand assessment and therapy during activity of daily living-focused robotic stroke therapy
Design, synthesis and evaluation of tetrahydropyran based COX-1/-2 inhibitors
Design, synthesis and biological evaluation of novel 2-[(2,4-diaryl-3-azabicyclo[3.3.1]nonan-9-ylidene)hydrazono]-1,3-thiazol idin-4-ones as a new class of antimicrobial agents
Desiccation mechanism for formation of giant polygons on Earth and intermediate-sized polygons on Mars: Results from a pre-fracture model
Design and implementation of application-specific instruction-set processor design for high-throughput multi-standard wireless orthogonal frequency division multiplexing baseband processor
Design and experimental study of a power supply for micro-wire EDM
Design of a high repetition rate S-band photocathode gun
Design and synthesis of HIV-1 protease inhibitors for a long-acting injectable drug application
Design and Assessment of Cavitational Device for Enhancement of Sewage Sludge Fermentation
Design and performance evaluation of SDD based X-ray spectrometer for future planetary exploration
Design of RNAi Hairpins for Mutation-Specific Silencing of Ataxin-7 and Correction of a SCA7 Phenotype
Designing a conservation area network that supports the representation and persistence of freshwater biodiversity
Designing and Reporting Case Series in Plastic Surgery
Designs of High Color Purity RGB Color Filter for Liquid Crystal Displays Applications Using Fabry-Perot Etalons
Design and Analysis of Double Excited 3-Degree-of-Freedom Motor for Robots
Design and Characterization of CMOS On-Chip Antennas for 60 GHz Communications
Design of a CMOS On-Chip Slot Antenna With Extremely Flat Cavity at 140 GHz
Design, Construction and Characterization of AC Atmospheric Pressure Air Non-thermal Plasma Jet
Design and Synthesis of an Fmoc-SPPS-Compatible Amino Acid Building Block Mimicking the Transition State of Phosphohistidine Phosphatase
Designing fault detection observers for linear systems with mismatched unknown inputs
Design and Modeling of a Capacitor Bank Power Supply for Fast Charging
Design and implementation of a relational database of macroscopic cross-sections for steady-state and transient analysis in a medium sized PWR
Design, synthesis and validation of integrin alpha(2)beta(1)-targeted probe for microPET imaging of prostate cancer
Design of ReBaCuO-coated conductors for FCL
Designing Thin Speaker Systems Using Single-walled Carbon Nanotubes
Design of an Underactuated Robot Hand Based on Displacement-Force Conversion Mechanism
Design of Reversible Synchronous Sequential Circuits Using Pseudo Reed-Muller Expressions
Design and evaluation of 66 kV-class HTS power cable using REBCO wires
Design Control for Clinical Translation of 3D Printed Modular Scaffolds
Design and synthesis of spiro[indole-thiazolidine]spiro[indole-pyrans] as antimicrobial agents
Design, Synthesis and Trypanocidal Evaluation of Novel 1,2,4-Triazoles-3-thiones Derived from Natural Piperine
Designer drugs in herbal aphrodisiacs
Design of a Compact Circularly Polarized Dual-Mode Monopulse Cavity-Backed Substrate Integrated Waveguide Antenna
Design of thermal self supported 700 W class, solid oxide fuel cell module using, LSGM thin film micro tubular cells
Designing current collector/composite electrode interfacial structure of organic radical battery
Design principles for chlorophyll-binding sites in helical proteins
Design Studies of Integrated Fabry-Perot Sensor Based on Bragg Grating Mirrors
Design of a robust and efficient power electronic interface for the grid integration of solar photovoltaic generation systems
Design of liposomal colloidal systems for ocular delivery of ciprofloxacin
Design of High Gain and Broadband Antennas at 60 GHz for Underground Communications Systems
Design and evaluation of a hybrid mock circulatory loop for total artificial heart testing
Design, synthesis, inhibitory activity, and binding mode study of novel DNA methyltransferase 1 inhibitors
Designer TGF beta Superfamily Ligands with Diversified Functionality
Design of a robust fault detection based observer for linear switched systems with external disturbances
Design of a reactor operating in supercritical water conditions using CFD simulations. Examples of synthesized nanomaterials
Design, Synthesis and Cytotoxicity of a New Series of Isoxazolidine Based Nucleoside Analogues
Desiccation affects bacterial community structure and function in temperate stream sediments
Design and Preparation of SOFC Unit Cells Using Scandia-Stabilized Zirconia Electrolyte for Intermediate Temperature Operation
Designing Photoswitchable Peptides Using the AsLOV2 Domain
Design of next-generation protein therapeutics
Design of a wavelength division demultiplexer using Si-based one-dimensional photonic crystal with a defect
Design of a true moving bed reactor for the direct synthesis of dimethyl carbonate
Design rules for p-i-n diode carriers sweeping in nano-rib waveguides on SOI
Design principles for utility-driven services and cloud-based computing modelling for the Internet of Things
Design, fabrication and characterization of In0.23Ga0.77As-channel planar Gunn diodes for millimeter wave applications
Design of a novel tryptophan-rich membrane-active antimicrobial peptide from the membrane-proximal region of the HIV glycoprotein, gp41
Designer promoter: an artwork of cis engineering
Design, development and implementation of a surgical simulation pathway curriculum for biliary disease
Designing a family of reconfigurable vehicles using multilevel multidisciplinary design optimization
Design of optical components for a light emitting diode zoom illumination system
Design and synthesis of Hsp90 inhibitors: Exploring the SAR of Sansalvamide A derivatives
Designing a Decision Support System for Distinguishing ADHD from Similar Children Behavioral Disorders
Design and Synthesis of Hydroxyapatite with Organic Modifiers for Application to Environmental Remediation
Designing Efficient Infrastructural Investment and Asset Transfer Mechanisms in Humanitarian Supply Chains
Design of optically path-length-matched, three-dimensional photonic circuits comprising uniquely routed waveguides
Design and economic optimization of shell and tube heat exchangers using Artificial Bee Colony (ABC) algorithm
Design, synthesis and biological evaluation of novel nitroaromatic compounds as potent glutathione reductase inhibitors
Design of co-planar waveguide-fed slot/patch antenna with wire bond for a 60-GHz complementary metal-oxide-semiconductor transceiver
Design of antenna with broadband and high gain at millimetre-wave band
Design and Comparison of FFT VLSI Architectures for SoC Telecom Applications with Different Flexibility, Speed and Complexity Trade-Offs
Designed Glucopeptides Mimetics of Myelin Protein Epitopes As Synthetic Probes for the Detection of Autoantibodies, Biomarkers of Multiple Sclerosis
Design, modeling, and testing of a novel 6-DOF micropositioning stage with low profile and low parasitic motion
Design of a Portable, Intrinsically Safe Multichannel Acquisition System for High-Resolution, Real-Time Processing HD-sEMG
Design of the OPUS School Meal Study: A randomised controlled trial assessing the impact of serving school meals based on the New Nordic Diet
Design of innovative power conditioning system for the grid integration of thermoelectric generators
Design and Fabrication of AlN/GaN Heterostructures for Intersubband Technology
Design of zone-based bandwidth management scheme in IEEE 802.16 multi-hop relay networks
Design of CMOS compatible and compact, thermally-compensated electro-optic modulator based on off-axis microring resonator for dense wavelength division multiplexing applications
Design of Leakage Inductance in Resonant DC-DC Converter for Electric Vehicle Charger
Designing a survey protocol to overcome the Wallacean shortfall: a working guide using bryophyte distribution data on Terceira Island (Azores)
Design of a capacitance sensor for void fraction measurement in annular flows through a vertical pipe
Designing carbohydrate nanoparticles for prolonged efficacy of antimicrobial peptide
Design of a triangular platform piezoresistive affinity microcantilever sensor for biochemical sensing applications
Design, synthesis, molecular docking and 3D-QSAR studies of potent inhibitors of enoyl-acyl carrier protein reductase as potential antimycobacterial agents
Design and optimization of lipid-modified poly(amidoamine)dendrimer coated iron oxide nanoparticles as probes for biomedical applications
Design of deformable chitosan microspheres loaded with superparamagnetic iron oxide nanoparticles for embolotherapy detectable by magnetic resonance imaging
Design of etch holes to compensate spring width loss for reliable resonant frequencies
Design, Synthesis, Biological Activity, and ADME Properties of Pyrazolo[3,4-d]pyrimidines Active in Hypoxic Human Leukemia Cells: A Lead Optimization Study
Design and Implementation of a Telecare Information Platform
Designing of RFID-Based Sensor Solution for Packaging Surveillance Applications
Designing nanoscopic, fluxional bimetallic Pt-Ru alloy hydrogenation catalysts for improved sulfur tolerance
Design of coplanar waveguide ultrawideband bandpass filter using stub-loaded resonator with notched band
Designing an intelligent ontological system for traffic light control in isolated intersections
Design, performance and manufacturing analysis for a compact permeator
Design analysis of a lead-lithium/supercritical CO2 Printed Circuit Heat Exchanger for primary power recovery
Design and FESEM/EDX investigation of functional magnetic nanocomposite particles
Design issues in Balanced Scorecards: The "what" and "how" of control
Designing and operating a cold-flow model of a 100 kW chemical-looping combustor
Design of cascade with locally enlarged flow for enrichment of intermediate components of multi-isotope mixtures
Design and test of current limiting modules using YBCO-coated conductors
Design and realization of a novel sun tracking system with absorber displacement for parabolic trough collectors
Design of an Omnidirectional Polarized RFID Tag Antenna for Safety Glass Applications
Design and Implementation of an Adaptive PI Fuzzy Controller to Improve the Speed Control of Induction Motor
Design and implementation of a 2-DOF PID compensation for magnetic levitation systems
Design of a Low-cost Underwater Wireless Sensor Network for Water Quality Monitoring
Design of a Hybrid (Wired/Wireless) Acquisition Data System for Monitoring of Cultural Heritage Physical Parameters in Smart Cities
Design, Synthesis, and Biological Evaluation of New 5-HT(4) Receptor Agonists: Application as Amyloid Cascade Modulators and Potential Therapeutic Utility in Alzheimer's Disease
Design and analysis of an internally cooled smart cutting tool for dry cutting
Design and characterization of novel beta-cyclodextrin based copolymer materials
Design Scenarios: Enabling transparent parametric design spaces
Design of a high efficiency wide-band 60 degrees bend for TE polarization
Design and stability analysis of adaptive fuzzy feedback controller for nonlinear systems by Takagi-Sugeno model-based adaptation scheme
Design of experiments for Malachite Green dye removal from wastewater using thermolysis - coagulation-flocculation
Designing surface plasmon resonance of subwavelength hole arrays by studying absorption
Design and synthesis of new 4-pyrazolin-3-yl-1,2,3-triazoles and 1,2,3-triazol-4-yl-pyrazolin-1-ylthiazoles as potential antimicrobial agents
Design and Development of a Low-Cost Divided-Bar Apparatus
Design Parameters for Tuning the Type 1 Cu Multicopper Oxidase Redox Potential: Insight from a Combination of First Principles and Empirical Molecular Dynamics Simulations
Design and Performance of a Laboratory Spray Dryer to Realize Evaporation-Induced Self-Assembly of Nanoparticles
Design and optimization of an equilibrium reload with MOX fuel with minor actinides
Design of an integrated coupler for the electrical generation of surface plasmon polaritons
Design and implementation of a VSC for interconnection with power grids, using the method of identification the system through state space for the calculation of controllers
Design and Implementation of Fuzzy Policy Gradient Gait Learning Method for Walking Pattern Generation of Humanoid Robots
Design and optimization of protein refolding with crossflow ultrafiltration
Design and simulation of a heat pump for simultaneous heating and cooling using HFC or CO2 as a working fluid
Design and Optimization of a Semicontinuous Hot-Cold Extraction of Polyphenols from Grape Pomace
Design and performance analysis of double-gate MOSFET over single-gate MOSFET for RF switch
Design study of distributed pumping system using multilayer NEG strips for particle accelerators
Design of a Protective Single-Dose Intranasal Nanoparticle-Based Vaccine Platform for Respiratory Infectious Diseases
Design and development of polyamine polymer for harvesting microalgae for biofuels production
Design, synthesis and evaluation of novel zwitterionic compounds as PPAR alpha/gamma dual agonists (1)
Design, synthesis, ADME characterization and antileishmanial evaluation of novel substituted quinoline analogs
Design and simulation of few-cycle optical parametric chirped pulse amplification at mid-IR wavelengths
Design and evaluation of new hybrid pharmacophore quinazolino-tetrazoles as anticonvulsant strategy
Design and principles of an innovative compliant fast tool servo for precision engineering
Design and Simulation of Optical Unguided Bus Interconnect
Design of a mutual authentication based on NTRUsign with a perturbation and inherent multipoint control protocol frames in an Ethernet-based passive optical network
Design and Experimental Evaluation of Miniaturized Monopole UHF RFID Tag Antennas
Design and Analysis of Position Tracking Observer Based on Instantaneous Power for Sensorless Drive of Permanent Magnet Synchronous Motor
Design and synthesis of new potassium channel activators derived from the ring opening of diazoxide: Study of their vasodilatory effect, stimulation of elastin synthesis and inhibitory effect on insulin release
Design optimization of a polygeneration plant fuelled by natural gas and renewable energy sources
Design verification methodology for a solenoid valve for industrial applications
Design and Implementation of Fuzzy Logic Controller for Online Computer Controlled Steering System for Navigation of a Teleoperated Agricultural Vehicle
Design of a flat glass furnace waste heat power generation system
Design and Analysis of Rhesus Cytomegalovirus IL-10 Mutants as a Model for Novel Vaccines against Human Cytomegalovirus
Design of Herringbone Groove Disk Damper for Effective Suppression of Axial Vibration of Disk in Hard Disk Drive
Design of a Flow Transmitter Using an Improved Inductance Bridge Network and Rotameter as Sensor
Design for maintenance: how KMS document linking decisions affect maintenance effort and use
Designing a Type I Interferon Signaling Phagosome
Designing Supramolecular Liquid-Crystalline Hybrids from Pyrenyl-Containing Dendrimers and Arene Ruthenium Metallacycles
Design studies and testing of a torque transducer
Design and Synthesis of Transition Metal and Inner Transition Metal Binding Calixarenes
Design and behavior study of a grammar-guided genetic programming algorithm for mining association rules
Design and In Situ Characterization of Lipid Containers with Enhanced Drug Retention
Design of Adaptive Highly Efficient GaN Power Amplifier for Octave-Bandwidth Application and Dynamic Load Modulation
Designing Phenotyping Studies for Genetically Engineered Mice
Design, synthesis, in silico and in vitro screening of 1,2,4-thiadiazole analogues as non-peptide inhibitors of beta-secretase
Design, Construction, and Modeling of a Flexible Rotor Active Magnetic Bearing Test Rig
Design and biomechanical testing of pedicle screw for osteoporotic incidents
Design of grafted copper complex in mesoporous silica in defined coordination, hydrophobicity and confinement states
Design and Implementation of a Broadband Single Layer Circularly Polarized Reflectarray Antenna
Designing polyHEMA substrates that mimic the viscoelastic response of soft tissue
Design and preclinical characterization of a novel vaccine adjuvant formulation consisting of a synthetic TLR4 agonist in a thermoreversible squalene emulsion
Design and thermodynamic analysis of an H2O-LiBr AHP system for naval surface ship application
Design and promotion of an outdoor gym for older adults: a collaborative project
Design method of planar three-degrees-of-freedom serial compliance device with desired compliance characteristics
Design and fabrication of linear pixel arrays for organic photovoltaic modules to achieve scalable power output
Design, Synthesis and Structure-Activity Relationship of New Arginine Vasopressin Analogues Containing Proline Derivatives in Position 2
Design of active and stable NiCeO2ZrO2MgAl2O4 dry reforming catalysts
Design Methodology for a Reactively Loaded Yagi-Uda Antenna
Designing a Public Square for Research Computing
Design and NMR Studies of Cyclic Peptides Targeting the N-Terminal Domain of the Protein Tyrosine Phosphatase YopH
Designing the Ideal Uranyl Ligand: a Sterically Induced Speciation Change in Complexes with Thiophene-Bridged Bis(3-hydroxy-N-methylpyridin-2-one)
Design and implementation of decentralised supervisory control for manufacturing system automation
Design, synthesis, and antiviral activity of novel rutin derivatives containing 1, 4-pentadien-3-one moiety
Designing a Reverse Logistics Network for End-of-Life Vehicles Recovery
Design, Synthesis, and in Vitro Activity of Novel 2 %26apos;-O-Substituted 15-Membered Azalides
Design of optimal multiphase reactors exemplified on the hydroformylation of long chain alkenes
Design and control of robot manipulator with a distributed actuation mechanism
Design of a novel phasor measurement unit-based transmission line auto reclosing scheme
Design and Fabrication of Regenerable Polyelectrolyte Multilayers for Applications in Foulant Removal
Design and Development of a Human Respiratory Sound Acquisition and Monitoring System Using Bluetooth Wireless Technology
Design of Cluster-free Polymer Electrolyte Membranes and Implications on Proton Conductivity
Design Aspects of Nonlinear Vibration Analysis of Rectangular Orthotropic Membranes
Design and Implementation of an LED Mood Lighting System Using Personalized Color Sequence Generation
Desiccation tolerance and natural cold acclimation allow cryopreservation of bryophytes without pretreatment or use of cryoprotectants (vol 113, pg 760, 2010)
Design and implementation of interleaved boost converter for fuel cell systems
Design and realization of a welding oscillator
Design, synthesis and antiproliferative activities of biarylolefins based on polyhydroxylated and carbohydrate scaffolds
Designing control system with entropic modeling
Design of a Discrete-Time Linear Control Strategy for a Multicell UPQC
Design of Observers With Error Limitation in Discrete-Time Descriptor Systems: A Case Study of a Hydraulic Tank System
Design principles of interconnections between chromatin and pre-mRNA splicing
Design and Implementation of a Genomics Field Trip Program Aimed at Secondary School Students
Design of biomolecular network modifications to achieve adaptation
Design principles of cell circuits with paradoxical components
Design Heuristics for Authentic Simulation-Based Learning Games
Design plan and requirement of test module and testing items in IFMIF
Design of an off-axis see-through display based on a dynamic phase correction approach
Designing a sustainable strategy for malaria control?
Design and Development of a Biaxial Tensile Test Device for a Thin Film Specimen
Design and Evaluation of HP-beta-CD Based Voriconazole Formulations for Ocular Drug Delivery
Design and Characterization of a Theta-Pinch Imploding Thin Film Plasma Source for Atomic Emission Spectrochemical Analysis
Design, synthesis and 3D-QSAR studies of new diphenylamine containing 1,2,4-triazoles as potential antitubercular agents
Design paper: The CapOpus trial: A randomized, parallel-group, observer-blinded clinical trial of specialized addiction treatment versus treatment as usual for young patients with cannabis abuse and psychosis
Design and testing of a MRF rotational damper for vehicle applications
Design of a Hybrid Integrated EMC Filter for a DC-DC Power Converter
Design and Implementation of a DSP Based Dual-Loop Capacitor Voltage Control of the Z-Source Inverter
Design, synthesis, synergistic antimicrobial activity and cytotoxicity of 4-aryl substituted 3,4-dihydropyrimidinones of curcumin
Design and optimization of clotrimazole-hydroxypropyl-beta-cyclodextrin bioadhesive vaginal tablets using Anacardium occidentale gum by 3(2) factorial design
Design of clinical trials of gene therapy in Parkinson disease
Designing optimal controllers for doubly fed induction generators using a genetic algorithm
Design of all-optical high-order temporal integrators based on multiple-phase-shifted Bragg gratings
Design of the injection beamline for the Californium Rare Isotope Breeder Upgrade electron beam ion source charge breeder
Designing coupled-resonator optical waveguides based on high-Q tapered grating-defect resonators
Design and implementation of zero-voltage-switching quasi-resonant positive-output Luo converter using analog resonant controller UC3861
Design of Sustained Release Tablet Containing Fucoidan
Design of an efficient terahertz source using triply resonant nonlinear photonic crystal cavities
Design, synthesis and characterization of zinc-morin, a metal flavonol complex and evaluation of its antidiabetic potential in HFD-STZ induced type 2 diabetes in rats
Designing Effective Health Communications: A Meta-Analysis
Design of an optofluidic biosensor using the slow-light effect in photonic crystal structures
Design of phenotypic screens for bioactive chemicals and identification of their targets by genetic and proteomic approaches
Design, Synthesis, and Biological Evaluation of Thiazoles Targeting Flavivirus Envelope Proteins
Design of conservation strategies for climate adaptation
Design of experiment techniques for fuel cell characterisation and development
Design and application of a confocal microscope for spectrally resolved anisotropy imaging
Design of all-glass multilayer phase gratings for cylindrical microlenses
Design of NIDA CTN Protocol 0047: Screening, Motivational Assessment, Referral, and Treatment in Emergency Departments (SMART-ED)
Design Consideration of Magnetic Tunnel Junctions for Reliable High-Temperature Operation of STT-MRAM
Designing a Red Persistent Luminescence Phosphor: The Example of YPO4:Pr3+,Ln(3+) (Ln = Nd, Er, Ho, Dy)
Design of a large-scale femtoliter droplet array for single-cell analysis of drug-tolerant and drug-resistant bacteria
Design of postmetallocene catalytic systems of arylimine type for olefin polymerization: XVI. Synthesis of (N-aryl)salicylaldimines containing pent-4-enyloxy group and their complexes with titanium(IV) dichloride
Design, synthesis and structure activity relationships of spirocyclic compounds as potent CCR1 antagonists
Design considerations for elastomeric normally closed microfluidic valves
Design of Aqueous Processed Thick LiFePO4 Composite Electrodes for High-Energy Lithium Battery
Design and Application of In Vivo FRET Biosensors to Identify Protein Prenylation and Nanoclustering Inhibitors
Design, Synthesis, and Characterization of Peptide-Based Rab Geranylgeranyl Transferase Inhibitors
Design and fabrication of subwavelength nanogratings based light-emitting diodes
Design and performance of a simple, room-temperature Ga2O3 nanowire gas sensor
Design and Analysis of Low-Voltage Low-Parasitic ESD Protection for RF ICs in CMOS
Design and development of nanoemulsion drug delivery system of amlodipine besilate for improvement of oral bioavailability
Design and characterization of novel hybrid antimicrobial peptides based on cecropin A, LL-37 and magainin II
Design, synthesis and antihypertensive screening of novel pyridazine substituted s-triazin-2-imine/one/thione derivatives
Design, synthesis and characterization of a peptide able to bind proteins of the KCTD family: implications for KCTD - cullin 3 recognition
Design of an Optical Sensor for Determination of Bismuth
Design, construction, and validation of an MRI-compatible vibrotactile stimulator intended for clinical use
Designed recombinant adenovirus type 5 vector induced envelope-specific CD8(+) cytotoxic T lymphocytes and cross-reactive neutralizing antibodies against human immunodeficiency virus type 1
Design, Implementation, and Characterization of a Cooperative Communications System
Designing a ligand for pharmaceutical purposes
Designing and Analyzing Studies That Randomize Schools to Estimate Intervention Effects on Student Academic Outcomes Without Classroom-Level Information
Designing your sample efficiently: clustering effects in education surveys
Design of Maximally Sparse Antenna Arrays in the Presence of Mutual Coupling
Design of a Monolithic Dual Emission InGaN Based White Light-Emitting Diode
Design of RF Properties for Vertical Nanowire MOSFETs
Design Strategy of Serial Manipulators With Certified Constraint Satisfaction
Design of Highly Integrated Organic Nanodevice
Design, Development, and Optimization of Polymeric Based-Colonic Drug Delivery System of Naproxen
Design, Synthesis, and Molecular Docking Study of Flavonol Derivatives as Selective JAK1 Inhibitors
Design and performance evaluation of SSSC supplementary modulation controller in power systems using SPEF method
Design of circular monopole antenna with symmetrically folded stub for WLAN operation
Design and fabrication of a robotic mechanism for remote steering and positioning of interventional devices
Design and Analysis of Fuel-Cell Hybrid Systems Oriented to Automotive Applications
Design, synthesis, and biological evaluation of potent thiosemicarbazone based cathepsin L inhibitors
Design, Synthesis and Antitumor Activity of Novel Indolin-2-one Derivatives Containing 4-Thiazolidinone Moiety
Design, synthesis, and biological evaluation of novel coxsackievirus B3 inhibitors
Design of a Lab-Scale Rotary Cavity-Type Solar Reactor for Continuous Thermal Dissociation of Volatile Oxides Under Reduced Pressure
Design, Synthesis, and Biological Evaluation of Unconventional Aminopyrimidine, Aminopurine, and Amino-1,3,5-triazine Methyloxynucleosides
Design logic of a cannabinoid receptor signaling network that triggers neurite outgrowth
Design of 60-and 77-GHz narrow-bandpass filters in CMOS technology
Design of 60 GHz millimetre-wave bandpass filter on bulk CMOS
Design, synthesis, and biological evaluation of callophycin A and analogues as potential chemopreventive and anticancer agents
Design of an AC-DC-AC converter for wind turbines
Design and fabrication of ZnO/TiO2-based thin-film inverter circuits using solution processing techniques
Desiccation-tolerance in lichens: a review
Designing a Multimer Allergen for Diagnosis and Immunotherapy of Dog Allergic Patients
Designing adsorbents for CO(2) capture from flue gas-hyperbranched aminosilicas capable,of capturing CO(2) reversibly
Design Implications of Single Event Transients in a Commercial 45 nm SOI Device Technology
Design of a Sea-level Tsunami Detection Network for the Gulf of Cadiz
Desialylation improves the detection of recombinant erythropoietins in urine samples analyzed by SDS-PAGE
Design and evaluation of aspirin-loaded water-in-oil-in-water submicron multiple emulsions generated using two-stage ultrasonic cavitational emulsification technique
Design of small molecules targeting transcriptional activation by NF-kappa B: overview of recent advances
Design of an amperometric xanthine biosensor based on a graphite transducer patterned with noble metal microparticles
Desire Thinking across the Continuum of Drinking Behaviour
Design and Implementation of Two-Layer Compact Wideband Butler Matrices in SIW Technology for Ku-Band Applications
Design, synthesis and antiproliferative activity of urocanic-chalcone hybrid derivatives
Design and optimisation of dual-mode heat pump systems using natural fluids
Design and Synthesis of a Fluorescently End-Labeled Poly(beta-amino ester): Application to the Characterization of Degradable Polyelectrolyte Multilayers
Design of the Grand Touring sports car wing
Design and analysis of a meandered multiband antenna based on split ring resonator
Design of a Tumor Homing Cell-Penetrating Peptide for Drug Delivery
Design and fabrication of a COP-based microfluidic chip: Chronoamperometric detection of Troponin T
Design, Synthesis, and Biological Characterization of a Caspase 3/7 Selective Isatin Labeled with 2-[F-18]fluoroethylazide
Design space approach in the optimization of the spray-drying process
Design, synthesis, and stereochemical evaluation of a novel chiral amine-palladacycle
Designing clinical trials to improve neurobehavioral outcome after traumatic brain injury: From bench to bedside
Design of recombinant antibody microarrays for urinary proteomics
Design of Experiment (DoE) as a Tool for the Optimization of Source Conditions in SEC-ESI-MS of Functional Synthetic Polymers Synthesized via ATRP
Design of a Novel Fluidized Bed Reactor To Enhance Sorbent Performance in CO2 Capture Systems Using CaO
Designing Appropriate Blended Courses: A Students' Perspective
Design, synthesis and biological evaluation of potent NAD(+)-dependent DNA ligase inhibitors as potential antibacterial agents. Part I: Aminoalkoxypyrimidine carboxamides
Design principles for corporate venture transition processes in established technology firms
Design, synthesis, and structure-activity relationship studies of thiophene-3-carboxamide derivatives as dual inhibitors of the c-Jun N-terminal kinase
Design and Characterization of a Potent and Selective Dual ATP- and Substrate-Competitive Subnanomolar Bidentate c-Jun N-Terminal Kinase (JNK) Inhibitor
Designed to linger
Design and validation of a multiphase 3D model to simulate tropospheric pollution
Design and Analysis of Adaptive Processor
Design and analysis of a compact fast parallel multiplier for high speed DSP applications using novel partial product generator and 4 : 2 compressor
Design of aromatic heteropolycyclics containing borole frameworks
Design and analysis of an automated order-picking workstation
Design, synthesis and evaluation of 3-(imidazol-1-ylmethyl)indoles as antileishmanial agents. Part II
Design, Synthesis & Biological Evaluation of Some Novel Quinazolinone Scaffolds
Design of Phosphor-Free Single-Chip White Light-Emitting Diodes Using InAlGaN Irregular Multiple Quantum Well Structures
Designing prodrugs for the treatment of Parkinson's disease
Design, Fabrication, and Performance of a Piezoelectric Uniflex Microactuator
Design, Synthesis, and Biological Evaluation of Novel Disubstituted Dibenzosuberones as Highly Potent and Selective Inhibitors of p38 Mitogen Activated Protein Kinase
Design of DC/DC bidirectional converter based on DSP in renewable energy
Design of High-Efficiency Bidirectional DC-DC Converter and High-Precision Efficiency Measurement
Design approach for high-bandwidth low-power three-stage operational amplifiers
Design optimization of active scanning probe using parallel link mechanism
Design, R&D and assessment of performance of the JT-60SA upper divertor
Design of lower divertor for JT-60SA
Design guidelines for H-Darrieus wind turbines: Optimization of the annual energy yield
Design of a real time automatic speech recognition system using Modified One Against All SVM classifier
Designing, Structural Elucidation, Comparison of DNA Cleavage, and Antibacterial Activity of Metal(II) Complexes Containing Tetradentate Schiff Base
Designing context-sensitive systems An integrated approach
Design and optimization of artificial cultivation units for algae production
Design and Synthesis of ATP-Based Nucleotide Analogues and Profiling of Nucleotide-Binding Proteins
Designing and validation of new primers for efficient genotyping of animal G3 rotaviruses
Designing dendrimers for ocular drug delivery
Design and performance evaluation of a photovoltaic sun-tracking system driven by a three-freedom spherical motor
Design of short pulse laser driven opacity experiments
Designing Science Learning in the First Years of Schooling. An intervention study with sequenced learning material on the topic of `floating and sinking'
Design of Shape Memory Alloy-Based and Tendon-Driven Actuated Fingers Towards a Hybrid Anthropomorphic Prosthetic Hand
Design of multiplier-less nonuniform filter bank transmultiplexer using genetic algorithm
Design of non-uniform filter bank transmultiplexer with canonical signed digit filter coefficients
Design study for transmission improvement of resonant surface plasmons using dielectric diffraction gratings
Design guidelines for thermo-photo-voltaic generator: The critical role of the emitter size
Design Considerations of Ring-Type Magnets
Design Strategies To Improve the Sensitivity of Photoactive Metal Carbonyl Complexes (photoCORMs) to Visible Light and Their Potential as CO-Donors to Biological Targets
Design, Synthesis and Activity Prescreening of Small Molecule-Peptide Conjugates as HIV-1 Fusion Inhibitors Targeting gp41
Design of a novel HIV-1 fusion inhibitor that displays a minimal interface for binding affinity
Design of Switching Multiobjective Controller: A New Approach
Designing of MIP based QCM sensor having thymine recognition sites based on biomimicking DNA approach
Design and Synthesis of Some Novel Quinoline Derivatives as Anticancer and Radiosensitizing Agents Targeting VEGFR Tyrosine Kinase
Design Aspects of Focal Beams From High-Intensity Arrays
Design of Polarization-Independent Si-Wire-Waveguide Wavelength Demultiplexer for Optical Network Unit
Design of a neurally plausible model of fear learning
Design theory and vibration characteristics of a contact head slider
Design, Synthesis, and Characterization of a Highly Effective Hog1 Inhibitor: A Powerful Tool for Analyzing MAP Kinase Signaling in Yeast
Design, Synthesis and Cytotoxic Activity Evaluation of New Aminosubstituted Benzofurans
Design of Heating Cycle in Hydrogen Annealing Furnaces
Design, synthesis and evaluation of novel HDAC inhibitors as potential antitumor agents
Design of in Vitro Symmetric Complexes and Analysis by Hybrid Methods Reveal Mechanisms of HIV Capsid Assembly
Design, Synthesis, and Spectroscopic Properties of Extended and Fused Pyrrolo-dC and Pyrrolo-C Analogs
Design of die forging process of thrust shaft for large marine diesel engine using floating die concept
Design and Analysis of the Community Youth Development Study Longitudinal Cohort Sample
Design and synthesis of a multivalent fluorescent folate-calix[4]arene conjugate: cancer cell penetration and intracellular localization
Design and evaluation of a wireless electronic health records system for field care in mass casualty settings
Designation of Pseudobiotus kathmanae Nelson, Marley & Bertolani, 1999 as the type species for the genus Pseudobiotus Nelson, 1980 (Tardigrada)
Design and performance analysis of MAC schemes for Wireless Sensor Networks Powered by Ambient Energy Harvesting
Design Considerations of Sub-mW Indoor Light Energy Harvesting for Wireless Sensor Systems
Design of an inhalable dry powder formulation of DOTAP-modified PLGA nanoparticles loaded with siRNA
Design and Control of a Heat-Integrated Reactive Distillation Process to Produce Methanol and n-Butyl Acetate
Design of a randomized controlled study of a multi-professional and multidimensional intervention targeting frail elderly people
Design of bacteria-agglutinating peptides derived from parotid secretory protein, a member of the bactericidal/permeability increasing-like protein family
Design rule for optimization of microelectrodes used in electric cell-substrate impedance sensing (ECIS)
Designs of apertureless probe with nano-slits for near-field light localization and concentration
Designed Auto-assembly of Nanostreptabodies for Rapid Tissue-specific Targeting in Vivo
Design of a reversible biotin analog and applications in protein labeling, detection, and isolation
Desipramine Inhibits the Growth of a Mouse Skin Squamous Cell Carcinoma Cell Line and Affects Glucocorticoid Receptor-Mediated Transcription
Design of Robust Superdirective Arrays With a Tunable Tradeoff Between Directivity and Frequency-Invariance
Designing research into the effects of grammar correction in L2 writing: Not so straightforward
Design, synthesis and inhibitory activity against Mycobacterium tuberculosis thymidine monophosphate kinase of acyclic nucleoside analogues with a distal imidazoquinolinone
Design and application of genetically encoded biosensors
Design and analysis of an outpatient orthopaedic clinic performance with discrete event simulation and design of experiments
Design optimization of a safety-instrumented system based on RAMS plus C addressing IEC 61508 requirements and diverse redundancy
Design of high-sensitive biosensor based on cavity-waveguides coupling in 2D photonic crystal
Designing Lubricant-Impregnated Textured Surfaces to Resist Scale Formation
Design and synthesis of carbohydrate based medium sized sulfur containing benzannulated macrocycles: applications of Sonogashira and Heck coupling
Design of supramolecular metal complex catalytic systems for petrochemical and organic synthesis
Designing the fiber volume ratio in SiC fiber-reinforced SiC ceramic composites under Hertzian stress
Design and evaluation of flow distributors for microfabricated pillar array columns
Design of industrial crystallization of interferon gamma: Phase diagrams and solubility curves
Design and Synthesis of an Orally Bioavailable and Selective Peptide Epoxyketone Proteasome Inhibitor (PR-047)
Designing plasmas for chronic wound disinfection
Design, sorption behaviour and energy management in a sodium alanate-based lightweight hydrogen storage tank
Design of novel anaplastic lymphoma kinase (ALK) inhibitors based on predictive 3D QSAR models using different alignment strategies
Design for learning: deconstructing virtual patient activities
Designing and evaluating library leadership programs: improving performance and effectiveness
Design issues in a randomized controlled trial of a pre-emptive versus empiric antifungal strategy for invasive aspergillosis in patients with high-risk hematologic malignancies
Design and Performance Analysis of a Subnanosecond Pulse Generator
Design of a 2 Mbps FSK near-field transmitter for wireless capsule endoscopy
Design of a Microbreather for Two-Phase Microchannel Heat Sinks
Design Considerations for a Microfluidic Device to Quantify the Platelet Adhesion to Collagen at Physiological Shear Rates
Design, synthesis and biological evaluation of novel diphenylthiazole-based cyclooxygenase inhibitors as potential anticancer agents
Design and simulation challenges for FERMI@elettra
Design equation for predicting fire resistance of reinforced concrete columns
Design of an equilibrium core 1000 MWt Sodium-Cooled Heterogeneous Innovative Burner Reactor
Design of the Physical exercise during Adjuvant Chemotherapy Effectiveness Study (PACES): A randomized controlled trial to evaluate effectiveness and cost-effectiveness of physical exercise in improving physical fitness and reducing fatigue
Design and fabrication of field-effect biosensors for biochemical detection
Design and Methods for a Pilot Study of a Phone-Delivered, Mindfulness-Based Intervention in Patients with Implantable Cardioverter Defibrillators
Design, Evaluation and Structure-Activity Relationship Studies of the AChE Reactivators Against Organophosphorus Pesticides
Designing robust coverage networks to hedge against worst-case facility losses
Design of online survey system with an advanced IPA discrimination index for customer satisfaction assessment
Design of a comb-type self-oscillating gel
Design and simulation of passive mixing in microfluidic systems with geometric variations
Design and robustness analysis of structurally decoupled 3-DoF MEMS gyroscope in the presence of worst-case process tolerances
Designing Waterproof Breathable Materials Based on Electrospun Nanofibers and Assessing the Performance Characteristics
Design of a Superconducting Magnet System for the AEGIS Experiment at CERN
Designing a three-dimensional alginate hydrogel by spraying method for cartilage tissue engineering
Design of postmetallocene Schiff base-like catalytic systems for polymerization of olefins: XII. Synthesis of tetradentate bis-salicylaldehyde imine ligands
Design of a methodological quality scale for prognostic studies
Design of Blood Pressure Measurement with a Health Management System for the Aged
Design of a 30 T Superconducting Magnet Using a Coated Conductor Insert
Design of universal cancer vaccines using natural tumor vessel-specific antigens (SANTAVAC)
Design and Performance of a Solar Photobioreactor Utilizing Spatial Light Dilution
Designing Short Peptides with High Affinity for Organic Molecules: A Combined Docking, Molecular Dynamics, And Monte Carlo Approach
Design and Synthesis of Potent Inhibitor of Apoptosis (IAP) Proteins Antagonists Bearing an Octahydropyrrolo[1,2-a]pyrazine Scaffold as a Novel Proline Mimetic
Design of a Circularly Polarized Tag Antenna for Increased Reading Range
Design of Energy Scavengers of Structural Health Monitoring Systems Using Genetically Optimized Neural Network Systems
Design and Validation of the Dispositional Optimism/Pesimism Scale-EOP
Design of catalyst layers by using paper-like fiber/metal nanocatalyst composites for efficient NOX reduction
Designing, perfecting, and evaluation of a newly developed tribometer for the study of the wear behaviour of forging dies
Design and Fabrication of 10-/40-Gb/s, Uncooled Electroabsorption Modulator Integrated DFB Laser With Butt-Joint Structure
Design of Fast and Efficient Energy-Aware Gradient-Based Scheduling Algorithms for Heterogeneous Embedded Multiprocessor Systems
Design aspects of poly(alkylcyanoacrylate) nanoparticles for drug delivery
Design, Synthesis, and Structure-Activity Relationships of 3-Ethynyl-1H-indazoles as Inhibitors of the Phosphatidylintositol 3-Kinase Signaling Pathway
Design of polyglycidol-containing microspheres for biomedical applications
Designing to Develop Disciplinary Dispositions: Modeling Natural Systems
Design and Baseline Data of a Randomized Trial to Evaluate Coverage and Frequency of Mass Treatment with Azithromycin: The Partnership for Rapid Elimination of Trachoma (PRET) in Tanzania and The Gambia
Design, Data Analysis, and Simulation of in Vitro Drug Transport Kinetic Experiments Using a Mechanistic in Vitro Model
Design of a trigeneration system using a high-temperature fuel cell
Design of a compact reversible fault tolerant field programmable gate array: A novel approach in reversible logic synthesis
Design of an osmotic pressure sensor for sensing an osmotically active substance
Design theory in offshore fish cage designing
Design recommendations for smart energy monitoring: A case study in Italy
Designing colloidal structures for micro and macro nutrient content and release in foods
Designs of biased Stark guides for polar molecules
Desire for perioperative information and parental ethnicity
Designing cell lines for viral vaccine production: Where do we stand?
Design and Synthesis of Highly Sensitive Fluorogenic Substrates for Glutathione S-Transferase and Application for Activity Imaging in Living Cells
Design, Synthesis, and Cytotoxic Evaluation of Acyl Derivatives of 3-Aminonaphtho[2,3-b]thiophene-4,9-dione, a Quinone-Based System
Design of a Novel Test Fixture to Measure Rotational Core Losses in Machine Laminations
Design and Synthesis of a Multivalent Heterobifunctional CD22 Ligand as a Potential Immunomodulator
Design, synthesis, characterization, antioxidant and in vitro cytotoxic activities of novel coumarin thiazole derivatives
Design and analysis of antioxidant compounds from Andes Berry fruits (Rubus glaucus Benth) using an enhanced-fluidity liquid extraction process with CO2 and ethanol
Designing Video-Based Professional Development for Mathematics Teachers in Low-Performing Schools
Design, synthesis and biological evaluation of novel triaryl (Z)-olefins as tamoxifen analogues
Design of a Novel Homopolar Bearingless Slice Motor With Reluctance Rotor
Desirable properties of beta(3)-adrenoceptor agonists: Implications for the selection of drug development candidates
Design of Mass Exchange Network and Effluent Distribution System for effective water management
Design and fabrication of a screw-driven multi-channel peristaltic pump for portable microfluidic devices
Design and Layout Effects on SET Propagation in 90-nm ASIC and FPGA Test Structures
Design of a Novel Low-Cost and Long-Stroke Co-Planar Stage for Nanopositioning
Design of sweet protein based sweeteners: Hints from structure-function relationships
Designed to Kill: Novel Menin-MLL Inhibitors Target MLL-Rearranged Leukemia
Design innovation and marketing strategy in successful product competition
Design and realization of a facility for the characterization of Silicon Avalanche PhotoDiodes
Design, methods, and participant characteristics of the Impact of Personal Genomics (PGen) Study, a prospective cohort study of direct-to-consumer personal genomic testing customers
Design and evaluation of a silicon based multi-nozzle for addressable jetting using a controlled flow rate in electrohydrodynamic jet printing
Design and implementation of an automated secondary cooling system for the continuous casting of billets
Designing optimal universal pulses using second-order, large-scale, non-linear optimization
Design of a Peptidic Turn with High Affinity for Hg-II
Design and rationale for Home Blood Pressure Telemonitoring and Case Management to Control Hypertension (HyperLink): A cluster randomized trial
Design and performance of a punch mechanism based pellet injector for alternative injection in the large helical device
Design of Simultaneous Bi-Directional Transceivers Utilizing Capacitive Coupling for 3DICs in Face-to-Face Configuration
Design and synthesis of carbon-11-labeled dual aromatase-steroid sulfatase inhibitors as new potential PET agents for imaging of aromatase and steroid sulfatase expression in breast cancer
Design for Low Power and Reliable Flexible Electronics: Self-Tunable Cell-Library Design
Design and fabrication of microtunnel and Si-diaphragm for ZnO based MEMS acoustic sensor for high SPL and low frequency application
Design of an Effective WSN-Based Interactive u-Learning Model
Design and fabrication of a scanning electron microscope using a finite element analysis for electron optical system
Designer diatom episomes delivered by bacterial conjugation
Design of a process evaluation of the implementation of a physical activity and sports stimulation programme in Dutch rehabilitation setting: ReSpAct
Design and Application of a New Rat-Specific Vacuum Erectile Device for Penile Rehabilitation Research
Design, Synthesis and Docking Studies of a Novel Ciprofloxacin Analogue as an Antimicrobial AGENT
Design, synthesis, and docking studies of novel ofloxacin analogues as antimicrobial agents
Design of a Specific Colonic Mucus Marker Using a Human Commensal Bacterium Cell Surface Domain
Design Core Competence Diagnosis: A Case From the Automotive Industry
Design and Synthesis of Piperazine-Based Task-Specific Ionic Liquids for Liquid-Liquid Extraction of Cu-II, Ni-II, and Co-II from Water
Design of quadrature rules for Muntz and Muntz-logarithmic polynomials using monomial transformation
Desire for psychological support in cancer patients with depression or distress: validation of a simple help question
Design and implementation of an adaptive sliding-mode dynamic controller for wheeled mobile robots
Design choices in imaging speech comprehension: An Activation Likelihood Estimation (ALE) meta-analysis
Design of decentralized controllers for MIMO processes
Design of a Physical and Nontoxic Crosslinked Poly(Vinyl Alcohol) Hydrogel
Design and synthesis of novel N,N '-glycoside derivatives of 3,3 '-diindolylmethanes as potential antiproliferative agents
Design of high-affinity S100-target hybrid proteins
Design, analysis, and testing of a microdot apodizer for the apodized pupil Lyot coronagraph (Research Note) III. Application to extremely large telescopes
Design, analysis, and testing of a microdot apodizer for the apodized pupil Lyot coronagraph II. Impact of the dot size
Design and test of an autonomous sensor for force measurements in human knee implants
Design of Optimized Convolutional and Serially Concatenated Convolutional Codes in the Presence of A-priori Information
Design of Multi-Binding-Site Inhibitors, Ligand Efficiency, and Consensus Screening of Avian Influenza H5N1 Wild-Type Neuraminidase and of the Oseltamivir-Resistant H274Y Variant
Design, creativity and metaphor
Design of a Wideband High-Voltage High-Efficiency BiCMOS Envelope Amplifier for Micro-Base-Station RF Power Amplifiers
Designing Smac-mimetics as antagonists of XIAP, cIAP1, and cIAP2
Design, stereoselective synthesis, and biological evaluation of novel tri-cyclic compounds as inhibitor of apoptosis proteins (IAP) antagonists
Design and Synthesis of Novel Antimicrobial Acyclic and Heterocyclic Dyes and Their Precursors for Dyeing and/or Textile Finishing Based on 2-N-Acylamino-4,5,6,7-tetrahydrobenzo[b]thiophene Systems
Design of Nb3Sn-Based Short Period Model Superconducting Helical Undulator
Design and synthesis of triazolopyrimidine acylsulfonamides as novel anti-mycobacterial leads acting through inhibition of acetohydroxyacid synthase
Designing biological compartmentalization
Designing 2-Phase Prevalence Studies in the Absence of a "Gold Standard" Test
Desire for early retirement and therapy of chronic back pain - Relevance of social medical variables for outpatient psychotherapeutic treatment
Designing microstructure into xanthan gum-enriched acid milk gels
Design and analysis of kinetic energy recovery system for automobiles: Case study for commuters in Edinburgh
Design Optimization of an LPG Thermal Cracker for Multiple Objectives
Design, synthesis and polymerization of highly branched pseudodendrimers through tandem reactions
Design optimization on the drive train of a light-weight robotic arm
Design, assessment, and in vivo evaluation of a computational model illustrating the role of CAV1 in CD4(+) T-Iymphocytes
Design and R%26D for manufacturing the MITICA Neutraliser and Electron Dump
Design and Evaluation of Context-Aware and Location-Based Service Discovery Protocols for Vehicular Networks
Design studies of a high-current radiofrequency quadrupole for accelerator-driven systems programme
Design, development, and acceleration trials of radio-frequency quadrupole
Design of microfission chamber for ITER operations
Design status of ITER visible/IR outer strike point view
Design optimization of a cable-based parallel tracking system by using evolutionary algorithms
Design, modeling and testing of a unidirectional MEMS ring thermal actuator
Design and application of a class of sensors to monitor Ca2+ dynamics in high Ca2+ concentration cellular compartments
Design and Pre-Clinical Evaluation of a Universal HIV-1 Vaccine
Design, synthesis and evaluation of inhibitor of apoptosis protein (IAP) antagonists that are highly selective for the BIR2 domain of XIAP
Desiccation, postharvest maturity and seed aging of tall oat-grass
Design of a PROTAC that antagonizes and destroys the cancer-forming X-protein of the hepatitis B virus
Design and construction of a quality control phantom for SPECT and PET imaging
Design and modeling of low temperature solar thermal power station
Design, synthesis, and Multivariate quantitative structure-activity relationship of Salicylanilides-Potent inhibitors of type III secretion in Yersinia
Design, construction, and calibration of an isothermal titration calorimeter and its application in the study of the adsorption of phenolic compounds
Design of bis(acylamino)triazine containing ruthenium-acetylides as self-complementary supramolecular units
Design of an ultra small passive balun in CMOS 65 nm technology for 60 GHz applications
Design of an On-Chip Balun With a Minimum Amplitude Imbalance Using a Symmetric Stack Layout
Designing for Diversity: The Role of Reading Strategies and Interactive Vocabulary in a Digital Reading Environment for Fifth-Grade Monolingual English and Bilingual Students
Design and synthesis of novel magnolol derivatives as potential antimicrobial and antiproliferative compounds
Design correlations for the optical performance of the particle-diffusing bottom diffusers in the LCD backlight unit
Design Elements in Implementation Research: A Structured Review of Child Welfare and Child Mental Health Studies
Design and implementation of clock network for nanometer FPGA
Design, synthesis and biological evaluation of 5-hydroxy, 5-substituted-pyrimidine-2,4,6-triones as potent inhibitors of gelatinases MMP-2 and MMP-9
Desire to Work as a Death Anxiety Buffer Mechanism
Design, synthesis, and biological evaluation of novel tri- and tetrasubstituted imidazoles as highly potent and specific ATP-mimetic inhibitors of p38 MAP kinase: Focus on optimized interactions with the enzyme's surface-exposed front region
Design optimization of square aluminium damage columns with crashworthiness criteria
Design optimisation of tapered thin-walled square tubes
Design approach of the vacuum vessel and thermal shields towards assembly at the ITER-site
Design progress of the vacuum vessel sectors and ports towards the ITER construction
Design and implementation of an affect-responsive interactive photo frame
Designing and Pricing Menus of Extended Warranty Contracts
Desiccation cracks act as natural seed traps in flood-meadow systems
Design, Synthesis, and Characterization of Mesogenic Amine-Capped Nematic Gold Nanoparticles with Surface-Enhanced Plasmonic Resonances
Designing a Facebook Interface for Senior Users
Design of a variable temperature scanning force microscope
Design of a Surgical Port for Minimally Invasive Beating-Heart Intracardial Procedures
Design and modeling of power system for a fuel cell hybrid switcher locomotive
Design of the DISCovery project: tailored work-oriented interventions to improve employee health, well-being, and performance-related outcomes in hospital care
Design and analysis of a high-performance CNFET-based Full Adder
Design and implementation of a novel sliding mode sensing architecture for capacitive MEMS accelerometers
Design and Evaluation of a Collaborative System That Supports Distributed User Interfaces
Design of a spherical parallel kinematic machine for ankle rehabilitation
Design and synthesis of CK2 inhibitors
Design and Evaluation of an Orthotic Knee-Extension Assist
Designing accessible experiences for older users: user requirement analysis for a railway ticketing portal
Design measures to counteract pressure wave effects in the liquid metal target META:LIC
Design of and data reduction from compact Thomson parabola spectrometers
Design and characterization of TlInSe2 varactor devices
Designing a Web-Based Science Learning Environment for Model-Based Collaborative Inquiry
Design of an emittance exchanger for production of special shapes of the electron beam current
Design of Polymer-Based Gas Sensors
Design of a Planar UWB Dipole Antenna With an Integrated Balun Using Surrogate-Based Optimization
Design of a Microstrip Patch Antenna with Enhanced F/B for WBAN Applications
Design and study of lamivudine oral controlled release tablets
Design and performance of the HVE electrostatic nuclear microprobe
Designing Multiple-Choice Test Items at Higher Cognitive Levels
Design, synthesis, biological evaluation and molecular modelling studies of novel quinoline derivatives against Mycobacterium tuberculosis
Design and development of a self-supported polymer electrolyte fuel cell system with anodic dead-end operation
Design of Cobalt Functionalized Silica with Interparticle Mesoporosity as a Promising Catalyst for VOCs Decomposition
Designing a Multicellular Organotypic 3D Liver Model with a Detachable, Nanoscale Polymeric Space of Disse
Design Techniques for Wideband Discrete-Time Delta-Sigma ADCs With Extra Loop Delay
Design and Implementation of a Lightweight SecurityModel to Prevent IEEE 802.11Wireless DoS Attacks
Design-of-experiment optimization of exhaled breath condensate analysis using a miniature differential mobility spectrometer (DMS)
Design of Deep Beams Using Strut-and-Tie Models-Part I: Evaluating US Provisions and Part II: Design Recommendations Discussion
Design and Implementation of a Fall Monitor System by Using a 3-Axis Accelerometer in a Smart Phone
Design of a Qubit and a Decoder in Quantum Computing Based on a Spin Field Effect
Design, synthesis, and evaluation of 4-(substituted)phenyl-2-thioxo-3,4-dihydro-1H-chromino[4,3-d]pyrimidin-5 -one and 4-(substituted)phenyl-3,4-dihydro-1H-chromino[4,3-d]pyrimidine-2,5-dione analogs as antitubercular agents
Designing Ionic Materials Through Multiobjective Genetic Algorithms
Design choices made by target users for a pay-for-performance program in primary care: an action research approach
Design of a small scale stand-alone solar thermal co-generation plant for an isolated region in Egypt
Design of a digital multiradian phase detector and its application in fusion plasma interferometry
Design and stability analysis of a variable structure adaptive backstepping controller
Designing Co-Crystals of Pharmaceutically Relevant Compounds That Crystallize with Z ' > 1
Designing a decision support model for the LNG market
Designing and analyzing collaboration in a scripted game for vocational education
Design of wind farm layout using ant colony algorithm
Design of modified U1i molecules against HIV-1 RNA
Design of Synthetic Genetic Oscillators Using Evolutionary Optimization
Design of prototype simulation system for driving performance of electromagnetic unmanned robot applied to automotive test
Design and Testing of Kinetic Inductance Detectors Made of Titanium Nitride
Design of silicon-based misonidazole analogues and F-18-radiolabelling
Designing a prototype of the ITER pulse scheduling system
Designing Amphotropic Smectic Liquid Crystals Based on Phosphonium Salts for Partial Ordering of Solutes as Monitored by NMR Spectroscopy
Design and biophysical characterization of novel polycationic epsilon-peptides for DNA compaction and delivery
Design of a high efficiency solar cell with lossless nanoentities atop and embedded in silicon substrate
Design, synthesis and biological evaluation of potent NAD(+)-dependent DNA ligase inhibitors as potential antibacterial agents. Part II: 4-amino-pyrido[2,3-d]pyrimidin-5(8H)-ones
Design and Characterization of a Nanocomposite Pressure Sensor Implemented in a Tactile Robotic System
Designing the future-A reflection of a transdisciplinary case study in Austria
Design and Evaluation on Electric Differentials for Overactuated Electric Ground Vehicles With Four Independent In-Wheel Motors
Design of Water Distribution Networks using a Pseudo-Genetic Algorithm and Sensitivity of Genetic Operators
Design of Er3+-doped chalcogenide glass laser for MID-IR application
Design of silica-based photonic crystal fiber for biosensing applications
Design and synthesis of 4-arylpiperidinyl amide and N-arylpiperdin-3-yl-cyclopropane carboxamide derivatives as novel melatonin receptor ligands
Design of an adaptive high precision clamping system for flexible bodies
Designing usable online stores: A landscape preference perspective
Design of the Precompression Mechanism and Gravity Support for the Central Solenoid Assembly in the JT-60SA Tokamak
Design, Synthesis, and Evaluation of Carnosine Derivatives as Selective and Efficient Sequestering Agents of Cytotoxic Reactive Carbonyl Species
Design and Application of Multimode Substrate Integrated Waveguides in Parallel Multichannel Signaling Systems
Design, Synthesis, and Characterization of alpha-Ketoheterocycles That Additionally Target the Cytosolic Port Cys269 of Fatty Acid Amide Hydrolase
Designing Nordic technology-enhanced learning
Design Improvement of a Single-Phase Brushless Permanent Magnet Motor for Small Fan Appliances
Design, analysis and experimental study of a high-frequency power supply for finish cut of wire-EDM
Design of an Organic Chromophore for P-Type Dye-Sensitized Solar Cells (vol 130, pg 8570, 2008)
Design and experimental characterization of a NiTi-based, high-frequency, centripetal peristaltic actuator
Design, synthesis and characterization of a linear hydrogen bonded homologous series exhibiting reentrant smectic C ordering
Designing Filters for Fast-Known NcRNA Identification
Design, synthesis and pharmacological evaluation of novel azole derivatives of aryl acetic acid as anti-inflammatory and analgesic agents
Design and performance studies of a hybrid voltage regulator with improved energy efficiency
Design and Structure of an Equilibrium Protein Folding Intermediate: A Hint into Dynamical Regions of Proteins
Design of a robust output-feedback-based modified repetitive-control system
Design and analytical modeling of folded waveguide traveling wave tube (Retracted article. See vol. 629, pg. 406, 2011)
Design of an Adaptive Distributed Critical-Care Extensive Response Network (AD-CERN) Using Cooperative Overlay Network
Design and validation of surface-marker clusters for the quantification of joint rotations in general movements in early infancy
Design of peptide standards with the same composition and minimal sequence variation to monitor performance/selectivity of reversed-phase matrices
Design concepts for a continuously rotating active magnetic regenerator
Design and Validation of a Knee Brace With Feedback to Reduce the Rate of Loading
Design, synthesis of 4-aminoquinoline-derived thiazolidines and their antimalarial activity and heme polymerization inhibition studies
Design of micro-retainer to counter-balance spinning seismic proof mass
Design of a Low-Power Coprocessor for Mid-Size Vocabulary Speech Recognition Systems
Design and synthesis of certain mesoionic sydnonyl styrylketones as potential nonsteroidal anti-inflammatory agents
Design Techniques and Architectures for Low-Leakage SRAMs
Design of Interpolation Functions for Subpixel-Accuracy Stereo-Vision Systems
Design of a Detector for Characterizing Neutron Fields for Single-Event Effects Testing
Design of metal oxide nanoparticles: Control of size, shape, crystalline structure and functionalization by aqueous chemistry
Design and implementation of a continuous microwave heating system for ballast water treatment
Design, Synthesis, Biological Evaluation, and NMR Studies of a New Series of Arylsulfones As Selective and Potent Matrix Metalloproteinase-12 Inhibitors
Design of a relay lens with telecentricity in a holographic recording system
Designs and Tolerances of Numerical Aperture 0.8 Objective Lenses for Page-Based Holographic Data Storage Systems
Design and implementation of a patient safety program for a hospital emergency department: how to do it a patient safety culture
Design, fabrication and testing of UHV compatible high power RF devices for lower hybrid current drive system on SST-1 tokamak
Design and investigation of a shape memory alloy actuated gripper
Design, Synthesis, and Pharmacological Evaluation of a Novel Series of Pyridopyrazine-1,6-dione gamma-Secretase Modulators
Design and synthesis of dihydrobenzofuran amides as orally bioavailable, centrally active gamma-secretase modulators
Design and optimization of adaptable BCH codecs for NAND flash memories
Designer governance
Design of a novel hydrogen-syngas catalytic mesh combustor
Design, cytotoxic and fluorescent properties of novel N-phosphorylalkyl substituted E,E-3,5-bis(arylidene)piperid-4-ones
Design and Conduct of Intervention-Based Research among Cancer Survivors
Design, synthesis, structure and binding properties of PDZ binding, cyclic beta-finger peptides
Design and synthesis of ten biphenyl-neolignan derivatives and their in vitro inhibitory potency against cyclooxygenase-1/2 activity and 5-lipoxygenase-mediated LTB4-formation
Design considerations for a farm-scale biogas plant based on pilot-scale anaerobic digesters loaded with rice straw and piggery wastewater
Design-Aware Mask Inspection
Design of MR dampers to prevent progressive collapse of moment frames
Design, Synthesis, and Biological Activity of Hydroxamic Tertiary Amines as Histone Deacetylase Inhibitors
Design, synthesis, and biological activity of a novel series of 2,5-disubstituted furans/pyrroles as HIV-1 fusion inhibitors targeting gp41
Design, Synthesis, and Structure-Activity Relationship of a Novel Series of 2-Aryl 5-(4-Oxo-3-phenethyl-2-thioxothiazolidinylidenemethyl)furans as HIV-1 Entry Inhibitors
Designing web services in health information systems: From process to application level
Design and optimization of drugs used to treat copper deficiency
Design of lipoprotein-adsorbed liposomes retaining Mn-porphyrins for SOD mimic delivery to brains
Design of a tandem target for a simultaneous production of C-11 and F-18 with 18 MeV
Design and manufacture of krypton gas target for (81)Rb production at a 30 MeV cyclotron
Design and evaluation of a carbon-11 gas target having auxiliary cooling fins in the target cavity for the stable production of carbon-11
Designing biomarker studies for head and neck cancer
Design of a double-sided telecentric zoom lens
Design, Synthesis, and Conformational Analysis of Trispyrimidonamides as alpha-Helix Mimetics
Designer crops: optimal root system architecture for nutrient acquisition
Design, Synthesis, and Docking Studies of Peptidomimetics Based on HER2-Herceptin Binding Site with Potential Antiproliferative Activity Against Breast Cancer Cell lines
Design and evaluation of a highly sensitive nanostructure-based surface modification of glassy carbon electrode for electrochemical studies of hydroxychloroquine in the presence of acetaminophen
Designing institutions for governing planetary boundaries - Lessons from global forest governance
Design and Implementation of an Ontology-Based Clinical Reminder System to Support Chronic Disease Healthcare
Design of an asymmetrical flow field-flow fractionation cell with both mean channel and membrane velocities constant
Design of optimum patch shape and size for bonded repair on damaged Carbon fibre reinforced polymer panels
Design of a binding scaffold based on variable lymphocyte receptors of jawless vertebrates by module engineering
Design and synthesis of novel tetrahydronaphthyl azoles and related cyclohexyl azoles as antileishmanial agents
Design and synthesis of novel series of pyrrole based chemotypes and their evaluation as selective aldose reductase inhibitors. A case of bioisosterism between a carboxylic acid moiety and that of a tetrazole
Designs and Analytical Exploitation of Novel Separation Fields
Design, synthesis and antimycobacterial activity of cinnamide derivatives: A molecular hybridization approach
Design of a new multi-phase experimental simulation chamber for atmospheric photosmog, aerosol and cloud chemistry research
Design and optimization of machining fixture layout for end-milling operation
Design and Economic Analysis of the Process for Biodiesel Fuel Production from Transesterificated Rapeseed Oil Using Supercritical Methanol
Designing innovative therapies for neuropathic pain: pros and cons of target-based drug discovery
Design of Cationic Mixed Phosphine/N-Heterocyclic Carbene Palladium(II) pi-Allyl Complexes as Monoligated Phosphine Pd(0) Precatalysts: Synthesis, Structural Studies, Catalysis, and Reactivity
Design and characterization of a new miniaturized rotating disk equipment for in vitro dissolution rate studies
Design, synthesis, and biological evaluation of (E)-styrylbenzylsulfones as novel anticancer agents
Design and Analyses of a Fast Feed-forward Blind Equalizer with Two-Stage Generalized Multilevel Modulus and Soft Decision-Directed Scheme for High-Order QAM Cable Downstream Receivers
Design of sensor networks for instantaneous inversion of modally reduced order models in structural dynamics
Design, Synthesis, and Structure-Activity Relationship of Indole-3-glyoxylamide Libraries Possessing Highly Potent Activity in a Cell Line Model of Prion Disease
Design and characterization of nanoknife with buffering beam for in situ single-cell cutting
Design and Synthesis of Backbone Cyclic Phosphorylated Peptides: The IkB Model
Desire under attack: Attachment orientations and the effects of relationship threat on sexual motivations
Design and quality of ICF-compatible data items for national disability support services
Design and Fabrication of a Novel Electrode-Supported Honeycomb SOFC
Design of synthetic antibody libraries
Design for Interest: Exploratory Study on a Distinct Positive Emotion in Human-Product Interaction
Design of a MGy radiation tolerant resolver-to-digital convertor IC for remotely operated maintenance in harsh environments
Design and implementation of a new fuzzy PID controller for networked control systems
Design study of a superconducting magnet system for the European Synchrotron Radiation Facility
Designing artificial closed land- and space-based ecosystems
Designing frequency-dependent relaxation rates and Lamb shifts for a giant artificial atom
Design of efficient sergeant molecules for chiral induction in nano-porous supramolecular assemblies
Design and development of an integrated device consisting of an independent solar cell with electrical storage capacity
Design and Synthesis of 1,2,3-Triazole-Fused Chiral Medium-Ring Benzo-Heterocycles, Scaffolds Mimicking Benzolactams
Design and implementation of HexBot: A modular self-reconfigurable robotic system
Design and mechanical property analysis of ultrafine grained gears from AA5083 previously processed by equal channel angular pressing and isothermal forging
Design and characterization of an economical Ir-192 hemi-brain small animal irradiator
Design of optical systems for LED road luminaires
Design of low-charge peptide sequences for high-yield formation of titania nanoparticles
Designing Clinical Studies That Take into Account Traditional East Asian Medicine's Systems and Methods - with Focus on Pattern Identification
Design Optimization, Series Production, and Testing of the SIS100 Superconducting Magnets for FAIR
Design of Fully Synthetic, Self-Adjuvanting Vaccine Incorporating the Tumor-Associated Carbohydrate Tn Antigen and Lipoamino Acid-Based Toll-like Receptor 2 Ligand
Design of Plate-Fin Tube Dehumidifiers for Humidification-Dehumidification Desalination Systems
Design and adoption of household tornado shelters for Bangladesh
Design an immobilized lipase enzyme for biodiesel production
Design and synthesis of isoquinolines and benzimidazoles as RAF kinase inhibitors
Desiccation-induced physiological and biochemical changes in resurrection plant, Selaginella bryopteris
Design and Synthesis of Thermo-Responsive Films with High Sensitivity: Effects of Primary Architectures of Diblock Copolymers and Conditions for Film Formation
Design of dietary polysaccharide and binary monomer mixture of acrylamide and 2-acrylamido-2-methylpropane sulphonic acid based antiviral drug delivery devices
Design of New Chemotherapeutics Against the Deadly Anthrax Disease. Docking and Molecular Dynamics Studies of Inhibitors Containing Pyrrolidine and Riboamidrazone Rings on Nucleoside Hydrolase from Bacillus anthracis
Design of "Eye Closure" system for the stealth of photo-electric equipments
Design and Synthesis of Mimics of the T7-loop of FtsZ
Design of Commercial Ads Dissemination System in Vehicular Environments
Design, implementation, and performance analysis of the WorldFIP/ATM local bridge
Design, Synthesis, Structure-Function Relationship, Bioconversion, and Pharmacokinetic Evaluation of Ertapenem Prodrugs
Design, Synthesis, and Evaluation of Prodrugs of Ertapenem
Design, manufacturing, and performance analysis of mid-infrared achromatic half-wave plates with diamond subwavelength gratings
Design and simulation of double-lightly doped MOSCNT using non-equilibrium Green's function
Design of a High-Performance Half-Bridge Resonant Inverter Using Piezoelectric Transformer for Driving LED
Design of Synchronous Motor with High-temperature Superconductive Field Windings for Marine Propulsion Applications
Design of Least-Squares Time Integrators for Reliable FDTD Simulations
Design and development of a model-based hardware simulator for photovoltaic array
Design and characterization of the VMM1 ASIC for micropattern gas detectors
Design Evolution of an Actuation System for Manipulator Upper Arm Based on TRIZ
Design of Tissue Engineering Implants for Bone Tissue Regeneration of the Basis of New Generation Polylactoglycolide Scaffolds and Multipotent Mesenchymal Stem Cells from Human Exfoliated Deciduous Teeth (SHED Cells)
Design of a Hybrid Power Fed-Converter and Time Controller for LED Traffic Light Systems
Design and Analysis of Downlink Spectrum Sharing in Two-Tier Cognitive Femto Networks
Design of Compact Dual-Polarized 1.2-10 GHz Eleven Feed for Decade Bandwidth Radio Telescopes
Design of Low Power 2.4GHz CMOS Cascode LNA with Reduced Noise Figure for WSN Applications
Design and In Vitro Testing of a Pressure-Sensing Syringe for Endotracheal Tube Cuffs
Design and Characterization of a Wi-Fi Loop Antenna Suitable for in Vivo Experiments
Design and experimental demonstration of a large pedestal thulium-doped fibre
Design, synthesis and cytotoxicity of a new series of isoxazolidines derived from substituted chalcones
Designing a COntext REcommendation System (CORES) for Context Prediction Based on the Dempster-Shafer Theory
Designer Lipids Advance Systemic siRNA Delivery
Design and optimization of self-microemulsifying drug delivery system (SMEDDS) of felodipine for chronotherapeutic application
Design, Characterization, and Modeling for a Modular High-Resolution Solid-State X-Ray Image Intensifier (SSXII)
Designing for Movement Quality in Exergames: Lessons Learned from Observing Senior Citizens Playing Stepping Games
Design and evaluation of folate-appended methyl-beta-cyclodextrin as a new antitumor agent
Design of step composition gradient thin film transistor channel layers grown by atomic layer deposition
Design of a High Fragment Efficiency Library by Molecular Graph Theory
Designing integrated management scenarios using simulation-based and multi-objective optimization: Application to the peach tree-Myzus persicae aphid system
Design and implementation of a microcontroller-based wind energy conversion system
Design, Synthesis, and Characterization of a Single-Chain Peptide Antagonist for the Relaxin-3 Receptor RXFP3
Design of Reverse Converters for the New RNS Moduli Set {2(n)+1, 2(n)-1, 2(n), 2(n-1)+1} (n odd)
Design, Synthesis and Evaluation of Anticonvulsant Activity of Pyridinyl-Pyrrolidones: A Pharmacophore Hybrid Approach
Design and Testing of a Flow Measurement System for an Urban Sewage Drain
Design and test of a new flow calorimeter for online detection of geothermal water heat capacity
Design of an innovative vacuum evaporator system for brine concentration assisted by software tool simulation
Design and test of a single effect thermal desalination plant using waste heat from m-CHP units
Design and simulation of novel adder/subtractors on quantum-dot cellular automata: Radical departure from Boolean logic circuits
Design and study of nano-plasmonic couplers using aluminium arsenide and alumina
Design of a Simple Integrated Coupler for SPP Excitation in a Dielectric Coated Ag Thin Film
Design of Photonic Crystal Triplexer with Core-Shell Rod Defects
Design, Synthesis, and Biological Activity of Urea Derivatives as Anaplastic Lymphoma Kinase Inhibitors
Design of an Adaptive PD Controller for the Weight-Independent Motion Control of a Mobile Robot
Design of an efficient Fresnel-type lens utilizing double total internal reflection for solar energy collection
Design and characterization of submicron formulation for a poorly soluble drug: The effect of Vitamin E TPGS and other solubilizers on skin permeability enhancement
Design of a bumper system for pedestrian lower-leg protection using the Taguchi method
Design Rule for Colloidal Crystals of DNA-Functionalized Particles
Design and characterization of an electronically controlled variable flow rate ejector for fuel cell applications
Design, Synthesis, Biological Screening, and Molecular Docking Studies of Piperazine-Derived Constrained Inhibitors of DPP-IV for the Treatment of Type 2 Diabetes
Design of Wireless Logging Instrument System for Monitoring Oil Drilling Platform
Design, Modeling, and Characterization of a Microelectromechanical Diffuser Device for Laser Speckle Reduction
Design of cylindrically conformed metal reflectarray antennas for millimetre-wave applications
Design and synthesis of 2-N-substituted indazolone derivatives as non-carboxylic acid glycogen synthase activators
Design, synthesis, preliminary pharmacological evaluation, and docking studies of pyrazoline derivatives
Design of two-dimensional photonic crystal-based all-optical binary adder
Design and synthesis of new 1,2,4-triazole derivatives containing morpholine moiety as antimicrobial agents
Design of Plasmonic Nanoparticles for Efficient Subwavelength Light Trapping in Thin-Film Solar Cells
Design, Synthesis, and Pharmacological Evaluation of N-Acylhydrazones and Novel Conformationally Constrained Compounds as Selective and Potent Orally Active Phosphodiesterase-4 Inhibitors
Design, Synthesis, Evaluation and Thermodynamics of 1-Substituted Pyridylimidazo[1,5-a]Pyridine Derivatives as Cysteine Protease Inhibitors
Design of a hybrid double-sideband/single-sideband (schlieren) objective aperture suitable for electron microscopy
Designing product feature upgrades: The role of user processing and design change
Design and synthesis of 4-(1-(4-chlorobenzyl)-2,3-dioxoindolin-5-yl)-1-(4-substituted/unsubstitu ted benzylidene) semicarbazide: Novel agents with analgesic, anti-inflammatory and ulcerogenic properties
Design of self-microemulsifying drug delivery systems using a high-throughput formulation screening system
Design of properties and performances of innovative gas diffusion media for polymer electrolyte membrane fuel cells
Design method for geotextile tubes considering strain - Formulation and verification by laboratory tests using photogrammetry
Designing Continuous Sonic Interaction
Design of a Bioactive Small Molecule That Targets the Myotonic Dystrophy Type 1 RNA via an RNA Motif-Ligand Database and Chemical Similarity Searching
Design of a photonic lattice using shortcuts to adiabaticity
Design and fabrication of compression test rig for fibre-reinforced polymer composites
Design and Fabrication of Microelectromechanical Systems Probe Card with Vertical Trench Guide for Fine Pitch Probing
Design of high-Q cavities in 2D photonic crystals air holes filled with polymer
Design of a 50-Gb/s SOI-Based DPSK Demodulator for Dense Photonic Integration
Design of new highly luminescent Tb3+ complexes using theoretical combinatorial chemistry
Design of a multi-hop dynamic consensus algorithm over wireless sensor networks
Designer Proteins to Trigger Cell Death
Design of a robotic orbital driller for assembling aircraft structures
Design and operation of gas-liquid slug flow in miniaturized channels for rapid mass transfer
Designing optimal discrete-feedback thermodynamic engines
Design of Implanted RFID Tags for Passive Sensing of Human Body: The STENTag
Design optimization of a polygeneration plant producing power, heat, and lignocellulosic ethanol
Design of edge termination on non-uniform 100-V super-junction trench power MOSFET
Design of a just-in-time periodic material supply system for the assembly lines and an application in electronics industry
Design and Implementation of Intelligent Energy Distribution Management with Photovoltaic System
Design of Factor XIII V34X activation peptides to control ability to interact with thrombin mutants
Design of beta-galactosidase/silica biocatalysts: Impact of the enzyme properties and immobilization pathways on their catalytic performance
Design, synthesis, cytocidal activity and estrogen receptor alpha affinity of doxorubicin conjugates at 16 alpha-position of estrogen for site-specific treatment of estrogen receptor positive breast cancer
Design and evaluation in mice of a broadly protective meningococcal group B native outer membrane vesicle vaccine
Design of hydrodynamically confined microfluidics: controlling flow envelope and pressure
Design and Analysis of 3D-MAPS (3D Massively Parallel Processor with Stacked Memory)
Designed to Fail: A Novel Mode of Collagen Fibril Disruption and Its Relevance to Tissue Toughness
Design, synthesis and comparative cytotoxic investigation of platinum(II) complexes with some derivatives of 5-methyl-5-(4-pyridyl)hydantoin
Design and analysis of a hybrid renewable energy plant with solar and wind power
Design and Elaboration of Concrete Mixtures Using Steelmaking Slags
Design of multipliers for GF(2(m)) (vol 46, pg 419, 2010)
Designing for IAQ in Natatoriums
Design, synthesis and docking study of 5-amino substituted indeno[1,2-c]isoquinolines as novel topoisomerase I inhibitors
Design, synthesis and biological evaluation of TAR and cTAR binders as HIV-1 nucleocapsid inhibitors
Designing In Vitro Strategies and In Vivo Models for Alzheimer's Disease - Promises & Challenges
Design of Cross-Linked Semicrystalline Poly(epsilon-caprolactone)-Based Networks with One-Way and Two-Way Shape-Memory Properties through Diels-Alder Reactions
Design of [(2-pyrimidinylthio)acetyl]benzenesulfonamides as inhibitors of human carbonic anhydrases
Design, synthesis, and characterization of a series of biologically active copper(II) Schiff-base coordination compounds
Design of highly absorbing metamaterials for Infrared frequencies
Design of a newly projected light-emitting diode low-beam headlamp based on microlenses
Design of Photonic Crystal Membrane-Reflector-Based VCSELs
Desingularizations of quiver Grassmannians via graded quiver varieties
Design and Pre-Clinical Development of Epitope-based DNA Vaccines Against B-Cell Lymphoma
Design of a Solar Motor Drive System Fed by a Direct-Connected Photovoltaic Array
Design of a waveguide power splitter based on the employment of bi-omega resonators
Design, synthesis of diaminopyrimidine inhibitors targeting IgE- and IgG-mediated activation of Fc receptor signaling
Design of wide-area damping systems based on the capabilities of the supporting Information Communication Technology infrastructure
Design and Fabrication of Vertically-Integrated CMOS Image Sensors
Design, synthesis, and antimicrobial activity of novel spiroisoxazolo[2,3-b][1,2,4]thiadiazole-2,2 '-thiazolidine-4 '-ones and spiroisoxazolo[2,3-b][1,2,4]oxadiazole-2,2 '-thiazolidine-4 '-ones
Design, modeling and performance analysis of carbon nanotube with DNA strands as biosensor for prostate cancer
Design and Development of Digital Control Strategy for Solar Photovoltaic Inverter to Improve Power Quality
Design of an adjustable-stiffness spring: Mathematical modeling and simulation, fabrication and experimental validation
Design principles of sensory receptors
Design and performance of supported Lewis acid catalysts derived from metal contaminated biomass for Friedel-Crafts alkylation and acylation
Design, synthesis and biological evaluation of mannosyl triazoles as FimH antagonists
Design, synthesis and biological evaluation of novel arylpiperazine derivatives on human prostate cancer cell lines
Design and Performance of Rate-Compatible Non-binary LDPC Convolutional Codes
Design, Polymerization, and Properties of High-Performance Seed-Oil-Derived Lubricants
Design and characterization of calcium alginate microparticles coated with polycations as protein delivery system
Design, synthesis, and docking of highly hypolipidemic agents: Schizosaccharomyces pombe as a new model for evaluating alpha-asarone-based HMG-CoA reductase inhibitors
Design, Synthesis and Pharmacological Evaluation of Novel Vanadium-Containing Complexes as Antidiabetic Agents
Design and Fabrication of a One-Transistor/One-Resistor Nonvolatile Binary Content-Addressable Memory Using Perpendicular Magnetic Tunnel Junction Devices with a Fine-Grained Power-Gating Scheme
Design process and data models to support the design of sustainable remanufactured products
Design for remanufacture: a literature review and future research needs
Design, Sensing, and Control of a Scaled Wind Tunnel for Atmospheric Display
Design and Evaluation of Hybrid Digital-Analog Transmission Outperforming Purely Digital Concepts
Design and optimization of shaft-hub hybrid joints for lightweight structures: Analytical definition of normalizing parameters
Design and Synthesis of C-2-Symmetric N-Heterocyclic Carbene Precursors and Metal Carbenoids
Design of functional small interfering RNAs targeting amyotrophic lateral sclerosis-associated mutant alleles
Design of potent bisphosphonate inhibitors of the human farnesyl pyrophosphate synthase via targeted interactions with the active site 'capping' phenyls
Designing effective and efficient incentive policies for renewable energy in generation expansion planning
Design, synthesis and antiepileptic properties of novel 1-(substituted benzylidene)-3-(1-(morpholino/piperidino methyl)-2,3-dioxoindolin-5-yl) urea derivatives
Design of Nonzero Uniformly Sloping Laterals in Trickle Irrigation Systems
Design Support System by Combination of 3D-CAD and CAE with Preference Set-based Design Method
Design of a Plate-Type Catalytic Microreactor with CO2 Permeation Membrane for Water-Gas Shift Reaction
Design of a birefringent Michelson interferometer-based interleaver with ultra-low dispersion and low cost
Design, Engineering, and Construction of Photosynthetic Microbial Cell Factories for Renewable Solar Fuel Production
Design Considerations for using PET as a Response Measure in Single Site and Multicenter Clinical Trials
Design, Synthesis, and Evaluation of a Helicenoidal DMAP Lewis Base Catalyst
Design and Application of Stable Predictive Controller Using Recurrent Wavelet Neural Networks
Design, synthesis, and drug solubilising properties of the first folate-calix[4]arene conjugate
Design of phosphated cross-linked microspheres of bael fruit gum as a biodegradable carrier
Design of N-acyl homoserine lactonase with high substrate specificity by a rational approach
Design and characterization of an enhanced repressor of human papillomavirus E2 protein
Design Study of an Underground Detector for Measurements of the Differential Muon Flux
Design of a P2P content recommendation system using affinity networks
Design and image-quality performance of high resolution CMOS-based X-ray imaging detectors for digital mammography
Designed polyamides based on 1,4-bis[(4-aminophenyl)-1,3,4-oxadiazolyl]phenylene (BAPO) for removal of Cu(II) and Co(II)
Design and synthesis of 2-(1, 3-dioxoisoindolin-2-yl)-N-(4-oxo-2-substitutedthiazolidin-3-yl) acetamide derivatives as potential anticonvulsant agents
Design of Microwave Lossy Filter Based on Substrate Integrated Waveguide (SIW)
Design of a New Low-Pass Filter in the Hairpin Structure with a Chip-Capacitor
Design Study of the Absorber Detector of a Compton Camera for On-Line Control in Ion Beam Therapy
Design rules for suspending concentrated mixtures of solids in stirred tanks
Design and simulation of an all-optical photonic crystal AND gate using nonlinear Kerr effect
Design of proportional-derivative feedback and input shaping for control of inertia plants
Design, synthesis of some new (2-aminothiazol-4-yl)methylester derivatives as possible antimicrobial and antitubercular agents
Design of shape-adaptive wind turbine blades using Differential Stiffness Bend-Twist coupling
Design of a scaled wind turbine with a smart rotor for dynamic load control experiments
Design and testing of a deformable wind turbine blade control surface
Design and Characterization of a Robotized Gearbox System Based on Voice Coil Actuators for a Formula SAE Race Car
Design of massively parallel hardware multi-processors for highly-demanding embedded applications
Design of a formation of solar pumped lasers for asteroid deflection
Design of low power fixed-width multiplier with row bypassing
Design of a composite drug delivery system to prolong functionality of cell-based scaffolds
Design, synthesis and evaluation of retinoids with novel bulky hydrophobic partial structures
Design, Synthesis, and Biological Activity of a Novel Series of Human Sirtuin-2-Selective Inhibitors
Design and Synthesis of New (SecinH3) Derivatives as Potential Cytohesin Inhibitors
Design of Interval Type-2 Fuzzy Set-based Fuzzy Neural Networks and Its Optimization Using Generation-based Evolution
Design and evaluation of gastroretentive levofloxacin floating mini-tablets-in-capsule system for eradication of Helicobacter pylori
Design, modeling, synthesis and biological activity evaluation of camptothecin-linked platinum anticancer agents
Design and Performance Evaluation of MR Damper for Integrated Isolation Mount
Design optimisation of antennas using electromagnetic simulations and adaptive response correction technique
Design, Synthesis, and Antitumor Activity of Novel 5-Pyridyl-1,3,4-oxadiazole Derivatives against the Breast Cancer Cell Line MCF-7
Design method of flow distribution in nuclear reactor systems
Design, simulation and fabrication of piezoelectric micro generators for aero acoustic applications
Design of Stabilizing Control for Synchronous Machines via Polynomial Modelling and Linear Matrix Inequalities Approach
Design and Evaluation of a Cochlear Implant Strategy Based on a "Phantom" Channel
Design and Optimization of a Double-Sided Linear Induction Motor Based on Finite Element Method
Design rules for out-of-plane stability of roller bent steel arches with FEM
Design of Spur-Free Sigma Delta Frequency Tuning Interface for Digitally Controlled Oscillators
Design and Synthesis of 3-Trifluoromethyl-3H-pyrazoles and Further Investigations of Their Transformation to 1H-Pyrazoles
Designs of Silicon MIS Phase Modulator With a Deposited AlN Film as the Gate Dielectric
Design and verification of a single slab RAS through mass production of glass/MWNT added epoxy composite prepreg
Design and analysis of transmission enhanced multi-segment grating in MZI configuration for slow light applications
Design of robust layout for Dynamic Plant Layout Problems
Design of a robust layout with information uncertainty increasing over time: A fuzzy evolutionary approach
Design, synthesis and evaluation of biological activity of novel fasudil analogues
Design of dual inhibitors of ROCK-I and NOX2 as potential leads for the treatment of neuro-inflammation associated with various neurological diseases including autism spectrum disorder
Design Aspects of a Case-Control Clinical Investigation of the Effect of HIV on Oral and Gastrointestinal Soluble Innate Factors and Microbes
Design and syntheses of highly efficient and thermally-stable imidazole chromophores bearing diamino groups for nonlinear optics
Design and cost considerations for practical solar-hydrogen generators
Design of Membrane-Encapsulated Wireless Photoelectrochemical Cells for Hydrogen Production
Design of oncology clinical trials: A review
Design, Synthesis, and Biological Evaluation of Theranostic Vitamin-Linker-Taxoid Conjugates
Designing leadership and soft skills in educational games: The e-leadership and soft skills educational games design model (ELESS)
Designing man-portable power generation systems for varying power demand
Design and fabrication of three-dimensional solid oxide fuel cells
Design of Polymer Scaffolds for Tissue Engineering Applications
Design, synthesis and luminescence properties of Ba2YB2O6Cl- and Ba2YB2O6F-based phosphors
Designs and numerical calculations for echo-enabled harmonic generation at very high harmonics
Design of two-dimensional polarization-selective diffractive optical elements with form-birefringent microstructures
Design of a Mobile Charging Service for Electric Vehicles in an Urban Environment
Desiccation and zinc binding induce transition of tomato abscisic acid stress ripening 1, a water stress- and salt stress-regulated plant-specific protein, from unfolded to folded state
Design and Realization of a Non-Circular Cable Spool to Synthesize a Nonlinear Rotational Spring
Design criteria for optimally tuned nonlinear energy sinks-part 1: transient regime
Design and Analysis of Cross-Layer Contention Resolution Algorithms for Multi-Packet Reception Slotted ALOHA Systems
Design and synthesis of novel bis-annulated caged polycycles via ring-closing metathesis: pushpakenediol
Designer eggs: from improvement of egg composition to functional food
Design and synthesis of ER alpha/ER beta selective coumarin and chromene derivatives as potential anti-breast cancer and anti-osteoporotic agents
Design, programming and orchestration of heterogeneous manufacturing systems through VR-powered remote collaboration
Designing silver carboxylate polymers: Crystal structures of silver-acetyl-benzoate and silver-1,2-benzenedicarboxylate monomethyl ester
Design Challenges in Contact Plans for Disruption-Tolerant Satellite Networks
Design of a shear-thinning recoverable peptide hydrogel from native sequences and application for influenza H1N1 vaccine adjuvant
Design of a data model for social network applications
Design and implementation of spatial database and geo-processing models for a road geo-hazard information management and risk assessment system
Designing sustainable sanitation in urban planning proposed for Changzhou, China
Design of ultrasmall plasmonic coaxial lasers on Si
Design, optimization and fabrication of 2D photonic crystals for solar cells
Designing a new generation of catalysts: Water gas shift reaction example
Design and validation of 2 objective structured clinical examination stations to assess core undergraduate examination skills of the hand and knee
Design and testing of paramagnetic liposome-based CEST agents for MRI visualization of payload release on pH-induced and ultrasound stimulation
Design of high-transmission metallic meander stacks with different grating periodicities for subwavelength-imaging applications
Design of diffractive-phase axicon illuminated by a Gaussian-profile beam
Design and Analysis of Defected Ground Structure for Microwave Planar Filters
Design trade-offs and rules for multiple energy level solar cells
Designing Photonic Materials for Effective Bandgap Modification and Optical Concentration in Photovoltaics
Design of Reversible, Cysteine-Targeted Michael Acceptors Guided by Kinetic and Computational Analysis
Design of a Portable Compliant Device for Estimating the Failure-Load of Mesoscale Cemented Sand Specimens
Design of Binary Polymeric Coatings for Minimizing the Residual Solvent, Part I: Experimentation
Design and Synthesis of Nonionic Copolypeptide Hydrogels with Reversible Thermoresponsive and Tunable Physical Properties
Design and Control of an Integrated 1,4-Butanediol Dehydrogenation and Furfural Hydrogenation Plant
Design of Polarization Splitter With Single-Polarized Elliptical-Hole Core Circular-Hole Holey Fibers
Design Optimization of Ultrasonic Horn for Micro-Pattern Replication
Designing a recombinant chimeric construct contain MUC1 and HER2 extracellular domain for prediagnostic breast cancer
Design of a dual-polarized microstrip patch antenna with excellent polarization purity
Design of ultra-compact triplexer with function-expansion based topology optimization
Design and synthesis of novel carbazole tethered pyrrole derivatives as potent inhibitors of Mycobacterium tuberculosis
Design of integrated hybrid silicon waveguide optical gyroscope
Design for manufacturing: application of collaborative multidisciplinary decision-making methodology
Design and non-covalent DNA binding of platinum(II) metallacalix[4]arenes
Design and fabrication of a TiO2/nano-silicon composite visible light photocatalyst
Design and Evaluation of a Handheld Quantum Key Distribution Sender module
Design of an expert system based on neuro-fuzzy inference analyzer for on-line microstructural characterization using magnetic NDT method
Designing dicyanamide bridged 1D molecular architecture from a mononuclear copper(II) Schiff base precursor: Syntheses, structural variations and magnetic study
Design and operation of manufacturing systems: the control-point policy
Design of Efficient CexM1-xO2-delta (M = Zr, Hf, Tb and Pr) Nanosized Model Solid Solutions for CO Oxidation
Designs for life: protocell models in the laboratory
Design and Synthesis of a MAO-B-Selectively Activated Prodrug Based on MPTP: A Mitochondria-Targeting Chemotherapeutic Agent for Treatment of Human Malignant Gliomas
Designing drugs that overcome antibacterial resistance: where do we stand and what should we do?
Design of artificial myocardial microtissues
Design of Molecular Transformations Based on the Concerted Function of Two Zinc Atoms in Bis(iodozincio)methane
Design and development of distributed control system for SST-1 Thomson scattering experiment
Design and analysis of resonant cavity-enhanced quantum ring inter-subband photodetector with resonant tunneling barriers for terahertz detection
Design and evaluation of a heat exchanger that uses paraffin wax and recycled materials as solar energy accumulator
Design, prototyping, and testing of a compact superconducting double quarter wave crab cavity
Design Method of Dual Phase Hy-Vo Silent Chain Transmission System
Design strategy for improving the energy efficiency in series hydraulic/electric synergy system
Design and fabrication issues on micromachined oxygen sensors for miniaturized energy consumption measurement systems
Design of Z-copy controlled-gain voltage differencing current conveyor based adjustable functional generator
Design of mechanical energy pumping devices
Design and Application on Organic Devices of Thienoisoindigo Based Planar Molecules
Design and Synthesis of Orally Bioavailable Aminopyrrolidinone Histone Deacetylase 6 Inhibitors
Design and synthesis of fluorenone-based dyes: two-photon excited fluorescent probes for imaging of lysosomes and mitochondria in living cells
Designing robust controller to improve current-sharing for parallel-connected inverter-based DGs considering line impedance impact in microgrid networks
Design and optimization of lab-scale sensible heat storage prototype for solar thermal power plant application
Designing Medical Devices Based on Silicon Polymeric Material with Controlled Release of Local Anesthetics
Design of hybrid organic/inorganic adsorbents based on periodic mesoporous silica
Design and Implementation of a 46-kS/s CMOS SC Dual-Mode Capacitive Sensor Interface With 50-dB SNR and 0.7% Nonlinearity
Design and optimization of a proton exchange membrane fuel cell CHP system for residential use
Design and setup of a testing device to investigate a reduced sized attachment system mock up for the ITER EU HCPB-TBM under different mechanical loading conditions
Designing specific cheese-ripening ecosystems to shape the immune effects of dairy products?
Designing the Framework for Competency-Based Master of Public Health Programs in India (vol 19, pg 30, 2013)
Design of co-crystals/salts of some Nitrogenous bases and some derivatives of thiophene carboxylic acids through a combination of hydrogen and halogen bonds
Design of efficient LED optics with two free-form surfaces
Design and operability of a large weighable fen lysimeter
Designing experiments to understand the variability in biochemical reaction networks
Design of a magnesium-pridinolum complex for polylactide-drug conjugates formation
Design for controllability
Design, Synthesis, and Evaluation of Non-ATP-Competitive Small-Molecule Polo-Like Kinase 1 (Plk1) Inhibitors
Designing of a laboratory model for evaluation of the residual effects of deltamethrin (K-othrine WP 5%) on different surfaces against malaria vector, Anopheles stephensi (Diptera: Culicidae)
Designing Public Participation Processes
Design and Analysis of 250-nm AlInN Laser Diodes on AlN Substrates Using Tapered Electron Blocking Layers
Desiccation of plant tissues post-Agrobacterium infection enhances T-DNA delivery and increases stable transformation efficiency in wheat
Design and implementation of a virtual reality system and its application to training medical first responders
Design of electrochemical biosensor systems for the detection of specific DNA sequences in PCR-amplified nucleic acids related to the catechol-O-methyltransferase val1 08/158Met polymorphism based on intrinsic guanine signal
Design, performance, and grounding aspects of the International Thermonuclear Experimental Reactor ion cyclotron range of frequencies antenna
Desipramine activated Bcl-2 expression and inhibited lipopolysaccharide-induced apoptosis in hippocampus-derived adult neural stem cells
Designing polymers for biphasic liquid/liquid separations after homogeneous reactions
Design of improved hydrocracking catalysts by increasing the proximity between acid and metallic sites
Design considerations for polarization-sensitive optical coherence tomography with a single input polarization state
Design and development of a 7kW polymer electrolyte membrane fuel cell stack for UPS application
Design for reliability of multi-layer stretchable interconnects
Design of a new therapy for patients with chronic kidney disease: use of microarrays for selective hemoadsorption of uremic wastes and toxins to improve homeostasis
Design of Substrate-Integrated Lead-Carbon Hybrid Ultracapacitor and Experimental Validation
Design and Development of Stable, Water-Soluble, Human Toll-like Receptor 2 Specific Monoacyl Lipopeptides as Candidate Vaccine Adjuvants
Design, synthesis, and biological evaluation of hybrid molecules containing alpha-methylene-gamma-butyrolactones and alpha-bromoacryloyl moieties
Design of a lens table for a double toroidal electron spectrometer
Design of molecularly imprinted conducting polymer protein-sensing films via substrate-dopant binding
Design and validation of a high-throughput assay to detect codon 146 polymorphisms in the caprine prion protein gene
Design evaluation on sodium piping system and comparison of the design codes
Design and characterization of small thermoelectric generators for environmental monitoring devices
Design of an 8x8 MIMO Broadband RF Subsystem for Future WLAN
Design strategies to address kinetics of drug binding and residence time
Designing Metallic Microlattices for Energy Absorber Applications
Design and fabrication of a hydrodynamic chromatography chip
Design and Laboratory Evaluation of a Sequential Spot Sampler for Time-Resolved Measurement of Airborne Particle Composition
Design of High Performance Photoinitiators at 385-405 nm: Search around the Naphthalene Scaffold
Design of Novel Photoinitiators for Radical and Cationic Photopolymerizations under Near UV and Visible LEDs (385, 395, and 405 nm)
Design and synthesis of dipeptide mimetics of the brain-derived neurotrophic factor
Design and Control of High-Performance Modular Hybrid Asymmetrical Cascade Multilevel Inverters
Designed for deconstruction - poplar trees altered in cell wall lignification improve the efficacy of bioethanol production
Design of multilayered nanostructures and donor-acceptor interfaces in solution-processed thin-film organic solar cells
Design, Synthesis, and Molecular Docking of 1-(1-(4-Chlorophenyl)-2-(phenylsulfonyl) ethylidene)-2-phenylhydrazine as Potent Nonazole Anticandidal Agent
Design of side-stream azeotropic distillation columns
Designing a sociable humanoid robot for interdisciplinary research
Design of Stereoelectronically Promoted Super Lewis Acids and Unprecedented Chemistry of Their Complexes
Design and fabrication of a foldable 3D silicon based package for solid state lighting applications
Design and performance research of an adaptive damper composed of electrorheological fluids and piezoelectric ceramics
Design process modularization: Concept and algorithm
Design and Performance Evaluation of In-home High Throughput Streaming Service with Ethernet and IEEE1394
Design of solder joint structure for flip chip package with an optimized shear test method
Design and construction of a brain phantom to simulate neonatal MR images
Design of a complement mannose-binding lectin pathway-specific activation system applicable at low serum dilutions
Design and coverage-driven verification of a novel network-interface IP macrocell for network-on-chip interconnects
Design of CMOS active bandpass filter with three transmission zeros
Design and Analysis of Planar Photonic Band Gap Devices
Design and evaluation of Mesh-of-Tree based Network-on-Chip using virtual channel router
Design, synthesis and biological evaluation of alpha-substituted isonipecotic acid benzothiazole analogues as potent bacterial type II topoisomerase inhibitors
Designing a cross-language comparison-shopping agent
Design and coordination behavior of the first selective recognition ligand of Pm-147(III)
Design and development of anti-icing textile surfaces
Design of Time-Delay Chaotic Electronic Circuits
Design and application of an electromagnetic vibrator seismic source
Desire for prenatal gender disclosure among primigravidae in Enugu, Nigeria
Design of quinolinedione-based geldanamycin analogues
Design, synthesis, and structure-activity relationships of 1-ethylpyrazole-3-carboxamide compounds as novel hypoxia-inducible factor (HIF)-1 inhibitors
Design optimization of shell and tube heat exchangers using swarm optimization algorithms
Design optimization of shell-and-tube heat exchanger using particle swarm optimization technique
Design of a hybrid ferroelectric thin film varactor for tunable microwave applications
Design and RF Characterization of W-band Meander-Line and Folded-Waveguide Slow-Wave Structures for TWTs
Designer Xylanosomes: Protein Nanostructures for Enhanced Xylan Hydrolysis
Design and Characterization of a Dual-Mode CMOS-MEMS Resonator for TCF Manipulation
Design and Evaluation of 2-DOF Compliant Forceps With Force-Sensing Capability for Minimally Invasive Robot Surgery
Design and characterization of the Magnetized Plasma Interaction Experiment (MAGPIE): a new source for plasma-material interaction studies
Design and analysis of charge-recovery driving circuits for portable peristaltic micropumps with piezoelectric actuators
Design and Implementation of Four-Leg Voltage-Source-Converter-Based VFC for Autonomous Wind Energy Conversion System
Design of a superhydrophobic surface using woven structures
Design and validation of a novel quantitative method for rapid bacterial enumeration using programmed stage movement scanning electron microscopy
Design and Performance Analysis of Mobility Management Schemes Based on Pointer Forwarding for Wireless Mesh Networks
Design and synthesis of phosphorylated pyridine-based ligands for lanthanide complexation. Part 1
Design of superresolving continuous phase filters
Design of continuous superresolving masks for ground-based telescopes
Design and Applications of Bifunctional Small Molecules: Why Two Heads Are Better Than One
Design of extended recursive Wiener fixed-point smoother and filter in discrete-time stochastic systems
Design of an adaptive maximum likelihood estimator for key parameters in macroscopic traffic flow model based on expectation maximum algorithm
Design of tight bends in silicon-on-insulator ridge waveguides
Desirable pharmacokinetic properties of C-13-uracil as a breath test probe of gastric emptying in comparison with C-13-acetate and C-13-octanoate in rats
Design of UWB Planar Antenna With Improved Cut-Off at the Out-of-Band Frequencies
Design of UWB Planar Band-Notched Antenna Using Parasitic Elements
Design for Manufacturing of Sculptured Surfaces: A Computational Platform
Design of a Biological Method for Rapid Detection of Presence of PCR Inhibitors in Aged Bone DNA
Designing a Process Variability Robust Energy-Efficient Control for Complex SoCs
Design of communication interface and control system for intelligent humanoid robot
Design and fabrication of acoustic matching layer for lead-free ultrasonic flowmeter
Design and Modeling of a Clutch Actuator System With Self-Energizing Mechanism
Design optimization of bowtie nanoantenna for high-efficiency thermophotovoltaics
Design, manufacture and geometric verification of rapid prototyped microfluidic encapsulations by computed tomography
Designing Chimeric LOV Photoswitches
Designing market-based control with a genetic algorithm
Design of all-optical time-division multiplexing scheme with the help of microring resonator
Design, Development and Testing of a Low-Cost sEMG System and Its Use in Recording Muscle Activity in Human Gait
Design and processing of a ceramic laminate with high toughness and strong interfaces
Design, fabrication and measurement of a microchannel heat sink with a pin-fin array and optimal inlet position for alleviating the hot spot effect
Design, synthesis and biological evaluation of novel triazole, urea and thiourea derivatives of quinoline against Mycobacterium tuberculosis
Design and Analysis of a State-Feedback-Controlled Hybrid Active Power Filter
Design strategies to tailor the narrow plasmon-photonic resonances in arrays of metallic nanoparticles
Design, synthesis and molecular modelling of novel methyl[4-oxo-2-(aroylimino)-3-(substituted phenyl)thiazolidin-5-ylidene]acetates as potent and selective aldose reductase inhibitors
Design and Evaluation of Multiple-Level Data Staging for Blue Gene Systems
Designing of an artificial neural network model to evaluate the association of three combined Y-specific microsatellite loci on the actual and predicted postthaw motility in crossbred bull semen
Design Earthquake Ground Motion Prediction for Perth Metropolitan Area with Microtremor Measurements for Site Characterization
Desiccation-tolerance specific gene expression in leaf tissue of the resurrection plant Sporobolus stapfianus
Design of microcavity organic light emitting diodes with optimized electrical and optical performance
Design, Prins-cyclization reaction promoting diastereoselective synthesis of 10 new tetrahydropyran derivatives and in vivo antinociceptive evaluations
Design and characterization of a soluble fragment of the extracellular ligand-binding domain of the peptide hormone receptor guanylyl cyclase-C
Design and synthesis of simplified taxol analogs based on the T-Taxol bioactive conformation
Design Methodology of a Permanent Magnet Synchronous Machine for a Screwdriver Application
Design and Synthesis of Novel "Orthogonally" Functionalizable Maleimide-Based Styrenic Copolymers
Design and Analysis of Timing Synchronization in Block Transmission UWB Systems
Design and characterization of an efficient CYP105A1-based whole-cell biocatalyst for the conversion of resin acid diterpenoids in permeabilized Escherichia coli
Design, Manufacture and Characterization of an Acoustic Barrier Made of Multi-Phenomena Cylindrical Scatterers Arranged in a Fractal-Based Geometry
Design of Low Complexity Adjustable Filter Bank for Personalized Hearing Aid Solutions
Design and development of a micro polycrystalline diamond ball end mill for micro/nano freeform machining of hard and brittle materials
Design Rules for IGZO Logic Gates on Plastic Foil Enabling Operation at Bending Radii of 3.5 mm
Design Issues and Considerations for Low-Cost 3-D TSV IC Technology
Design provides single-port-to-dual-port SDRAM converter
Design of an osteoinductive biodegradable cell scaffold based on controlled release technology of bone morphogenetic protein
Designing an ultra-high-speed multiply-accumulate structure
Design, diversity-oriented synthesis and structure activity relationship studies of quinolinyl heterocycles as antimycobacterial agents
Design and Dynamic Analysis of a Novel Biomimetic Robotics Hip Joint
Designing the rectification behavior of molecular diodes
Design and Implementation of Neural Networks Neurons with RadBas, LogSig, and TanSig Activation Functions on FPGA
Design of a Compact Ceramic High-Temperature Heat Exchanger and Chemical Decomposer for Hydrogen Production
Design and simulation of a PWM rectifier connected to a PM generator of micro turbine unit
Design and development challenges for an E2E DRM content business integration platform